Winning the Cold War: Los Alamos 1970-1992 [Slides]
A presentation by Lab Historian Alan Carr discussing the role of Los Alamos in the later cold war.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A presentation by Lab Historian Alan Carr discussing the role of Los Alamos in the later cold war.
The construction industry can be fraught with cost, schedule, and scope overruns. Los Alamos National Laboratory (LANL), a Department of Energy (DOE) / National Nuclear Security Administration (NNSA) facility located in Northern New Mexico, seems to be particularly vulnerable to cost and schedule overruns. Since Triad National Security, LLC acquired the management and operating (M&O) contract for LANL in 2018, the group has been striving to reduce the cost of construction across the forty square-mile campus.
The pyrochemical metal production operations that occur in the Plutonium Facility at Los Alamos National Laboratory perform plutonium purification with the aim to provide plutonium metal for a variety of defense- and non-defense missions within the National Nuclear Security Administration. The demands and constraints associated with the pyrochemical processing of plutonium are complex, making decision analyses challenging for program managers who require plutonium production for their mission applications. The construction of a discrete-event simulation process model is proposed to measure and report the process capacity, material throughput, equipment requirements, and dose accumulation for operators of the pyrochemical metal production operations. The process model, constructed in the ExtendSim™ software, will represent the cause-and-effect relationships between the pyrochemical processing environment and the process constraints, including criticality limitations, material control and accountability measures, chemical analysis requirements, and equipment availability. An accurate representation of the pyrochemical metal production process capacity through simulation modeling will be helpful to program managers in their efforts to forecast plutonium availability for mission applications. Furthermore, the proposed process model will be vital for future analyses that will measure the interactions between the pyrochemical metal production operations and the aqueous reprocessing operations and their ability to minimize transuranic waste disposal.
In 2022, nonviable avian eggs and one nestling were opportunistically collected at Los Alamos National Laboratory (LANL) near open detonation sites located at Technical Area (TA) 16 burn grounds, TA-36 Minie, and TA-39 Point 6. Samples were evaluated for inorganic elements (mostly metals) or per- and polyfluoroalkyl substances (PFAS). Three western bluebird (Sialia mexicana) egg samples were collected from TA-16 burn grounds. One deceased mountain bluebird (Sialia currucoides) nestling sample was collected from TA-36 Minie. One ash-throated flycatcher (Myiarchus cinerascens) egg sample was collected from TA-39 Point 6. Concentrations of inorganic elements (i.e., mostly metals) observed in this study were compared with the regional statistical reference level (RSRL), which is the upper-level bounds of background concentrations (mean + three standard deviations = 99% confidence interval). Several inorganic elements were not detected in avian eggs. All of the inorganic elements that were detected were below the RSRL and the lowest observable adverse effect level (LOAEL), when available. No PFAS compounds were detected in the mountain bluebird nestling sample collected from TA-36, and the majority of PFAS compounds were not detected in the western bluebird egg sample from TA-16. These data suggest that inorganic element and PFAS concentrations in eggs and nestlings are not of ecological concern. More data are needed to make a robust assessment and to evaluate trends over time.
The beam position monitors (BPMs) are the main diagnostic in the Los Alamos Proton Storage Ring (PSR). They are used in several applications during operations and tuning including orbit bumps and measurements of the tune, closed orbit (CO), and injection offset. However the BPM data acquisition system makes use of older technologies, such as matrix switches, that could lead to faulty measurements. This is the first statistical study of the PSR BPM perfonnance using BPM measurements. In this study, 101 consecutive CO measurements are analyzed. Reported here are the results of the statistical analysis, tune and CO measurement spreads, the BPM single turn measurement error, and examples of the observed data acquisition errors.
The Dual-Axis Radiographic Hydrodynamic Test Facility (DARHT) at Los Alamos National Laboratory consists of two linear induction accelerators at right angles to each other. The First Axis, operating since 1999, produces a nominal 20-MeV, 2-kA single beam-pulse with 60-nsec width. In contrast, the DARHT Second Axis, operating since 2008, produces up to four pulses in a variable pulse format by slicing micro-pulses out of a longer {approx}1.6-microseconds (flat-top) pulse of nominal beam-energy and -current of 17 MeV and 2 kA respectively. Bremsstrahlung x-rays, shining on a hydro-dynamical experimental device, are produced by focusing the electron beam-pulses onto a high-Z target. Variable pulse-formats allow for adjustment of the pulse-to-pulse doses to record a time sequence of x-ray images of the explosively driven imploding mock device. Herein, we present a sampling of the numerous physics and engineering aspects along with the current status of the fully operational dual axes capability. First successful simultaneous use of both the axes for a hydrodynamic experiment was achieved in 2009.
Mary Neu, Associate Director for Chemistry, Life and Earth Sciences at Los Alamos National Laboratory, delivers opening remarks at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM.
Waste disposals at Material Disposal Area G (MDA G) at Los Alamos National Laboratory (LANL) occur primarily in a series of long, rectangular pits into which layers of waste have been emplaced beginning in the late 1950's. MDA G is situated in north-central New Mexico on top of Mesita del Buey, a narrow 3 km long mesa in the Parajito Plateau. The mesa is composed primarily of volcanic tuff from two principle volcanic eruptions in the Jemez Mountains which deposited the Otowi and Tshirege Members of the Bandelier Tuff. The Cerros del Rio Basalt underlay the tuff units and extends down for approximately 200 meters. The water table lies within the basalts at around 300 m below the surface of the mesa. The local climate is temperate and semiarid, averaging around 34 cm of precipitation per year. Ambient subsurface moisture conditions are dry, with water content typically below 10%. During disposal operations, open pits are subject to enhanced infiltration compared to the final covered configuration due to the unvegetated disturbed surface and precipitation events. Additionally, water added to the pits during disposal operations for tasks like waste compaction and dust suppression introduces additional moisture to the system during disposal operations that could potentially provide a pathway for contaminants in the waste zone to migrate through the unsaturated zone. Modeling was conducted using the HYDRUS-2D/3D software to evaluate the spatial extent of saturation changes and fluxes across geologic layer interfaces in the unsaturated zone throughout the life cycle of a waste pit. A general 2-dimensional framework was developed that included a cross section of a waste pit and the underlying geologic units. Several geological layerings were developed to represent the variation across the mesa at Area G. The model was run stochastically for hundreds of realizations to understand how variations in hydraulic parameters (e.g., porosity, saturated hydraulic conductivity, Van Genuchten parameters, etc.) and operational parameters (e.g., pit open period duration, pit depth, initial saturation of the waste zone, etc.) affect the extent of saturation changes and fluxes in the deep unsaturated zone. Distributions for these parameters were developed based on available site data. Results of the unsaturated zone modeling indicate that a significant amount of water can reach the lower unsaturated zone under some circumstances, particularly when the amount of water introduced during pit operations is high. A statistical study of modeling results was performed to develop a regression that describes the variations of water flux in time at the geological layer interfaces. These statistical model results will be used to evaluate solute transport in a future effort. (authors)
The Detector for Advanced Neutron Capture Experiments (DANCE) is designed for neutron capture measurements on very small and/or radioactive targets. The DANCE array of 160 BaF{sub 2} scintillation detectors is located at the Lujan Center at the Los Alamos Neutron Science Center (LANSCE). Accurate measurements of neutron capture data are important for many current applications as well as for basic understanding of neutron capture. The gamma rays following neutron capture reactions have been studied by the time-of-flight technique using the DANCE array. The high granularity of the array allows measurements of the gamma-ray multiplicity. The gamma-ray multiplicities and energy spectra for different multiplicities can be measured and analyzed for spin and parity determination of the resolved resonances.
Snow/ground interface temperature measurements were collected at two sites in Los Alamos, New Mexico. Data were collected from November 29, 2023 to April 8, 2024 using iButton Link DS1921G-F5# Thermochron miniature temperature sensors (https://www.ibuttonlink.com/products/ds1921g). These sensors are a cost-efficient way to collect snowpack temperatures at a higher spatial resolution than what is normally achieved. iButton data were collected every 3 hours from a total of 19 iButtons. iButtons were placed in pairs, with one iButton placed at the ground surface and another buried 1 - 5 cm below the ground surface. One buried iButton did not successfully collect data, and therefore was excluded from this dataset. Data were collected throughout the snow cover season so that snowpack characteristics could be derived using the temperature data. Specifically, this dataset was used as a validation source for a novel machine learning approach to estimating snow depth (see related publication). Sensors were placed in areas with bare ground or minimal grass coverage, located away from any large vegetation. At Site A (TA51), manual snow depths were collected as validation data. These measurements were taken next to iButtons periodically throughout the winter, and notes on other precipitation types were also recorded. At Site B (TA6 Meteorological Station), a nearby sensor collected snow depths throughout the winter. This dataset contains one *.csv file of snow/ground interface temperatures at two sites, one *.csv file of manually collected snow depths, and one *.kml file of sensor locations. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic) was a 15-year research effort (2012-2027) to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy’s Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy’s Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).
Presentation illustrating the benefits of working and studying at the Los Alamos site
The Environmental Protection and Compliance-Compliance Programs (EPC-CP) group at Los Alamos National Laboratory (LANL) uses the Clean Air Act Assessment Package 1988 (CAP-88, Littleton 2020) PC model (Version 4.1) to estimate radiological doses for a set of areal sectors surrounding a release location, in order to satisfy the Environmental Protection Agency (EPA) National Emission Standards for Hazardous Air Pollutants (NESHAP) dose calculation requirement in 40 CFR 61 Subpart H. Among several types of data that must be prepared for CAP-88 input is a text file of meteorological data (“WIND” file), consisting of the joint frequency of wind direction, wind speed, and atmospheric stability categories. EPC-CP produces customized WIND files by running a CAP-88 utility program on a user generated text file of wind data in a different format, known as a STability ARray (STAR) file (Turner, 1964). At LANL, EPC-CP meteorologists prepare customized STAR files with data over desired time periods at selected meteorological towers. A custom program written in Precision Visuals -Workstation Analysis and Visualization Environment (PV-WAVE), a commercial Fortran-like language, is used to read LANL meteorological data and write a STAR file; the executable filename is “Star.out”. However, the outdated PV-WAVE utility program is being phased out by EPC-CP, due to the inefficient process to run it and an inability to modify the code. To preserve the ability to create customized meteorological data for CAP-88 in a way that will be easy to use and maintain, a new replacement utility program, written in the Python programming language, has been developed. The new, improved program reads a data file from any LANL meteorological tower, and at each desired observation time, determines the wind direction, wind speed, and stability categories defined in the CAP-88 documentation. The frequencies of all combinations of the three sets of categories are calculated and written to a file in the STAR format, which can later be converted to a WIND file for input into CAP-88.
This report describes a project conducted by Los Alamos National Laboratory (LANL) and 3AE Green to determine the base flood elevations for the return periods associated with Flood Design Categories (FDC) 1-3 as identified in DOE-STD-1020-2016. As part of this work, 3AE Green performed two-dimensional (2D) hydraulic modeling of the Design Basis Flood Level (DBFL) for the primary watersheds within the LANL boundary and site-specific sub-watersheds associated with specific existing LANL facilities. The modeling covered an area of approximately 67 square miles.
The waste management program at Los Alamos National Laboratory (LANL) is undergoing significant transition to establish a lean highly functioning waste management program that will succeed the large environmental cleanup waste management program. In the coming years, the environmental cleanup activities will be mostly completed and the effort will change to long-term stewardship. What will remain in waste management is a smaller program focused on direct off-site shipping to cost-effectively enable the enduring mission of the laboratory in support of the national nuclear weapons program and fundamental science and research. It is essential that LANL implement a highly functioning efficient waste management program in support of the core missions of the national weapons program and fundamental science and research - and LANL is well on the way to that goal. As LANL continues the transition process, the following concepts have been validated: - Business drivers including the loss of onsite disposal access and completion of major environmental cleanup activities will drive large changes in waste management strategies and program. - A well conceived organizational structure; formal management systems; a customer service attitude; and enthusiastic managers are core to a successful waste management program. - During times of organizational transition, a project management approach to managing change in a complex work place with numerous complex deliverables is successful strategy. - Early and effective engagement with waste generators, especially Project Managers, is critical to successful waste planning. - A well-trained flexible waste management work force is vital. Training plans should include continuous training as a strategy. - A shared fate approach to managing institutional waste decisions, such as the LANL Waste Management Recharge Board is effective. - An efficient WM program benefits greatly from modern technology and innovation in managing waste data and reports. - Use of six-sigma tools can help improve the quality and efficiency of waste management processes. - A fair, easy to understand, transparent, and well-overseen process for distributing the cost of waste disposal and waste program oversight is essential. (authors)
We successfully produced specimens made from porcelain resin (Tethon3D) in three different orientations (Z=45mm, Z=4mm and Z=3mm) without any cracks or delamination, both before and after post-processing. Four-point flexural tests were conducted on these specimens. Among the three orientations, specimens printed in the Z=4mm direction showed the best flexural strength, followed by Z=3mm and Z=45mm.
When geologist John Rakovan needed better tools to investigate whether a dazzling 217.78-gram piece of gold was in fact the world's largest single-crystal specimen - a distinguishing factor that would not only drastically increase its market value but also provide a unique research opportunity - he traveled to Los Alamos National Laboratory's Lujan Neutron Scattering Center to peer deep inside the mineral using neutron diffractometry. Neutrons, different from other probes such as X-rays and electrons, are able to penetrate many centimeters deep into most materials. Revealing the inner structure of a crystal without destroying the sample - imperative, as this one is worth an estimated $1.5 million - would allow Rakovan and Lujan Center collaborators Sven Vogel and Heinz Nakotte to prove that this exquisite nugget, which seemed almost too perfect and too big to be real, was a single crystal and hence a creation of nature. Its owner, who lives in the United States, provided the samples to Rakovan to assess the crystallinity of four specimens, all of which had been found decades ago in Venezuela.
A metallurgical study was requested as part of the Los Alamos National Laboratory (LANL) W76-1 life-extension program (LEP) involving a lifetime analysis of type 304 stainless steel pit tubes subject to repeat bending loads during assembly and disassembly operations at BWXT/Pantex. This initial test phase was completed during the calendar years of 2004-2006 and the report not issued until additional recommended tests could be performed. These tests have not been funded to this date and therefore this report is considered final. Tubes were reportedly fabricated according to Rocky Flats specification P14548 - Seamless Type 304 VIM/VAR Stainless Steel Tubing. Tube diameter was specified as 0.125 inches and wall thickness as 0.028 inches. A heat treat condition is not specified and the hardness range specification can be characteristic of both 1/8 and 1/4 hard conditions. Properties of all tubes tested were within specification. Metallographic analysis could not conclusively determine a specified limit to number of bends allowable. A statistical analysis suggests a range of 5-7 bends with a 99.95% confidence limit. See the 'Statistical Analysis' section of this report. The initial phase of this study involved two separate sets of test specimens. The first group was part of an investigation originating in the ESA-GTS [now Gas Transfer Systems (W-7) Group]. After the bend cycle test parameters were chosen (all three required bends subjected to the same amount of bend cycles) and the tubes bent, the investigation was transferred to Terri Abeln (Metallurgical Science and Engineering) for analysis. Subsequently, another limited quantity of tubes became available for testing and were cycled with the same bending fixture, but with different test parameters determined by T. Abeln.
This is a photograph/poster of the Pit Manufacturing-A990 team at Los Alamos National Laboratory.