Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTEREST GROUPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Dosimetric characterization and output verification for conical brachytherapy surface applicators. Part I. Electronic brachytherapy source

Purpose: Historically, treatment of malignant surface lesions has been achieved with linear accelerator based electron beams or superficial x-ray beams. Recent developments in the field of brachytherapy now allow for the treatment of surface lesions with specialized conical applicators placed directly on the lesion. Applicators are available for use with high dose rate (HDR){sup 192}Ir sources, as well as electronic brachytherapy sources. Part I of this paper will discuss the applicators used with electronic brachytherapy sources; Part II will discuss those used with HDR {sup 192}Ir sources. Although the use of these applicators has gained in popularity, the dosimetric characteristics including depth dose and surface dose distributions have not been independently verified. Additionally, there is no recognized method of output verification for quality assurance procedures with applicators like these. Existing dosimetry protocols available from the AAPM bookend the cross-over characteristics of a traditional brachytherapy source (as described by Task Group 43) being implemented as a low-energy superficial x-ray beam (as described by Task Group 61) as observed with the surface applicators of interest. Methods: This work aims to create a cohesive method of output verification that can be used to determine the dose at the treatment surface as part of a quality assurance/commissioning process for surface applicators used with HDR electronic brachytherapy sources (Part I) and{sup 192}Ir sources (Part II). Air-kerma rate measurements for the electronic brachytherapy sources were completed with an Attix Free-Air Chamber, as well as several models of small-volume ionization chambers to obtain an air-kerma rate at the treatment surface for each applicator. Correction factors were calculated using MCNP5 and EGSnrc Monte Carlo codes in order to determine an applicator-specific absorbed dose to water at the treatment surface from the measured air-kerma rate. Additionally, relative dose measurements of the surface dose distributions and characteristic depth dose curves were completed in-phantom. Results: Theoretical dose distributions and depth dose curves were generated for each applicator and agreed well with the measured values. A method of output verification was created that allows users to determine the applicator-specific dose to water at the treatment surface based on a measured air-kerma rate. Conclusions: The novel output verification methods described in this work will reduce uncertainties in dose delivery for treatments with these kinds of surface applicators, ultimately improving patient care.

61 RADIATION PROTECTION AND DOSIMETRY↗

Photonics in Multimaterial Lateral Heterostructures Combining Group IV Chalcogenide van der Waals Semiconductors

Abstract Lateral heterostructures combining two multilayer group IV chalcogenide van der Waals semiconductors have attracted interest for optoelectronics, twistronics, and valleytronics, owing to their structural anisotropy, bulk‐like electronic properties, enhanced optical thickness, and vertical interfaces enabling in‐plane charge manipulation/separation, perpendicular to the trajectory of incident light. Group IV monochalcogenides support propagating photonic waveguide modes, but their interference gives rise to complex light emission patterns throughout the visible/near‐infrared range both in uniform flakes and single‐interface lateral heterostructures. Here, this work demonstrates the judicious integration of pure and alloyed monochalcogenide crystals into multimaterial heterostructures with unique photonic properties, notably the ability to select photonic modes with targeted discrete energies through geometric factors rather than band engineering. SnS‐GeS 1− x Se x ‐GeSe‐GeS 1− x Se x heterostructures with a GeS 1− x Se x active layer sandwiched laterally between GeSe and SnS, semiconductors with similar optical constants but smaller bandgaps, were designed and realized via sequential vapor transport synthesis. Raman spectroscopy, electron microscopy/diffraction, and energy‐dispersive X‐ray spectroscopy confirm a high crystal quality of the laterally stitched components with sharp interfaces. Nanometer‐scale cathodoluminescence spectroscopy provides evidence for a facile transfer of electron–hole pairs across the lateral interfaces and demonstrates the selection of photon emission at discrete energies in the laterally embedded active (GeS 1− x Se x ) part of the heterostructure.

2D layered crystals↗

Stakeholder Analysis Report Subtask 3.3 – CarbonSAFE Illinois East Sub-Basin Topical Report 8

Effective stakeholder engagement has been proven to be a critical component in the success of numerous CCS activities and is essential if the technology is to be widely developed in the future. This report contains a stakeholder assessment and highlights some engagement activities conducted during the CarbonSAFE Illinois East Sub-Basin Prefeasibility study. This report is intended to lay the groundwork and provide recommendations for the Wabash CarbonSAFE Feasibility project, currently underway in conjunction with the Wabash Valley Resources ammonia plant retrofit taking place at the former Terre Haute US DOE integrated gasification combined cycle plant. The analysis sets the stage for identifying and understanding the concerns of key stakeholders, describes actions currently underway, highlights perceptions of potential benefits and risks of project activities, and provides recommendations for short- and long-term forms of engagement. This study used social site characterization methods to better understand local and regional stakeholder positions and needs. The stakeholder engagement strategy will emphasize engagement with stakeholders that enable project development and those that are impacted by the project. The stakeholder analysis process can be broken down into the four basic steps of: identifying, analyzing, mapping, and prioritizing. Various stakeholders were identified by literature search, and additionally by a group of approximately twenty Indiana University SPEA master’s students via a stakeholder workshop. The stakeholder analysis and mapping process is used to help prioritize stakeholder engagement strategies; engagement strategies must be developed with particular stakeholder concerns in mind and messages tailored to those stakeholders’ needs. The stakeholder map with engagement strategy developed for this analysis suggests state government, industry, federal government, and state education are predicted to have the highest interest and influence and should be a priority focus in engagement. Local media, local landowners, local government, and utilities are predicted to have high influence but low interest and may also be a high priority group to engage. Environmental and economic impacts of activities that are considered to be important by stakeholders in the present day (key) or activities that have taken place in the past (legacy) can impact stakeholder perspectives and need to be considered when creating a stakeholder engagement strategy. The issue of environmental clean-up was identified in both the social media analysis and also through USEPA Environmental Justice analysis tools. Thus, it is clear this will be an important factor for consideration in any stakeholder engagement conducted in and around Terre Haute. Furthermore, stakeholder engagement education materials will need to emphasize that carbon dioxide is not a hazardous material, as well as address FAQs regarding CCS. In addition, recommendations for consideration when developing the stakeholder engagement strategy for projects in the Illinois East Sub-Basin in general and related to the Wabash CarbonSAFE project specifically include: drawing clear lines of responsibility between Wabash Valley Resources and ISGS-led Wabash CarbonSAFE that allow the projects to manage integration and messaging; the need for ISGS and other partners to maintain objectivity and remain trusted sources of information; monitoring of social media and continuing to engage with key stakeholder groups; and providing support for key stakeholders to become sources of project information and project champions.

01 COAL, LIGNITE, AND PEAT↗

Phosphine Ligand Binding and Catalytic Activity of Group 10–14 Heterobimetallic Complexes

We report heterobimetallic complexes have attracted much interest due to their broad range of structures and reactivities as well as unique catalytic abilities. Additionally, these complexes can be utilized as single-source precursors for the synthesis of binary intermetallic compounds. An example is the family of bis(pyridine-2-thiolato)dichloro-germanium and tin complexes of group 10 metals (Pd and Pt). The reactivity of these heterobimetallic complexes is highly tunable through substitution of the group 14 element and the neutral ligand bound to the transition metal. Here, we study the binding energies of three different phosphorous-based ligands, PR 3 (R = Bu, Ph, and OPh) by density functional theory and restricted Hartree–Fock methods. The PR 3 ligand-binding energies follow the trend of PBu 3 > PPh 3 > P(OPh) 3 , in agreement with their sigma-bonding ability. These results are confirmed by ligand exchange experiments monitored with 31 P NMR spectroscopy, in which a weaker binding PR 3 ligand is replaced with a stronger one. Furthermore, we demonstrate that the heterobimetallic complexes are active catalysts in the Negishi coupling reaction, where stronger binding PR 3 ligands inhibit access to an active site at the metal center. Similar strategies could be applied to other complexes to better understand their ligand-binding energetics and predict their reactivity as both precursors and catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gen IV Education and Training Working Group Webinars’ Initiative

Collaboration and support among national laboratories, industry, universities, and research and development organizations are vital to not only maintain a skilled and competent nuclear workforce but also to avert the risk of human resource shortages. As stated in a recent IAEA paper [1], the world nuclear electrical generating capacity is projected to increase to 554 GW(e) by 2030 and up to 874 GW(e) by 2050 (Fig. 1). This represents a 42% increase over current levels by 2030 and a doubling of the current capacity by 2050. To promote Education and Training (E&T) on Gen IV reactor systems and other nuclear related topics of interest, the Gen IV Education and Training Working Group (ETWG) identifies and advertises training courses; engages collaboration with other international education and training organizations; delivers webinars dedicated to Gen IV systems; and maintains a modern social medium platform to exchange information and ideas on Gen IV R&D topics, as well as on related GIF education and training activities. At the end of June 2020, the GIF ETWG has produced, podcasted and posted forty-one webinars covering the six Gen IV systems and various subjects addressing e.g. the economics of the nuclear fuel cycle, sustainability aspects of Gen IV systems, nuclear fuels and materials challenges, the thorium fuel cycle, energy conversion systems, and lessons learned for knowledge management and preservation. This paper describes the development of these webinars from the initial concept to its full realization, with future webinars planned in 2021, addressing topics such as materials and fuels performance for advanced reactors, small modular reactor.

Paviet, Patricia D.↗

Galaxy groups

Galaxy groups can be characterized by the radius of decoupling from cosmic expansion, the radius of the caustic of second turnaround, and the velocity dispersion of galaxies within this latter radius. These parameters can be a challenge to measure, especially for small groups with few members. In this study, results are gathered pertaining to particularly well-studied groups over four decades in group mass. Scaling relations anticipated from theory are demonstrated and coefficients of the relationships are specified. There is an update of the relationship between light and mass for groups, confirming that groups with mass of a few times 10{sup 12}M{sub ⊙} are the most lit up while groups with more and less mass are darker. It is demonstrated that there is an interesting one-to-one correlation between the number of dwarf satellites in a group and the group mass. There is the suggestion that small variations in the slope of the luminosity function in groups are caused by the degree of depletion of intermediate luminosity systems rather than variations in the number per unit mass of dwarfs. Finally, returning to the characteristic radii of groups, the ratio of first to second turnaround depends on the dark matter and dark energy content of the universe and a crude estimate can be made from the current observations of Ω{sub matter}∼0.15 in a flat topology, with a 68% probability of being less than 0.44.

79 ASTRONOMY AND ASTROPHYSICS↗

Multipole groups and fracton phenomena on arbitrary crystalline lattices

Multipole symmetries are of interest in multiple contexts, from the study of fracton phases, to nonergodic quantum dynamics, to the exploration of new hydrodynamic universality classes. However, prior explorations have focused on continuum systems or hypercubic lattices. In this work, we systematically explore multipole symmetries on arbitrary crystal lattices. We explain how, given a crystal structure (specified by a space group and the occupied Wyckoff positions), one may systematically construct all consistent multipole groups. We focus on two-dimensional crystal structures for simplicity, although our methods are general and extend straightforwardly to three dimensions. We classify the possible multipole groups on all two-dimensional Bravais lattices, and on the Kagome and breathing Kagome crystal structures to illustrate the procedure on general crystal lattices. Using Wyckoff positions, we provide an in-principle classification of all possible multipole groups in any space group. We explain how, given a valid multipole group, one may construct a consistent lattice Hamiltonian and a low-energy field theory. We then explore the physical consequences, beginning by generalizing certain results originally obtained on hypercubic lattices to arbitrary crystal structures. Next, we identify two apparently novel phenomena: an emergent, robust subsystem symmetry on the triangular lattice, and an exact multipolar symmetry on the breathing Kagome lattice that does not include conservation of charge (monopole), but instead conserves a vector charge. This makes clear that there is new physics to be found by exploring the consequences of multipolar symmetries on arbitrary lattices, and this work provides the map for the exploration thereof, as well as guiding the search for emergent multipolar symmetries and the attendant exotic phenomena in real materials based on nonhypercubic lattices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Using a machine learning approach to determine the space group of a structure from the atomic pair distribution function

Here a method is presented for predicting the space group of a structure given a calculated or measured atomic pair distribution function (PDF) from that structure. The method utilizes machine learning models trained on more than 100 000 PDFs calculated from structures in the 45 most heavily represented space groups. In particular, a convolutional neural network (CNN) model is presented which yields a promising result in that it correctly identifies the space group among the top-6 estimates 91.9% of the time. The CNN model also successfully identifies space groups for 12 out of 15 experimental PDFs. Interesting aspects of the failed estimates are discussed, which indicate that the CNN is failing in similar ways as conventional indexing algorithms applied to conventional powder diffraction data. This preliminary success of the CNN model shows the possibility of model-independent assessment of PDF data on a wide class of materials.

99 GENERAL AND MISCELLANEOUS↗

Structural variations and photoluminescent properties of a series of metal-organic frameworks constructed from 5-(4-carboxybenzoylamino)-isophthalic acid

Five new metal-organic frameworks (MOFs) with 5-(4-carboxybenzoylamino)-isophthalic acid (H₃L), namely, [Cd₉L₆(DMA)₆]·4DMA (1), [Cd₃L₂(H₂O)₉]·4H₂O (2), [LaL(H₂O)₄]·2H₂O (3), [CeL(H₂O)₄]·H₂O (4) and [Tb(HL)(H₂L)(H₂O)₃]·5H₂O (5) (DMA=N,N-dimethylacetamide), have been synthesized. Complex 1 shows a three-dimensional architecture generated from linkage of Cd–O chains via L³⁻ ligands. Minor variations in synthetic conditions of 1 afforded 2, which features an interesting 2D→3D catenation architecture containing helical chains. Complexes 3 and 4 are isostructural and each feature a two-dimensional architecture constructed from the linkage of L³⁻ with Ln³⁺. Complex 5 displays a chain-like structure, of which the most interesting feature is the existence of free carboxylic acid (–COOH) group which may confer unique functionality. Moreover, the investigations of the thermal stability, powder X-ray diffractions and solid-state photoluminescent properties for these crystalline materials have been carried out. - Graphical Abstract: Solvothermal reactions of tricarboxylate ligand H₃L with Cd²⁺/Ln³⁺ has yielded a series of new MOFs containing interesting structural motifs. Highlights: • A tricarboxylate ligand whose coordinating functionalities are not symmetry equivalent is employed to construct MOFs. • Complex 2 features an interesting 2D→3D catenation architecture containing helical chains. • Complex 3 feature chain-like structure containing free – COOH group, which may confer unique functionality. • Photoluminescent properties and thermal behaviors for 1–5 have been reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atmospheric pressure plasma functionalization of polystyrene

Atmospheric pressure plasma jets (APPJs) are used to improve the adhesive and hydrophilic properties of commodity hydrocarbon polymers such as polypropylene, polyethylene, and polystyrene (PS). These improvements largely result from adding oxygen functional groups to the surface. PS functionalization is of interest to produce high value biocompatible well-plates and dishes, which require precise control over surface properties. In this paper, we discuss results from a computational investigation of APPJ functionalization of PS surfaces using He/O 2 /H 2 O gas mixtures. A newly developed surface reaction mechanism for functionalization of PS upon exposure to these plasmas is discussed. A global plasma model operated in plug-flow mode was used to predict plasma-produced species fluxes onto the PS surface. A surface site balance model was used to predict oxygen-functionalization of the PS following exposure to the plasma and ambient air. We found that O-occupancy on the surface strongly correlates with the O-atom flux to the PS, with alcohol groups and cross-linked products making the largest contributors to total oxygen fraction. Free radical sites, such as alkoxy and peroxy, are quickly consumed in the post-plasma exposure to air through passivation and cross-linking. O-atom fluences approaching 10 17 cm -2 saturate the O-occupancy on the PS surface, creating functionality that is not particularly sensitive to moderate changes in operating conditions.

36 MATERIALS SCIENCE↗

Generation of Tin-Vacancy Centers in Diamond via Shallow Ion Implantation and Subsequent Diamond Overgrowth

Group IV color centers in diamond have garnered great interest for their potential as optically active solid-state spin qubits. The future utilization of such emitters requires the development of precise site-controlled emitter generation techniques that are compatible with high-quality nanophotonic devices. This task is more challenging for color centers with large group IV impurity atoms, which are otherwise promising because of their predicted long spin coherence times without a dilution refrigerator. For example, when applied to the negatively charged tin-vacancy (SnV – ) center, conventional site-controlled color center generation methods either damage the diamond surface or yield bulk spectra with unexplained features. Here we demonstrate a novel method to generate site-controlled SnV – centers with clean bulk spectra. We shallowly implant Sn ions through a thin implantation mask and subsequently grow a layer of diamond via chemical vapor deposition. This method can be extended to other color centers and integrated with quantum nanophotonic device fabrication.

36 MATERIALS SCIENCE↗

DEVELOPMENT OF INEXPENSIVE HIGH TEMPERATURE NITI-BASED SHAPE MEMORY ALLOYS FOR POWDER BED ADDITIVE MANUFACTURING

NiTi and NiTi-based Shape Memory Alloys (SMA) exhibit a reversible solid-state phase transformation from martensite to austenite driven by thermal energy. High temperature (Mf>100°C) SMAs are martensite at room temperature and can be fabricated into solid-state actuators that return to a pre-programmed shape against a designed load after heating to transformation threshold. Reactive as-fabricated additively manufactured parts (4-D printing) is the current state of the art in manufacturing of SMAs but requires compositions compliant to rapid solidification. Existing actuator designs are developed from commercially available, highly investigated material compositions. However, existing high temperature high performance (high actuation strain, low thermal hysteresis) shape memory alloys contain significant (>10% at.) portions of high-cost Platinum Group Metals (PGMs). It is of significant scientific interest to investigate material compositions that are peer performing or superior to PGMs whose constituent elements represent a significant cost savings. Shape memory alloy properties vary significantly with small (0.1% at.) compositional changes making robust investigative sample sets very large. Computational material design can be deployed to shrink the compositional space of possible alloy combinations and reduce the experimental load in material discovery. Investigating shape memory effect (SME) and validating process additive process parameters for a single novel composition is cost intensive in both time and consumed materials. Additionally, sub-optimal processing, oxygen, or solidification rate sensitivity could render additively manufacturing specimens without micro, macro cracks, or significant chemical variance impossible. Unfortunately, such failure susceptibility cannot be simulated. Therefore, a research pathway to validate novel shape memory alloy compositions for powder bed fusion additive manufacturing without the need for powdered feedstock is also proposed. This research investigates novel high temperature shape memory alloys for actuators without platinum group alloying elements to discover one that could be commercially viable as an additive manufacturing feedstock.

Sundermann, Tayler↗

Phase structure of the interacting vector boson model

The two-fluid interacting vector boson model (IVBM) with U(6) as a dynamical group possesses a rich algebraic structure of physically interesting subgroups that define its distinct exactly solvable dynamical limits. The classical images corresponding to different dynamical symmetries are obtained by means of the coherent state method. The phase structure of the IVBM is investigated and the following basic phase shapes, connected to specific geometric configurations of the ground state, are determined: spherical, U{sub p}(3) x U{sub n}(3), {gamma}-unstable, O(6), and axially deformed, SU(3) x U{sub T}(2). The ground-state quantum phase transitions between different phase shapes, corresponding to the different dynamical symmetries and mixed symmetry case, are investigated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MCNP6 Results for the Phase III Sensitivity Benchmark of the OCED/NEA Expert Group on Uncertainty Analysis for Criticality Safety Assessment

Within the last decade, there has been increasing interest in the calculation of cross section sensitivity coefficients of k eff for integral experiment design and uncertainty analysis. The OECD/NEA has an Expert Group devoted to Sensitivity and Uncertainty Analysis within the Working Party for Nuclear Criticality Safety. This expert group has developed benchmarks to assess code capabilities and performance for doing sensitivity and uncertainty analysis. Phase III of a set of sensitivity benchmarks evaluates capabilities for computing sensitivity coefficients. MCNP6 has the capability to compute cross section sensitivities for k eff using continuous-energy physics. To help verify this capability, results for the Phase III benchmark cases are generated and submitted to the Expert Group for comparison. The Phase III benchmark has three cases: III.1, an array of MOX fuel pins, III.2, a series of infinite lattices of MOX fuel pins with varying pitches, and III.3 two spheres with homogeneous mixtures of UF 4 and polyethylene with different enrichments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Non-invertible Symmetries and their Applications (Final Report)

Symmetries have long been a staple of theoretical physics. Recent developments have led to extensions of the notion of symmetry to so-called generalized symmetries, a particularly interesting class of which are non-invertible symmetries. Whereas traditional symmetries form a group—a mathematical structure capturing the intuition that the composition of two symmetry transformations is another symmetry transformation, and that every symmetry transformation can be undone by an inverse transformation—non-invertible symmetries have the interesting property that they do not form a group. The current award was used to pursue the study of non-invertible symmetries, focusing on both their mathematical framework and physical applications.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Recent developments in atomic/nuclear methodologies used for the study of cultural heritage objects

Archaeometry is an area established in the international community since the 60s, with extensive use of atomic-nuclear methods in the characterization of art, archaeological and cultural heritage objects in general. In Brazil, however, until the early '90s, employing methods of physics, only the area of archaeological dating was implemented. It was only after this period that Brazilian groups became involved in the characterization of archaeological and art objects with these methodologies. The Laboratory of Applied Nuclear Physics, State University of Londrina (LFNA/UEL) introduced, pioneered in 1994, Archaeometry and related issues among its priority lines of research, after a member of LFNA has been involved in 1992 with the possibilities of tomography in archaeometry, as well as the analysis of ancient bronzes by EDXRF. Since then, LFNA has been working with PXRF and Portable Raman in several museums in Brazil, in field studies of cave paintings and in the laboratory with material sent by archaeologists, as well as carrying out collaborative work with new groups that followed in this area. From 2003/2004 LAMFI/DFN/IFUSP and LIN/COPPE/UFRJ began to engage in the area, respectively with methodologies using ion beams and PXRF, then over time incorporating other techniques, followed later by other groups. Due to the growing number of laboratories and institutions/archaeologists/conservators interested in these applications, in may 2012 was created a network of available laboratories, based at http://www.dfn.if.usp.br/lapac. It will be presented a panel of recent developments and applications of these methodologies by national groups, as well as a sampling of what has been done by leading groups abroad.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analytical Radiochemical Method Development for Mark 18A Program

The Savannah River National Laboratory Nuclear Measurements Group was tasked by the Mark 18A Program team with developing three analytical characterization methods. These methods will support process and waste characterization of the Mark 18A program material. While methods already existed for most analytes of interest to the Mark 18A program team, the Nuclear Measurements Group developed and refined methods to quantify the Cf isotopes, 107 Pd, and 121m Sn. The results of that effort are presented in this work. Methods were successfully developed to characterize the Mark 18A samples for the needed isotopes and the NMG is ready to receive Mark 18A program samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Composition dependence of atomic order in strain-relaxed, metastable GeSn alloys

Extended x-ray absorption fine structure (EXAFS) measurements of single-crystal Ge/GeSn radial heterostructure nanowires are used to examine the effects of composition on both short-range order (SRO) and longer-range disorder in GeSn alloys. GeSn has prompted significant interest because it can achieve a direct band gap for sufficient Sn concentrations beyond the equilibrium solid solubility limit in an all-group IV system. Short-range order in this material is particularly interesting as it has been predicted to affect the band gap independent of average composition or strain effects. By independently controlling the Sn composition and GeSn thickness during chemical vapor deposition of misfitting GeSn shells around ultrathin, elastically compliant, Ge core nanowires, the elastic misfit strain in the GeSn is minimized for Sn compositions over the studied range ≈Ge 0.96 Sn 0.04 to Ge 0.88 Sn 0.12 . The degree of SRO was found to decrease with increasing Sn composition. Additionally, damping of the EXAFS signal was observed as the Sn content increased, particularly for increasingly distant atomic shells about the absorbing atom, even for scattering paths not involving Sn atoms. This result is quantified as an increase in the mean-squared relative displacement parameters of the shells. These measurements reveal the accommodation of local strain due to the presence of the highly size-mismatched Sn atoms in the Ge diamond cubic lattice (≈14%), which may have effects on the band structure of the material in addition to the influence of short-range atomic order. Comparison among the nanowire samples allows for calculation of the topological rigidity parameter, a ∗∗ , for the first-neighbor bond lengths. Furthermore, these exhibit chemically distinct values for Ge-Ge, Ge-Sn, and Sn-Sn, and they are consistent with the value a ∗∗ = 0.75 ± 0.07 confirming the general applicability of the model to alloys with both large amounts of natural misfit strain and the potential for short-range order.

Crystal structure Semiconductors Transmission elec↗