Search NASA⌕ Search

SEARCH · Search NASA

Results for “India”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Magnetocaloric effect in Mn-rich Heusler-derived alloys for room temperature-based applications

Magnetic refrigeration-based technologies rely on the magnetocaloric properties of materials and are crucial for improving energy efficiency and for supporting clean environments. However, materials possessing significant magnetocaloric properties that can be used for room temperature-based applications are still lacking. Heusler alloys (such as Mn–Ni–Ga) show giant magnetocaloric effects, which can be further improved by tuning their composition. Herein, we optimized the ratio of Ni to Ga to achieve an alloy with unique magnetocaloric properties. Here, the alloy demonstrated a substantial magnetocaloric effect, attributed to its narrow temperature range for structural and magnetic phase transitions (near room temperature with minimal hysteresis). Structural phase changes were also observed through high-resolution transmission electron microscopy. Optimum entropy changes, calculated from isothermal magnetization curves (4 Tesla magnetic field), were found to be 24.50 J kg −1 K −1 , which is higher than that of state-of-the-art alloys. Experimental demonstration of the magnetocaloric effect (refrigeration cycle) was also carried out using a thermal imaging camera. Furthermore, first-principles calculations were conducted to validate the experimental findings, specifically focusing on the compositional effects on the structural transitions and magnetic properties of the investigated MNG alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Illuminated nights accelerate the migration‐linked phenology in a passerine finch redheaded bunting

Abstract The excessive use of artificial light is altering the natural light–dark cycles, consequently impacting animal behavior and physiology. Dim light at night (dLAN) can disrupt migratory patterns, alter hormone levels, and impact breeding success in birds. The present research aims to address the effects of dLAN on the metabolic and reproductive tissues of migratory redheaded bunting ( Emberiza bruniceps ). For this, buntings under short winter‐like days (10L:14D) were exposed to either dark nights ( D = 0.00014 W/m 2 ) or dLAN ( D = 0.058 W/m 2 ), and their locomotor activity, body mass, fat score, food intake, testicular volume, and plasma testosterone levels were measured. The histological architecture of the muscle, intestine, testis, and liver tissues was assessed. Birds exposed to dark nights confined their activity to the daytime only, whereas the dLAN group showed nocturnal activity and initiated Zugunruhe (nighttime restlessness). The body mass, food intake, fat score, and testicular volume significantly increased under dLAN. Histomorphometry revealed increased muscle width, epithelium thickness, and lumen diameter in the testis, proximal and distal muscularis thickness in the intestine, hepatic lipid droplet size, and decreased proximal villi length and intestinal diameter under dLAN. Further, plasma testosterone levels also increased under dLAN. Our results suggest that dLAN can induce migration‐linked phenotypes even under non‐stimulatory short days leading to mistimed seasonal activities.

Tiwari, Jyoti [Department of Zoology University of↗
DOE OSTI2025

Unconventional Anomalous Hall Effect in Hexagonal Polar Magnet Y 3 Co 8 Sn 4

A rare realization of unconventional anomalous Hall effect (UAHE) both below and above the magnetic transition temperature (T C ) in a hexagonal noncentrosymmetric magnet Y 3 Co 8 Sn 4 , using a combined experimental and ab initio calculations. Occurrence of such UAHE is mainly attributed to the reciprocal ($\mathscr{KS}$) topology (i.e., the presence of topological Weyl points at/near the Fermi level), along with some contribution from the topological magnetic texture (at low temperatures), as inferred from the measured field-dependent ac susceptibility. The effect of UAHE on the measured transport behavior however evolves differently with temperature above and below T C = 53 K, suggesting different physical mechanism responsible in the two phases. A unique planar ferrimagnetic ordering is found to be the most stable state with ab-plane as the easy plane below T C . The simulated net magnetization and the moment per Co atom agrees fairly well with the experimentally measured values. A reasonably large anomalous Hall conductivity (AHC) is also observed in both the phases (above and below T C ) of the present compound, which is again not so ubiquitous. In conclusion, the results underscore the family of R 3 Co 8 Sn 4 (R = rare earth) polar magnets as a compelling backdrop for exploring the synergy of magnetism and topological non-trivial electronic states, pivotal for spintronic applications.

Density functional theory calculations↗
DOE OSTI2025

Development of carbon nanosensor for vinpocetine at zinc oxide modified carbon matrix with anionic surfactant for clinical application

A nano-level sensing method was formulated for the trace-level detection and determination of vinpocetine (VIN) at a zinc oxide nanomaterial-based carbon matrix with immobilised anionic surfactant sodium dodecyl sulfate (ZnO-SDS/CPE) using cyclic voltammetry (CV) and square wave voltammetry (SWV) approaches. The catalytic properties of ZnO impact the electron rate of VIN activity, resulting in a threefold increase in the VIN peak response with the ZnO-SDS-modified sensor. Here, the effects of several factors, including scan rate, pH, accumulation length, modifier amount, and concentration, were investigated on the VIN peak current. The electro-oxidation of VIN by pH study involves one proton and one electron. The CV method also investigated the effect of scan rate. The charge transfer coefficient (α) is obtained to be 0.58, and the heterogeneous rate constant (k°) is estimated to be 4.46 s⁻¹. The concentration effect of VIN was studied using the SWV method. Specifically, the SWV methodology achieved the lowest detection limit compared to previously published approaches, with estimated values of the Limit of Detection (LOD) and Limit of Quantification (LOQ) being 2.2 × 10⁻⁸ M and 7.7 × 10⁻⁸ M, respectively. The trace level of VIN in tablet and urine samples was determined using the modified sensor. Moreover, the sensor demonstrates particular reproducibility and long-term stability, making it suitable for real-time applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Advances in relaxation and memory effects of magnetic nanoparticles for biomedical applications

Functionalized magnetic nanoparticles are pivotal in magnetic resonance imaging, computed tomography, controlled drug delivery, and hyperthermia treatments due to their exceptional magnetic relaxation and functional properties. The magnetic core composition and structure significantly affects the complex magnetic properties of these nanoparticles necessitating a thorough examination of magnetism fundamentals related to these systems. One important aspect is the ability of magnetic nanoparticles to retain previous magnetic state configurations known as memory effect, primarily governed by domain structure and magnetic anisotropy. Despite its relevance to advanced applications, comprehensive studies on magnetic relaxation and memory effects remain limited. Here, the present review aims to bridge this gap by investigating relaxation mechanisms, synthesis strategies, and applications, fostering further innovation. It investigates the memory effects and their dependence on particle composition and morphology along with key synthesis techniques for large-scale production in industrial adoption. Structured into focused sections on magnetic properties and their influence on biomedical and technological applications, this review provides essential insights into memory effects, magneto-relaxation mechanisms, influencing factors, and both experimental and theoretical methodologies. It also delves into computational modelling and AI-driven design, which are revolutionizing the prediction, discovery, and optimization of materials with tailored properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Peculiar Magnetic and Magneto-Transport Properties in a Noncentrosymmetric Self-Intercalated van der Waals Ferromagnet Cr 5 Te 8

Trigonal Cr 5 Te 8 , a self-intercalated van der Waals ferromagnet with an out-of-plane magnetic anisotropy, has long been known to crystallize in a centrosymmetric structure. However, optical second harmonic generation experiments, together with comprehensive structural analysis, indicate that this compound rather adopts a noncentrosymmetric structure. Lorentz transmission electron microscopy reveals the presence of Néel-type skyrmions, consistent with its noncentrosymmetric structure. A large anomalous Hall conductivity of 102 Ω –1 cm –1 at low temperature stems from intrinsic origin, which is larger than any previously reported values in the bulk Cr–Te system. Notably, spontaneous topological Hall resistivity arising from the skyrmionic phase has been observed. Here, our findings not only elucidate the unique magnetic and magneto-transport properties of noncentrosymmetric trigonal Cr 5 Te 8 , but also open new avenues for investigating the effects of broken inversion symmetry on material properties and their potential applications.

crystal structure↗
DOE OSTI2026

Tea ( Camellia sinensis ) Extract-Mediated Green Synthesis of Co 3 O 4 and Co 3 O 4 @Graphene Nanocomposites for Multifunctional Applications in Pollutant Degradation, Sensing, and Energy Storage

A novel solution-mixing method was proposed to synthesize Co 3 O 4 /graphene nanocomposites (Co 3 O 4 @Gr) using a green tea leaf (Camellia sinensis) extract as the reducing agent. XRD analysis shows that the as-prepared Co 3 O 4 @Gr exhibits a cubic spinel crystal structure. From morphological analysis, the obtained Co 3 O 4 NS forms spherical clusters that are uniformly distributed on the graphene surface. FT-IR and Raman analyses confirmed the strong molecular and vibrational interactions between the Co 3 O 4 NS and Gr. The suppressed PL intensity peak of the Co 3 O 4 @Gr NCs indicated significant inhibition in the recombination of charge carriers between the hybrid orbitals within the composites. As a result, the catalytic efficiency of Co 3 O 4 @Gr NCs increased to 80% compared to pristine Co 3 O 4 , which exhibited only 45% efficiency against methylene blue (MB) dye. Moreover, the as-prepared NCs exhibited a detection limit of 0.01−224 μM, demonstrating a superior low-DPA detection with high sensitivity. The Co 3 O 4 @Gr/GCE exhibits admirable selectivity for various pesticides, fungicides, and metal ions, with outstanding reproducibility and stability. From electrochemical investigations, the highest specific capacitance values of the as-synthesized Co 3 O 4 @Gr were 349 F/g at a scan rate of 5 mV/s and 158 F/g at a current density of 1 A/g.

Capacitors↗
DOE OSTI2025

Dynamic Metal–Support Interaction Dictates Cu Nanoparticle Sintering on Al 2 O 3 Surfaces

Nanoparticle sintering remains a critical challenge in heterogeneous catalysis. In this work, we present a unified deep potential (DP) model based on the Perdew–Burke–Ernzerhof approximation of density functional theory for Cu nanoparticles on three Al 2 O 3 surfaces (γ-Al 2 O 3 (100), γ-Al 2 O 3 (110), and α-Al 2 O 3 (0001)). Using DP-accelerated simulations, we reveal that the nanoparticle size-mobility relationship strongly depends on the supporting surface. The diffusion of nanoparticles on the two γ-Al 2 O 3 surfaces is almost independent of the size of the nanoparticle, while the diffusion on α-Al 2 O 3 (0001) decreases rapidly with increasing size. Interestingly, nanoparticles with fewer than 55 atoms diffuse several times faster on α-Al 2 O 3 (0001) than on γ-Al 2 O 3 (100) at 800 K while expected to be more sluggish based on their larger binding energy at 0 K. The diffusion on α-Al 2 O 3 (0001) is facilitated by dynamic metal–support interaction (MSI), where Al atoms move out of the surface plane to optimize contact with the nanoparticle and relax back to the plane as the nanoparticle moves away. In contrast, the MSI on γ-Al 2 O 3 (100) and on γ-Al 2 O 3 (110) is dominated by more stable and directional Cu–O bonds, consistent with the limited diffusion observed on these surfaces. Our extended MD simulations provide insight into the sintering processes, showing that the dispersity of the nanoparticles strongly influences the coalescence driven by nanoparticle diffusion. We observed that the coalescence of Cu 13 nanoparticles on α-Al 2 O 3 (0001) can occur in a short time (10 ns) at 800 K even with an initial internanoparticle distance increased to 3 nm, while the coalescence on the two γ-Al 2 O 3 surfaces are inhibited significantly by increasing the initial internanoparticle distance. These findings demonstrate that the dynamics of the supporting surface is crucial to understanding the sintering mechanism and offer guidance for designing sinter-resistant catalysts by engineering the support morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Spatiotemporal Variations in the Characteristics of Mesoscale Convective Systems Over Indian Monsoon Zone

Here, this study examines cloud and precipitation properties of mesoscale convective systems (MCSs) in the Indian monsoon zone using 6 years of high-resolution satellite-based tracking data. MCSs exhibit strong regional and seasonal variations, peaking during the summer monsoon (June–September). Concentrated along a southeast-northwest band of the monsoon trough, MCS contribute 40%–70% of total precipitation and predominantly move westward at an average speed of 6.3 m s -1 . Long-lived MCSs (> 40 hr), although 10 times less frequent than short-lived MCSs (5–20 hr), produce 2–3 times more rainfall. Longer MCS lifespans and higher rainfall are associated with stronger deep-layer wind shear and enhanced lower free-tropospheric moisture at initiation. Land and ocean MCSs exhibit distinct diurnal cycles. Most land-based MCSs initiate around 16 LT and mature at 18 LT, whereas Bay of Bengal (BoB) MCSs initiate between 04 and 06 LT and peak by 14 LT. Convective precipitations from MCSs significantly surpasses that from non-MCSs systems, emphasizing their critical role in intense monsoon rainfall. Short- and long-lived MCSs showed distinct lifecycle evolution. Long-lived MCSs over the BoB show 37% larger cold-cloud shields, 44% larger precipitation feature areas, and 33% higher rain rates than their land counterparts, yielding 67% more total rainfall. These BoB MCSs also grow faster and experience more frequent cloud mergers early in their lifecycle. These findings offer critical insights into monsoonal MCSs lifecycle evolution, providing observational constraints for improving model simulations of monsoonal convection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Local structural distortions drive magnetic molecular field in compositionally complex spinel oxide

Understanding how local distortions determine the functional properties of high entropy materials, containing five or more elements at the same crystallographic site, is an open challenge. We address this for a compositionally complex spinel oxide (Mn 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )Cr 2 O 4 (A 5 Cr 2 O 4 ). By comparatively examining extended X-ray absorption fine structure on A 5 Cr 2 O 4 and its parent counterparts, ACr 2 O 4 , along with density functional theory calculations for multiple configurations, we find that the element-specific distortions go beyond the first neighbor. Specifically, the strong Jahn-Teller distortion present in CuCr 2 O 4 is found to be completely suppressed in A 5 Cr 2 O 4 even locally. Instead, there is a broad distribution of Cu-O and Cu-Cr bond distances, while other A-O distances acquire certain specific values. This study demonstrates the additional flexibility of a cationic sublattice in maintaining a uniform long-range structure, in contrast to previous reports showing only the accommodative anionic sublattice. The mean-field magnetic interactions of A 5 Cr 2 O 4 exhibit a striking resemblance to those of NiCr 2 O 4 , despite the presence of multiple magnetic ions and variable bond lengths. This originates from the comparability of bond lengths around Cr in both materials. Our study paves the way for a deeper understanding of the impact of local structural distortions on the physical properties of compositionally complex quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Exploring prokaryotic diversity in permafrost-affected soils of Ladakh’s Changthang region and its geochemical drivers

Global warming due to climate change has substantial impact on high-altitude permafrost affected soils. This raises a serious concern that the microbial degradation of sequestered carbon can result in alteration of the biogeochemical cycles. Therefore, the characterization of permafrost affected soil microbiomes, especially of unexplored high-altitude, low oxygen arid region, is important for predicting their response to climate change. This study presents the first report of the bacterial diversity of permafrost-affected soils in the Changthang region of Ladakh. The relationship between soil pH, organic carbon, electrical conductivity, and available micronutrients with the microbial diversity was investigated. Amplicon sequencing of permafrost affected soil samples from Jukti and Tsokar showed that Proteobacteria and Actinobacteria were the dominant phyla in all samples. The genera Brevitalea, Chthoniobacter, Sphingomonas, Hydrogenispora, Clostridium, Gaiella, Gemmatimonas were relatively abundant in the Jukti samples whereas the genera Thiocapsa, Actinotalea, Syntrophotalea, Antracticibcterium, Luteolibacter, Nitrospirillum dominated the Tsokar sample. Correlation analyses highlighted the influence of soil geochemical parameters on the bacterial community structure. PCoA analyses showed that the bacterial beta diversity varied significantly between the sampling locations (PERMANOVA test (F-value: 2.3316; R 2 = 0.466, p = 0.001) and similar results were also obtained while comparing genus abundance data using the ANOSIM test (R = 0.345, p = 0.007).

16S rRNA↗
DOE OSTI2025

Magnetocaloric effect observations near room temperature in few-layered chromium telluride (Cr 2 Te 3 )

Transition metal telluride compositions are explored extensively for their unique magnetic behavior. Few-layered chromium telluride (Cr 2 T e3 ) exhibits a near-room-temperature phase transition, where the material can be effectively used in applications such as magnetic refrigeration. Compared to existing magnetocaloric materials, Heusler alloys, and rare-earth-based alloys, the large-scale synthesis of mechanically exfoliated Cr 2 Te 3 involves less complexity, resulting in a stable composition. Compared to existing tellurides, Cr 2 Te 3 exhibited a large change in magnetic entropy (|ΔS M |) of 1.88 J k g−1 K −1 at a magnetic field of 4 T. A refrigeration capacity (RC) of ∼82 J kg −1 was determined from the change in magnetic entropy versus temperature curve. The results were comparable with those for existing Cr-based compounds. First-principles density functional theory (DFT) confirmed the magnetic properties of Cr 2 Te 3 , including a near-room-temperature Curie temperature, T C , consistent with experimental results. Here, structural transition was also observed using first-principles DFT, which is responsible for the magnetic behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Observation of Kolmogorov turbulence due to multiscale vortices in dusty plasma experiments

We report the experimental observation of fully developed Kolmogorov turbulence originating from self-excited vortex flows in a three-dimensional (3D) dust cloud. The characteristic -5/3 scaling of 3D Kolmogorov turbulence is consistent in both the spatial and temporal energy spectra within a statistical variation of experimental data. Additionally, the 2/3 scaling in the second-order structure function further supports the presence of Kolmogorov turbulence. We also identified a slight deviation in the tails of the probability distribution functions for velocity gradients, a reflection of intermittency. The experiment showed the formation of a dust cloud in the diffused plasma region away from the electrodes. The dust rotation was observed in multiple experimental campaigns under different discharge conditions at different spatial locations and background plasma environments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Shock wave bending around a dusty plasma void

We report on experimental observations of the bending of a dust acoustic shock wave around a dust void region. This phenomenon occurs as a planar shock wavefront encounters a compressible obstacle in the form of a void whose size is larger than the wavelength of the wave. As they collide, the central portion of the wavefront, that is the first to touch the void, is blocked while the rest of the front continues to propagate, resulting in an inward bending of the shock wave. The bent shock wave eventually collapses, leading to the transient trapping of dust particles in the void. Subsequently, a Coulomb explosion of the trapped particles generates a bow shock. The experiments have been carried out in a Direct Current (DC) glow discharge plasma, where the shock wave and the void are simultaneously created as self-excited modes of a three-dimensional dust cloud. The salient features of this phenomenon are reproduced in molecular dynamics simulations, which provide valuable insights into the underlying dynamics of this interaction.

Dust acoustic waves↗
DOE OSTI2025

Twists and turns: stacking and structure-dependent optical response in MoS 2 nanoscrolls

Transition metal dichalcogenide (TMD) nanoscrolls (NSs), specifically MoS 2 NSs, present unique structural and optical properties, exhibiting prominent photoluminescence (PL) signals despite their multilayer nature. Here, this study investigates the structural and spectroscopic characteristics of MoS 2 NSs, correlating them to show the effects of reduced interlayer interactions on excitons of MoS 2 NSs. The reduction in interlayer interaction arises from two main factors: (1) symmetry-broken mixed stacking due to misalignment between layers and (2) a highly inhomogeneous strain profile generated by the Archimedean spiral geometry with positive eccentricity. Transmission electron microscopy, field emission scanning electron microscopy, atomic force microscopy, Raman spectroscopy, and second harmonic generation measurements confirm these findings. Low-temperature PL spectroscopy explores the impact of reduced interlayer interactions on exciton properties such as exciton–phonon coupling and oscillator strength. This study provides crucial insights into the structure, stacking and unique optical properties of TMD NSs, advancing the understanding of interlayer interactions and their impacts in complex quasi-one-dimensional nanostructures.

25 ENERGY STORAGE↗
DOE OSTI2025

Giant Negative Linear Compressibility in Orthorhombic Copper Cyanide

Most reported negative linear compressibility (NLC) materials exhibit either a small NLC over a large pressure range or a high NLC over a very small pressure range. Here, we report the remarkable discovery of giant NLC in the low-temperature form of CuCN (LT-CuCN) over an unusually large pressure range. High- pressure XRD studies on LT-CuCN observed the NLC of –20.5 TPa –1 along the a axis at zero pressure, and the ambient orthorhombic phase remained stable up to 9.8 GPa. Pressure- and temperature-dependent Raman studies identified the phonon vibrations responsible for NLC and negative thermal expansion (NTE).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Engineering Na‐Rich P2‐Type Layered Oxides Through Li/Ti Dual Doping for Oxygen Redox Activation and Superior Structural Stability

Sodium layered oxides Na x MO 2 (x ≤ 1 and M = transition metal ions) have gained significant interest as sodium-ion battery (NIB) cathodes owing to their high operating voltages and potential for higher energy density compared with polyanion and Prussian blue–type cathodes. However, their practical applications are often hindered by the irreversible structural transitions leading to capacity fading during cycling. The nature and substitution of transition metal ions define the material properties and electrochemical performance. In this study, through comprehensive electrochemical characterization combined with multi-scale structural and spectroscopical analyses, we demonstrate the synergistic impacts of Lithium and Titanium doping, which not only increases overall capacity by boosting cation and anion cooperative redox contributions but also improves the rate capability and cycling stability. Specifically, Li + doping enhances the available sodium inventory for extraction, while Ti 4+ disrupts Na + /vacancy ordering at lower voltages (< 4 V) and mitigates the detrimental P2→OP4/O2 phase transition during cycling. The combined effect of Lithium and Titanium doping promotes more charge localization on Oxygen, which activates reversible lattice oxygen redox reactions at elevated voltages, contributing additional capacity beyond conventional cationic redox. This work provides crucial insights into the design of high-performance, high-capacity P2-type layered cathode materials for sodium-ion batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Shot‐Noise‐Driven Macroscopic Vibrations and Displacement Transduction in Quantum Tunnel Junctions

Back‐action is an inevitable result of quantum measurement. Although the microscopic impacts of shot‐noise back‐action have been explored, macroscopic evidence is seldom documented, especially in the field of electrical transport. Tunneling shot‐noise has been shown to excite the fundamental flexural mode of the host crystal using a sub‐GHz lumped‐element radio‐frequency quantum point contact (QPC). Here, in this study, this aspect of shot‐noise back‐action is examined at much higher operational frequencies and wider bandwidths by employing a GaAs QPC integrated into a planar superconducting cavity within the circuit‐QED framework, leading to the observation of the excitation of multiple mechanical modes. The device operates in the shot‐noise‐limited regime. Constructed on a piezoelectric platform, there is positive feedback between the electrical and mechanical degrees of freedom within the QPC. Shot‐noise excites piezoelectric vibrational modes; concurrently the resulting polarization charges enhance tunneling and develop peaks in the shot‐noise spectra at the modal frequencies. The excitation of vibrational modes is a macroscopic demonstration of measurement back‐action, and the amplitudes of the noise‐peaks enable us to calibrate the displacement sensitivity of the QPC‐resonator systems, which is in the range $≈ 35 fm/√ Hz$, making it an excellent sensor for ultra‐sensitive and rapid strain/displacement detection.

Kumbhakar, Prasanta [Indian Institute of Science E↗