SEARCH · Search NASA

Results for “HOT SPOT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS1985

The satellite magnetic anomaly of Ahaggar - Evidence for African Plate motion

The Ahaggar volcanic province of North Central Africa is considered a region of excess heat flow (hot spot) and hence elevated Curie isotherm. Using a modified version of the Parker FFT potential field representation, magnetic signals were calculated at Magsat altitudes for models in which the African Plate is both fixed and moving. The moving-plate model extends the Curie isotherm anomaly in the direction of plate motion and provides a satisfactory match to vertical component anomaly data when the magnitude of plate velocity is 0.75 cm/yr. Although the signal levels are marginal for the scalar component anomalies of this region, the same model provides an adequate match to this data set and is clearly preferable to a fixed-plate model.

Phillips, R. J.↗

NASA NTRS1985

Modeling canopy reflectance and microwave backscattering coefficient

Various approaches to model canopy reflectance (CR) in the visible/infrared region and backscattering coefficient (BSC) in the microwave region are compared and contrasted. It is noted that BSC can be related to CR in the source direction (the 'hot spot' direction). By assuming a frequency dependent leaf reflectance and transmittance it is shown that the observed dependence of BSC on leaf area index, leaf angle distribution, angle of incidence, soil moisture content, and frequency can be simulated by a CR model. Thus both BSC and CR can, in principle, be calculated using a single model which has essentially the same parameters as many CR models do.

Goel, N. S.↗

NASA NTRS1985

Physics and chemistry of sulfur lakes on Io

Based on data from Loki and other hot spot regions, a model for a convecting sulfur lake that is heated from below is constructed. Temperature profiles and fluxes in the silicate and sulfur regions are consistent with the observed Loki highest-temperature component and excess flux. Evaporatin of sulfur sets a strong upper limit on the lake surface temperature, and the intermediate temperature in the Loki region is identified with sulfur vapor condensing primarily along lake shores. Simple models of sulfur vapor transport can be used to match the Voyager IRIS data, assuming sulfur vapor condensed on the shore radiates like a blackbody. The 1 - 100 year lifetime of such a lake in steady state implies that long-term earth-based observations interpreted with this model could detect variations in the Loki thermal output. The sodium-sulfur phase diagram is also presented and used to show that evaporated lakes may leave behind sodium-rich residue which could supply the torus with sodium. Finally, uncertainties in the model are assessed, including the lack of sulfur emission features in the Loki spectrum.

Lunine, J. I.↗

NASA NTRS1986

Radiation physics and modelling for off-nadir satellite-sensing of non-Lambertian surfaces

The primary objective of this paper is to provide a deeper understanding of the physics of satellite remote-sensing when off-nadir observations are considered. Emphasis is placed on the analysis and modeling of atmospheric effects and the radiative transfer of non-Lambertian surface reflectance characteristics from ground-level to satellite locations. The relative importance of spectral, spatial, angular, and temporal reflectance characteristics for satellite-sensed identification of vegetation types in the visible and near-infrared wavelength regions is evaluated. The highest identification value is attributed to angular reflectance signatures. Using radiative transfer calculations to evaluate the atmospheric effects on angular reflectance distributions of vegetation surfaces, atmosphere-invariant angular reflectance features such as the 'hot spot' and the 'persistent valley' are identified. A new atmospheric correction formalism for complete angular reflectance distributions is described. A sample calculation demonstrates that a highly non-Lambertian measured surface reflectance distribution can be retrieved from simulated satellite data in the visible and near infrared to within about 20 percent accuracy for almost all view directions up to 60 deg off-nadir. Thus the high value of angular surface reflectance characteristics (the 'angular signature') for satellite-sensed feature identification is confirmed, which provides a scientific basis for future off-nadir satellite observations.

Gerstl, S. A.↗

NASA NTRS1986

Reliability and engineering sciences area. Materials research: Single junction thin film

A test bench was designed and fabricated for the purpose of improving control of hot-spot test accuracy. Electrochemical corrosion research focused on corrosion mechanisms to which both crystalline and a-Si modules may be subjected in central station applications. A variety of cells and several designs were subjected to accelerated stress tests. Humiditiy degradation rates were determined and key electrochemical failure mechanisms were identified. Software was developed for the prediction of power loss resulting from open circuits in an array field of a-Si modules. Failure analysis was continued on the four ARCO Solar Genesis modules. The interactions of water on the silicon module was examined. An autocatalytic photooxidation model was proposed. The reliability and durability of bonding materials and electrical insulation were also studied.

Source record↗

NASA NTRS1987

CO oxidation studies over supported noble metal catalysts and single crystals: A review

The catalytic oxidation of CO over noble metal catalysts is reviewed. Results obtained on supported noble metal catalysts and single crystals both at high pressures and under UHV conditions are compared. The underlying causes which result in surface instabilities and multiple steady-state oscillations are considered, in particular, the occurrence of hot spots. CO islands of reactivity, surface oxide formation and phase transformations under oscillatory conditions are discussed.

Boecker, Dirk↗

NASA NTRS1987

VLA continuum observations of barred spiral galaxies

Observations of NGC 613, NGC 1300, NGC 4314 and NGC 5383 using the VLA at frequencies of 1464.9 and 4885.1 MHz are reported. These objects are a subset of galaxies from which radio emission were searched. The selection criteria were: (1) they are barred spiral galaxies preferentially with different Hubble type; (2) they have a peculiar or hot spot nucleus; (3) they have been observed at far infrared wavelengths by IRAS; and (4) they are observable from the northern hemisphere. Their radio and far infrared properties are summarized and their composite spectra are shown.

Garcia-Barreto, J. Antonio↗

NASA NTRS1986

On the polarization of Alpha Orionis

Much of the complex behavior of the polarization observed in the M2 supergiant Alpha Ori can be explained in terms of the combined effects of Rayleigh scattering in the photosphere and scattering by circumstellar dust in the presence of one or more photospheric hot spots. The ad hoc scattering layer of electrons which Schwarz and Clarke employed in their models reported in 1984 can be avoided, eliminating the conflict with the much lower column densities found in other studies of the extended chromosphere of this star. The transfer of polarized continuum radiation in cool model atmospheres has been treated fully. Under conditions of optimal spot area and location on the disk and large temperature differences (up to 1000 K) between the spot and normal photosphere, it is possible to get a net polarization up to about 0.3 percent in the blue in the direct starlight. The effects of spot limb darkening on the polarization of scattered spot light have been evaluated. Narrow-band observations that include molecular bands are encouraged for their diagnostic value.

Doherty, L. R.↗

NASA NTRS1986

X-ray and optical observations of the ultrashort period dwarf nova SW Ursae Majoris - A likely new DQ Herculis star

Time-resolved X-ray and optical photometric and optical spectroscopic observations of the ultrashort period cataclysmic variable SW UMa are reported. The spectroscopic observations reveal the presence of an s-wave component which is almost in phase with the extreme line wings and presumably the white dwarf. This very unusual phasing in conjunction with the available optical and X-ray data seems to indicate that a region of enhanced emission exists on the opposite side of the disk from the expected location of the hot spot. The photometric observations reveal the presence of a hump in the light curve occurring at an orbital phase which is consistent with the phase at which the region of enhanced line emission is most favorably seen. Changes in the hump amplitude are seen from night to night, and a 15.9 min periodicity is evident in the light curve. The optical and X-ray periodicities suggest that SW UMa is a member of the DQ Her class of cataclysmic variables.

Shafter, A. W.↗

NASA NTRS1986

A spectroscopic study of the cataclysmic binary star SU Ursae Majoris

Spectroscopic observations of SU UMa, the prototype of a class of short-period cataclysmic binaries, are reported. The orbital period is found to be 0.076351 + or - 4.3 x 10 to the -5th days. The velocity amplitude of the emission line source is 58 + or - 4 km/s, leading to a mass function of about 0.0015 solar mass and implying a moderately low inclination. The line cores in H-alpha and H-beta lead the wings slightly in orbital phase, contrary to the predictions of simple hot spot models of the line core. The velocity widths of the Balmer series increase toward higher members of the series, suggesting that pressure broadening may contribute nonnegligibly to the emission line widths.

Thorstensen, John R.↗

NASA NTRS1986

Model for the 5 March 1979 gamma-ray transient

A model is proposed for the March 5, 1979 gamma-ray transient. A small lump of strange matter, previously ejected from a supernova explosion, struck a slowly rotating strange star. This resulted in a high-intensity flash of radiation from a hot spot produced by the impact. The high-intensity radiation blew open a crater in the crust; the energy released as this crater refilled was responsible for the longer-duration, lower-intensity phase. The 8-s modulation is due to the rotation of the star. A plausible scenario for the production of this event is discussed.

Alcock, Charles↗

NASA NTRS1987

Inferring spectral reflectances of plant elements by simple inversion of bidirectional reflectance measurements

Inverting previously developed explicit expressions for a vertical architecture, bidirectional reflectances measured over corn viewing from the solar quadrant at azimuths near the principal plane are used to determine the spectral reflectances of plant elements. The leaf reflectance values extracted in three visible bands at viewing zenith angles of 70 deg, 60 deg, and 45 deg agree closely with laboratory-measured reflectances of corn leaves. At viewing zenith angle of 30 deg, the inversion breaks down, inasmuch as the inferred plant element reflectances are too high. Satisfactory results are also achieved when the same approach is applied to bidirectional reflectances measured over potted balsam firs, but when applied to soybeans reflectances, the procedure yields unreasonably high leaf reflectances. The failure in this case is attributed to the nonvertical architecture of the soybean canopy; however, for this canopy, inversion based on horizontal architecture is possible. The bidirectional reflectances measured from the solar quadrant, at viewing angles appreciably far from 'hot spot' viewing, approximately equal in magnitude half of the leaf reflectance. The 0.5 ratio is predicted by a previous analysis of opaque horizontal Lambertian facets, as the asymptotic value for a dense canopy at any viewing angle. For soybeans, this ratio applies very closely at 15 deg viewing zenith angle. The results suggest that inversion based on simple architecture, applying explicit expressions, might be of value, either in itself or as a preliminary step before inversion applying complex models.

Otterman, J.↗

NASA NTRS1987

The effect of a shallow low viscosity zone on the apparent compensation of midplate swells

A model for midplate swells is assumed where the swell topography is dynamically maintained by convection beneath a conducting lid. Using an idealized viscosity structure consisting of a low viscosity layer underneath the lid and overlying a constant viscosity region, the effect of the low viscosities, the layer thickness, and the Rayleigh number on the flow and on the inference of a compensation mechanism from the associated gravity, geoid, and topography anomalies is investigated. The calculations show that a simple plume model with stratified viscosity variations of less than two orders of magnitude near the surface can produce the range of depths of compensation seen at midplate swells. Shallow depths of compensation, therefore, cannot be used to argue against dynamic models for the formation of hot spot swells.

Robinson, Elizabeth M.↗

NASA NTRS1988

Measured and calculated acoustic attenuation rates of tuned resonator arrays for two surface impedance distribution models with flow

An experiment was performed to validate two analytical models for predicting low frequency attenuation of duct liner configurations built from an array of seven resonators that could be individually tuned via adjustable cavity depths. These analytical models had previously been developed for high frequency aero-engine inlet duct liner design. In the low frequency application, the liner surface impedance distribution is unavoidably spatially varying by virtue of available fabrication techniques. The characteristic length of this spatial variation may be a significant fraction of the acoustic wavelength. Comparison of measured and predicted attenuation rates and transmission losses for both modal decomposition and finite element propagation models were in good to excellent agreement for a test frequency range that included the first and second cavity resonance frequencies. This was true for either of two surface impedance distribution modeling procedures used to simplify the impedance boundary conditions. In the presence of mean flow, measurements revealed a fine scale structure of acoustic hot spots in the attenuation and phase profiles. These details were accurately predicted by the finite element model. Since no impedance changes due to mean flow were assumed, it is concluded that this fine scale structure was due to convective effects of the mean flow interacting with the surface impedance nonuniformities.

Parrott, Tony L.↗

NASA NTRS1988

Theoretical investigation of EM wave generation and radiation in the ULF, ELF and VLF bands by the electrodynamic orbiting tether

The goal is to extend the previous analysis of electromagnetic wave generation by an electrodynamic tethered satellite system to a more realistic model that includes the effects on wave propagation and reflection to the boundaries between ionosphere, atmosphere, and earth. One of the major activities was searching the scientific literature for publications that might be relevant to the problem. The software developed as SAO to follow the path of waves along field lines through the ionosphere to the atmosphere starting from an arbitary position in the atmosphere is described. Some preliminary results are presented from applying the code to the location of wave reception hot spots on the earth's surface for satellites operating at 300 and 600 km altitudes. A generalization of the Alfven wing analysis is presented to allow for arbitrary angles between the velocity vector, geomagnetic field, and the veritcal. This will be utilized in the modeling of the problem with boundaries included.

Estes, Robert D.↗

NASA NTRS1988

Structural assessment of a space station solar dynamic heat receiver thermal energy storage canister

The structural performance of a space station thermal energy storage (TES) canister subject to orbital solar flux variation and engine cold start up operating conditions was assessed. The impact of working fluid temperature and salt-void distribution on the canister structure are assessed. Both analytical and experimental studies were conducted to determine the temperature distribution of the canister. Subsequent finite element structural analyses of the canister were performed using both analytically and experimentally obtained temperatures. The Arrhenius creep law was incorporated into the procedure, using secondary creep data for the canister material, Haynes 188 alloy. The predicted cyclic creep strain accumulations at the hot spot were used to assess the structural performance of the canister. In addition, the structural performance of the canister based on the analytically determined temperature was compared with that based on the experimentally measured temperature data.

Thompson, R. L.↗

NASA NTRS1987

Interactions between the polar ionosphere and thermosphere

The temperature, composition and circulation of the ionosphere and thermosphere in the polar regions are closely coupled and display a marked variation with altitude, latitude, longitude, universal time, season, solar cycle, and geomagnetic activity. To a large degree, this variation is a consequence of the effect that magnetospheric electric fields, particle precipitation, and heat flows have on the ionosphere-thermosphere system. These magnetospheric processes act to produce ionospheric hot spots, plasma blobs, localized ionization troughs, extended tongues of ionization and ion composition changes. These ionospheric features then affect the thermosphere because of ion-neutral momentum and energy coupling. The resulting interactions act to modify the thermospheric circulation, composition, and temperature, and this, in turn, affects the ionosphere. However, there are significant time delays associated with the various interactions. These and other results are reviewed.

Schunk, R. W.↗

NASA NTRS1988

Structural assessment of a Space Station solar dynamic heat receiver thermal energy storage canister

This paper assesses the structural performance of a Space Station thermal energy storage (TES) canister subject to orbital solar flux variation and engine cold start-up operating conditions. The impact of working fluid temperature and salt-void distribution on the canister structure are assessed. Both analytical and experimental studies were conducted to determine the temperature distribution of the canister. Subsequent finite-element structural analyses of the canister were performed using both analytically and experimentally obtained temperatures. The Arrhenius creep law was incorporated into the procedure, using secondary creep data for the canister material, Haynes-188 alloy. The predicted cyclic creep strain accumulations at the hot spot were used to assess the structural performance of the canister. In addition, the structural performance of the canister based on the analytically-determined temperature was compared with that based on the experimentally-measured temperature data.

Tong, M. T.↗