Search NASA⌕ Search

SEARCH · Search NASA

Results for “Localization Error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

The AWAKEN wind farm benchmark, Part 2: Modeling results

Accurately modeling wind farm performance in complex atmospheric flows remains a challenge. This paper presents the modeling results of the American WAKE experimeNt (AWAKEN) wind farm benchmark, a collaborative effort involving 16 research groups from academia and industry within the International Energy Agency Wind Technology Collaboration Programme Task 57. The study evaluates a diverse suite of simulation tools, ranging from fast-running engineering wake models to high-fidelity large-eddy simulations, against a diurnal case study observed during the AWAKEN campaign. The benchmark utilized a three-phase structure to progressively assess model performance as observational data availability increased. Initial blind predictions showed that higher-fidelity models did not uniformly outperform simpler simulation tools. A distinct spatial bias was observed where models struggled to resolve the interplay between a low-level jet, wakes, and terrain-induced flow acceleration. In subsequent phases, leveraging additional measurements for model improvement led to a reduction in mean absolute error across the model ensemble; however, this effect was most pronounced in engineering wake models, where targeted calibration reduced error by up to 40~\%. Overall, the study demonstrates that inflow characterization remains a primary prerequisite for accuracy, particularly for models relying on coarse forcing datasets. While the limited ability to resolve local terrain-flow interactions under single-day conditions represent a recognized constraint, the overall findings on wake modeling and real-world validation still provide valuable guidance for model application and for mitigating this limitation.

Bodini, Nicola↗
DOE OSTI2021

A crystal plasticity model with an atomistically informed description of grain boundary sliding for improved predictions of deformation fields

Crystal plasticity (CP) is a powerful meso-scale technique for deformation modeling in polycrystalline materials. Crystal plasticity models typically do not include an explicit description of grain boundary (GB) sliding, which could lead to inaccurate predictions of strain distributions, especially in the vicinity of GBs. In the present study, a CP model is developed that includes GB sliding as an additional deformation mechanism and models the interaction between slip and GB sliding. Atomistic simulations are used to formulate the constitutive model for GB sliding and its interaction with incident slip. The deformation fields and structure of the GBs are obtained directly from experimental characterization and are faithfully reproduced as bicrystal systems for molecular dynamics simulations. The GBs are modeled as random-type (non-coincidence, asymmetrical) boundaries as observed from experimental data. The underlying atomistic-scale mechanism for pure sliding of random GBs was found to be analogous to fluid-flow. The interaction between incident slip and a sliding GB caused local increases in stress concentration, which further led to a momentary increase in the local sliding rate. The displacement profiles at the sliding GBs computed from the CP model with sliding accommodation are 38% more accurate than the baseline CP model as quantified by the mean squared error between the simulations and experiment. Here these results help improve the sophistication and accuracy of deformation modeling by including physics-based descriptions for GB sliding and its interaction with slip, eventually leading to more reliable predictions of micromechanical quantities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

High-Fidelity CFD Simulation of Mixed Convection and Forced Convection in a Pebble Bed Test Reactor Core

The Hermes low-power [35-MW(thermal)] reactor will be built and operated by Kairos Power LLC (KP) to demonstrate its fluoride salt-cooled high-temperature reactor (FHR) technology. In the KP FHR, the reactor core is composed of randomly packed pebbles with TRISO fuel particles inside with FLiBe flow upward through the core acting as a coolant. Previous numerical and experimental studies have been limited to either a small-size bed or to a lack of detailed measurements for heat transfer. Here, to address the lack of high-fidelity heat transfer data in a real-size FHR core, in this study, we simulated a pebble bed core with 34 374 pebbles randomly packed, similar to the Hermes reactor's size. The core radius was 14 times that of the pebble diameter, while the core height was 45 times. In this work, we were particularly interested in a mixed convection regime, where buoyancy is important. Therefore, we performed several large-eddy simulations at different Reynolds numbers (160 to 1000) with gravitational force included. The spectral element computational fluid dynamics code NekRS with graphics processing unit acceleration was used for this study. The low-Mach number approximation was applied to address property changes in the FLiBe and to account for buoyancy. A pure hexahedral mesh with 60 million elements was generated by the Voronoi cell method. At the polynomial order of 5, the total degrees of freedom was 7.5 billion. The developed case in this work is the first of its kind in terms of size and complexity. The local numerical data across the domain were obtained and compared with empirical correlations. After examining the data, we found the following conclusions. For pressure drop, the Reger correlation predicted less than a 5% error. On the other hand, for heat transfer, the Wakao correlation outperformed the others. Based on our findings, we recommend the use of the Wakao correlation for the Nusselt number calculation, and for pressure drop, the KTA (Kerntechnischer Ausschuss) correclation, among the available experimental correlations. In conclusion, the Reger direct numerical simulation-driven correlation for pressure drops should also be considered, given its best agreement with our calculations.

Mixed Convection↗
DOE OSTI2023

ORBIT simulations of fast ion power loads on the wall of the Divertor Tokamak Test

Abstract Neutral beam injection in tokamaks produces a population of fast ions, which interact with 3D magnetic fields in a variety of ways, often resulting in energetic particle losses in very short times to the wall. Careful design of neutral beams and active control of error fields helps to keep these losses to a minimum. Nevertheless, past experience in tokamaks in the 1980s and detailed simulations for future machines, such as International Thermonuclear Experimental Reactor, suggest that very localized fast ion losses (‘hot spots’) can be present, even if the overall losses are low. In this paper, we discuss this issue in the Divertor Tokamak Test (DTT) project, and we show that in the standard single-null full-power scenario of the DTT, fast ions produce two hot spots, corresponding approximately to the beam injection and exit toroidal angles: the former being mainly due to prompt losses/passing particles, while the latter is due to trapped ions. However, the maximum power load in these spots is of the order ∼ 63 kW m −2 , below the tolerance of plasma-facing components of the machine.

Physics↗
DOE OSTI2020

Extreme Scale Infrasound Inversion and Prediction for Weather Characterization and Acute Event Detection

Accurate and timely weather predictions are critical to many aspects of society with a profound impact on our economy, general well-being, and national security. In particular, our ability to forecast severe weather systems is necessary to avoid injuries and fatalities, but also important to minimize infrastructure damage and maximize mitigation strategies. The weather community has developed a range of sophisticated numerical models that are executed at various spatial and temporal scales in an attempt to issue global, regional, and local forecasts in pseudo real time. The accuracy however depends on the time period of the forecast, the nonlinearities of the dynamics, and the target spatial resolution. Significant uncertainties plague these predictions including errors in initial conditions, material properties, data, and model approximations. To address these shortcomings, a continuous data collection occurs at an effort level that is even larger than the modeling process. It has been demonstrated that the accuracy of the predictions depends on the quality of the data and is independent to a certain extent on the sophistication of the numerical models. Data assimilation has become one of the more critical steps in the overall weather prediction business and consequently substantial improvements in the quality of the data would have transformational benefits. This paper describes the use of infrasound inversion technology, enabled through exascale computing, that could potentially achieve orders of magnitude improvement in data quality and therefore transform weather predictions with significant impact on many aspects of our society.

58 GEOSCIENCES↗
DOE OSTI2021

ASCEND: Asymptotically compatible strong form foundations for nonlocal discretization

Nonlocal models naturally handle a range of physics of interest to SNL, but discretization of their underlying integral operators poses mathematical challenges to realize the accuracy and robustness commonplace in discretization of local counterparts. This project focuses on the concept of asymptotic compatibility, namely preservation of the limit of the discrete nonlocal model to a corresponding well-understood local solution. We address challenges that have traditionally troubled nonlocal mechanics models primarily related to consistency guarantees and boundary conditions. For simple problems such as diffusion and linear elasticity we have developed complete error analysis theory providing consistency guarantees. We then take these foundational tools to develop new state-of-the-art capabilities for: lithiation-induced failure in batteries, ductile failure of problems driven by contact, blast-on-structure induced failure, brittle/ductile failure of thin structures. We also summarize ongoing efforts using these frameworks in data-driven modeling contexts. This report provides a high-level summary of all publications which followed from these efforts.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Efficiently improving the performance of noisy quantum computers

Using near-term quantum computers to achieve a quantum advantage requires efficient strategies to improve the performance of the noisy quantum devices presently available. We develop and experimentally validate two efficient error mitigation protocols named "Noiseless Output Extrapolation" and "Pauli Error Cancellation" that can drastically enhance the performance of quantum circuits composed of noisy cycles of gates. By combining popular mitigation strategies such as probabilistic error cancellation and noise amplification with efficient noise reconstruction methods, our protocols can mitigate a wide range of noise processes that do not satisfy the assumptions underlying existing mitigation protocols, including non-local and gate-dependent processes. We test our protocols on a four-qubit superconducting processor at the Advanced Quantum Testbed. We observe significant improvements in the performance of both structured and random circuits, with up to 86 % improvement in variation distance over the unmitigated outputs. Our experiments demonstrate the effectiveness of our protocols, as well as their practicality for current hardware platforms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Active learning emulators for nuclear two-body scattering in momentum space

In this work we extend the active learning emulators for two-body scattering in coordinate space with error estimation, recently developed by Maldonado et al. [Phys. Rev. C 112, 024002], to coupled-channel scattering in momentum space. Our full-order model (FOM) solver is based on the Lippmann-Schwinger integral equation for the scattering t-matrix as opposed to the radial Schrödinger equation. We use (Petrov-)Galerkin projections and high-fidelity calculations at a few snapshots across the parameter space of the interaction to construct efficient reduced-order models (ROMs), trained by a greedy algorithm for locally optimal snapshot selection. Both the FOM solver and the corresponding ROMs are implemented efficiently in Python using Google's JAX library. We present results for emulating scattering phase shifts in coupled and uncoupled channels and cross sections, and assess the accuracy of the developed ROMs and their computational speedup factors. We also develop emulator error estimation for both the t-matrix and the total cross section. The software framework for reproducing and extending our results is publicly available. Together with our recent advances in developing active-learning emulators for three-body scattering, these emulator frameworks set the stage for full Bayesian calibrations of chiral nuclear interactions and optical models against scattering data with quantified emulator errors.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Chemical evolution of local post-starburst galaxies: implications for the mass–metallicity relation

ABSTRACT We use the stellar fossil record to constrain the stellar metallicity evolution and star-formation histories of the post-starburst (PSB) regions within 45 local PSB galaxies from the MaNGA survey. The direct measurement of the regions’ stellar metallicity evolution is achieved by a new two-step metallicity model that allows for stellar metallicity to change at the peak of the starburst. We also employ a Gaussian process noise model that accounts for correlated errors introduced by the observational data reduction or inaccuracies in the models. We find that a majority of PSB regions (69 per cent at >1σ significance) increased in stellar metallicity during the recent starburst, with an average increase of 0.8 dex and a standard deviation of 0.4 dex. A much smaller fraction of PSBs are found to have remained constant (22 per cent) or declined in metallicity (9 per cent, average decrease 0.4 dex, standard deviation 0.3 dex). The pre-burst metallicities of the PSB galaxies are in good agreement with the mass–metallicity (MZ) relation of local star-forming galaxies. These results are consistent with hydrodynamic simulations, which suggest that mergers between gas-rich galaxies are the primary formation mechanism of local PSBs, and rapid metal recycling during the starburst outweighs the impact of dilution by any gas inflows. The final mass-weighted metallicities of the PSB galaxies are consistent with the MZ relation of local passive galaxies. Our results suggest that rapid quenching following a merger-driven starburst is entirely consistent with the observed gap between the stellar mass–metallicity relations of local star-forming and passive galaxies.

Leung, Ho-Hin (ORCID:0000000304865178)↗
DOE OSTI2026

Errors in reconstruction of dichroic X-ray orientation tomography due to polarization rotation of the incident beam

Dichroic X-ray tomography is a technique in which the crystal orientation or magnetization of a sample is resolved in three dimensions. The best-known uses of this technique are for observation of magnetic moments via circular dichroism, using left- and right-handed circularly polarized X-ray beams. Another variant uses linear dichroism to resolve the crystal orientation. In both these techniques, it is assumed that the absorption of X-rays along a path inside a material can be computed as a line integral of a local absorption coefficient along the ray path. For linear dichroism, this assumption is inaccurate because the polarization of the beam changes along the propagation direction when the optic axis of the material is not aligned along the polarization. In this work, a finite-element Maxwell solver is used to simulate tomography and reconstructions. The propagation effect can lead to significant errors in the reconstructed orientations. These errors may be mitigated by taking data at additional angles or by operating at energies at which the dichroism is weak. An iterative approach is proposed which may allow accurate reconstruction with fewer data than would otherwise be required.

X-ray linear dichroism↗
DOE OSTI2020

An augmented Lagrangian filter method

Here, we introduce a filter mechanism to enforce convergence for augmented Lagrangian methods for nonlinear programming. In contrast to traditional augmented Lagrangian methods, our approach does not require the use of forcing sequences that drive the first-order error to zero. Instead, we employ a filter to drive the optimality measures to zero. Our algorithm is flexible in the sense that it allows for equality-constrained quadratic programming steps to accelerate local convergence. We also include a feasibility restoration phase that allows fast detection of infeasible problems. We provide a convergence proof that shows that our algorithm converges to first-order stationary points. We provide preliminary numerical results that demonstrate the effectiveness of our proposed method.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Power generation forecasting for solar plants based on Dynamic Bayesian networks by fusing multi-source information

A Dynamic Bayesian network (DBN) model for solar power generation forecasting in solar plants is proposed in this paper. The key idea is to fuse sensor data, operational indicators, meteorological data, lagged output power information, and model errors for more accurate short-term (e.g., hours) and mid-term (e.g., days to weeks) power generation forecasting. The proposed DBN augments automated data-driven structure learning with expert knowledge encoding using continuous and categorical data given constraints to represent causal relationships within a solar inverter system. Additionally, an error compensation mechanism is proposed to capture temporal fluctuation. The effectiveness of the DBN on solar power generation forecasting was evaluated by rolling window analysis with one-year testing data collected from a local solar plant. The proposed DBN is compared with four state-of-art methods including support-vector regression (SVR), k-nearest neighbors (kNN), artificial neural network (ANN), and long short-term memory (LSTM) models. The result show that the proposed DBN achieves better accuracy in general, and it is not as data-hungry as some neural network-based models. The proposed DBN is also shown to have robust and consistent forecasting power with different forecasting horizons. The accuracy is 92% - 95% from one hour to one week ahead forecasting.

14 SOLAR ENERGY↗
DOE OSTI2021

Electronic structure of mononuclear Cu-based molecule from density-functional theory with self-interaction correction

In this paper, we investigate the electronic structure of a planar mononuclear Cu-based molecule [Cu(C 6 H 4 S 2 ) 2 ] z in two oxidation states ( z = –2, –1) using density-functional theory (DFT) with Fermi–Löwdin orbital (FLO) self-interaction correction (SIC). The dianionic Cu-based molecule was proposed to be a promising qubit candidate. Self-interaction error within approximate DFT functionals renders severe delocalization of electron and spin densities arising from 3 d orbitals. The FLO-SIC method relies on optimization of Fermi–Löwdin orbital descriptors (FODs) with which localized occupied orbitals are constructed to create SIC potentials. Starting with many initial sets of FODs, we employ a frozen-density loop algorithm within the FLO-SIC method to study the Cu-based molecule. We find that the electronic structure of the molecule remains unchanged despite somewhat different final FOD configurations. In the dianionic state (spin S = 1/2), FLO-SIC spin density originates from the Cu d and S p orbitals with an approximate ratio of 2:1, in quantitative agreement with multireference calculations, while in the case of SIC-free DFT, the orbital ratio is reversed. Overall, FLO-SIC lowers the energies of the occupied orbitals and, in particular, the 3 d orbitals unhybridized with the ligands significantly, which substantially increases the energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) compared to SIC-free DFT results. The FLO-SIC HOMO–LUMO gap of the dianionic state is larger than that of the monoanionic state, which is consistent with experiment. Our results suggest a positive outlook of the FLO-SIC method in the description of magnetic exchange coupling within 3 d -element-based systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Evaluating the location capabilities of a regional infrasonic network in Utah, US, using both ray tracing-derived and empirical-derived celerity-range and backazimuth models

SUMMARY More realistic models for infrasound signal propagation across a region can be used to improve the precision and accuracy of spatial and temporal source localization estimates. Motivated by incomplete infrasound event bulletins in the Western US, the location capabilities of a regional infrasonic network of stations located between 84–458 km from the Utah Test and Training Range, Utah, USA, is assessed using a series of near-surface explosive events with complementary ground truth (GT) information. Signal arrival times and backazimuth estimates are determined with an automatic F-statistic based signal detector and manually refined by an analyst. This study represents the first application of three distinct celerity-range and backazimuth models to an extensive suite of realistic signal detections for event location purposes. A singular celerity and backazimuth deviation model was previously constructed using ray tracing analysis based on an extensive archive of historical atmospheric specifications and is applied within this study to test location capabilities. Similarly, a set of multivariate, season and location specific models for celerity and backazimuth are compared to an empirical model that depends on the observations across the infrasound network and the GT events, which accounts for atmospheric propagation variations from source to receiver. Discrepancies between observed and predicted signal celerities result in locations with poor accuracy. Application of the empirical model improves both spatial localization precision and accuracy; all but one location estimates retain the true GT location within the 90 per cent confidence bounds. Average mislocation of the events is 15.49 km and average 90 per cent error ellipse areas are 4141 km2. The empirical model additionally reduces origin time residuals; origin time residuals from the other location models are in excess of 160 s while residuals produced with the empirical model are within 30 s of the true origin time. We demonstrate that event location accuracy is driven by a combination of signal propagation model and the azimuthal gap of detecting stations. A direct relationship between mislocation, error ellipse area and increased station azimuthal gaps indicate that for sparse networks, detection backazimuths may drive location biases over traveltime estimates.

58 GEOSCIENCES↗
DOE OSTI2024

Minimization of Measurement Uncertainty in Optical Frequency Domain Reflectometry

Optical frequency domain reflectometry (OFDR) is a technique for interrogating optical fiber sensors to generate relative, quasi-distributed measurements. Although Optical frequency domain reflectometry (OFDR) is increasingly being adopted for aerospace, energy production, and structural monitoring applications, the quantification of uncertainty for OFDR measurements has not been developed beyond sparse empirical relationships. To address this knowledge gap, an uncertainty metric for OFDR measurements was developed. This uncertainty metric was applied to weight the edges between OFDR measurements on directed correlation graphs and analyzed to minimize the cumulative uncertainty. In conclusion, this work is the first to propose an uncertainty metric for OFDR and provides a generalized mathematical framework for optimizing OFDR hardware selection, optical fiber sensor selection, and postprocessing strategy.

42 ENGINEERING↗
DOE OSTI2024

Two–Photon Printing of Base–Catalyzed Resins Involving Thiol–Michael Network Formation

Two-photon printing is accomplished using a photobase generator, 2-(2-nitrophenyl)-propyloxycarbony tetramethyl guanidine, to locally catalyze thiol-ene coupling between multifunctional monomers while mitigating chain-growth polymerization with free radical scavengers. Microstructures printed from base-catalyzed resins exhibit higher resolution (linewidths < 400 nm) and lower print error (<3%) than analogous microstructures printed using a photosensitive, free radical initiator. Further, Raman spectroscopy reveals that resins polymerized using the photobase generator in the presence of free radical scavengers exhibit higher selectivity of thiol-ene coupling over radical polymerization, resulting in stiffer, more uniform polymer networks. The base-catalyzed resins are capable of producing 3D microstructures printed with high accuracy and minimal post-processing defects. As a result, a direct comparison between free radical and base-initiated resins highlights the need for mindful consideration of how chemical reaction pathway influences printability and network end-properties when designing resins.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effective properties of semitransparent radiative cooling materials with spectrally variable properties

Radiative cooling is a promising solid-state, non-vapor-compression technology for passive refrigeration and air conditioning. Although this phenomenon occurs naturally, achieving a significant amount of cooling to make it a technically and economically viable technology requires highly engineered, spectrally selective radiative surfaces. These characteristics make radiative cooling difficult to estimate, particularly when it is integrated with other systems such as photovoltaic panels or building envelopes. The complexity further increases when the substrate also participates in the radiative cooling (along with the radiative coating). Energy estimation is becoming increasingly critical because of the recent focus on the semitransparent radiative coatings that transmit a variety of colors to enhance the aesthetic appeal of the system. In this work, we propose an iterative method to calculate the effective radiative properties, which provides the same net radiative cooling that would be observed using the spectral properties at both the coating and substrate surfaces. Compared to traditional methods that rely on either computationally expensive full spectral analysis or methods for averaging each radiative surface parameter locally, our proposed method focuses on calculating effective properties that provide the same the net cooling effect as a full spectral analysis by accounting the emissivity, absorptivity, and transmissivity collectively, thereby providing an overall estimation error of less than 0.2%. We believe that this study will be beneficial to the engineering communities that employ complex simulation codes and require lumped solar and thermal radiation related parameters.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Global micro-tearing modes in the wide pedestal of an NSTX plasma

Global linear electromagnetic gyrokinetic simulations of micro-tearing modes (MTMs) growing in the wide pedestal of the ELM-free NSTX discharge #132 588 are reported. Two micro-tearing branches growing near the surfaces of safety factor q = 4 (pedestal top) and q=5–6 (pedestal) are simulated. The frequencies of these MTMs with low toroidal mode number (n ranging from 3 to 6) are in agreement with the ones of quasi-coherent fluctuations present on the magnetic spectrogram. No kinetic ballooning mode (KBM) is observed at experimental values of β; instead, the experimental plasma lies 20% below the critical global KBM threshold. This confirms local simulation results stating that experimental NSTX profiles lie in the KBM stability region. Carbon impurities, which are abundant in this plasma, were found to play a significant role. Neglecting them leads to a ∼50% error in the growth rates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗