SEARCH · Search NASA

Results for “Loss Rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS1988

X-ray induced stellar mass loss near active galactic nuclei

The effects of UV and X-ray radiation on stars in active galactic nuclei (AGN) are critically evaluated. Mass loss rates in X-ray-induced winds are evaluated for realistic red giant models, and the effects of the ablation of stellar envelopes by radiation pressure are considered. The importance of X-ray-induced mass loss in the standard quasar model is evaluated and whether it can provide a source of accretion fuel or emission-line clouds is discussed. It is concluded that thermal winds driven by X-ray heating are a minor total supply of mass to AGN, but that thermal plus line-driven winds and stellar ablation may increase the mass loss and improve the chances for supplying a fraction of the necessary mass supply to the central object. It is speculated that when steady winds are inefficient, complex time-dependent processes due to X-ray energy injection deep into a stellar atmosphere could still release significant mass from stars.

Voit, G. Mark↗

NASA NTRS2005

Measurements of the Coefficient of Restitution of Quartz Sand on Basalt: Implications for Abrasion Rates on Earth and Mars

Knowledge of the rates at which rocks abrade from the impact of saltating sand provides important input into estimating the age and degree of modification of arid surfaces on Earth and Mars. Previous work has relied on measuring mass loss rates in the field and the laboratory. The susceptibility of rocks and other natural materials has been quantified on a relative scale from laboratory studies.

Banks, M.↗

NASA NTRS1982

Spallation of the Galileo probe heat shield

The Galileo probe heat shield will encounter severe radiative and convective heating during entry into Jupiter's atmosphere. The shield is made of two different carbon phenolic composites; one is chopped-molded, and the other is tape-wrapped, both of which tend to spall under intense heating conditions. To characterize this phenomenon, an experimental program, using a gasdynamic laser, was initiated. Tests were performed at a variety of radiation intensities, and both the total and spallation mass-loss rates were measured and correlated with intensity. These correlations were then applied to calculated flight heating conditions for two model atmospheres. Entry of a 310-kg probe into the nominal atmosphere would result in a spallation mass loss of 6.3 kg, or 7.4% of the expected thermochemical mass loss. Similarly, entry of that probe into the cool-dense atmosphere would result in 11.9 kg of spallation, or about 10% of the expected thermochemical mass loss.

Lundell, J. H.↗

NASA NTRS1995

Hot bottom burning in asymptotic giant branch stars and its effect on oxygen isotopic abundances

A self-consistent calculation of asymptotic giant branch (AGB) evolution was carried out, including nucleosynthesis at the base of the convective envelope (hot bottom burning). Hot bottom burning was found to occur for stars between approximately 4.5 and approximately 7 solar mass, producing envelopes with O-18/O-16 less than or equal to 10(exp -6) and 10(exp -3) approximately less than or equal O-17/O-16 approximately less than or equal to 10(exp -1). The O-17 abundance depends sensitively on the nuclear O-17-destruction rate; this rate is only loosely constrained by the requirement that first and second dredge-up models match O-isotope observations of red giant branch (RGB) stars (Boothroyd, Sackmann, & Wasserburg 1994). In some cases, high mass-loss rates can terminate hot bottom burning before further O-17 enrichment takes place or even before all O-18 is destroyed. These predictions are in accord with the very limited stellar observations of J type carbon stars on the AGB and with some of the circumstellar Al2O3 grains from meteorites. In contrast, precise data from a number of grains and data from most low-mass S and C AGB stars (approximately less than 1.7 solar mass) lie in a region of the O-18/O-16 versus O-17/O-16 diagram that is not accessible by first and second dredge-up or by hot bottom burning. We conclude that for AGB stars, the standard models of stellar evolution are not in accord with these observations. We surmise that an additional mixing mechanism must exist that transports material from the cool bottom of the stellar convective envelope to a depth at which O-18 is destroyed. This 'cool bottom processing' mechanism on the AGB is similar to extra mixing mechanisms proposed to explain the excess C-13 (and depleted C-12) observed in the earlier RGB stage of evolution and the large Li-7 depletion observed in low-mass main-sequence stars.

Boothroyd, Arnold I.↗

NASA NTRS1992

The ancient oxygen exosphere of Mars: Implications for atmosphere evolution

This study involves the calculation, by the 2-stream method of Nagy and Cravens, of 'hot' oxygen exosphere density profiles for 'ancient' atmospheres and ionospheres (e.g., different extreme ultraviolet fluxes) and the associated escaping fluxes. We computed the total production rates above different 'nominal' ionopause altitudes (not taking into account the fact that some will reenter the atmosphere). We do not consider the additional neutral escape due to the sputtering process described by Luhmann and Kozyra. The results presented here thus represent conservative estimations of the neutral escape fluxes, but generous estimates of ion loss rates (except that here we do not consider charge exchange and impact ionization ion production processes). Further work along the lines of Luhmann and Kozyra can lead to estimates of sputtering losses over time and the roles played by impact ionization and charge exchange.

Zhang, M. H. G.↗

NASA NTRS1982

Galileo probe forebody flowfield predictions during Jupiter entry

This paper presents forebody flowfield solutions for Jupiter entry conditions where the ablation injection rate is coupled with the surface heating rate. The calculations are made with a time-dependent viscous-shock-layer analysis where the flow is assumed to be in chemical equilibrium. The results obtained demonstrate how variations in various properties influence the calculations and how recent modifications in probe forebody heatshield design influence the heating and mass-loss conditions for Jupiter entry. The heatshield mass-loss rates are shown to decrease when the new radiative and thermodynamic property values are used as well as when the nose bluntness is reduced. Also, the inclusion of a finite surface reflectivity reduces the mass loss whereas spallation increases the mass loss by about 6 percent. Finally, the heating, mass-loss, and flowfield structure characteristics are described for a 335-kg probe as it enters the atmosphere of Jupiter.

Moss, J. N.↗

NASA NTRS1972

The ablation of graphitic materials in the sublimation regime.

A large variety of graphitic materials have been tested in an arc heated air stream at a surface pressure of 4.3 atm and a nominal surface temperature of 3925 K. Included were commercial and developmental grades of artificial graphites, both two and three dimensional carbon-carbon composites, composites seeded with refractory compounds, and several special materials such as pyrolytic graphite, mesophase graphite, glassy carbon, and natural graphite. ATJ graphite was used as a control material. Except for the seeded materials which had poor performance, the mass loss rate for all the man-made graphitic materials fell within the range of 17 per cent less to 30 per cent more than the rate for ATJ. Thus it is concluded that wide variations in constituents, processing, fabrication and structure have relatively little effect on the ablation performance of graphitic materials, at least under the conditions of the present tests. Particulate mass loss was observed for all the materials tested and is the dominant mechanism for mass removal at the present test conditions. It is suggested that this mechanism results from physical failure, primarily by compressive thermal stress.

Lundell, J. H.↗

NASA NTRS1979

Solar wind sputtering effects in the Martian atmosphere

A Monte Carlo simulation of the sputtering of the upper atmosphere of Mars by the solar wind was performed. The calculated sputtering yields imply loss rates (molecules/cm square - sec escaping the planet) for carbon dioxide, carbon, and oxygen of R(CO2) = 2.6 X 1000000/cm square - sec, R(C) = 6.6 X 1000000/cm square - sec, and R(O) = 7.7 X 1000000/cm - sec. The total mass loss by sputtering is only about 10% of that due to chemical and photo-chemical processes, but sputtering provides a major exospheric sink for carbon. The erosion process described here preferentially removes the lighter components of the atmosphere. Calculations based on a Monte Carlo simulation suggest that for a model atmosphere, 97% of the N2 and 33% of the CO2 originally present may have been sputtered away over 4.5 X 10 to the 9th power y. In the same length of time the (15)N/(14)N isotopic ratio for the bulk atmosphere would have increased by a factor 1.7.

Watson, C. C.↗

NASA NTRS1987

Comparison of two procedures for predicting rocket engine nozzle performance

Two nozzle performance prediction procedures which are based on the standardized JANNAF methodology are presented and compared for four rocket engine nozzles. The first procedure required operator intercedence to transfer data between the individual performance programs. The second procedure is more automated in that all necessary programs are collected into a single computer code, thereby eliminating the need for data reformatting. Results from both procedures show similar trends but quantitative differences. Agreement was best in the predictions of specific impulse and local skin friction coefficient. Other compared quantities include characteristic velocity, thrust coefficient, thrust decrement, boundary layer displacement thickness, momentum thickness, and heat loss rate to the wall. Effects of wall temperature profile used as an input to the programs was investigated by running three wall temperature profiles. It was found that this change greatly affected the boundary layer displacement thickness and heat loss to the wall. The other quantities, however, were not drastically affected by the wall temperature profile change.

Davidian, Kenneth J.↗

NASA NTRS1987

Comparison of two procedures for predicting rocket engine nozzle performance

Davidian, Kenneth J.↗

NASA NTRS2000

Microphysical Modelling of Polar Stratospheric Clouds During the 1999-2000 Winter

The evolution of the 1999-2000 Arctic winter has been examined using a microphysical/photochemical model run along diabatic trajectories. A large number of trajectories have been generated, filling the vortex throughout the region of polar stratospheric cloud (PSC) formation, and extending from November until the vortex breakup, in order to provide representative sampling of the evolution of PSCs and their effect on stratospheric chemistry. The 1999-2000 winter was particularly cold, allowing extensive PSC formation. Many trajectories have ten-day periods continuously below the Type I PSC threshold; significant periods of Type II PSCs are also indicated. The model has been used to test the extent and severity of denitrification and dehydration predicted using a range of different microphysical schemes. Scenarios in which freezing only occurs below the ice frost point (causing explicit coupling of denitrification and dehydration) have been tested, as well as scenarios with partial freezing at warmer temperatures (in which denitrification can occur independently of dehydration). The sensitivity to parameters such as aerosol freezing rates and heterogeneous freezing have been explored. Several scenarios cause sufficient denitrification to affect chlorine partitioning, and in turn, model-predicted ozone depletion, demonstrating that an improved understanding of the microphysics responsible for denitrification is necessary for understanding ozone loss rates.

Drdla, Katja↗

NASA NTRS1981

Significance of turbulence and transition location on radiative heating with ablation injection

This paper presents forebody flowfield solutions for Jupiter entry conditions where the ablation injection rate is coupled with the surface heating rate. The calculations are made with a time-dependent viscous-shock-layer analysis where the flow is assumed to be in chemical equilibrium. Both laminar and turbulent solutions are presented to describe the impact of turbulence on surface mass loss rates for flow conditions where the heating is due primarily to radiation. Results are also presented where the transition location to turbulent flow is arbitrarily varied. Results show that the radiative heating rate values based on several downstream transition locations adjust quickly to the corresponding values based on transition near the stagnation point.

Moss, J. N.↗

NASA NTRS1976

On the physical interpretation of the cosmic-ray transport equations

It is pointed out that an earlier paper (Jokipii and Parker, 1967) had discussed in detail the question of the interpretation of the energy-change terms in the general equation for cosmic-ray transport in the solar wind, so that no need exists to reassess the physical interpretation, as urged by Gleeson and Webb (1974). The question concerns the expression for the adiabatic deceleration, which is 'replaced' by an expression for the mean rate of change of momentum of fast particles. It is pointed out that these two expressions represent two essentially different quantities. The adiabatic deceleration refers to the mean rate loss of kinetic energy of an individual particle as a result of the expansion of the gas and magnetic field of the wind. This parameter can in no way depend on the gradient of the fast particle density, as does the mean rate of change of momentum of the fast particles.

Jokipii, J. R.↗

NASA NTRS2001

Our Sun V: A Bright Young Sun Consistent with Helioseismology and Warm Temperatures on Ancient Earth and Mars

The relatively warm temperatures required on early Earth and Mars have been difficult to account for with warming from greenhouse gases. A slightly more massive young Sun would be brighter than predicted by the standard solar model, simultaneously resolving this problem for both Earth and Mars. We computed high-precision solar models with seven initial masses, from Mi = 1.01 to 1.07 solar mass - the latter being the maximum permitted if the early Earth is not to lose its water via a moist greenhouse effect. The relatively modest early mass loss that is required remains consistent with observational limits on mass loss from young stars and with estimates of the past solar wind obtained from lunar rocks. We considered three types of mass loss rates: (1) a reasonable choice of a simple exponential decline, (2) an extreme step-function case that gives the maximum effect consistent with observations, and (3) the radical case of a linear decline which is inconsistent with the solar wind mass loss estimates from lunar rocks. Our computations demonstrated that mass loss leaves a fingerprint oil the Sun's internal structure large enough to be detectable with helioseismic observations. All of our mass-losing solar models were consistent with the helioseismic observations; in fact, our preferred mass-losing cases were in marginally better agreement with the helioseismology than the standard solar model was, although this difference was smaller than the effects of other uncertainties in the input physics and in the solar composition. Mass loss has only a relatively minor effect on the predicted lithium depletion; the major portion of the solar lithium depletion must still be due to rotational mixing. Thus the modest mass loss cases considered here cannot be ruled out by observed lithium depletions. For the three mass loss types considered, the preferred initial masses were 1.07 solar mass for the exponential case and 1.04 solar mass for the step-function and linear cases; all of these provided high enough solar fluxes at Mars 3.8 Gyr ago to be consistent with the existence of liquid water. For a more massive early Sun, the planets would have had to be closer to the young Sun in order to end up in their present orbits; the orbital radii of the planets would vary inversely with the solar mass. Both of these effects contribute to the fact that the early solar flux at the planets would have been considerably higher than that of the standard solar model at that time. In fact, the 1.07 solar mass exponential case has a flux at birth 5% higher than the present solar flux, while the radical 1.04 solar mass linear case has a nearly constant flux over the first 3 Gyr only about 10% lower than at present. The early solar evolution would be in the opposite direction in the H-R diagram to that of the standard Sun.

Sackmann, I.-Juliana↗

NASA NTRS2001

An Assessment of the Ozone Loss During the 1999-2000 SOLVE Arctic Campaign

Ozone observations from ozonesondes, the lidars aboard the DC-8, in situ ozone measurements from the ER-2, and satellite ozone measurements from Polar Ozone and Aerosol Measurement III (POAM) were used to assess ozone loss during the Sage III Ozone Loss and Validation Experiment (SOLVE) 1999-2000 Arctic campaign. Two methods of analysis were used. In the first method a simple regression analysis is performed on the ozonesonde and POAM measurements within the vortex. In the second method, the ozone measurements from all available ozone data were injected into a free running diabatic trajectory model and carried forward in time from December 1 to March 15. Vortex ozone loss was then estimated by comparing the ozone values of those parcels initiated early in the campaign with those parcels injected later in the campaign. Despite the variety of observational techniques used during SOLVE, the measurements provide a fairly consistent picture. Over the whole vortex, the largest ozone loss occurs between 550 and 400 K potential temperatures (approximately 23-16 km) with over 1.5 ppmv lost by March 15, the end of the SOLVE mission period. An ozone loss rate of 0.04-0.05 ppmv/day was computed for March 15. Ozonesondes launched after March 15 suggest that an additional 0.5 ppmv or more ozone was lost between March 15 and April 1. The small disagreement between ozonesonde and POAM analysis of January ozone loss is found to be due to biases in vortex sampling. POAM makes most of its solar occultation measurements at the vortex edge during January 2000 which bias samples toward air parcels that have been exposed to sunlight and likely do experience ozone loss. Ozonesonde measurements and the trajectory technique use observations that are more distributed within the interior of the vortex. Thus the regression analysis of the POAM measurements tends to overestimate mid-winter vortex ozone loss. Finally, our loss calculations are broadly consistent with other loss computations using ER-2 tracer data and MLS satellite data, but we find no evidence for the 1992 high mid-January loss reported using the Match technique.

Schoeberl, Mark R.↗

NASA NTRS2012

Solar-Storm/Lunar Atmosphere Model (SSLAM): An Overview of the Effort and Description of the Driving Storm Environment

On 29 April 1998, a coronal mass ejection (CME) was emitted from the Sun that had a significant impact on bodies located at 1 AU. The terrestrial magnetosphere did indeed become more electrically active during the storm passage but an obvious question is the effect of such a storm on an exposed rocky body like our Moon. The solar-storm/lunar atmosphere modeling effort (SSLAM) brings together surface interactions, exosphere, plasma, and surface charging models all run with a common driver - the solar storm and CME passage occurring from 1-4 May 1998. We present herein an expanded discussion on the solar driver during the 1-4 May 1998 period that included the passage of an intense coronal mass ejection (CME) that had> 10 times the solar wind density and had a compositional component of He++ that exceeded 20%. We also provide a very brief overview oflhe SSLAM system layout and overarching results. One primary result is that the CME driver plasma can greatly increase the exospheric content via sputtering, with total mass loss rates that approach 1 kg/s during the 2-day CME passage. By analogy, we suggest that CME-related sputtering increases might also be expected during a CME passage by a near-earth asteroid or at the Mars exobase, resulting in an enhanced loss of material.

Farrell, W. M.↗

NASA NTRS1987

An evaluation of candidate oxidation resistant materials

Ground based testing of materials considered for Kapton solar array blanket protection, graphite epoxy structural member protection, and high temperature radiators was performed in an RF plasma asher. Ashing rates for Kapton were correlated with rates measured on STS-8 to determine the exposure time equivalent to one year in low Earth orbit (LEO) at a constant density space station orbital flux. Protective coatings on Kapton from Tekmat, Andus Corporation, and LeRC were evaluated in the plasma asher and mass loss rates per unit area were measured for each sample. All samples evaluated provided some protection to the underlying surface but ion beam sputter deposited samples of SiO2 and SiO2 with 8% polytetrafluoroethylene (PTFE) showed no evidence of degradation after 47 hours of exposure. Mica paint was evaluated as a protective coating for graphite epoxy structural members. Mica appears to be resistant to attack by atomic oxygen but only offers some limited protection as a paint because the paint vehicles evaluated to date were not resistant to atomic oxygen. Four materials were selected for evaluation as candidate radiator materials: stainless steel, copper, niobium-1% zirconium, and titanium-6% aluminum-4% vanadium. These materials were surface textured by various means to improve their emittance. Emittances as high as 0.93 at 2.5 microns for stainless steel and 0.89 at 2.5 microns for Nb-1 Zr were obtained from surface texturing. There were no significant changes in emittance after asher exposure.

Rutledge, Sharon↗

NASA NTRS1988

Formation of the Antarctic ozone hole by the ClO dimer mechanism

New measurements of the low-altitude ClO profile, made during September 1987, are presented along with detailed observations of ozone depletion over McMurdo Station, Antarctica during the same period. The results show that both the rate and altitude range of ozone depletion can be quantitatively accounted for by a mechanism in which the ClO dimer is the important intermediary in the catalytic destruction of ozone. An alternative bromine mechanism appears capable of contributing only 5-15 percent to the ozone loss rate.

Barrett, J. W.↗