Search NASA⌕ Search

SEARCH · Search NASA

Results for “IMPACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Energy and Momentum in Mechanical Impact Testing

The ASTM G86 method is used to determine the ignition sensitivity of materials to mechanical impact in oxygen. It has long been known that different systems built to the standard produce different results. Given the current push towards direct comparison of numerical results from different systems rather than just material rankings, it is desirable to normalize the systems to some performance-based metric. Normalization is complicated by the fact that the energy and momentum of a particular impact scale differently with plummet mass and drop height, and therefore adjusting the mass and height to account for system differences would result in a different impact. The standard uses dent blocks to assess impacts. However, it was unknown if the differences in momentum could be identified during dent block impacts. To determine this, dent blocks were impacted with constant energy and different momentums, using instrumented and non-instrumented plummets. The dent blocks showed statistically significant differences in the penetration function when subjected to impacts with the same energy but different momentum. Further, the instrumented plummet showed drastic differences in the power delivery with different momentums. System configuration was also shown to have an effect on the response of the penetration function to different momentums.

Energy↗
DOE OSTI2025

Multi-objective automatic discovery of optimized metamaterials for varying velocity impact protection

Mechanical metamaterials have demonstrated exceptional impact performance while remaining lightweight. Impact resistance has traditionally been investigated using quasi-static simulations, often with the assumption that performance will translate to high-velocity impact scenarios. However, critical crash protection parameters—such as peak stress and absorbed energy—are highly sensitive to impact velocity, leading to inconsistent performance under dynamic loading. To address this, we introduce a strain-rate-aware, active deep learning framework that enables multi-objective optimization of impact protection metrics across a wide range of impact velocities. Our framework captures the strain-rate sensitivity of architected lattices by learning to control spatial gradation in cellular metamaterials, resulting in over 200 % enhancement in impact protection relative to state-of-the-art designs such as Voronoi and re-entrant lattices. We demonstrate its practical utility by designing next-generation lattice structures for automotive bumper systems that satisfy multiple, velocity-specific safety criteria—capabilities beyond those of conventional designs. More than just a predictive tool, this framework marks the first step towards enabling adaptable impact-resistant structures across dynamic regimes.

Deep learning↗
NASA NTRSDate not supplied

TEM and XRD Investigation of Impact Glass Alteration Products: Amorphous Materials, Phyllosilicates and Everything in Between

Impact cratering is one of the most ubiquitous geologic processes shaping the surface of all solid bodies in our solar system. Impacts are also a major source of clay minerals and poorly crystalline, clay-like materials on Earth and Mars[1,2].These phyllosilicates and related clay-like phases comprise an incredibly complex group of materials, and their characterization, even in controlled laboratory settings, remains a challenging endeavor. The nature and origin of clay minerals and amorphous materials on Mars, which form a major component (~20-70 wt %) of rock and soil samples in Gale Crater as determined by the CheMin instrument on Curiosity, have remained ambiguous[3]. These amorphous phases likely fall on a spectrum between pristine volcanic and/or impact-produced primary materials and clay minerals and related phases formed from aqueous alteration. Amorphous materials are common weathering products in terrestrial sediments, soils, and paleosols [e.g., 4,5].Primary impact materials (glass, melt rocks)are comparable in some ways to those generated volcanically [6], and so it may be possible that an amorphous component is preserved within altered impactites. There are hundreds of thousands of impact craters on Mars, and Curiosity and Perseverance are currently exploring ancient impact craters. We hypothesize that the sediments and lithologies in Gale and Jezero Craters and elsewhere contain altered impact products; it is therefore important to better understand the composition and structure of these materials. Here we present the first results from a study characterizing materials produced from impact glass alteration–clay minerals, poorly crystalline/amorphous materials–in terrestrial craters using Transmission Electron Microscopy (TEM), powder X-ray diffraction (pXRD)and chemical (EDS) analysis.

Impact crater↗
NASA NTRS2022

Impacts of Climate Change on Global Food Trade Networks

Countries' reliance on global food trade networks implies that regionally different climate change impacts on crop yields will be transmitted across borders. This redistribution constitutes a significant challenge for climate adaptation planning and may affect how countries engage in cooperative action. This paper investigates the long-term (2070–2099) potential impacts of climate change on global food trade networks of three key crops: wheat, rice and maize. We propose a simple network model to project how climate change impacts on crop yields may be translated into changes in trade. Combining trade and climate impact data, our analysis proceeds in three steps. First, we use network community detection to analyse how the concentration of global production in present-day trade communities may become disrupted with climate change impacts. Second, we study how countries may change their network position following climate change impacts. Third, we study the total climate-induced change in production plus import within trade communities. Results indicate that the stability of food trade network structures compared to today differs between crops, and that countries' maize trade is least stable under climate change impacts. Results also project that threats to global food security may depend on production change in a few major global producers, and whether trade communities can balance production and import loss in some vulnerable countries. Overall, our model contributes a baseline analysis of cross-border climate impacts on food trade networks.

climate change↗
NASA NTRSDate not supplied

High Resolution Imaging and Analysis of Terrestrial Impact Glass: Amorphous Materials, Phyllosilicates and Everything in Between

Introduction: Impact cratering is one of the most ubiquitous geologic processes shaping the surface of all solid bodies in our solar system. Impacts are also a major source of clay minerals, poorly crystalline clay-like phases and amorphous (i.e., lacking long-range atomic order) materials on Earth and Mars. Phyllosilicates and amorphous materials have consistently formed a major component (~20-70 wt%) of every single drilled rock and soil sample in Gale Crater on Mars, as determined by the CheMin instrument on Curiosity. The origin of the amorphous component is speculative, but could be primary impact or volcanic-produced glass(es) deposited via aeolian or fluvial processes, secondary aqueous alteration products or chemical precipitates; it is likely to be a combination of all three possibilities. Efforts to determine the composition of these materials across the rover’s traverse through Gale Crater are ongoing. Naturally occurring amorphous phases are found in a variety of environments on Earth, and terrestrial analogue studies may help shed light on how they may have formed on Mars. Primary and altered impact glass are likely widespread on Mars and may have contributed to the amorphous component found throughout Gale Crater. In its pristine, unaltered state, impact glass (i.e., melt glass) is considered amorphous. However, truly unaltered glass is rarely preserved in crater fill impactites as it quickly alters in the post-impact environ-ment, commonly forming a mixture of hydrated aluminosilicate phases whose structures are not always discernable at the microscale (i.e., they may be amorphous or contain short-range order). These phases are part of an incredibly complex group of materials; differences in their composition and crystalline structure (or lack thereof) and genetic relationship to the more well-crystalline clay minerals are often only discernable at the nanoscale, beyond the resolution of traditional X-ray diffractometers (XRD) and scanning electron microscopes/microprobes (SEM/EPMA) alone. In this contribution, we summarize recent results from ongoing characterization of clay minerals, poorly crystalline clay-like phases, and amorphous materials preserved in altered terrestrial impact glass from the Chicxulub (~66 Ma) and Ries (~15 Ma) impact structures. This work has been performed using a combination of high-resolution transmission electron microscopy (HR-TEM), SEM, microprobe/EPMA, Raman spectroscopy and XRD.

Impact crater↗
NASA NTRSDate not supplied

IMPACT, a Tool Suite for Crew Health and Performance System Trade Analyses and Decision Support - Status of Development

Mission planners, systems engineers, and clinicians that support crew health and performance face very difficult choices on upcoming exploration missions. Given that there will be a heavily constrained mass and volume allocation for a medical system on these missions, what medical capability should be manifested to minimize both medical risk and mission risk? Given that not all promising research and technology proposals can be funded, how can proposals be prioritized so that those funded research investments produce the maximum benefit in reducing overall medical risk? The Informing Mission Planning via Analysis of Complex Tradespaces (IMPACT) project seeks to answer these kinds of questions and others to support upcoming exploration missions. IMPACT enables risk-informed and evidence-based trade space analysis for future space vehicles, missions, and systems. This presentation will discuss the long-term HRP and ExMC vision for the larger ecosystem of tools, which include an updated medical database, consisting of an Evidence Library for medical conditions and a medical item database (MedID) for medical resources, dynamic Probabilistic Risk Assessment (PRA) capabilities, System Modeling Language (SysML) models, and contextual data visualizations of output data. IMPACT is the result of a multi-center collaborative effort. The trade space analyses performed by IMPACT can directly inform mission, vehicle, and habitat development by quantifying medical risk, given a design reference mission, crew attributes and a set of medical capabilities. This presentation will update the audience on the development status of the tool suite as it nears its System Acceptance Review (SAR). It will review IMPACT’s constituent parts, briefly discuss typical outputs and outline the plans for transitioning to operations, currently scheduled for later in FY23. Recent development successes on the IMPACT project include the integration of the Medical Extensible Dynamic Probabilistic Risk Assessment Tool (MEDPRAT) v2.0 to accommodate segmented missions with multiple carriers and medical systems, full onboarding of the IMPACT Medical Database (IMPACT-MD), clustering medical resources and skills into medical capabilities and mutually-dependent bundles, and the ability to perform trade analyses on different medical sets, different design reference missions (DRM), with different crew complements and extra-vehicular activity (EVA) schedule.

IMPACT↗
NASA NTRS2024

Hopkinson Bar Impact Force Measurement for Application to Development of an Artificial Bird

A test method has been published for measuring forces from bird cadavers and artificial birds to demonstrate equivalency to support the use of artificial birds in aircraft certification testing. The test method involves a large diameter Hopkinson bar as the technique for measuring and comparing forces. The method involves the assumption that a force on one end of the bar results in a one-dimensional plane wave that travels down the bar. To avoid reflected waves from the end of the bar overlapping the input pulse, and due to practical limitations on the length of the bar, strain transducers are located relatively close to the impacted face of the bar, raising questions about the validity of the assumption of one-dimensional wave propagation. In addition, the large diameter of the bar can introduce dispersion effects in the propagated pulse. These must be assessed to determine the impact on the accuracy of impact force measurements and, if significant, dispersion correction techniques must be used. In this study analytical, experimental, and computational methods are used to analyze the wave propagation characteristics for impact forces expected from realistic bird impacts. While wave dispersion and effects of non-concentric impacts are present, the resulting errors are relatively small. For the response we expect to see in bird impacts up to velocities of approximately 300 m/sec the large diameter Hopkinson bar test appears to be an acceptable method for measuring the impact forces and comparing the response of real and proposed artificial birds.

Birdstrike↗
DOE OSTI2025

The impact of climate change on Korea’s agricultural sector under the national self-sufficiency policy

Evolving environmental conditions due to climate change have brought about changes in agriculture, which is required for human life as both a source of food and income. International trade can act as a buffer against potential negative impacts of climate change on crop yields, but recent years have seen breakdowns in global trade, including export bans to improve domestic food security. For countries that rely heavily on imported food, governments may institute policies to protect their agricultural industry from changes in climate-induced crop yield changes and other countries’ potential trade restrictions. This study assesses the individual and combined effects of climate impacts and food self-sufficiency policies in Korea, which is highly dependent on imports. We use the Global Change Analysis Model (GCAM), a global integrated assessment model, to explore (1) the direct impact of climate change on Korea’s agricultural yields, (2) the full impacts of global climate change on agricultural production, including trade-induced changes due to yield changes in other regions, (3) the impacts of food self-sufficiency policy, and (4) the interactive impact of climate change and self-sufficiency policies. We find that, in Korea, the direct impact of climate change on agricultural yields would be overshadowed by the impact of global climate change due to changing trade patterns. Second, global climate change leads to a rise (rice and wheat) or a decline (soybeans) in Korean producer revenues, while simultaneously raising consumer expenditures on both staples and non-staples. Third, implementing self-sufficiency policies for wheat and soybeans in Korea boosts the nation’s producer revenues, in conjunction with the effects of climate change, at the cost of additional increases in consumer expenditures for both staples and non-staples.

Science & Technology - Other Topics↗
DOE OSTI2025

The Missing Correlation Between the Potential Rate Impacts of Rooftop Solar and the Timing of State Net Metering Policy Revisions

Data supporting the article “The Missing Correlation Between the Potential Rate Impacts of Rooftop Solar and the Timing of State Net Metering Policy Revisions” (https://www.nlr.gov/docs/fy25osti/93543.pdf). Residential solar photovoltaic (PV) output in most states is credited at the retail electricity rate, a policy commonly known as net metering. Twelve states have replaced net metering with alternative rate structures that reduce PV adopter bill savings. Proponents of these revisions argue that net metering increases the electricity rates of customers without PV. Here, we analyze the degree to which the timelines of net metering revisions have correlated with potential electricity rate impacts. We estimate that potential rate impacts at the end of 2023 were less than 1% of typical customer bills in 37 of 44 states that have offered net metering. There are no statistically significant differences in average or median estimated rate impacts between states that have and have not revised net metering. Nine of the states that had revised net metering did so when estimated impacts were less than 1% of typical customer bills. Many states have retained net metering into higher PV deployment levels with increased risk of potential rate impacts. Only two states-California and Hawaii-retained net metering beyond estimated rate impacts of 5%, and both have revised net metering. These findings do not suggest a clear, consistent link between net metering revision timelines and potential rate impacts. The timing and nature of net metering revisions are ultimately policy decisions based on state-level priorities and considerations.

14 SOLAR ENERGY↗
NASA NTRS1973

Study of impact cratering in lunar-like materials

Electrostatically accelerated microparticles are used to perform simulated micrometeoroid impact cratering experiments in oligoclase. Impact craters were obtained using iron, lanthanum hexaboride, and silicon as the projectile materials. Each particle material was impacted at normal incidence and at 30 and 60 deg oblique angles. Tabular data for all impacts are presented and central crater pit diameter normalized to particle diameter and the total spall diameter normalized to particle diameter are plotted vs impact velocity for nine particle/angle combinations and three crystal orientations. Impact crater characteristics are photodocumented as a function of impact velocity for the nine particle/angle combinations and three crystal orientations in oligoclase and at fixed impact velocity for six other minerals.

Roy, N. L.↗
NASA NTRS1974

Impact cratering models and their application to lunar studies - A geologist's view

Impact cratering models are discussed which were derived from: (1) laboratory hypervelocity experiments in cohesive materials; (2) laboratory impact experiments in noncohesive materials such as sand; and (3) terrestrial meteorite impact craters (specifically the Ries Crater, the largest well-preserved terrestrial meteorite crater). Salient features of these three categories of models are compared in order to point out unresolved controversies and inconsistencies. Arguments and evidence are presented to support the conclusions that (1) penetrations of secondary impacts are insignificant and are not likely to stir up much local material, (2) the laboratory hypervelocity experiments are perhaps the best model for lunar glass-lined microcraters, (3) laboratory impact experiments in noncohesive materials such as sand are the best model for impacts in lunar regolith, and (4) the Ries is considered the best model for large lunar impact craters. From analogy with the Ries, it appears that lateral and low-angle transport of ejecta and accelerated lateral growth are important in formation of large impact craters.

Chao, E. C. T.↗
NASA NTRS1979

Impact melting early in lunar history

The total amount of impact melt produced during early lunar history is examined in light of theoretically and experimentally determined relations between crater diameter (D) and impact melt volume. The time dependence of the melt production is given by the time dependent impact rate as derived from cratering statistics for two different crater-size classes. Results show that small scale cratering (D less than or equal to 30 km) leads to melt volumes which fit selected observations specifying the amount of impact melt contained in the lunar regolith and in craters with diameters less than 10 km. Larger craters (D greater than 30 km) are capable of forming the abundant impact melt breccias found on the lunar surface. The group of large craters (D greater than 30 km) produces nearly 10 times as much impact melt as all the smaller craters, and thus, the large impacts dominate the modification of the lunar surface. A contradiction between the distribution of radiometric rock ages and a model of exponentially decreasing cratering rate going back to 4.5 b.y. is reflected in uncertainty in the distribution of impact melt as a function of time on the moon.

Lange, M. A.↗
NASA NTRS1985

Impact processes and their implications for planetary formation and early evolution

Small impact craters dominate the geomorphology of small planetary bodies. Even Mars has extensive impact-dominated landscapes. The regoliths of the Moon and asteroids are created and maintained by impacts. It is now widely recognized that large impacts (craters 100-1000 km in diameter) are one of the major tectonic elements in the lithospheres of bodies like the Moon, Mercury, Mars and Callisto. The multiring basins these large impacts produce sometimes extend over an entire hemisphere. Such basins may have also affected tectonics during the Earth's hadean era. Although it has long been appreciated that low velocity collisions played a major role in the accretion of planetesimals into planets, recent work indicates a far more profound role for impacts. Studies of the interaction of planetary atmospheres with large impacts, begun in an effort to define the climatological effects of the K-T impactor, suggest that impacts may remove a significant fraction of a planet's atmosphere. Such removal now offers hope of explaining the puzzling systematics of the heavy noble gases in the atmospheres of the Earth, Venus, and Mars.

Melosh, H. J.↗
NASA NTRS1986

Impact and residual fatigue behavior of ARALL and AS6/5245 composite materials

Aramide fiber reinforced aluminum laminates (ARALL) represent a cross between resin matrix composites and metals. The purpose of this study was to evaluate the impact sensitivity of this concept. Two types of ARALL (7075 aluminum prestrained and 2024 aluminum not prestrained) were tested through static indentation and the results compared to sheet 2024-T3 and 7075-T6 aluminum alloys. A state-of-the-art composite (AS6/5245) was also tested and compared to the ARALL. Further, the two types of ARALL material and the composite were dynamically impacted at two energy levels and fatigue tested to determine residual fatigue strength. Both forms of the ARALL material had worse impact resistance than monolithic sheet aluminum. The ARALL material made with 2024-T3 aluminum had better impact resistance than did the laminates made with 7075-T6 aluminum. The ARALL materials are at least equal to the composite material in impact damage resistance and are better for impact detection. The composite material has higher residual fatigue strength after impact than the ARALL material and is 25 percent lighter. The prestraining of the ARALL greatly reduces the fatigue growth of impact damage.

Johnson, W. S.↗
NASA NTRS1988

Late Eocene impact events recorded in deep-sea sediments

Raup and Sepkoski proposed that mass extinctions have occurred every 26 Myr during the last 250 Myr. In order to explain this 26 Myr periodicity, it was proposed that the mass extinctions were caused by periodic increases in cometary impacts. One method to test this hypothesis is to determine if there were periodic increases in impact events (based on crater ages) that correlate with mass extinctions. A way to test the hypothesis that mass extinctions were caused by periodic increases in impact cratering is to look for evidence of impact events in deep-sea deposits. This method allows direct observation of the temporal relationship between impact events and extinctions as recorded in the sedimentary record. There is evidence in the deep-sea record for two (possibly three) impact events in the late Eocene. The younger event, represented by the North American microtektite layer, is not associated with an Ir anomaly. The older event, defined by the cpx spherule layer, is associated with an Ir anomaly. However, neither of the two impact events recorded in late Eocene deposits appears to be associated with an unusual number of extinctions. Thus there is little evidence in the deep-sea record for an impact-related mass extinction in the late Eocene.

Glass, B. P.↗
NASA NTRS1988

Computer modeling of large asteroid impacts into continental and oceanic sites: Atmospheric, cratering, and ejecta dynamics

Numerous impact cratering events have occurred on the Earth during the last several billion years that have seriously affected our planet and its atmosphere. The largest cratering events, which were caused by asteroids and comets with kinetic energies equivalent to tens of millions of megatons of TNT, have distributed substantial quantities of terrestrial and extraterrestrial material over much or all of the Earth. In order to study a large-scale impact event in detail, computer simulations were completed that model the passage of a 10 km-diameter asteroid through the Earth's atmosphere and the subsequent cratering and ejecta dynamics associated with impact of the asteroid into two different targets, i.e., an oceanic site and a continental site. The calcuations were designed to broadly represent giant impact events that have occurred on the Earth since its formation and specifically represent an impact cratering event proposed to have occurred at the end of Cretaceous time. Calculation of the passage of the asteroid through a U.S. Standard Atmosphere showed development of a strong bow shock that expanded radially outward. Behind the shock front was a region of highly shock compressed and intensely heated air. Behind the asteroid, rapid expansion of this shocked air created a large region of very low density that also expanded away from the impact area. Calculations of the cratering events in both the continental and oceanic targets were carried to 120 s. Despite geologic differences, impacts in both targets developed comparable dynamic flow fields, and by approx. 29 s similar-sized transient craters approx. 39 km deep and approx. 62 km across had formed. For all practical purposes, the atmosphere was nearly completely removed from the impact area for tens of seconds, i.e., air pressures were less than fractions of a bar out to ranges of over 50 km. Consequently, much of the asteroid and target materials were ejected upward into a near vacuum. Effects of secondary volcanism and return of the ocean over hot oceanic crater floor could also be expected to add substantial solid and vaporized material to the atmosphere, but these conditions were not studied.

Roddy, D. J.↗
NASA NTRS1989

Simulation of flexible structures with impact: Experimental validation

The simulation of the dynamic behavior of flexible structures with impact, is experimentally and numerically investigated. A radially rotating flexible beam attached to a rigid shaft is considered. Both experimental and numerical studies are undertaken. Experimental studies how excellent agreement with simulation studies using both the momentum balance (coefficient of friction), and spring-dashpot (impact pair) models. The simulation studies are even capable of predicting the high-speed multiple impacts which occur due to structural flexibility and which are experimentally observed using high-speed video photography. The results of the studies show that a simple momentum balance (coefficient of restitution) method for simulating the impact is sufficiently accurate in predicting the dynamic behavior of the system for most engineering applications. The momentum balance method cannot simulate the impact force which develops during the contact duration, but is computationally very efficient. The spring-dashpot model is more difficult to develop and requires significantly larger computation time, but can simulate impact forces and stresses due to impact. The momentum balance (coefficient of restitution) method, although strictly not applicable to flexible bodies, has been shown to provide an accurate and computationally efficient method for simulating the dynamic behavior of flexible structures with impact when contact stresses are not needed.

Ulsoy, A. Galip↗
NASA NTRS1990

Final Environmental Impact Statement for the Ulysses Mission (Tier 2)

This Final (Tier 2) Environmental Impact Statement (FEIS) addresses the environmental impacts which may be caused by implementation of the Ulysses mission, a space flight mission to observe the polar regions of the Sun. The proposed action is completion of preparation and operation of the Ulysses spacecraft, including its planned launch at the earliest available launch opportunity on the Space Transportation System (STS) Shuttle in October 1990 or in the backup opportunity in November 1991. The alternative is canceling further work on the mission. The Tier 1 EIS included a delay alternative which considered the Titan 4 launch vehicle as an alternative booster stage for launch in 1991 or later. This alternative was further evaluated and eliminated from consideration when, in November 1988, the U.S. Air Force, which procures the Titan 4, notified that it could not provide a Titan 4 vehicle for the 1991 launch opportunity because of high priority Department of Defense requirements. The Titan 4 launch vehicle is no longer a feasible alternative to the STS/Inertial Upper Stage (IUS)/Payload Assist Module-Special (PAM-S) for the November 1991 launch opportunity. The only expected environment effects of the proposed action are associated with normal launch vehicle operation and are treated elsewhere. The environmental impacts of normal Shuttle launches were addressed in existing NEPA documentation and are briefly summarized. These impacts are limited largely to the near-field at the launch pad, except for temporary stratospheric ozone effects during launch and occasional sonic boom effects near the landing site. These effects were judged insufficient to preclude Shuttle launches. There could also be environmental impacts associated with the accidental release of radiological material during launch, deployment, or interplanetary trajectory injection of the Ulysses spacecraft. Intensive analysis indicates that the probability of release is small. There are no environmental impacts in the no-action alternative; however, the U.S. Government and the European Space Agency would suffer adverse fiscal and programmatic impacts if this alternative were adopted. The scientific benefits of the mission would be delayed and possibly lost. There could be significant impacts on the ability of the U.S. to negotiate international agreements for cooperative space activities.

Source record↗