Search NASA⌕ Search

SEARCH · Search NASA

Results for “ILLUMINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Orion Cabin Lighting System: Filter Workaround for Maintaining Crew Circadian Entrainment

Introduction: Suboptimal crew circadian entrainment (CCE) is common and results in cumulative fatigue and reduced cognitive function. This may promote use of psychostimulants and hypnotics. The Orion Cabin Lighting System (OCLS) consists of 15 dimmable lamps circuited to several zones. The OCLS monochromatic white lamp design is insufficient for maintaining CCE. While blue light (480-nm) elicits peak wake-cycle response, it is a powerful disruptor of CCE. We propose OCLS lamp filters (OLFs) as a workaround for maintaining CCE. Methods: Preliminary OLFs testing utilized a tunable-white LED to serve as a baseline lamp in the NASA Lighting Lab’s controlled environment (prototype OCLS lamps were unavailable). Illuminance and spectral irradiances were measured with the NASA Lighting Lab’s spectroradiometer. ConOps is proposed for OLFs. Results: OLFs markedly attenuated 480-nm light and illumination with minimal mass/volume requirements. ConOps includes in-flight deployment of OLFs and reducing OCLS lamp intensity prior to bedtime. Pros: minimal mass/volume, no added power, and a simplistic design. Cons: manual twice-daily articulation of OLFs, undetermined frangibility/flammability/off-gassing and effects on thermal regulation, and untested task illumination or color fidelity in the Orion cabin. Discussion: While OLFs aptly attenuate 480-nm light from our tunable LED lamp in the Lighting Lab’s controlled environment, they remain untested within the Orion cabin on OCLS lamps. Future tests include Orion cabin illumination optimization for appropriate Lux delivery and ensuring task/color fidelity with OLFs deployed. Adequate OCLS cooling should be similarly assessed. Other safety testing includes OLF frangibility/flammability/off-gassing in an enriched-O 2 /hypobaric environment. Together, these data will demonstrate OLFs provide a viable workaround for maintaining CCE further ensuring mission safety and success.

Carlos Rene Dostal↗
NASA NTRS2014

Sedimentology of Martian Gravels from Mardi Twilight Imaging: Techniques

Quantitative sedimentologic analysis of gravel surfaces dominated by pebble-sized clasts has been employed in an effort to untangle aspects of the provenance of surface sediments on Mars using Curiosity's MARDI nadir-viewing camera operated at twilight Images have been systematically acquired since sol 310 providing a representative sample of gravel-covered surfaces since the rover departed the Shaler region. The MARDI Twilight imaging dataset offers approximately 1 millimeter spatial resolution (slightly out of focus) for patches beneath the rover that cover just under 1 m2 in area, under illumination that makes clast size and inter-clast spacing analysis relatively straightforward using semi- automated codes developed for use with nadir images. Twilight images are utilized for these analyses in order to reduce light scattering off dust deposited on the front MARDI lens element during the terminal stages of Curiosity's entry, descent and landing. Such scattering is worse when imaging bright, directly-illuminated surfaces; twilight imaging times yield diffusely-illuminated surfaces that improve the clarity of the resulting MARDI product. Twilight images are obtained between 10-30 minutes after local sunset, governed by the timing of the end of the no-heat window for the camera. Techniques were also utilized to examine data terrestrial locations (the Kau Desert in Hawaii and near Askja Caldera in Iceland). Methods employed include log hyperbolic size distribution (LHD) analysis and Delauney Triangulation (DT) inter-clast spacing analysis. This work extends the initial results reported in Yingst et al., that covered the initial landing zone, to the Rapid-Transit Route (RTR) towards Mount Sharp.

sedimentologic↗
NASA NTRS1971

Lighting factors affecting the visibility of a moving display.

Compensatory tracking performance was shown to be substantially degraded by oscillation of the visual display at both 1.0 and 2.0 Hz. The severity of this decrement was altered significantly by changes in both the color and the intensity of the display illumination. Performance was significantly better with red light illuminating the display at 0.05 mL than with blue light at the equivalent luminance. This improvement in performance was similar in magnitude to that found for an increase in broad-band illumination of the display where luminance was increased from 1/2 log unit below to 1/2 log unit above 0.05 mL. Visual mechanisms that may have been responsible for these findings are suggested.

Gilson, R. D.↗
NASA NTRS1971

Comparison of SLAR images and small-scale, low-sun aerial photographs.

A comparison of side-looking airborne radar (SLAR) images and black and white aerial photos of similar scale and illumination of an area in the Mojave Desert of California shows that aerial photos yield far more information about geology than do SLAR images because of greater resolution, tonal range, and geometric fidelity, and easier use in stereo. Nevertheless, radar can differentiate some materials or surfaces that aerial photos cannot; thus, they should be considered as complementary, rather than competing tools in geologic investigations. The most significant advantage of SLAR, however, is its freedom from the stringent conditions of weather, date, and time that are required by small-scale aerial photos taken with a specified direction and angle of illumination. Indeed, in low latitudes, SLAR is the only way to obtain small-scale images with low illumination from certain directions; moreover, in areas of nearly continuous cloudiness, radar may be the only practical source of small-scale images.

Clark, M. M.↗
NASA NTRS1972

Spectral reflectance and emittance of Apollo 11 and 12 lunar material.

The thermal radiation properties of Apollo 11 and 12 fines (soils) are reviewed and presented as a function of wavelength, angle of illumination, and bulk density. The spectral directional reflectance is presented for wavelengths from 0.6 to 2 microns and for angles of illumination of 10, 20, 30, 45, and 60 deg. The normal emittance is presented for wavelengths from 2.5 to 14.5 microns. The solar albedo and total normal emittance as a function of temperature were calculated from the spectral values. The solar albedo for Apollo 11 fines is 0.099 whereas for Apollo 12 fines is approximately 0.119 for angles of illumination of 10 deg and a density of 1600 kg cu m.

Birkebak, R. C.↗
NASA NTRS1973

Mariner Mars 1971 sun sensor model development and simulation

The sun sensor flight performance data were analyzed along with the results of a newly developed cruise sensor life in order to better understand cadmium sulfide sun sensor performance. A set of mathematical models was constructed which closely approximated the observed sun sensor flight and laboratory test results. These models revealed, among other things, that (1) the aging phenomena in the sintered cadmium sulfide light detector varies across the detector width in proportion to the illumination history, (2) the current cruise sun sensor design is extremely sensitive to changes in the reflected illumination within the sensor housing, (3) the reflected illumination within the detector housing is proportional to the area and intensity of the solar disk observed at the spacecraft, and (4) the acquisition sun sensor becomes a low impedance path across the sensor bridge when in the vicinity of a large-angular-diameter, low-intensity light source.

Schumacher, L.↗
NASA NTRS1973

Conical quadreflex antenna analytical study

A method for evaluating the performance of a four-reflection or quadreflex antenna is reported. Geometrical optics was used initially to determine the ideal feed pattern required to produce uniform illumination on the aperture of the conical reflector and the reverse problem of quickly finding the aperture illumination given an arbitrary feed pattern. The knowledge of the aperture illumination makes it possible to compute the antenna efficiency, which is useful for comparing antenna performance during tradeoff studies. Scattering calculations, using physical optics techniques, were then used to more accurately determine the performance of a specific design.

Cramer, P. W., Jr.↗
NASA NTRS1975

Comparison of Skylab and Landsat Lineaments with Joint Orientations in Northcentral Pennsylvania

The author has identified the following significant results. The histogram peaks of lineaments mapped from Skylab photograph at a scale of 1:517,000 lie subparallel, within 20 deg, to major shale joints and coal cleats on part of the Allegheny Plateau. The Landsat lineament, mapped at 1:989,000 are biased by illumination and scan line directions. While there is an illumination bias in the Skylab photograph, its direction does not coincide with the main transverse lineament trend, thus providing an independent assessment of the illumination direction bias. The coincidence in direction regardless of scale of the linear features suggests a mechanical relationship between joints, fracture traces, and lineaments which is more consistent with a tensional model than a shear model of origin.

Mcmurtry, G. J.↗
NASA NTRS1975

7.5 kW solar array simulator

A high power solar array simulator capable of providing the input power to simultaneously operate two 30 cm diameter ion thruster power processors was designed, fabricated, and tested. The maximum power point may be set to between 150 and 7500 watts. This represents an open circuit voltage from 50 to 300 volts and a short circuit current from 4 to 36 amps. Illuminated solar cells are used as the control element. The illuminated solar cells provide a true solar cell characteristic and permit the option of simulating changes in this characteristic due to variations in solar intensity and/or temperature of the solar array. This is accomplished by changing the illumination and/or temperature of the control cells. The response of the output to a step change in load closely approximates that of an actual solar array.

Robson, R. R.↗
NASA NTRS1976

Research in large adaptive antenna arrays

The feasibility of microwave holographic imaging of targets near the earth using a large random conformal array on the earth's surface and illumination by a CW source on a geostationary satellite is investigated. A geometrical formulation for the illuminator-target-array relationship is applied to the calculation of signal levels resulting from L-band illumination supplied by a satellite similar to ATS-6. The relations between direct and reflected signals are analyzed and the composite resultant signal seen at each antenna element is described. Processing techniques for developing directional beam formation as well as SNR enhancement are developed. The angular resolution and focusing characteristics of a large array covering an approximately circular area on the ground are determined. The necessary relations are developed between the achievable SNR and the size and number of elements in the array. Numerical results are presented for possible air traffic surveillance system. Finally, a simple phase correlation experiment is defined that can establish how large an array may be constructed.

Berkowitz, R. S.↗
NASA NTRS1977

Demand-controlled lighting

Automatic lighting is controlled by photocell that measures intensity of available light. Photocell drives motor which operates mercury switches controlling indoor illumination sources. Device effects increase in indoor illumination intensity when illumination input to cell is insufficient. Reverse is true if input is too great.

Owens, L. J.↗
NASA NTRS1977

An antenna for limited scan in one plane - Design criteria and numerical simulation

Aperture illumination is synthesized through the use of overlapping subarrays with independently controlled excitations. Detailed analysis and design criteria are provided for a specific limited-scan antenna configuration scanning in one plane. The number of phase shifts is the theoretical minimum corresponding to specified aperture size and field of view. Beam pointing and width are approximately constant for moderate frequency variation, and ultralow sidelobes outside the field of view can be produced at the cost of a slight loss of illumination efficiency. Accurate aperture illumination control makes for excellent independently specified sum and difference patterns in beamforming.

Borgiotti, G. V.↗
NASA NTRS1977

MIS diode structure in As/+/ implanted CdS

Structure made by As implantation of carefully prepared high-conductivity CdS surfaces followed by Pt deposition and 450 C anneal display rectifying, although substantially different, I-V characteristics in the dark and during illumination with subband-gap light. Structures prepared in the same way on an unimplanted portion of the substrate have similar I-V characteristics, except that the forward turnover voltage for an illuminated unimplanted diode is much smaller than that for an implanted diode. It is suggested that the charge conduction in both structures is dominated by hole and/or electron tunneling through a metal-semiconductor potential barrier. The tunneling processes appear to be quite sensitive to subband-gap illumination, which causes the dramatic decreases of turnover voltages and apparent series resistances. The difference in turnover voltage appears to be caused by interface states between the Pt electrode and the implanted layer, which suggests a MIS model.

Hutchby, J. A.↗
NASA NTRS1980

Characterization of reflected light from the space power system

Sunlight reflected off large space structures is examined. To assure that this illumination does not exceed the irradiance tolerances of the eye, reflections from these satellites must be controlled by vehicle orientation and surface specifications. The components of various space power system vehicles to determine the reflectances which will significantly contribute to the ground illumination are evaluated. Calculations of reflected solar intensity from various satellite system elements requires description of the elements and of the geometry potential reflectance paths. Surface intensity and the conditions under which it will illuminate a portion of the Earth are also determined.

Liemohn, H. B.↗
NASA NTRS1982

Measurement potential of laser speckle velocimetry

Laser speckle velocimetry, the measurement of fluid velocity by measuring the translation of speckle pattern or individual particles that are moving with the fluid, is described. The measurement is accomplished by illuminating the fluid with consecutive pulses of Laser Light and recording the images of the particles or the speckles on a double exposed photographic plate. The plate contains flow information throughout the image plane so that a single double exposure may provide data at hundreds or thousands of points in the illuminated region of the fluid. Conventional interrogation of the specklegram involves illuminating the plate to form Young's fringes, whose spacing is inversely proportional to the speckle separation. Subsequently the fringes are digitized and analyzed in a computer to determine their frequency and orientation, yielding the velocity magnitude and orientation. The Young's fringe technique is equivalent to performing a 2-D spatial correlation of the double exposed specklegram intensity pattern, and this observation suggests that correlation should be considered as an alternative processing method. The principle of the correlation technique is examined.

Adrian, R. J.↗
NASA NTRS1982

Planar multijunction high voltage solar cell chip

A new innovative planar multijunction solar cell chip for concentrated sunlight applications is proposed. The chip consists of many voltage-generating regions, called unit cells, which are connected in series within a single silicon wafer, thereby providing a high open-circuit voltage at multiple sun illumination levels. The unit cells are fabricated on 75 micron thick p-type single crystal silicon substrate. Each chip consists of 1.42 x 9.63 mm n(+)/p collecting junctions on the back of the wafer, while the illuminated front surface area is divided into 0.3 micron deep n(+) regions. The fabrication sequence includes standard degreasing and cleaning procedures, double-sided alignment photomasking, introduction of boron and phosphorus impurities, and photolithography. The open circuit voltage of the chip increased rapidly with illumination up to about 4 AM1 suns, and then began to saturate at the sum of the individual unit cell voltages of 3.5 above 4 AM1 suns. A short circuit density per unit cell of 300 mA/sq cm at 20 AM1 suns was observed.

Valco, G. J.↗
NASA NTRS1983

Beam area determination for multiple-beam satellite communication applications

An exact analytical model and a simple numerical solution are presented for determining the surface area of the earth illuminated by a conical beam, with an elliptical cross section, emanating from a satellite. The model is used to generate sets of parametric curves for determination of the beam area as a function of the different satellite locations, beam locations, and beamwidths. Numerical results show that for a circular beam with a 0.25 deg beamwidth, the beam illuminating the northern Continental United States (CONUS) can cover an area about five times larger than the area covered by the same size beam illuminating the southern CONUS. Comparisons are also made with the available approximate methods.

Salmasi, A. B.↗
NASA NTRS1983

Evaluation of the effects of the seasonal variation of solar elevation angle and azimuth on the processes of digital filtering and thematic classification of relief units

The effects of the seasonal variation of illumination over digital processing of LANDSAT images are evaluated. Two sets of LANDSAT data referring to the orbit 150 and row 28 were selected with illumination parameters varying from 43 deg to 64 deg for azimuth and from 30 deg to 36 deg for solar elevation respectively. IMAGE-100 system permitted the digital processing of LANDSAT data. Original images were transformed by means of digital filtering so as to enhance their spatial features. The resulting images were used to obtain an unsupervised classification of relief units. Topographic variables (declivity, altitude, relief range and slope length) were used to identify the true relief units existing on the ground. The LANDSAT over pass data show that digital processing is highly affected by illumination geometry, and there is no correspondence between relief units as defined by spectral features and those resulting from topographic features.

Parada, N. D. J.↗