Search NASA⌕ Search

SEARCH · Search NASA

Results for “Maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Use of high spectral resolution airborne visible/infrared imaging spectrometer data for geologic mapping: An overview

Specific examples of the use of AVIRIS (Airborne Visible/Infrared Imaging Spectrometer) high spectral resolution data for mapping, alteration related to ore deposition and to hydrocarbon seepage, and alluvial fans are presented. Correction for atmospheric effects was performed using flat field correction, log residuals, and radiative transfer modeling. Minerals of interest (alunite, kaolinite, gypsum, carbonate iron oxides, etc.) were mapped based upon the wavelength position, depth and width of characteristic absorption features. Results were checked by comparing to existing maps, results from other sensors (Thematic Mapper (TM) and TIMS (Thermal Infrared Multispectral Scanner)), and laboratory spectra of samples collected in the field. Alteration minerals were identified and mapped. The signal to noise ratio of acquired AVIRIS data, long to 2.0 microns, was insufficient to map minerals of interest.

Carrere, Veronique↗
NASA NTRS1992

Execution models for mapping programs onto distributed memory parallel computers

The problem of exploiting the parallelism available in a program to efficiently employ the resources of the target machine is addressed. The problem is discussed in the context of building a mapping compiler for a distributed memory parallel machine. The paper describes using execution models to drive the process of mapping a program in the most efficient way onto a particular machine. Through analysis of the execution models for several mapping techniques for one class of programs, we show that the selection of the best technique for a particular program instance can make a significant difference in performance. On the other hand, the results of benchmarks from an implementation of a mapping compiler show that our execution models are accurate enough to select the best mapping technique for a given program.

Sussman, Alan↗
NASA NTRS1992

The geologic mapping of Venus using C-1 format: Sheets 75N254, 60N263

The results of geologic mapping of Venus, produced on the base of Magellan images, are presented. We submit two C-1 format geologic maps with the appropriate legend. The mapping territory was taken from Venera 15 and 16 missions and geologic maps were composed. Magellan images allow us to divide some types of the plains units to determine the lava flow direction and to map with better accuracy.

Shalimov, I. V.↗
NASA NTRS1992

Polynomial approximation of Poincare maps for Hamiltonian system

Different methods are proposed and tested for transforming a non-linear differential system, and more particularly a Hamiltonian one, into a map without integrating the whole orbit as in the well-known Poincare return map technique. We construct piecewise polynomial maps by coarse-graining the phase-space surface of section into parallelograms and using either only values of the Poincare maps at the vertices or also the gradient information at the nearest neighbors to define a polynomial approximation within each cell. The numerical experiments are in good agreement with both the real symplectic and Poincare maps.

Froeschle, Claude↗
NASA NTRS1992

Effects of habitat map generalization in biodiversity assessment

Species richness is being mapped as part of an inventory of biological diversity in California (i.e., gap analysis). Species distributions are modeled with a GIS on the basis of maps of each species' preferred habitats. Species richness is then tallied in equal-area sampling units. A GIS sensitivity analysis examined the effects of the level of generalization of the habitat map on the predicted distribution of species richness in the southern Sierra Nevada. As the habitat map was generalized, the number of habitat types mapped within grid cells tended to decrease with a corresponding decline in numbers of species predicted. Further, the ranking of grid cells in order of predicted numbers of species changed dramatically between levels of generalization. Areas predicted to be of greatest conservation value on the basis of species richness may therefore be sensitive to GIS data resolution.

Stoms, David M.↗
NASA NTRS1992

Using qualitative maps to direct reactive robots

The principal advantage of mobile robots is that they are able to go to specific locations to perform useful tasks rather than have the tasks brought to them. It is important therefore that the robot be used to reach desired locations efficiently and reliably. A mobile robot whose environment extends significantly beyond its sensory horizon must maintain a representation of the environment, a map, in order to attain these efficiency and reliability requirements. We believe that qualitative mapping methods provide useful and robust representation schemes and that such maps may be used to direct the actions of a reactively controlled robot. In this paper we describe our experience in employing qualitative maps to direct, through the selection of desired control strategies, a reactive-behavior based robot. This mapping capability represents the development of one aspect of a successful deliberative/reactive hybrid control architecture.

Bertin, Randolph↗
NASA NTRS1993

Comparative mapping of Pluto's sub-Charon hemisphere - Three least squares models based on mutual event lightcurves

Observations of Charon transits are used here to derive preliminary maps of Pluto's sub-Charon hemisphere. Three models are used to describe the brightness of Pluto's surface as functions of latitude and longitude. Mapping results are presented using spherical harmonic functions, polynomial functions, and finite elements. A smoothing algorithm applied to the maps is described and the validity and resolution of the maps is tested by reconstruction from synthetic data. A preliminary finding from the maps is that the south polar region has the highest albedo of any location on the planet.

Young, Eliot F.↗
NASA NTRS1992

Multispectral thermal infrared mapping of the 1 October 1988 Kupaianaha flow field, Kilauea volcano, Hawaii

Multispectral thermal infrared radiance measurements of the Kupaianaha flow field were acquired with the NASA airborne Thermal Infrared Multispectral Scanner (TIMS) on the morning of 1 October 1988. The TIMS data were used to map both the temperature and emissivity of the surface of the flow field. The temperature map depicted the underground storage and transport of lava. The presence of molten lava in a tube or tumulus resulted in surface temperatures that were at least 10 C above ambient. The temperature map also clearly defined the boundaries of hydrothermal plumes which resulted from the entry of lava into the ocean. The emissivity map revealed the boundaries between individual flow units within the Kupaianaha field. Distinct spectral anomalies, indicative of silica-rich surface materials, were mapped near fumaroles and ocean entry sites. This apparent enrichment in silica may have resulted from an acid-induced leaching of cations from the surfaces of glassy flows.

Realmuto, Vincent J.↗
NASA NTRS1993

Topographic mapping using a monopulse SAR system

Terrain height variations in mountainous areas cause two problems in the radiometric correction of SAR images: the first being that the wrong elevation angle may be used in correcting for the radiometric variation of the antenna pattern; the second that the local incidence angle used in correcting the projection of the pixel area from slant range to ground range coordinates may vary from that given by the flat earth assumption. We propose a novel design of a SAR system which exploits the monopulse principle to determine the elevation angle and thus the height at the different parts of the image. The key element of such a phase monopulse system is an antenna, which can be divided into a lower and upper half in elevation using a monopulse comparator. In addition to the usual sum pattern, the elevation difference pattern can be generated by a -pi phase shift on one half of the antenna. From the ratios of images radiometrically modulated by the difference and sum antenna pattern in cross-track direction, we can derive the appropriate elevation angle at any point in the image. Together with the slant range we can calculate the height of the platform above this point using information on the antenna pointing and the platform attitude. This operation, repeated at many locations throughout the image, allows us to build up a topographic map of the height of the aircraft above each location. Inversion of this map, using the precisely determined aircraft altitude and the accurate flight path, leads to the actual topography of the imaged surface. The precise elevation of one point in the image could also be used to convert the height map to a topographic map. In this paper, we present design considerations for a corresponding airborne SAR system in X-Band and give estimates of the error due to system noise and azimuth ambiguities as well as the expected performance and precision in topographic mapping.

Zink, M.↗
NASA NTRS1992

Model-driven mapping onto distributed memory parallel computers

The author addresses the problem of exploiting the parallelism available in a program to efficiently employ the resources of the target machine in the context of building a mapping compiler for a distributed memory parallel machine. He demonstrates the effectiveness of using execution models to select the best mapping technique from among those available for a given program segment on a particular machine. Through analysis of the execution models for several mapping techniques for one class of programs on a linear processor array, it is shown that selecting the best technique for a particular program instance can make a significant difference in performance. On the other hand, the results of benchmarks from a mapping compiler for the Warp systolic array machine show that the execution models considered are accurate enough to select the best mapping technique for a given program.

Sussman, Alan↗
NASA NTRS1994

Evaluation of current tropospheric mapping functions by Deep Space Network very long baseline interferometry

To compare the validity of current algorithms that map zenith tropospheric delay to arbitrary elevation angles, 10 different tropospheric mapping functions are used to analyze the current data base of Deep Space Network Mark 3 intercontinental very long baseline interferometric (VLBI) data. This analysis serves as a stringent test because of the high proportion of low-elevation observations necessitated by the extremely long baselines. Postfit delay and delay-rate residuals are examined, as well as the scatter of baseline lengths about the time-linear model that characterizes tectonic motion. Among the functions that utilize surface meteorological data as input parameters, the Lanyi 1984 mapping shows the best performance both for residuals and baselines, through the 1985 Davis function is statistically nearly identical. The next best performance is shown by the recent function of Niell, which is based on an examination of global atmospheric characteristics as a function of season and uses no weather data at the time of the measurements. The Niell function shows a slight improvement in residuals relative to Lanyi, but also an increase in baseline scatter that is significant for the California-Spain baseline. Two variants of the Chao mapping function, as well as the Chao tables used with the interpolation algorithm employed in the Orbit Determination Program software, show substandard behavior for both VLBI residuals and baseline scatter. The length of the California-Australia baseline (10,600 km) in the VLBI solution can vary by as much as 5 to 10 cm for the 10 mapping functions.

Sovers, O. J.↗
NASA NTRS1993

Mapping and monitoring changes in vegetation communities of Jasper Ridge, CA, using spectral fractions derived from AVIRIS images

An important application of remote sensing is to map and monitor changes over large areas of the land surface. This is particularly significant with the current interest in monitoring vegetation communities. Most of traditional methods for mapping different types of plant communities are based upon statistical classification techniques (i.e., parallel piped, nearest-neighbor, etc.) applied to uncalibrated multispectral data. Classes from these techniques are typically difficult to interpret (particularly to a field ecologist/botanist). Also, classes derived for one image can be very different from those derived from another image of the same area, making interpretation of observed temporal changes nearly impossible. More recently, neural networks have been applied to classification. Neural network classification, based upon spectral matching, is weak in dealing with spectral mixtures (a condition prevalent in images of natural surfaces). Another approach to mapping vegetation communities is based on spectral mixture analysis, which can provide a consistent framework for image interpretation. Roberts et al. (1990) mapped vegetation using the band residuals from a simple mixing model (the same spectral endmembers applied to all image pixels). Sabol et al. (1992b) and Roberts et al. (1992) used different methods to apply the most appropriate spectral endmembers to each image pixel, thereby allowing mapping of vegetation based upon the the different endmember spectra. In this paper, we describe a new approach to classification of vegetation communities based upon the spectra fractions derived from spectral mixture analysis. This approach was applied to three 1992 AVIRIS images of Jasper Ridge, California to observe seasonal changes in surface composition.

Sabol, Donald E., Jr.↗
NASA NTRS1993

Geologic mapping using integrated AIRSAR, AVIRIS, and TIMS data

The multi-sensor aircraft campaign called the 'Geologic Remote Sensing Field Experiment' (GRSFE), conducted during 1989 in the southwestern United States, collected multiple airborne remote sensing data sets and associated field and laboratory measurements. The GRSFE airborne data sets used in this study include the airborne Synthetic Aperture Radar (AIRSAR), the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS), and the Thermal Infrared Multispectral Scanner (TIMS). Each sensor's unique characteristics were used for this study in a combined analysis scheme for geologic mapping. AIRSAR was used to map structures and landforms, AVIRIS was used to map mineralogy, and TIMS was used to map lithology. Visual data integration using IHS transforms and combined numerical analysis using derived geophysical and geologic parameters with 'multispectral' techniques resulted in improved geologic mapping over that possible using each data set individually.

Kruse, Fred A.↗
NASA NTRS1995

Regional mapping of forest canopy water content and biomass using AIRSAR images over BOREAS study area

In recent years, monitoring vegetation biomass over various climate zones has become the primary focus of several studies interested in assessing the role of the ecosystem responses to climate change and human activities. Airborne and spaceborne Synthetic Aperture Radar (SAR) systems provide a useful tool to directly estimate biomass due to its sensitivity to structural and moisture characteristics of vegetation canopies. Even though the sensitivity of SAR data to total aboveground biomass has been successfully demonstrated in many controlled experiments over boreal forests and forest plantations, so far, no biomass estimation algorithm has been developed. This is mainly due to the fact that the SAR data, even at lowest frequency (P-band) saturates at biomass levels of about 200 tons/ha, and the structure and moisture information in the SAR signal forces the estimation algorithm to be forest type dependent. In this paper, we discuss the development of a hybrid forest biomass algorithm which uses a SAR derived land cover map in conjunction with a forest backscatter model and an inversion algorithm to estimate forest canopy water content. It is shown that unlike the direct biomass estimation from SAR data, the estimation of water content does not depend on the seasonal and/or environmental conditions. The total aboveground biomass can then be derived from canopy water content for each type of forest by incorporating other ecological information. Preliminary results from this technique over several boreal forest stands indicate that (1) the forest biomass can be estimated with reasonable accuracy, and (2) the saturation level of the SAR signal can be enhanced by separating the crown and trunk biomass in the inversion algorithm. We have used the JPL AIRSAR data over BOREAS southern study area to test the algorithm and to generate regional scale water content and biomass maps. The results are compared with ground data and the sources of errors are discussed. Several SAR images in synoptic modes are used to generate the parameter maps. The maps are then combined to generate mosaic maps over the BOREAS modeling grid.

Saatchi, Sasan↗
NASA NTRS1993

Mapping small-scale vegetation changes in Mexico

This research attempts to map small-scale vegetation changes in Mexico. Forty-eight weeks of coarse resolution Advanced Very High Resolution Radiometer Normalized Difference Vegetation Index (NDVI), a digitized climax vegetation map, land cover samples from space shuttle photographs and actual vegetation samples were used as inputs. Principal components analyses and a clustering algorithm were applied to the NDVI data to generate a single layer that was stratified by the climax vegetation zones map. The purpose is to create a new layer that differentiates climax vegetation (hypothesized potential vegetation) from non-climax vegetation land covers. One of the keys to developing a present-day vegetation map was differentiating intrazone land covers based on the stratification; as great as 75% of the sampled land cover types differed from the climax vegetation. The present-day vegetation map achieved 80% classification accuracy when calculated from available ground reference data. About 55% of the temperate zones and 37% of the tropical zones were found to contain original climax vegetation. Most changes coincide with areas of major agricultural activity.

Turcotte, Kevin M.↗
NASA NTRS1995

An X-ray temperature map of Abell 754: A major merger

We present the first two-dimensional X-ray temperature map of the rich cluster of galaxies Abell 754. We also present an X-ray surface brightness map with improved spatial resolution and sensitivity compared with previous maps. Both the temperature map and the surface brightness map show that A754 is in the throes of a violent merger; it is probably far from hydrostatic equilibrium.

Henry, J. Patrick↗
NASA NTRS1994

Thermal and albedo mapping of the polar regions of Mars using Viking thermal mapper observations: 1. North polar region

We present the first maps of the apparent thermal inertia and albedo of the north polar region of Mars. The observations used to create these maps were acquired by the infrared thermal mapper (IRTM) instruments on the two Viking orbiters over a 50-day period in 1978 during the Martian early northern summer season. The maps cover the region from 60 deg N to the north pole at a spatial resolution of 1/2 deg of latitude. The analysis and interpretation of these maps is aided by the results of a one-dimensional radiative convective model, which is used to calculate diurnal variations in surface and atmospheric temperatures, and brightness temperatures at the top of the atmospphere for a wide range of assumptions concerning aerosol optical properties and aerosol optical depths. The results of these calculations show that the effects of the Martian atmosphere on remote determinations of surface thermal inertia are more significant than have been indicated in previous studies. The maps of apparent thermal inertia and albedo show a great deal of spatial structure that is well correlated with surface features.

Paige, David A.↗
NASA NTRS1995

Coronal synoptic temperature maps derived from the Fe XIV/Fe X intensity ratio

The large-scale temperature structure of the low corona is investigated using synoptic temperature maps, derived from the intensity ratio of the green (Fe XIV) and red (Fe X) coronal lines as observed at the National Solar Observatory/Sacramento Peak. This intensity ratio is sensitive to coronal plasma with temperatures in the range of 1-2 MK. The synoptic maps indicate an association between high coronal temperature and the large-scale magnetic field. A comparison with WSO 'source surface' synoptic maps shows that especially when the heliospheric current sheet is stable over several rotations, the large-scale high-temperature features follow the current sheet remarkably well. For recent Carrington rotations temperature maps have been constructed for various heights between 1.15 and 1.45 solar radii. For these maps the correspondence with the current sheet (calculated at 2.5 solar radii) improves with height. Deviations between temperature structure and magnetic structure appears to be largest when the magnetic structure changes rapidly from rotation to rotation.

Hick, P.↗