SEARCH · Search NASA

Results for “New Observing System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Resolved resonance region evaluations of n+ 206,207,208 Pb for fast spectrum applications

Resolved resonance region evaluations of the major isotopes of natural lead, 206 Pb, 207 Pb, 208 Pb, have been per formed to support the development of Generation IV reactors. In this study, validation of nuclear data for lead fast reactors was performed with simulations of shielding benchmarks, integral critical benchmarks, and quasi-differential scattering measurements. Sensitivity analyses of these systems showed that elastic scattering reactions above 100 keV were the dominant reactions driving system performance. The resolved resonance regions (RRRs) of the lead isotopes extend past 100 keV, making the RRR an ideal starting point to evaluate lead cross sections. Since the R-matrix requires knowledge of bound, distant, and observed resonances, it was necessary to evaluate from 10 -5 eV up to the respective limit of the RRR. The 208 Pb RRR evaluation was extended to 1.5 MeV in order to obtain resonance parameters used to calculate new elastic scattering angular distributions up to 1.5 MeV. Resonance parameter uncertainties and covariance were generated using the R-matrix code SAMMY. The new RRR parameters show a direct improvement to the scattering kernel below 1.5 MeV which in turn greatly improves fast critical experiments over ENDF/B-VIII.0.

206Pb↗

DOE OSTI2022

Thickness-dependent spin bistable transitions in single-crystalline molecular 2D material

Abstract The advent of two-dimensional (2D) crystals has led to numerous scientific breakthroughs. Conventional 2D systems have in-plane covalent bonds and a weak out-of-plane van-der-Waals bond. Here we report a new type of 2D material composed of discrete magnetic molecules, where anisotropic van-der-Waals interactions bond the molecules into a 2D packing. Through mechanical exfoliation, we can obtain single-crystalline molecular monolayers, which can be readily integrated into other 2D systems. Optical spectroscopy suggests the few-layered molecules preserve the temperature-induced spin-crossover switching observed in the bulk form but show a drastic increase in thermal hysteresis unique to these thin 2D molecule assemblies. The trapping of spin bistability with decreasing layer number can arise from domain wall dynamics in reduced dimensions. Our results establish molecular solids with strong anisotropy of intermolecular interactions as precursors to a new class of 2D materials, affording possibilities to control molecular functionalities through substrate and interlayer interactions.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Characterization of self-magnetic pinch radiographic diode performance on RITS-6 at Sandia National Laboratories. II. Coupling between the inductive voltage adder and the SMP load

The self-magnetic pinch (SMP) diode is a type of radiographic diode used to generate an intense electron beam for radiographic applications. At Sandia National Laboratories, SMP was the diode load for the six-cavity radiographic integrated test stand inductive voltage adder (IVA) driver operated in a magnetically insulated transmission line (MITL). The MITL contributes a flow current in addition to the current generated within the diode itself. Extensive experiments with a MITL of 40Ω load impedance [T. J. Renk et al., Phys. Plasmas 29, 023105 (2022)] indicate that the additional flow current leads to results similar to what might be expected from a conventional high-voltage interface driver, where flow current is not present. However, when the MITL flow impedance was increased to 80 Ω, qualitatively different diode behavior was observed. This includes large retrapping waves suggestive of an initial coupling to low impedance as well as diode current decreasing with time even as the total current does not. A key observation is that the driver generates total current (flow + diode) consistent with the flow impedance of the MITL used. The case is made in this paper that the 80Ω MITL experiments detailed here can only be understood when the IVA-MITL-SMP diode is considered as a total system. Additionally, the constraint of fixed total current plus the relatively high flow impedance limits the ability of the diode (whether SMP or other type) to act as an independent load. An unexpected new result is that in tracking the behavior of the electron strike angle on the converter as a function of time, we observed that the conventional cIV x “Radiographic” radiation scaling (where x~2.2) begins to break down for voltages above 8 MV, and cubic scaling is required to recover accurate angle tracking.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

The aluminium-26 distribution in a cosmological simulation of a Milky Way-type Galaxy

Context . The 1.8 MeV γ -rays corresponding to the decay of the radioactive isotope 26 Al (with a half-life of 0.72 Myr ) have been observed by the SPI detector on the INTEGRAL spacecraft and extensively used as a tracer of star formation and current nucleosynthetic activity in the Milky Way Galaxy. Further information is encoded in the observation related to the higher 26 Al content found in regions of the Galaxy with the highest line-of-sight (LoS) velocity relative to an observer located in the Solar System. However, this feature remains unexplained. Aims . We ran a cosmological “zoom-in” chemodynamical simulation of a Milky Way-type galaxy, including the production and decays of radioactive nuclei in a fully self-consistent way. We then analyzed the results to follow the evolution of 26 Al throughout the lifetime of the simulated galaxy to provide a new method for interpreting the 26 Al observations. Methods . We included the massive star sources of 26 Al in the Galaxy and its radioactive decay into a state-of-the-art galactic chemical evolution model, coupled with cosmological growth and hydrodynamics. This approach allowed us to follow the spatial and temporal evolution of the 26 Al content in the simulated galaxy. Results . Our results are in agreement with the observations with respect to the fact that gas particles in the simulation with relatively higher 26 Al content also have the highest LoS velocities. On the other hand, gas particles with relatively lower 26 Al content (i.e., not bright enough to be observed) generally display the lowest LoS velocities. However, this result is not conclusive because the overall rotational velocity of our simulated galaxy is higher than that observed for cold CO gas in the Milky Way Galaxy. Furthermore, we found no significant correlation between gas temperature, rotational velocity, and 26 Al content at any given radius. We also found the presence of transient 26 Al-rich spots at low LoS velocities and we show that one such spot had been captured by the INTEGRAL/SPI data. Based on our model, we present a prediction for the detection of 1.8 MeV γ -rays by the future COSI mission. We find that according to our model, the new instrument will be able to observe similar 26 Al-emission patterns to those seen by INTEGRAL/SPI.

Wehmeyer, B. (ORCID:0009000254149292)↗

DOE OSTI2022

Advancing Geophysical Techniques to Image a Stratigraphic Hydrothermal Resource

Sedimentary-hosted geothermal energy systems are permeable structural, structural-stratigraphic, and/or stratigraphic horizons with sufficient temperature for direct use and/or electricity generation. Sedimentary-hosted (i.e., stratigraphic) geothermal reservoirs may be present in multiple locations across the central and eastern Great Basin of the USA, thereby constituting a potentially large base of untapped, economically accessible energy resources. Sandia National Laboratories has partnered with a multi disciplinary group of collaborators to evaluate a stratigraphic system in Steptoe Valley, Nevada using both established and novel geophysical imaging techniques. The goal of this study is to inform an optimized strategy for subsequent exploration and development of this resource and analogous ones. Building from prior Nevada Play Fairway Analysis (PFA), this team is primarily 1) collecting additional geophysical data, 2) employing novel joint geophysical inversion/modeling techniques to update existing 3D geologic models, and 3) integrating the geophysical results to produce a working, geologically constrained thermo-hydrological reservoir model. Prior PFA work highlights Steptoe Valley as a favorable resource basin that likely has both sedimentary and hydrothermal characteristics. However, there remains significant uncertainty on the nature and architecture of the resource(s) at depth, which increases the risk in exploratory drilling. Newly acquired gravity, magnetic, magnetotelluric, and controlled-source electromagnetic data products, in conjunction with new and preexisting geoscientific measurements and observations, are being integrated and evaluated for efficacy in understanding stratigraphic geothermal resources and mitigating exploration risk. Furthermore, the influence of hydrothermal activity on sedimentary-hosted reservoirs in favorable structural settings, and whether fault-controlled systems may locally enhance temperature and permeability in some deep stratigraphic reservoirs, will also be evaluated.

Geothermal, Sedimentary Heat, Geophysics, Seismic,↗

DOE OSTI2021

Superconducting RF Gun with High Current and the Capability to Generate Polarized Electron Beams

High-current low-emittance CW electron beams are indispensable for nuclear and high-energy physics fixed target and collider experiments, cooling high energy hadron beams, generating CW beams of monoenergetic X-rays (in FELs) and gamma-rays (in Compton sources). Polarization of electrons in these beams provides extra value by opening a new set of observables and frequently improving the data quality. We report on the upgrade of the unique and fully functional CW SRF 1.25 MeV SRF gun, built as part of the Coherent electron Cooling (CeC) project, which has demonstrated sustained CW operation with CsK2Sb photocathodes generating electron bunches with record-low transverse emittances and record-high bunch charge exceeding 10 nC. We propose to extend the capabilities of this system to high average current of 100 milliampere in two steps: increasing the current 30-fold at each step with the goal to demonstrate reliable long-term operation of the high-current low-emittance CW SRF guns. We also propose to test polarized GaAs photocathodes in the ultra-high vacuum (UHV) environment of the SRF gun, which has never been successfully demonstrated in RF accelerators.

43 PARTICLE ACCELERATORS↗

DOE OSTI2023

Evidence of Polaron Formation in Halide Perovskites via Carrier Effective Mass Measurements

Carrier effective mass is a central parameter in solid-state physics. It is a measure of the strength of the coupling between a carrier and excitations arising from its surrounding medium, and features prominently in transport and optical calculations. Experimental techniques employed to determine it are steady-state ones, and so are unable to detect any change in the effective mass after a strong perturbation to the system, e.g., strong optical excitation. By combining time-resolved terahertz spectroscopy and transient absorption spectroscopy, on a mixed-cation mixed-halide perovskite thin film, we observe a large and long-lived photoinduced enhancement of the carrier effective mass, and from it deduce a twofold increase of the carrier-phonon coupling constant, giving evidence of polaron formation. Our work demonstrates a new approach to track the strength and ultrafast lifetimes of photoinduced carrier-boson interactions down to picosecond timescales that can be applied to a wide range of solid-state systems.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Feedback and Oscillations: Constructing Feedback Systems for Root Cause Analysis of Oscillations in Power Grids

Dynamic phenomena linked to inverter-based resources (IBRs) have gained global attention. Several IBR-induced dynamics have caused bulk power system-connected wind or solar power plants to trip, and some have even led to widespread outages. In addition, many oscillations have been observed involving IBR power plants. In 2023, the IEEE Power & Energy Society (PES) IBR Subsynchronous Oscillations (SSO) task force published a journal article, “Real-World Subsynchronous Oscillation Events in Power Grids With High Penetrations of Inverter-Based Resources,” in which 19 IBR oscillation events were examined for their causation. Earlier in 2020, another PES task force article, “Definition and Classification of Power System Stability-Revisited & Extended,” authored by prominent academics, introduced converter-driven stability as a new category of stability. The international power grid industry community also took action by publishing the CIGRE Green Book, Power System Dynamic Modelling and Analysis in Evolving Networks (led by Babak Badrzadeh and Zia Emin) in 2024. In August 2024, the Energy Systems Integration Group (ESIG) released a practical guide led by Nick Miller, “Diagnosis and Mitigation of Observed Oscillations in IBR-Dominant Power System: A Practical Guide.” The goal of the guide is to assist practicing engineers in making initial judgments and conducting detailed analyses about oscillations. Finally, when addressing the classification of stability and oscillations, the guide emphasizes a causality-based taxonomy for grouping, such as voltage control-induced oscillations, synchronization-induced oscillations, and frequency or active power control-induced oscillations.

Fan, Lingling [Univ. of South Florida, Tampa, FL (↗

DOE OSTI2021

Exploring origins for correlations between flow harmonics and transverse momentum in small collision systems

High statistics data sets from experiments at the Relativistic Heavy Ion Collider (RHIC) and the Large Hadron Collider (LHC) with small and large collision species have enabled a wealth of new flow measurements, including the event-by-event correlation between observables. One exciting such observable $ρ(v^2_n, [p_T])$ gauges the correlation between the mean transverse momentum of particles in an event and the various flow coefficients (v n ) in the same event [P. Bozek, Phys. Rev. C 93, 044908 (2016)]. Recently it has been proposed that very low multiplicity events may be sensitive to initial-state glasma correlations [G. Giacalone, B. Schenke, and C. Shen, Phys. Rev. Lett. 125, 192301 (2020)] rather than flow-related dynamics. We find utilizing the ip-jazma framework that the color domain explanation for the glasma results are incomplete. We then explore predictions from pythia8, and the version for including nuclear collisions called pythia-angantyr, which have only nonflow correlations, and from the ampt model which has both nonflow and flow-type correlations. We find that pythia-angantyr has nonflow contributions to $ρ(v^2_n, [p_T])$ in p + O, p + Pb, and O + O collisions that are positive at low multiplicity and comparable to the glasma correlations. It is striking that in pythia8 in p + p collisions there is actually a sign change from positive to negative $ρ(v^2_n, [p_T])$ as a function of multiplicity. The ampt results match the experimental data general trends in Pb+Pb collisions at the LHC, except at low multiplicity where ampt has the opposite sign. In p + Pb collisions, ampt has the opposite sign from experimental data and we explore this within the context of parton geometry. Predictions for p + O, O + O, and Xe + Xe are also presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Carbon‐13 Hyperpolarization of α‐Ketocarboxylates with Parahydrogen in Reversible Exchange

Abstract Signal Amplification by Reversible Exchange (SABRE) is a relatively simple and fast hyperpolarization technique that has been used to hyperpolarize the α‐ketocarboxylate pyruvate, a central metabolite and the leading hyperpolarized MRI contrast agent. In this work, we show that SABRE can readily be extended to hyperpolarize 13 C nuclei at natural abundance on many other α‐ketocarboxylates. Hyperpolarization is observed and optimized on pyruvate (P 13C =17 %) and 2‐oxobutyrate (P 13C =25 %) with alkyl chains in the R‐group, oxaloacetate (P 13C =11 %) and alpha‐ketoglutarate (P 13C =13 %) with carboxylate moieties in the R group, and phenylpyruvate (P 13C =2 %) and phenylglyoxylate (P 13C =2 %) with phenyl rings in the R‐group. New catalytically active SABRE binding motifs of the substrates to the hyperpolarization transfer catalyst – particularly for oxaloacetate – are observed. We experimentally explore the connection between temperature and exchange rates for all of these SABRE systems and develop a theoretical kinetic model, which is used to fit the hyperpolarization build‐up and decay during SABRE activity.

McBride, Stephen J. [Department of Chemistry North↗

DOE OSTI2026

Emergence of complex-regular eutectic patterns in Al–Ge: Observations from correlative nano-imaging

Eutectic solidification exemplifies nonequilibrium pattern formation, making it a well-studied moving boundary problem. Yet the mechanisms behind the formation of complex-regular microstructures – particularly in highly anisotropic systems with a significant volume fraction of a faceted phase – remain poorly understood. Our understanding of such systems is made complicated by the nonlinear interface kinetics and unique growth dynamics characteristic of faceted phases. To address these challenges, we investigate a model Al–Ge eutectic system, where the faceted Ge phase constitutes a substantial volume fraction (~0.35) and where the two solid phases arrange into so-called “fishbone” or “feather” complex-regular patterns. Using synchrotron-based x-ray nano-imaging and nanotomography with high spatial resolution (22 nm per pixel), we capture in real-time the evolution of the solid–liquid interfaces and the resulting three-dimensional microstructures in this faceted/non-faceted eutectic system. By integrating these observations with electron backscattered diffraction, we elucidate the crystallographic biases on the solidification process and the mechanisms driving the formation of such complex-regular microstructures. These findings inform a new growth model for irregular eutectics in (near-)symmetrical phase diagrams, offering insight on advanced microstructural design and processing strategies. More broadly, we demonstrate how interfacial curvature is generated in irregular eutectic alloys and how it depends on the volume fraction of the faceted phase.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Potential-Dependent Adhesion Forces between dsDNA and Electroactive Surfaces

A promising approach to regulating the interactions between polyelectrolytes and materials is the use of electroactive surfaces that can change their charge state. However, common electroactive groups are too unstable to be practical for this purpose. Here we have performed a single molecule force spectroscopy study of the interactions between dsDNA and an 1,1'-biferrocenylene (BFD = bis(fulvalene)diiron)-terminated self-assembled monolayer surface that allows us to reversibly change the charge state. We found that the interaction force between DNA and the surface is correlated to the oxidation state of the BFD groups, which is conveniently controlled by the electrochemical potentials. We discovered that the electroactive SAM produces much stronger interaction forces than its nonelectroactive counterpart. A model based on the Grahame equation was able to quantitatively reproduce the experimentally observed relation between the applied potentials and adhesion forces. Our electroactive surface provides a model system for quantitative studies of the interactions between polyelectrolyte and charged surfaces in liquid. Furthermore, these insights may enable new opportunities for actively manipulating the binding, orientations, and conformations of polyelectrolytes for biosensing, nanomotors, and other applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Kondo interaction in FeTe and its potential role in the magnetic order

Finding d-electron heavy fermion states has been an important topic as the diversity in d-electron materials can lead to many exotic Kondo effect-related phenomena or new states of matter such as correlation-driven topological Kondo insulator. Yet, obtaining direct spectroscopic evidence for a d-electron heavy fermion system has been elusive to date. Here, we report the observation of Kondo lattice behavior in an antiferromagnetic metal, FeTe, via angle-resolved photoemission spectroscopy, scanning tunneling spectroscopy and transport property measurements. The Kondo lattice behavior is represented by the emergence of a sharp quasiparticle and Fano-type tunneling spectra at low temperatures. The transport property measurements confirm the low-temperature Fermi liquid behavior and reveal successive coherent-incoherent crossover upon increasing temperature. We interpret the Kondo lattice behavior as a result of hybridization between localized Fe 3d xy and itinerant Te 5p z orbitals. Our observations strongly suggest unusual cooperation between Kondo lattice behavior and long-range magnetic order.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Drag reduction and the Vogel exponent of a flexible beam in transient shear flows

Interactions between a flexible beam and a fluid in a channel are of great relevance to biological hairy surfaces, aquatic vegetation, marine life (e.g., fish gills), and many industrial systems alike. While steady state response of a beam to such flows is fairly well-explored, their behavior in the transient regime is not fully understood. Here, a series of numerical simulations are performed to study the laminar Couette flow of an incompressible viscous fluid past an elastic beam in a two-dimensional channel. The flexible beam is perpendicular to the direction of flow, and its base is fixed to the stationary bottom of the channel. We measure the evolution of the Vogel exponent, drag reduction, and reconfiguration number during the transient and steady-state response of the fluid–structure system for different geometrical and physical properties. Our benchmark shows a good agreement between numerical and experimental observations. Our results show that the system's steady-state response at different bulk-fluid velocities can be reproduced by investigating the shear flow response during the transient regime. We define a new variable that characterizes the evolution of the local velocity profile in the proximity of the free end of the beam and use that to characterize the transient-regime response. The analysis yields insight into the competing effects of elasticity of the beam and non-linear flow response.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2020

Implications of the search for optical counterparts during the second part of the Advanced LIGO’s and Advanced Virgo’s third observing run: lessons learned for future follow-up observations

ABSTRACT Joint multimessenger observations with gravitational waves and electromagnetic (EM) data offer new insights into the astrophysical studies of compact objects. The third Advanced LIGO and Advanced Virgo observing run began on 2019 April 1; during the 11 months of observation, there have been 14 compact binary systems candidates for which at least one component is potentially a neutron star. Although intensive follow-up campaigns involving tens of ground and space-based observatories searched for counterparts, no EM counterpart has been detected. Following on a previous study of the first six months of the campaign, we present in this paper the next five months of the campaign from 2019 October to 2020 March. We highlight two neutron star–black hole candidates (S191205ah and S200105ae), two binary neutron star candidates (S191213g and S200213t), and a binary merger with a possible neutron star and a ‘MassGap’ component, S200115j. Assuming that the gravitational-wave (GW) candidates are of astrophysical origin and their location was covered by optical telescopes, we derive possible constraints on the matter ejected during the events based on the non-detection of counterparts. We find that the follow-up observations during the second half of the third observing run did not meet the necessary sensitivity to constrain the source properties of the potential GW candidate. Consequently, we suggest that different strategies have to be used to allow a better usage of the available telescope time. We examine different choices for follow-up surveys to optimize sky localization coverage versus observational depth to understand the likelihood of counterpart detection.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Nucleosynthesis and observation of the heaviest elements

Abstract The rapid neutron capture or ‘ r process’ of nucleosynthesis is believed to be responsible for the production of approximately half the natural abundance of heavy elements found on the periodic table above iron (with proton number $$Z=26$$ Z = 26 ) and all of the heavy elements above bismuth ( $$Z=83$$ Z = 83 ). In the course of creating the actinides and potentially superheavies, the r process must necessarily synthesize superheavy nuclei (those with extreme proton numbers, neutron numbers or both) far from isotopes accessible in the laboratory. Many questions about this process remain unanswered, such as ‘where in nature may this process occur?’ and ‘what are the heaviest species created by this process?’ In this review, we survey at a high level the nuclear properties relevant for the heaviest elements thought to be created in the r process. We provide a synopsis of the production and destruction mechanisms of these heavy species, in particular the actinides and superheavies, and discuss these heavy elements in relation to the astrophysical r process. We review the observational evidence of actinides found in the Solar system and in metal-poor stars and comment on the prospective of observing heavy-element production in explosive astrophysical events. Finally, we discuss the possibility that future observations and laboratory experiments will provide new information in understanding the production of the heaviest elements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Extending Analysis of Asay Windows to High Areal Mass Range [Slides]

The accretion layer addition to Asay window analysis results in new equations of motion that depend on the location of collisions within the layer. Asay window equations of motion can be represented in terms of experiment observables. Balance of linear momentum for variable mass systems provides a framework for developing equations of motion for Asay window diagnostics under a variety of operating assumptions. The growth in the accretion layer thickness during an experiment substantially influences mass and density measurements when high accumulation of areal mass is present.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Extending the Asay window measurement model to high areal mass ranges [Slides]

97 MATHEMATICS AND COMPUTING↗