Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETOHYDRODYNAMICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Magnetohydrodynamic generator experimental studies

The results for an experimental study of a one wavelength MHD induction generator operating on a liquid flow are presented. First the design philosophy and the experimental generator design are summarized, including a description of the flow loop and instrumentation. Next a Fourier series method of treating the fact that the magnetic flux density produced by the stator is not a pure traveling sinusoid is described and some results summarized. This approach appears to be of interest after revisions are made, but the initial results are not accurate. Finally, some of the experimental data is summarized for various methods of excitation.

Pierson, E. S.↗
NASA NTRS1972

Hall current effects in the Lewis magnetohydrodynamic generator.

Data obtained in the Lewis MHD generator are compared with theoretical values calculated using the Dzung (1966) theory. The generator is operated with cesium seeded argon as the working fluid. The gas temperature varies from 1800 to 2100 K, the gas pressure from 19 to 22 N/sq cm, the Mach number from .3 to .5, and the magnetic field strength from .2 to 1.6 tesla. The analysis indicates that there is incomplete seed vaporization and that Hall current shorting paths (through the working fluid to ground at both the entrance and exit of the channel) are limiting generator performance.

Nichols, L. D.↗
NASA NTRS1973

Impinging jet separators for liquid metal magnetohydrodynamic power cycles

In many liquid metal MHD power, cycles, it is necessary to separate the phases of a high-speed liquid-gas flow. The usual method is to impinge the jet at a glancing angle against a solid surface. These surface separators achieve good separation of the two phases at a cost of a large velocity loss due to friction at the separator surface. This report deals with attempts to greatly reduce the friction loss by impinging two jets against each other. In the crude impinging jet separators tested to date, friction losses were greatly reduced, but the separation of the two phases was found to be much poorer than that achievable with surface separators. Analyses are presented which show many lines of attack (mainly changes in separator geometry) which should yield much better separation for impinging jet separators).

Bogdanoff, D. W.↗
NASA NTRS1974

Light bulb heat exchanger for magnetohydrodynamic generator applications - Preliminary evaluation

The light-bulb heat-exchanger concept is investigated as a possible means of using a combustion heat source to supply energy to an inert gas MHD power generator system. In this concept, combustion gases flow through a central passage which consists of a duct with transparent walls through which heat is transferred by radiation to a radiation receiver which in turn heats the inert gas by convection. The effects of combustion-gas emissivity, transparent-wall-transmissivity, radiation-receiver emissivity, and the use of fins in the inert gas coolant passage are studied. The results indicate that inert gas outlet temperatures of 2500 K are possible for combustion temperatures of 3200 K and that sufficient energy can be transferred from the combustion gas to reduce its temperature to approximately 2000 K. At this temperature more conventional heat exchangers can be used.

Smith, J. M.↗
NASA NTRS1976

Magnetohydrodynamic and gasdynamic aspects of solar-wind flow around terrestrial planets: A critical review

Problems in space physics are discussed whose models, in simplified form, reduce to a supersonic flow scheme with a detached shock wave, namely: (1) solar wind interaction with an intrinsic planetary magnetic field; (2) solar wind interaction with the ionized component of the atmosphere of a comet; and (3) solar wind interaction with the ionosphere of a planet which does not possess its own magnetic field. The numerical study of the above problems is performed with the use of magnetogasdynamic equations for an ideal single fluid model. From the physical veiwpoint, the problems are solved in terms of as simple phenomena as possible; the principal objective is to make recently developed methods of numerical analysis of mixed flows applicable to space physics problems.

Spreiter, J. R.↗
NASA NTRS1977

Velocity and temperature distributions of coal-slag layers on magnetohydrodynamic generators walls

Approximate analytical expressions are derived for the velocity and temperature distributions in steady state coal slag deposits flowing over MHD generator walls. Effects of slag condensation and Joule heating are included in the analysis. The transport conditions and the slag temperature at the slag-gas interface are taken to be known parameters in the formulation. They are assumed to have been predetermined either experimentally or from the slag properties and the gas dynamic calculations of the free stream flow. The analysis assumes a power law velocity profile for the slag and accounts for the coupling between the energy and momentum conservation equations. Comparisons are made with the more exact numerical solutions to verify the accuracy of the results.

Pian, C. C. P.↗
NASA NTRS1977

Estimates of Optimal Operating Conditions for Hydrogen-Oxygen Cesium-Seeded Magnetohydrodynamic Power Generator

The value of percent seed, oxygen to fuel ratio, combustion pressure, Mach number, and magnetic field strength which maximize either the electrical conductivity or power density at the entrance of an MHD power generator was obtained. The working fluid is the combustion product of H2 and O2 seeded with CsOH. The ideal theoretical segmented Faraday generator along with an empirical form found from correlating the data of many experimenters working with generators of different sizes, electrode configurations, and working fluids, are investigated. The conductivity and power densities optimize at a seed fraction of 3.5 mole percent and an oxygen to hydrogen weight ratio of 7.5. The optimum values of combustion pressure and Mach number depend on the operating magnetic field strength.

Smith, J. M.↗
NASA NTRS1977

Design study of superconducting magnets for a combustion magnetohydrodynamic (MHD) generator

Design trade off studies for 13 different superconducting magnet systems were carried out. Based on these results, preliminary design characteristics were prepared for several superconducting magnet systems suitable for use with a combustion driven MHD generator. Each magnet generates a field level of 8 T in a volume 1.524 m (60 in.) long with a cross section 0.254 m x 0.254 m (10 in. x 10 in.) at the inlet and 0.406 m x .406 m (16 in. x 16 in.) at the outlet. The first design involves a racetrack coil geometry intended for operation at 4.2 K; the second design uses a racetrack geometry at 2.0 K; and the third design utilizes a rectangular saddle geometry at 4.2 K. Each case was oriented differently in terms of MHD channel axis and main field direction relative to gravity in order to evaluate fabrication ease. All cases were designed such that the system could be disassembled to allow for alteration of field gradient in the MHD channel by changing the angle between coils. Preliminary design characteristics and assembly drawings were generated for each case.

Thome, R. J.↗
NASA NTRS1976

Liquid-metal magnetohydrodynamic system evaluation

The present study emphasizes a direct coal-fired design using a bubbly two-component flow of sodium and argon in the MHD generator and a Rankine steam-bottoming plant. Two basic cycles were studied, corresponding to argon temperatures of 922 and 1089 K at the duct inlet. The MHD duct system consisted of multiple ducts arranged in clusters and separated by iron magnet pole pieces. The ducts, each with an output of about 100 MW, were parallel to the flow, but were connected in series electrically to provide a higher MHD voltage. With channel efficiencies of 80%, a pump efficiency of 90%, and a 45% efficient steam-bottoming plant, the overall efficiency of the 1089 K liquid-metal MHD power plant was 43%.

Holman, R. R.↗
NASA NTRS1977

Dissipative, forced turbulence in two-dimensional magnetohydrodynamics

The equations of motion of a turbulent two-dimensional MHD flow are solved in the presence of finite viscosity and resistivity for the case when external mechanical and/or magnetic forces act on the fluid, the goal of the study being to verify the existence of a MHD dynamo effect which is represented by a substantial back-transfer of mean square vector potential to the longest allowed Fourier wavelengths. The regime explored is that for which the mechanical and magnetic Reynolds numbers are in the range 100 to 1000. It is concluded that mechanical forcing terms alone cannot lead to dynamo action, but that dynamo action can result from either magnetic forcing terms or from both mechanical and magnetic forcing terms simultaneously.

Fyfe, D.↗
NASA NTRS1978

Magnetohydrodynamic simulation of coronal mass ejections into the solar wind

A state of the art fluid continuum technique to describe the MHD transient respose of the corona below 10 solar radii during two well observed events (flares on 21 August 1973 and 5 September 1973) is reviewed. It is concluded that the computer simulation should be subjected to in situ verification of as many of its initial assumptions as possible. Its ability to provide a rational basis for physical understanding of mass ejections suggests its use as one of the tools used in the planning and analysis of such encounter missions.

Dryer, M.↗
NASA NTRS1978

Magnetohydrodynamics of atmospheric transients. I - Basic results of two-dimensional plane analyses

The dynamic behavior of transients in a stratified atmosphere in the presence of a magnetic field is investigated with the two-dimensional plane formulation, i.e., the formulation in which variations of the flow and magnetic field are confined within a plane. It is pointed out that, in the plane formulation, the noncompressible transverse waves (often called the Alfven waves) are excluded. The compressible responses of the atmosphere are then examined with a temperature perturbation (simulating a sudden local release of energy by a flare) as functions of the configuration of magnetic field and field strength. It is shown that (1) in the open (mostly radial) magnetic field, the propagation of 'bubble-like' density enhancements, the coronal transients, result; while (2) in the closed (mostly azimuthal) field, the density enhancement forms a pair of 'horns' near the foot points of field lines similar to that often observed by coronagraphs after flares. Discussions in interpreting the results in terms of the anisotropic propagation of the fast and slow waves (or shocks) are presented together with consideration of possible consequences with the inclusion of the transverse waves.

Nakagawa, Y.↗
NASA NTRS1978

Magnetohydrodynamics of atmospheric transients. II - Two-dimensional numerical results for a model solar corona

A systematic study of dynamic response of the inner solar corona is made within the context of two-dimensional, time-dependent plane hydromagnetics. The governing equations are written in r-phi coordinates (i.e., in the solar equatorial plane), and numerical solutions are obtained by introducing an impulsive temperature enhancement within a rectangular region (i.e., 'box') in an initially isothermal corona in magnetohydrostatic equilibrium. Effects of the magnetic field configuration are illustrated for initially open (radial) and closed (azimuthal) magnetic fields by comparison with the nonmagnetic response. The channeling or blocking effects by the magnetic fields on the mass motion of solar plasma as the consequence of the evolution of fast and slow mode MHD shock waves are demonstrated. Some physically significant applications of the results, useful for the interpretation of observations, are discussed. It is noted, for example, that coronal transients observed in white light probably occur within essentially radial field topologies.

Wu, S. T.↗
NASA NTRS1978

Three-dimensional magnetohydrodynamic turbulence in cylindrical geometry

A theory is developed in which a perfectly conducting cylindrical wall is used to describe incompressible MHD turbulence. Dynamic equations of incompressible MHD and its associated fields are expanded in a system of vector eigenfunctions of the curl. The total energy, magnetic helicity, and cross helicity have simple quadratic expressions in the expansion coefficients. The invariants are temporally constant for a truncation at a large, but finite, number of coefficients. The invariants are used to construct canonical distributions. It is noted that for all initial conditions, including quiescent ones, the mean-square velocity fields have finite values. The stability problem is transformed into a search for values of the integral variants which minimize the mean-square velocity fields. This leads to an extremal helicity principle.

Montgomery, D.↗
NASA NTRS1978

Magnetohydrodynamic models of coronal transients in the meridional plane. I - The effect of the magnetic field

The propagation of coronal transients through the lower corona in the meridional plane is studied on the basis of numerical solutions of the time-dependent MHD equations of motion. The importance of the topology of the initial coronal magnetic field is demonstrated by considering two configurations: one which is essentially radial (open), and another which is essentially parallel to the solar surface (closed). The effect of coronal field magnitude is investigated by using values for the beta parameter of 1 and 0.1 at the coronal base. The consequences of including radiative losses and of varying the polytropic index are also considered. The solar event is simulated by a step-function increase in the pressure at the base of an initially hydrostatic atmosphere by a factor of 5, lasting for a period of 5 min.

Steinolfson, R. S.↗
NASA NTRS1978

Design study of superconducting magnets for a combustion magnetohydrodynamic /MHD/ generator

Results are presented for a trade-off and preliminary design study on concepts of a superconducting magnet system for a combustion MHD generator test facility. The main objective is to gain insight into the magnitude of the project in terms of physical characteristics and cost. The net result of a first-phase evaluation of attractive design alternatives is to concentrate subsequent efforts on (1) a racetrack coil geometry with an operating temperature of 4.2 K, (2) a racetrack coil geometry with an operating temperature of 2.0 K, and (3) a rectangular saddle coil geometry with an operating temperature of 4.2 K. All three systems are to produce 8 T, and use NbTi superconductor and iron for field enhancement. Design characteristics of the three systems are described. It is shown that the racetrack and rectangular saddle coil geometries seem most suitable for this application, the former because of its simplicity and the latter because of its efficient use of material. Advantages of the rectangular saddle over the two other systems are stressed.

Thome, R. J.↗