Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERCHANGEABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Reduced model simulations of the scrape-off-layer heat-flux width and comparison with experiment

Reduced model simulations of turbulence in the edge and scrape-off-layer (SOL) region of a spherical torus or tokamak plasma are employed to address the physics of the scrape-off-layer heat flux width. The simulation model is an electrostatic two-dimensional fluid turbulence model, applied in the plane perpendicular to the magnetic field at the outboard midplane of the torus. The model contains curvature-driven-interchange modes, sheath losses, and both perpendicular turbulent diffusive and convective (blob) transport. These transport processes compete with classical parallel transport to set the SOL width. Midplane SOL profiles of density, temperature and parallel heat flux are obtained from the simulation and compared with experimental results from the National Spherical Torus Experiment (NSTX) to study the scaling of the heat flux width with power and plasma current. It is concluded that midplane turbulence is the main contributor to the SOL heat flux width for the low power H-mode discharges studied, while additional physics is required to explain the plasma current scaling of the SOL heat flux width observed experimentally in higher power discharges. Intermittent separatrix spanning convective cells are found to be the main mechanism that sets the near-SOL width in the simulations. The roles of sheared flows and blob trapping vs. emission are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Blob-induced toroidal momentum transport in simple magnetized plasmas

The link between toroidal flows and density blobs is experimentally demonstrated in TORPEX simple magnetized plasmas: momentum is transferred from an ideal-interchange mode to density blobs. The phase shift between the toroidal flow and the density perturbations observed in the interchange mode where the blob is born is conserved along the blob radial trajectory. This leads to dipolar structures of the blob-induced flow or to monopolar perturbations, so large that the toroidal flow gets transiently reversed. The turbulent toroidal momentum flux is dominated either by the nonlinear flux or by the convective part but not by the Reynolds stress component.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A magnetospheric energy principle extended to include neutral atmosphere

The problem of ideal magnetohydrodynamic stability of plasmas in a magnetosphere-atmosphere system, in which the unperturbed magnetic field is assumed to be perpendicular to the plasma-atmosphere interface (ionospheric surface), is investigated by means of an extended magnetospheric energy principle. The derivation of the principle and conditions under which it applies to a real terrestrial magnetosphere is given. In the principle, the atmosphere is considered to be a very heavy and compressible gas with finite pressure. A thin ionospheric layer is taken into account as boundary conditions, but energetics within it are neglected. The solid-earth surface is assumed to be a perfectly conducting wall for perturbations. For a perturbation that satisfies either rigid or horizontally free boundary conditions at the plasma-atmosphere interface, the self-adjointness of the force operator is satisfied and an extended magnetospheric energy principle can be developed on the basis of the extended energy principle for fusion plasmas. These two boundary conditions are shown to be realized in the magnetosphere when the ionospheric conductivity is either very large or very small. Whereas in fusion plasmas the perturbed magnetic energy in the vacuum makes a stabilizing contribution to the potential energy, in the magnetosphere the perturbed magnetic energy in the atmosphere makes no such stabilizing contribution. This is due to the difference of the assumed field configurations of the magnetospheric and fusion plasmas. The ionospheric surface makes a destabilizing negative contribution to the potential energy owing to a horizontal plasma displacement on the spherical ionospheric surface. The method is applied to magnetospheric ballooning and interchange instabilities. The existence of a new type of magnetospheric interchange instability is shown and its structure in the magnetosphere-atmosphere system is clarified. Possible consequences of the instabilities and their relevance to magnetospheric physics are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of pressure-driven MHD instabilities on confinement in reactor-relevant high-beta helical plasmas

Through the experiment data analysis in the large helical device (LHD), the influence of the global MHD instability and the relatively short wave length MHD instabilities driven turbulence on the confinement performance in reactor-relevant high-beta helical plasmas is studied. The comparison of the energy confinement time between just before global MHD instability disappears and after that, and the estimation of the saturated mode structure by the multi-channel soft x-ray measurement enable us to quantitatively estimate the influence of the global interchange type MHD instability with different saturated mode structures on the confinement performance. According to the comparison between thermal conductivities in experiments and those predicted by theoretical transport models, the transport properties in the peripheral region of high beta LHD plasmas are quite similar with anomalous transport model based on an interchange type MHD instability driven turbulence, and that result is supported by the dependence of the density fluctuation with relatively short wave length on beta value.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Suprathermal ion transport in simple magnetized torus configurations

Inspired by suprathermal ion experiments in the basic plasma experiment TORPEX, the transport of suprathermal ions in ideal interchange mode turbulence is theoretically examined in the simple magnetized torus configuration. We follow ion tracer trajectories as specified by ideal interchange mode turbulence imported from a numerical simulation of drift-reduced Braginskii equations. Using the variance of displacements, {sigma}{sup 2}(t){approx}t{sup {gamma}}, we find that {gamma} depends strongly on suprathermal ion injection energy and the relative magnitude of turbulent fluctuations. The value of {gamma} also changes significantly as a function of time after injection, through three distinguishable phases: ballistic, interaction, and asymmetric. During the interaction phase, we find the remarkable presence of three regimes of dispersion: superdiffusive, diffusive, and subdiffusive, depending on the energy of the suprathermal ions and the amplitude of the turbulent fluctuations. We contrast these results with those from a 'slab' magnetic geometry in which subdiffusion does not occur during the interaction phase. Initial results from TORPEX are consistent with data from a new synthetic diagnostic used to interpret our simulation results. The simplicity of the simple magnetized torus makes the present work of interest to analyses of more complicated contexts ranging from fusion devices to astrophysics and space plasma physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stability of compressible reduced magnetohydrodynamic equilibria-Analogy with magnetorotational instability

Stability analyses for equilibria of the compressible reduced magnetohydrodynamics (CRMHD) model are carried out by means of the Energy-Casimir (EC) method. Stability results are compared with those obtained for ideal magnetohydrodynamics (MHD) from the classical {delta}W criterion. An identification of the terms in the second variation of the free energy functional for CRMHD with those of {delta}W is made: two destabilizing effects present for CRMHD turn out to correspond to the kink and interchange instabilities in usual MHD, while the stabilizing roles of field line bending and compressibility are also identified in the reduced model. Also, using the EC method, stability conditions in the presence of toroidal flow are obtained. A formal analogy between CRMHD and a reduced incompressible model for magnetized rotating disks, due to Julien and Knobloch [EAS Pub. Series, 21, 81 (2006)], is discovered. In light of this analogy, energy stability analysis shows that the condition for magnetorotational instability (MRI) for the latter model corresponds to the condition for interchange instability in CRMHD, with the Coriolis term and shear velocity playing the roles of the curvature term and pressure gradient, respectively. Using the EC method, stability conditions for the rotating disk model, for a large class of equilibria with possible non-uniform magnetic fields, are obtained. In particular, this shows it is possible for the MRI system to undergo, in addition to the MRI, another instability that is analogous to the kink instability. For vanishing magnetic field, the Rayleigh hydrodynamical stability condition is recovered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Filament velocity scaling laws for warm ions

The dynamics of filaments or blobs in the scrape-off layer of magnetic fusion devices are studied by magnitude estimates of a comprehensive drift-interchange-Alfvén fluid model. The standard blob models are reproduced in the cold ion case. Even though usually neglected, in the scrape-off layer, the ion temperature can exceed the electron temperature by an order of magnitude. The ion pressure affects the dynamics of filaments amongst others by adding up to the interchange drive and the polarisation current. It is shown how both effects modify the scaling laws for filament velocity in dependence of its size. Simplifications for experimentally relevant limit regimes are given. These are the sheath dissipation, collisional, and electromagnetic regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

New insights on boundary plasma turbulence and the quasi-coherent mode in Alcator C-Mod using a Mirror Langmuir Probe

A new “Mirror Langmuir Probe” diagnostic, combined with a double-coil scanning magnetic probe, is used to interrogate Alcator C-Mod's quasi-coherent mode (QCM) with unprecedented detail. In ohmic EDA H-modes, the QCM is found to reside in a region of positive radial electric field, with a radial width (∼3 mm) that spans open and closed field line regions. Large amplitude, in-phase sinusoidal bursts (∼100 kHz) in density, electron temperature, and plasma potential are observed, with potential lagging density by ∼16°, producing an outward radial transport velocity of ∼10 m/s. Mode propagation corresponds to the sum of local E × B and electron diamagnetic drift velocities. Poloidal magnetic field fluctuations project to current filaments carrying peak current densities of ∼25 A/cm{sup 2}. An evaluation of parallel electron force balance (Ohm's law) over a fluctuation cycle indicates a significant electromotive component. Interchange drive is also a contributor in the current continuity (vorticity) equation. Thus, the QCM is primarily a separatrix-spanning electron drift-wave with interchange and electromagnetic contributions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A signature for turbulence driven magnetic islands

We investigate the properties of magnetic islands arising from tearing instabilities that are driven by an interchange turbulence. We find that such islands possess a specific signature that permits an identification of their origin. We demonstrate that the persistence of a small scale turbulence maintains a mean pressure profile, whose characteristics makes it possible to discriminate between turbulence driven islands from those arising due to an unfavourable plasma current density gradient. We also find that the island poloidal turnover time, in the steady state, is independent of the levels of the interchange and tearing energy sources. Finally, we show that a mixing length approach is adequate to make theoretical predictions concerning island flattening in the island rotation frame.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling the effect of lithium-induced pedestal profiles on scrape-off-layer turbulence and the heat flux width

The effect of lithium (Li) wall coatings on scrape-off-layer (SOL) turbulence in the National Spherical Torus Experiment (NSTX) is modeled with the Lodestar SOLT (SOL Turbulence) code. Specifically, the implications for the SOL heat flux width of experimentally observed, Li-induced changes in the pedestal profiles are considered. The SOLT code used in the modeling has been expanded recently to include ion temperature evolution and ion diamagnetic drift effects. This work focuses on two NSTX discharges occurring pre- and with-Li deposition. The simulation density and temperature profiles are constrained, inside the last closed flux surface only, to match those measured in the two experiments, and the resulting drift-interchange-driven turbulence is explored. The effect of Li enters the simulation only through the pedestal profile constraint: Li modifies the experimental density and temperature profiles in the pedestal, and these profiles affect the simulated SOL turbulence. The power entering the SOL measured in the experiments is matched in the simulations by adjusting “free” dissipation parameters (e.g., diffusion coefficients) that are not measured directly in the experiments. With power-matching, (a) the heat flux SOL width is smaller, as observed experimentally by infrared thermography and (b) the simulated density fluctuation amplitudes are reduced with Li, as inferred for the experiments as well from reflectometry analysis. The instabilities and saturation mechanisms that underlie the SOLT model equilibria are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Significant enhancement of compositional and superconducting homogeneity in Ti rather than Ta-doped Nb 3 Sn

Nb 3 Sn wires are now very close to their final optimization but despite its classical nature, detailed understanding of the role of Ta and Ti doping in the A15 is not fully understood. Long thought to be essentially equivalent in their influence on H c2 , they were interchangeably applied. Here we show that Ti produces significantly more homogeneous chemical and superconducting properties. Despite Ta-doped samples having a slightly higher T c onset in zero-field, they always have a wider Tc-distribution. In particular, whereas the Ta-doped A15 has a T c -distribution extending from 18 down to 5-6 K (the lowest expected Tc for the binary A15 phase), the Ti-doped samples have no A15 phase with T c below ~12 K. The much narrower T c distribution in the Ti-doped samples has a positive effect on their in-field T c -distribution too, leading to an extrapolated μ0 H c2 (0) 2 Tesla larger than the Ta-doped one. Ti-doping also appears to be very homogeneous even when the Sn content is reduced in order to inhibit breakdown of the diffusion barriers in very high J c conductors. As a result, the enhanced homogeneity of the Ti-doped samples appears to result from its assistance of rapid diffusion of Sn into the filaments and by its incorporation into the A15 phase interchangeably with Sn on the Sn sites of the A15 phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Site-mixing effect on the XMCD spectrum in double perovskite Bi 2 FeMnO 6

We investigate magnetization in double perovskite multiferroic Bi 2 FeMnO 6 (BFMO) thin film using density functional theory (DFT) simulations, and X-ray magnetic circular dichroism (XMCD) measurements. The exchange interaction between Fe and Mn sites gives rise to a ferrimagnetic ordering in BFMO. When grown without structural defects, distinct XMCD signal is expected from this system. The site resolved magnetization, thus, can be extracted using XMCD sum rules. Although our theoretical calculations are consistent with this expectation for the ideal BFMO system, experimental measurements find evidence of anomalous peak for the L 2 and L 3 edges of XMCD signals, and thus, the XMCD sum rules are no longer valid. We theoretically explain this phenomenon by considering both tetragonal (near interface), and monoclinic (bulk) phases of BFMO system, with Fe and Mn ions interchanged between their respective sites. Such site-mixing between magnetic cations are commonly found during the synthesis process. Our DFT calculations of XMCD for site interchanged Fe and Mn ions in the bulk phase (monoclinic) of BFMO are in good agreement with experimental XMCD signal and reproduce the anomalous peak features at L 2 /L 3 edges.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The National Ignition Facility modular Kirkpatrick-Baez microscope

Current two-dimensional X-ray imaging at the National Ignition Facility (NIF) uses time resolved pinhole cameras with ∼10-25 μm pinholes. This method has limitations in the smallest resolvable features that can be imaged with reasonable photon statistics for inertial confinement fusion (ICF) applications. ICF sources have a broadband self-emission spectrum that causes the pinhole images obtained, through thin foil filters, to contain a similarly broadband spectrum complicating the interpretation of structure in the source. In order to study phenomena on the scale of ∼5 μm, such as dopant mix in the ICF capsule, a narrow energy band, higher spatial resolution microscope system with improved signal/noise has been developed using X-ray optics. Utilizing grazing incidence mirrors in a Kirkpatrick-Baez microscope (KBM) configuration [P. Kirkpatrick and A. V. Baez, J. Opt. Soc. Am. 38, 766–774 (1948)], an X-ray microscope has been designed and fielded on NIF with four imaging channels. The KBM has ∼12 × magnification, <8 μm resolution, and higher throughput in comparison to similar pinhole systems. The first KBM mirrors are coated with a multilayer mirror to allow a “narrow band” energy response at 10.2 keV with ΔE ∼ 3 keV. By adjusting the mirror coating only, the energy response can be matched to the future experimental requirements. Several mirror packs have been commissioned and are interchangeable in the diagnostic snout.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On discriminating tokamak sawtooth crash models via localized density and temperature measurements

The core electron temperature drops rapidly during the sawtooth crash in tokamak plasmas, which causes heat loss and may lead to fast particle losses or even a disruption. Several models have been proposed for the periodic crash, including the Kadomtsev model with magnetic reconnection and the quasi-interchange model with the growth of higher-mode-number pressure-driven instabilities. 3D MHD simulations were performed for these two models with a goal to develop intuition and to predict qualitatively how different types of sawtooth will appear in various diagnostics. The structures of electron density ne and electron temperature Te show a dominant (1, 1) mode for the Kadomtsev case and a dominant (4, 4) mode for the quasi-interchange case. The oscillations of ne and Te have a positive correlation near the inversion layer for both cases, while their frequencies and amplitudes are different depending on the dominant modes. Particularly, for the Kadomtsev case, we find a relation between the amount of flux reconnected during a sawtooth event and ne or Te oscillations. Therefore, we connect recently developed measurement capabilities for ne and Te to the internal sawtooth behavior. We propose that this method of analysis can help in identifying the type of sawtooth in future experiments augmented by simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DYNAMICS OF VERTICAL THREADS AND DESCENDING KNOTS IN A HEDGEROW PROMINENCE

The existence and behavior of vertical fine structures of plasma-threads and knots-are a significant observational clue to understanding the magnetic structure and dynamics of quiescent prominences on the quiet Sun. Based on the equation of motion in ideal MHD, we reason that the non-hydrostatic support of plasma against gravity in general requires either the motion of plasma with a high value of downward acceleration (dynamical support) or the role of horizontal magnetic fields (magnetic support). By carefully tracking the motion of several bright threads seen in a hedgerow prominence observed by the Solar Optical Telescope aboard Hinode, we confirm that these threads are essentially static and stable, which negates the dynamic support. The application of the Kippenhahn-Schlueter solution suggests that they may be supported by sagged magnetic field lines with a sag angle of about 43{sup 0}. We also track several bright descending knots and find that their descending speeds range from 10 to 30 km s{sup -1}, with a mean value of 16 km s{sup -1}, and their vertical accelerations from -0.10 to 0.10 km s{sup -2}, with a mean of practically zero. This finding suggests that these knots are basically supported by horizontal magnetic fields against gravity even when they descend, and the complex variations of their descending speeds should be attributed to small imbalances between gravity and the force of magnetic tension. Furthermore, some knots are observed to impulsively get accelerated downward from time to time. We conjecture that these impulsive accelerations are a result of magnetic reconnection and the subsequent interchange of magnetic configuration between a knot and its surrounding structure. It is proposed that this process of reconnection and interchange not only initiates the descending motion of the knots, but also allows knots to keep falling long distance through the medium permeated by horizontal magnetic fields.

79 ASTRONOMY AND ASTROPHYSICS↗

A RECONNECTION-DRIVEN RAREFACTION WAVE MODEL FOR CORONAL OUTFLOWS

We conduct numerical experiments to determine whether interchange reconnection at high altitude coronal null points can explain the outflows observed as blueshifts in coronal emission lines at the boundaries between open and closed magnetic field regions. In this scenario, a strong, post-reconnection pressure gradient forms in the field-aligned direction when dense and hot, active region core loops reconnect with neighboring tenuous and cool, open field lines. We find that the pressure gradient drives a supersonic outflow and a rarefaction wave develops in both the open and closed post-reconnection magnetic field regions. We forward-model the spectral line profiles for a selection of coronal emission lines to predict the spectral signatures of the rarefaction wave. We find that the properties of the rarefaction wave are consistent with the observed velocity versus temperature structure of the corona in the outflow regions, where the velocity increases with the formation temperature of the emission lines. In particular, we find excellent agreement between the predicted and observed Fe XII 195.119 A spectral line profiles in terms of the blueshift (10 km s{sup -1}), full width at half-maximum (83 mA) and symmetry. Finally, we find that T{sub i} < T{sub e} in the open field region, which indicates that the interchange reconnection scenario may provide a viable mechanism and source region for the slow solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

NUMERICAL SIMULATIONS OF THE MAGNETIC RAYLEIGH-TAYLOR INSTABILITY IN THE KIPPENHAHN-SCHLUeTER PROMINENCE MODEL. I. FORMATION OF UPFLOWS

The launch of the Hinode satellite led to the discovery of rising plumes, dark in chromospheric lines, that propagate from large ({approx}10 Mm) bubbles that form at the base of quiescent prominences. The plumes move through a height of approximately 10 Mm while developing highly turbulent profiles. The magnetic Rayleigh-Taylor instability was hypothesized to be the mechanism that drives these flows. In this study, using three-dimensional (3D) MHD simulations, we investigate the nonlinear stability of the Kippenhahn-Schlueter prominence model for the interchange mode of the magnetic Rayleigh-Taylor instability. The model simulates the rise of a buoyant tube inside the quiescent prominence model, where the interchange of magnetic field lines becomes possible at the boundary between the buoyant tube and the prominence. Hillier et al. presented the initial results of this study, where upflows of constant velocity (maximum found 6 km s{sup -1}) and a maximum plume width Almost-Equal-To 1.5 Mm which propagate through a height of approximately 6 Mm were found. Nonlinear interaction between plumes was found to be important for determining the plume dynamics. In this paper, using the results of ideal MHD simulations, we determine how the initial parameters for the model and buoyant tube affect the evolution of instability. We find that the 3D mode of the magnetic Rayleigh-Taylor instability grows, creating upflows aligned with the magnetic field of constant velocity (maximum found 7.3 km s{sup -1}). The width of the upflows is dependent on the initial conditions, with a range of 0.5-4 Mm which propagate through heights of 3-6 Mm. These results are in general agreement with the observations of the rising plumes.

79 ASTRONOMY AND ASTROPHYSICS↗

NUMERICAL SIMULATIONS OF THE MAGNETIC RAYLEIGH-TAYLOR INSTABILITY IN THE KIPPENHAHN-SCHLUeTER PROMINENCE MODEL. II. RECONNECTION-TRIGGERED DOWNFLOWS

The launch of the Hinode satellite has allowed high-resolution observations of supersonic bright downflows in quiescent prominences, known as prominence knots. We present observations in the Ca II H spectral line using the Solar Optical Telescope on board the Hinode satellite of a descending plasma knot of size {approx}900 km. The knot initially undergoes ballistic motion before undergoing impulsive accelerations at the same time as experiencing increases in intensity. We also present a subset of our three-dimensional magnetohydrodynamic simulations, performed to investigate the nonlinear stability of the Kippenhahn-Shlueter prominence model to the magnetic Rayleigh-Taylor instability in which interchange reconnection occurs. The interchange reconnection in the model breaks the force balance along the field lines which initiates the downflows. The downflows propagate with a downward fluid velocity of {approx}15 km s{sup -1} and a characteristic size of {approx}700 km. We conclude that the observed plasma blob and the simulated downflow are driven by the breaking of the force balance along the magnetic field as a result of a change in magnetic topology caused by reconnection of the magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗