SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Holographic methods permit use of very large effective apertures so that weak signals can be collected over wide area and integrated to form image. Technique, modification of side-looking radar principle, can be used at very short ranges needed for nondestructive inspection of test specimens.
A three-dimensional electromagnetic inverse scattering identity, based on the physical optics approximation, is developed for the monostatic scattered far field cross section of perfect conductors. Uniqueness of this inverse identity is proven. This identity requires complete scattering information for all frequencies and aspect angles. A nonsingular integral equation is developed for the arbitrary case of incomplete frequence and/or aspect angle scattering information. A general closed-form solution to this integral equation is developed, which yields the shape of the scatterer from such incomplete information. A specific practical radar solution is presented. The resolution of this solution is developed, yielding short-pulse target resolution radar system parameter equations. The special cases of two- and one-dimensional inverse scattering and the special case of a priori knowledge of scatterer symmetry are treated in some detail. The merits of this solution over the conventional radar imaging technique are discussed.
One of the major objectives of the Mariner Mars 1971 mission was the systematic mapping of Mars. This required a complex and thorough photogrammetric calibration of both the wide-angle and narrow-angle cameras mounted on the spacecraft scan platform. Because of the peculiarities of the TV imaging techniques (transmission quality, low resolution, electronic distortion, etc.), combined with the extremely small vidicon format, many unique difficulties were encountered and many unprecedented problems had to be solved. Their successful solution, based on experience gained during the Surveyor and Mariner Mars 1969 projects, is discussed, and the calibration procedure for the parameters of interior orientation, as well as for opto-mechanical orthogonality, is described in detail.
Remote sensing data obtained from aerial reconnaissance of tornado damage to the city of Pierre, South Dakota on July 23, 1973 was evaluated to determine its value as a decision making and management tool in post-disaster restoration activities. The imaging techniques used are briefly discussed, and both aerial and closeup color photographs are provided which were used in the evaluation. The immediate advantages of the data are identified as a 'quick-look' assessment, and a list is given which outlines the additional advantages for which positive rescue and cleanup action may be initiated. Hail and flood damage evaluation, and remote sensing of crop damage due to insect of disease infestation is also briefly described.
Imaging technique may be used in series with flat or conical Bragg crystals to separate spatial/spectral convolution when spectrometer is scanned across extended source emitting at more than one wavelength. Technique allows line direction and continuum to be detected and provides data for spatial mapping of source.
Clinical applications of a 3-D video imaging technique developed by NASA for observation and control of remote manipulators are discussed. Incorporation of this technique in a stereo fluoroscopic system provides reduced radiation dosage and greater vision and mobility of the user.
Astronomical speckle patterns are examined in an atmospheric-optics context in order to determine what kind of image quality is to be expected from several different imaging techniques. The model used to describe the instantaneous complex field distribution across the pupil of a large telescope regards the pupil as a deep phase grating with a periodicity given by the size of the cell of uniform phase or the refractive index structure function. This model is used along with an empirical formula derived purely from the physical appearance of the speckle patterns to discuss the orders of interference in astronomical speckle patterns.
Measurements of noise produced by a model of a wheel well (rectangular cavity), landing gear (wheel and strut), and flap at Mach numbers of 0.18 and 0.40 have been made in an anechoic flow facility. Individual component noise and component interference noise are described in terms of the OASPL, spectra, and streamwise or flyover directivity patterns. Areas of significant sound generation are illuminated and causes of these noise sources are suggested. Results from an acoustic imaging technique are used to point out other source regions not discernible by simple far-field measurements.
Earlier studies have shown that an earth-orbiting electrically scanned microwave radiometer (ESMR) is capable of inferring the extent, concentration, and age of sea ice; the extent, concentration, and thickness of lake ice; rainfall rates over oceans; surface wind speeds over open water; particle size distribution in the deep snow cover of continental ice sheets; and soil moisture content in unvegetated fields. Most other features of the surface of the earth and its atmosphere require multispectral imaging techniques to unscramble the combined contributions of the atmosphere and the surface. Multispectral extraction of surface parameters is analyzed on the basis of a pertinent equation in terms of the observed brightness temperature, the emissivity of the surface which depends on wavelength and various parameters, the sensible temperature of the surface, and the total atmospheric opacity which is also wavelength dependent. Implementation of the multispectral technique is examined. Properties of the surface of the earth and its atmosphere to be determined from a scanning multichannel microwave radiometer are tabulated.
A network of sampling sites throughout the annual grassland region was established to correlate plant growth in stages and forage production to climatic and other environmental factors. Plant growth and range conditions were further related to geographic location and seasonal variations. A sequence of LANDSAT data was obtained covering critical periods in the growth cycle. Data were analyzed by both photointerpretation and computer aided techniques. Image characteristics and spectral reflectance data were then related to forage production, range condition, range site, and changing growth conditions.
Orbit characteristics of the two Viking Orbiter spacecraft made possible the acquisition of high-resolution imagery of the Martian surface, resulting in many excellent convergent stereopairs. Evaluation of these stereopairs presented a few unconventional problems because the routine relative orientation was not feasible, mainly due to a lack of good passpoints and to the technical peculiarities of TV vidicon imaging techniques. One of the ways to circumvent these problems is to use the orbital and navigational parameters of the spacecraft for an external 'forced' relative orientation. This approach requires a number of rotations and counter-rotations between various coordinate systems, which may make the involved mathematics look rather complicated, but its computational applications become very simple, fast, accurate, and inexpensive.
Using imaging techniques maps were made at 50 and 100 micrometers with one foot resolution of a region around the galactic center about one-half degree in extent. Higher resolution maps were made of the central portion of the galaxy at 30, 50, and 100 micrometers. Resolution maps of a reflection nebula were also made. Infrared sources associated with molecular clouds were investigated.
Various imaging techniques are outlined for use in mapping, land use, and land management in Mexico. Among the techniques discussed are pattern recognition and photographic processing. The utilization of information from remote sensing devices on satellites are studied. Multispectral band scanners are examined and software, hardware, and other program requirements are surveyed.
The following aspects of SAR development are discussed: calibration techniques, image simulation and interpretability, antennas, data processing, and system design. Papers are presented on such topics as a postlaunch calibration experiment for the Seasat-A SAR, computer simulation of an orbital SAR system, definition study of the Shuttle Imaging Radar, custom LSI circuits for spaceborne SAR processors, and random sampling adaptively focusing SAR.
The May 29, 1978, occultation of SAO 85009 by Pallas was observed photoelectrically at seven widely spaced sites. The observations are well represented by an elliptical apparent limb profile having semimajor and semiminor axes of 279.5 + or - 2.9 and 262.7 + or - 4.5 km, respectively. Combining these results with published information on the light curve and rotational pole position, Pallas's mean diameter is found to be 538 + or - 12 km, which yields a mean density for Pallas of 2.8 + or - 0.5 g/cu cm and a visual geometric albedo of 0.103 + or - 0.005. The diameter of Pallas as determined from this occultation is significantly smaller than the values derived by radiometric, polarimetric, and double-image techniques.
The imaging techniques relevant in the determination of the clinical potential of the Lixiscope are reviewed.
The application of magnetographs and X-ray imaging techniques to determine the magnitude, structure, origin, and evolution of the solar coronal magnetic field is examined. The spatial and temporal resolution of the X-ray telescope is discussed and a comparison of ground based magnetogram sequences versus a magnetograph in space is presented. Skylab photographs of the evolution of transient coronal holes are provided.
A headway sensing system for an automated mixed traffic vehicle (AMTV) employing an array of optical proximity sensor elements is described, and its performance is presented in terms of object detection profiles. The problem of sensing in turns is explored experimentally and requirements for future turn sensors are discussed. A recommended headway sensor configuration, employing multiple source elements in the focal plane of one lens operating together with a similar detector unit, is described. Alternative concepts including laser radar, ultrasonic sensing, imaging techniques, and radar are compared to the present proximity sensor approach. Design concepts for an AMTV body which will minimize the probability of injury to pedestrians or passengers in the event of a collision are presented.