Search NASA⌕ Search

SEARCH · Search NASA

Results for “Impact Melt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

The source and origin of the exotic component and KREEP-rich materials on the moon

The enrichments of trace-element concentrations in lunar soils are attributed to the combined effects of comminution of local rocks and a preferential addition of the exotic component to finer grain sizes. The exotic component appears similar to Fra Mauro materials, and there is a strong correlation between the percentage of exotic component and distance from the Fra Mauro site. Based on trace-element characteristics, it is suggested that the exotic component is finely comminuted KREEP and is dispersed on the lunar surface from the Fra Mauro and other high gamma-ray active regions in the Imbrium-Procellarum regions. The major and trace-element chemistry of these materials is considered to be due to impact melting of trace-element-rich accessory phases followed by variable dilution with partial melts of the bulk solid phases of plagioclase, low-Ca pyroxene, and olivine. The generation of KREEP and the exotic component is an impact-produced local process and need not imply a global occurrence of radioactive crust on the moon.

Murthy, V. R.↗

Rochechouart meteorite crater - Identification of projectile

Ten samples from the 20-km Rochechouart crater in France have been analyzed for the siderophile elements Ir, Os, Re, Au, Pd, Ni, and Ge by radiochemical neutron activation analysis. The up to 1000-fold enrichment of siderophiles correlates with shock effects, increasing in the following order from least to greatest: basement rocks, glass-free breccias, glassy breccias, impact melts. The abundance pattern of the meteorite was determined from interelement correlations. Several samples fell off the correlation lines, presumably due to recrystallization and weathering of impact glasses during the approximately 165-m.y. age of the crater. The most reliable diagnostic elements were Os, Ir, Ni, and Pd; their abundance ratios suggest that the Rochechouart meteorite was a IIA iron.

Janssens, M.-J.↗

Zircon (U-TH)/He Impact Crater Thermochronometry and the Effects of Shock Microstructures on Helium Diffusion Kinetics

Accurate age determinations of hyper-velocity impact and cratering events remains difficult and often controversial, while less than half of all known impact craters are regarded as accurately and precisely dated. Besides 40Ar/39Ar and U-Pb methods, zircon (U-Th)/He dating of impactites is a burgeoning technique to date large- to medium-sized impact structures. Zircon (U-Th)/He ages can be fully reset in minutes at 1000°C, T commonly reached in and directly adjacent to impact melt domains, whereas complete resetting of zircon (U-Th)/He at <300°C, which might be encountered near the crater margins or persist in post-impact hydrothermal systems, may take >103-4 years. However, there is a critical need to test the reliability of (U-Th)/He impact dating in shock deformed zircon, and to quantify helium diffusion kinetics in well-characterized grains with a broad spectrum of shock-induced defect substructures. For this purpose, we investigated samples from two impact structures, the 66 Ma Chicxulub multi-ring basin and the 15 Ma Ries complex crater, to compare zircon diffusion kinetics from impact structures with varying parameters, including size, age, and hydrothermal system longevity. Shock microstructures were characterized by backscattered-electron (BSE) imaging prior to determination of diffusion step-heating fractional release experiments using light-bulb furnace with prograde and retrograde incrementally 10°C steps from 300°C to 600°C. We find that zircon with low-level shock microstructures exhibit no significant deviation from helium diffusion kinetics of undamaged zircon. In contrast, zircon grains with planar deformation features and granular textures classified by SEM are characterized by a dramatic decrease in helium retentivity, similar to radiation damage, due to the reduction in the effective domain size and the introduction of fast diffusion pathways. This likely renders shocked grains more susceptible to impact-induced hydrothermal resetting. Hence, characterization of impact microstructure is critical for determining accurate impact ages, but also offers the opportunity to determine the magnitude and duration of post-impact hydrothermal circulation.

Catherine Ross↗

Experimental melting relations of 63545, 76015, and 76055

The experiments discussed were conducted for the purpose of placing additional constraints on the origin of lunar highlands noritic compositions. The sample 63545 represents a fine-grained, crystalline melt rock consisting of pink spinel, plagioclase, divine, interstitial glass, minor oxides, and metal. According to Chao (1973), 76055 is an olivine-bearing micronorite hornfels with abundant xenocrysts and xenoliths. The sample 76015 is a vesicular, poikilitic impact melt with a homogeneous matrix. The obtained experimental melting relations of 63545, 76055, and 76015, are examined, taking into account experimental petrology and trace element chemistry of mare basalts. It is concluded that the studied compositions do not represent magmas derived by partial melting of either cosmic or differentiated source regions at any pressure in the moon. Presently available information would seem to favor an origin by impact-fusion of several highlands components.

Delano, J. W.↗

Microbial Preservation in Sulfates in the Haughton Impact Structure Suggests Target in Search for Life on Mars

Microbes in Haughton Crater Sulfates: Impact craters are of high interest in planetary exploration because they are viewed as possible sites for evidence of life [1]. Hydrothermal systems in craters are particularly regarded as sites where primitive life could evolve. Evidence from the Miocene Haughton impact structure shows that crater hydrothermal deposits may also be a preferred site for subsequent colonization and hence possible extant life: Hydrothermal sulfates at Haughton are colonized by viable cyanobacteria [2]. The Haughton impact structure, Devon Island, Canadian High Arctic, is a 24 km-diameter crater of mid-Tertiary age. The structure preserves an exceptional record of impact-induced hydrothermal activity, including sulfide, and sulfate mineralization [3]. The target rocks excavated at the site included massive gypsum-bearing carbonate rocks of Ordovician age. Impact-remobilized sulfates occur as metre-scale masses of intergrown crystals of the clear form of gypsum selenite in veins and cavity fillings within the crater s impact melt breccia deposits [4]. The selenite is part of the hydrothermal assemblage as it was precipitated by cooling hot waters that were circulating as a result of the impact. Remobilization of the sulfate continues to the present day, such that it occurs in soil crusts (Fig. 1) including sandy beds with a gypsum cement. The sulfate-cemented beds make an interesting comparison with the sulfate-bearing sandy beds encountered by the Opportunity MER [5]. The selenite crystals are up to 0.3 m in width, of high purity, and transparent. They locally exhibit frayed margins where cleavage surfaces have separated. This exfoliation may be a response to freeze-thaw weathering. The selenite contains traces of rock detritus, newly precipitated gypsum, and microbial colonies. The rock detritus consists of sediment particles which penetrated the opened cleavages by up to 2cm from the crystal margins. Some of the detritus is cemented into place by gypsum, which must have been dissolved and reprecipitated from the host selenite.

Parnell, J.↗

The Sudbury Structure as a terrestrial mare basin

A review is presented of the origin, development, and current status of the hypothesis that the Sudbury Structure of Ontario, Canada, is a deformed Precambrian impact crater analogous to the circular lunar maria. Impact and isotopic modeling studies have shown that the Sudbury igneous complex may be largely impact melt rather than internally generated magma. The analogy between lunar maria and the Sudbury Structure, though petrologically wrong, is valid to the extent that both classes of structure were initially formed by impact.

Lowman, Paul D., Jr.↗

Venusian impact basins and cratered terrains

The consensus regarding interpretation of Magellan radar imagery assigns Venus a young volcanic surface subjected in many areas to moderate crustal shortening. I infer that, on the contrary, ancient densely cratered terrain and large impact basins may be preserved over more than half the planet and that crustal shortening has been much overestimated. I see wind erosion and deposition as far more effective in modifying old structures. Integration with lunar chronology suggests that most of the surface of Venus may be older than 3.0 Ga and much may be older than 3.8 Ga. Broad volcanos, hug volcanic domes, plains preserving lobate flow patterns, and numerous lesser volcanic features, pocked sparsely by impact craters, are indeed obvious on Magellan imagery. Some of these postvolcanic impact craters have been slightly extended, but only a small portion has been flooded by still younger lavas. Relative ages of the young craters are indicated by the varying eolian removal of their forms and ejecta blankets and flow lobes, and the oldest are much subdued. If these young impact craters, maximum diameter 275 km, include all preserved impact structures, then their quantity and distribution indicate that Venus was largely resurfaced by volcanism approx. 0.5 Ga, subsequent eruptions having been at a much reduced rate. Away from the approx. 0.5 Ga volcanic features, much of Venus is, however, dominated by circular and subcircular features, 50-2000 km in diameter, many of them multiring, that may be mostly older impact and impact-melt structures substantially modified by wind action. Eolian erosion scoured to bedrock old ridges and uplands, including those that may be cratered terrains and the rims and outer-ring depressions of large impact basins, and removed all surficial deposits to the limits of resolution of the imagery. The complementary eolian deposits form not only dunes, wind streaks, and small plains, but also broad radar-dark plains, commonly assumed to be volcanic although lacking flow morphology, whose materials appear to be thick because they are smoothly compacted into buried craters.

Hamilton, Warren B.↗

Mercurian volcanism questioned

It is noted that reports of the Mariner 10 television team favor a volcanic origin for the plains materials on Mercury. The present paper advances the argument that the Mercurian plains more closely resemble the lunar light plains (which are not of volcanic origin) in terms of stratigraphic relations, surface morphology, and albedo contrast. It is suggested that the plains on Mercury may have been formed from impact materials, possibly impact melts or other basin ejecta which behaved more like a fluid than did the lunar ejecta. It is concluded that if the old intercrater plains and younger smooth plains of Mercury were formed from impact materials, then Mercury underwent neither the volcanic interlude between early cratering episodes nor the late mare-type volcanic phase deduced by the Mariner 10 investigators.

Wilhelms, D. E.↗

Evolutionary history of the mesosiderite asteroid - A chronologic and petrologic synthesis

The evolutionary history of the mesosiderite parent body is composed of six principal epochs. (1) Accretion occurred about 4.56 Ga ago, and (2) initial melting occurred less than about 26 Ma after accretion. (3) Significant crustal remelting occurred more than 4.47 Ga ago, possibly during metal-silicate mixing caused by the accretion of a large metallic Fe-Ni core fragment with some overlying mantle to the MPB regolith. (4) Localized impact melting 4.5-3.9 Ga ago produced quench-textured clasts and caused mesosiderite metamorphism and the extensive melting of type-4 mesosiderites. (5) Collisional disruption and gravitational reassembly occurred about 3.9 Ga ago, causing extensive degassing of Ar and resetting the metallographic cooling rates to about 1 C/Ma. (6) Impact excavitation and ejection of deeply buried breccias occurred much less than 3.9 Ga.

Rubin, Alan E.↗

Shock Heating and Subsequent Cooling of Basaltic Shergottites: The Cases for QUE94201 and Dhofar 378

Shock metamorphism is one of the most fundamental processes in the history of Martian meteorites. Especially, shergottites experienced strong shock effects (>30 GPa) most likely when they were ejected from Mars. "Maskelynitization" of plagioclase and formation of shock melts are major effects due to this severe shock. QUE94201 (QUE) and Dhofar 378 (DHO) are basaltic shergottites that are mainly composed of pyroxene and plagioclase glass. These two shergottites suffered severe shock, which generated abundant impact melt and vesiculated flow textures. In spite of similar degrees of shock between two meteorites, they are distinct in several mineralogical aspects. In this abstract, we discuss their differences to understand differences in their shock heating and subsequent cooling histories.

Mikouchi, T.↗

Ar-Ar Analysis of Chelyabinsk: Evidence for a Recent Impact

The Chelyabinsk meteorite is an LL5 ordinary chondrite that fell as a spectacular fireball on February 15th, 2013, over the Ural region in Russia. The meteoroid exploded at an altitude of 25-30 km, producing shockwaves that broke windowpanes in Chelyabinsk and surrounding areas, injuring some 1500 people. Analyses of the samples show that the meteorite underwent moderate shock metamorphism (stage S4; 25-35 GPa) [1]. Most of the samples have a fusion crust ranging from ~0.1-1mm thick, and roughly a third of the samples were composed of a dark fine-grained impact melt with chondrule fragments which were targeted for chronometry. A Pb-Pb age obtained by [2] of a shock-darkened and potentially melted sample of Chelyabinsk is reported as 4538.3 +/- 2.1 Ma, while a U-Pb study [3] gave an upper concordia intercept of 4454 +/- 67 Ma and a lower intercept of 585 +/- 390. Galimov et al. 2013 [1] suggest the Sm-Nd system records a recent impact event [~290 Ma] that may represent separation from the parent body, while the Rb-Sr isotopic system is disturbed and does not give any definitive isochron. In order to better understand its history, we have performed 40Ar-39Ar analysis on multiple splits of two Chelyabinsk samples; clast- rich MB020f,2 and melt-rich MB020f,5. The term "clast-rich" lithology is meant to indicate a mechanical mixture of highly shock-darkened and less shocked components, both with some shock melt veining.

Beard, S. P.↗

Martian soil component in impact glasses in a Martian meteorite

Chemical compositions of impact melt glass veins, called Lithology C (Lith C) in Martian meteorite EET79001 were determined by electron microprobe analysis. A large enrichment of S, and significant enrichments of Al, Ca, and Na were observed in Lith C glass compared to Lithology A (Lith A). The S enrichment is due to mixing of plagioclase- enriched Lith A material with Martian soil, either prior to or during impact on Mars. A mixture of 87% Lith A, 7% plagioclase, and 6% Martian soil reproduces the average elemental abundances observed in Lith C. Shock melting of such a mixture of plagioclase-enriched, fine-grained Lith A host rock and Martian soil could yield large excesses of S (observed in this study) and Martian atmospheric noble gases (found by Bogard et al., 1983) in Lith C. These mixing proportions can be used to constrain the elemental abundance of phosphorus in Martian soil.

NASA Center JSC↗

The intercrater plains of Mercury and the Moon: Their nature, origin and role in terrestrial planet evolution. Constuction of the paleogeologic maps

The Post Caoris surface was derived from the geologic map by plotting all Class 1 and 2 features. To construct the Caloris surface, Class 3 craters were plotted onto the map, as well as all Class 3 plains. However, if P3 plains were adjacent to P2 units, and appeared continuous with other exposures of P3 material, the P2 unit was assumed to overlie the C3 and P3 material. The younger superposed craters were ignored with respect to the Class 3 surface. The boundaries of P3 materials were then continued under the superposed units, using a minimum of reasonable assumptions. For instance, if P2 and P4 plains were adjacent units, no P3 plains were presumed to lie under the P2 material. Similarly, all C3 craters were considered to have some deposits of impact melt after formation, even if they are mapped containing younger units. C3 craters which were superposed with younger units, C1 or C2 craters, and perhaps P2 plains, were redrawn as if later materials had not been emplaced, i.e., in their post impact, pre-degradation states.

Leake, M. A.↗

FTIR Analysis of Water in Pyroxene and Plagioclase in ALH 84001 and Nakhlites

Determining the volatile budget of the interior of Mars is crucial for our understanding of that planet's formation, geodynamics, cooling history and the origin of its volcanism and atmosphere as well as its potential for life. Surficial water is evident from spacecraft and rover data in polar caps and the atmosphere, in the presence of river channels, and in the detection of water-bearing minerals. Meteorites, however, are our best candidates for estimating the amount of water present at depth, even if all are crustal samples. The last 10 years have seen a blooming of studies measuring water and halogens in Martian meteorites. The bulk of these studies target phosphate, a typically late-stage phase in the igneous Martian meteorites that potentially would concentrate incompatible element hydrogen (H quantified traditionally as "water", i.e., H2O concentrations in weight) near the end of the crystallization sequence. However, determining the amount of water, F, and Cl in the magma from which a phosphate crystallized from is not straightforward and in most instances not possible. On the other hand, phosphates have turned out to be very useful in identifying hydrothermal processes that could have added water while or after the magma flowed and crystallized. Another caveat of analyzing Martian meteorite phases for water is that shocked phases such as maskelynite and impact melts appear to have incorporated water from the Martian atmosphere, as evidenced by high H isotope ((delta)D) signatures, and therefore their water concentrations cannot be interpreted in terms of deep planetary processes. The best candidates for estimating the water content of the Martian interior have been melt inclusions (glass or amphibole-bearing) which the enclosing mineral (usually olivine) would have prevented from exchanging volatiles with the surroundings after crystallization. Even some of these, however, have high (delta)D, meaning they were affected by H exchange via impact events or with crustal reservoirs or hydrothermal fluids. Here, nominally anhydrous minerals (pyroxene, olivine, plagioclase, or maskelynite) in orthopyroxenite ALH 84001 and selected nakhlites are analyzed for water and major elements, in order to determine 1) whether they contain any water; 2) if they do, what controls its distribution (crystallization, degassing, hydrothermal or impact processes); and 3) if any of these measurements can be used to infer the water contents of the parent magma and their mantle sources. A shock-reverberation experiment was also performed on terrestrial orthopyroxenes (opx) to simulate the heavily shocked conditions of ALH 84001 (> 31 GPa [17]).

Peslier, A. H.↗

The Meteoritic Component in Impact Deposits

This proposal requested support for a broad-based research program designed to understand the chemical and mineralogical record of accretion of extraterrestrial matter to the Earth. The primary goal of this research is to study the accretion history of the Earth, to understand how this accretion history reflects the long-term flux of comets, asteroids, and dust in the inner solar system and how this flux is related to the geological and biological history of the Earth. This goal is approached by seeking out the most significant projects that can be attacked utilizing the expertise of the PI and potential collaborators. The greatest expertise of the PI is the analysis of meteoritic components in terrestrial sediments. This proposal identifies three primary areas of research, involving impact events in the early Archean (3.2 Ga), the late Eocene (35 Ma) and the late Pliocene (2 Ma). In the early Archean we investigate sediments that contain the oldest recorded impacts on Earth. These are thick spherule beds, three of which were deposited within 20 m.y. If these are impact deposits the flux of objects to Earth at this time was much greater than predicted by current models. Earlier work used Cr isotopes to prove that one of these contain extraterrestrial matter, from a projectile with Cr isotopes similar to CV chondrites. We planned to expand this work to other spherule beds and to search for additional evidence of other impact events. With samples from D. Lowe (Stanford Univ.) the PI proposed to screen samples for high Ir and Cr so that appropriate samples can be provided to A. Shukolyukov for Cr-isotopic analyses. This work was expected to provide evidence that at least one interval in the early Archean was a period of intense bombardment and to characterize the composition of objects accreted. The late Eocene is also a period of intense bombardment with multiple spherule deposits and two large craters. Farley et al. (1998) demonstrated an increased (3)He flux to marine sediments that was attributed to an increase in interplanetary dust due to a shower of comets invading the inner solar system. We planned to detect a change in the Cr-isotopic composition in the flux of fine-grained extraterrestrial matter to ocean sediments. This would provide evidence for the comet shower hypothesis. We planned attempt to locate late Eocene impact deposits in a new high resolution, hi-latitude site that had the potential for excellent preservation and new information of the sources and effects of these impacts. Although most impacts on Earth occur in deep-ocean basins, only one such event is known - the late Pliocene impact of the Eltanin asteroid. The ejecta from this impact includes Ir- rich impact melt, spherules, and actual meteorites from the km-sized mesosiderite asteroid. Through a study of the ejecta, we can learn about the formation, distribution, alteration and preservation of Ir-rich deposits. We can also learn about meteorite survival during hypervelocity impacts and we can study pieces of a km-sized object to learn more about the mesosiderite parent body. Analyses of sediment cores and geophysical exploration of the impact site can further our understanding of the processes involved in deep-ocean impacts and potential effects on the terrestrial climate and biosphere. We planned analyses of this ejecta, a search for ejecta 5000 km distant from the impact area, and a new oceanographic expedition to study and sample the impact site. In addition to these three specific areas of research, the PI planned to remain flexible and available to exploit new opportunities presented by new discoveries, and to engage in new collaborations if other researchers require his expertise to develop new projects that fit within the objectives of the overall research program.

Kyte, Frank T.↗

Constraints on the Nature and Distribution of Iridium Host Phases at the Cretaceous-Tertiary Boundary: Implications for Projectile Identity and dispersal on impact

Among Cretaceous-Tertiary boundary sites worldwide, variations in the concentrations and ratios of elements commonly enriched in meteorites complicate traditional geochemical attempts at impactor identification. Yet they may provide constraints on the physical and chemical processes associated with large-body disruption and dispersal, as well as with diagenesis of projectile components. To this end, we continue our efforts to identify the mineral host-phases of projectile-derived elements, particularly for Ir, and to document their partitioning between crater deposits and ejecta resulting from the Chicxulub basin-forming impact. Building on earlier work, we used INAA to measure Ir concentrations in successively smaller splits of finely powdered impact melt breccia from the Chicxulub Crater in Mexico (sample Y6Nl9-R(b)), and K/T boundary fish clay from Stevns Klint, Denmark (sample FC-1, split from 40 kg of homogenized material intended as an analytical standard). Results for the Chicxulub sample show a heterogeneous Ir distribution and document that at least five discrete Ir-bearing host phases were isolated in subsequent splits, having Ir masses equivalent to pure Ir spheres from about 0.8 to about 3.5 mm in diameter. Three of these are within a sufficiently reduced mass of powder to warrant searching for them using backscattered electron microscopy. In contrast, successively smaller splits of the Stevns Klint fish clay show no statistically significant deviation from the reported value of 32 +/- 2 ng/g Ir, suggesting a uniform Ir host-phase distribution. For the smallest split obtained thus far (100 +/- 40 ng/g Ir), a pure Ir sphere of equivalent Ir mass would be <0.05 min in diameter. (n.b. Although homogenizing and sieving of FC-1 to <75 min obviously obscured variations in stratigraphic distribution, it is unlikely to have affected the size-frequency distribution of Ir host phases.) We previously identified micrometer-scale Ir host phases by electron microscopy in melt-rock samples from two widely separated drill holes at the Chicxulub Basin, including a replicate split of Y6-NI9-R. One is an aggregate of subhedral Ir metal grains enclosed in silicate, in which no other Pt group elements (PGE) were detected. A second particle with twice the mass as the first, concentrated predominantly in a single grain, is associated with minor concentrations of Os, Ru, and Pt, and with adhering particles of corundum and perovskite. A third Ir-rich particle, with a greater apparent Os concentration, was identified before being lost as a result of charging under the electron beam. In addition to demonstrating the preservation of projectile components within the Chicxulub Crater, analogous phase associations in Ca- and Al-rich inclusions (CAI) from C2 and C3 chondrites suggest to us that these melt-rock Ir host phases are relics from a carbonaceous chondrite K/T boundary impactor Although the obviously low Ru/Ir ratios of the Chicxulub Ir host phases are qualitatively consistent with suggested PGE fractionation with distance during condensation in an ejecta cloud, it seems difficult to explain the accumulation of the about 3 x 10(exp 11) Ir atoms required to form a about 10(exp -10) g nugget of pure Ir metal within a jet of vaporized projectile expanding at 1-4 km/s, or to effectively exclude or remove commonly alloyed PGE and siderophile elements by fractionation processes resulting from condensation, oxidation, sulfidization, exsolution, or autometamorphism during cooling of the melt. We do not dismiss the importance of these processes entirely; on the contrary, other geochemical and mineralogical aspects of the melt rocks require them, and condensation from the expanding ejecta cloud appears to best explain the primary Ir host-phase distribution in the fish clay, as well as the high Ir concentrations associated with spinel-bearing spheroids at the K/T boundary in the Pacific Ocean . If the "relict" hypothesis is correct, micronuggets of other PGEs and alloys, not detected by our INAA screening, should also occur in the melt rocks. Possibly, the discrete host phases with lesser Ir masses are such alloys with subordinate Ir, rather than simply smaller, predominantly Ir-bearing particles. A CAI source for the relics would be consistent with either a comet or an asteroid K/T impact at Chicxulub. (Additional information contained in the original.)

Schuraytz, B. C.↗

Cratering in glasses impacted by debris or micrometeorites

Mechanical strength measurements on five glasses and one glass-ceramic exposed on LDEF revealed no damage exceeding experimental limits of error. The measurement technique subjected less than 5 percent of the sample surface area to stresses above 90 percent of the failure strength. Seven micrometeorite or space debris impacts occurred at locations which were not in that portion of the sample subjected to greater than 90 percent of the applied stress. As a result of this, the impact events on the sample were not detected in the mechanical strength measurements. The physical form and structure of the impact sites was carefully examined to determine the influence of those events upon stress concentration associated with the impact and the resulting mechanical strength. The size of the impact site, insofar as it determines flaw size for fracture purposes, was examined. Surface topography of the impacts reveals that six of the seven sites display impact melting. The classical melt crater structure is surrounded by a zone of fractured glass. Residual stresses arising from shock compression and from cooling of the fused zone cannot be included in the fracture mechanics analyses based on simple flaw size measurements. Strategies for refining estimates of mechanical strength degradation by impact events are presented.

Wiedlocher, David E.↗

Volatile components and continental material of planets

It is shown that the continental material of the terrestrial planets varies in composition from planet to planet according to the abundances and composition of true volatiles (H20, CO2, etc.) in the outer shells of the planets. The formation of these shells occurs very early in a planet's evolution when the role of endogenous processes is indistinct and continental materials are subject to melting and vaporizing in the absence of an atmosphere. As a result, the chemical properties of continental materials are related not only to fractionation processes but also to meltability and volatility. For planets retaining a certain quantity of true volatile components, the chemical transformation of continental material is characterized by a close interaction between impact melting vaporization and endogeneous geological processes.

Florenskiy, K. P.↗