Search NASA⌕ Search

SEARCH · Search NASA

Results for “OPTICAL MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Ultra-compact low loss electro-optical nanobeam cavity modulator embedded photonic crystal

In this paper, a hybrid electro-optical modulator based on a one-dimensional photonic crystal nanobeam cavity is proposed. The main component of the cavity builder is the indium–tin–oxide that is a transparent conductive oxide. The proposed structure is used to minimize optical losses and also to have a high-quality factor with a tunability from the distributed feedback system. The proposed modulator has a wide range of resonant tunable in a footprint of 1.892 μm{sup 2}. This structure has the ability to shift the wavelength of 1.55 μm using a very small voltage 0.1 V. Simulation results show that the proposed structure has an insertion loss of 0.027 dB, extension ratio 3.484 dB, 119.89 GHz modulation speed, and 0.59 aJ/bit modulation energy. By comparing the proposed method parameters and other modulators based on the one-dimensional photonic crystal nanobeam cavity, a significant improvement in modulation voltage, insertion losses, energy consumption, and footprint have been observed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fiber Front End With Multiple Phase Modulations and High-Bandwidth Pulse Shaping for High-Energy Laser-Beam Smoothing

The design and performance of a fiber front end delivering temporally shaped, phase-modulated optical pulses to a large-scale, high-energy laser system to demonstrate beam-smoothing concepts are presented.High-bandwidth LiNbO3 (lithium niobate) Mach--Zehnder modulators and arbitrary waveform generators temporally shape the power of the optical pulses. High-bandwidth, three-section LiNbO3 phase modulators precisely modulate the optical phase of the pulses at up to three microwave frequencies. Various calibration procedures and fail-safe systems are described. Sources of frequency-modulation-to-amplitude-modulation conversion, which can lead to unsafe operation of the high-energy laser system, are identified and compensated by amplitude and dispersion compensators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rapid Optical Shutter, Chopper, Modulator and Deflector

An optical device with a light source and a detector is provided. A digital micromirror device positioned between the detector and the light source may deflect light beams projected from the light source. An aperture in front of the detector may block an incoming light beam from the detector when the incoming light beam is incident on the detector outside of a passable incident range and including an aperture opening configured to pass the incoming light beam to the detector when the incoming light beam is incident on the detector within a passable incident range. The digital micromirror device may rotate between a first position causing the light beam to pass through the aperture opening and a second position causing the light beam to be blocked by the aperture. The optical device may be configured to operate as a shutter, chopper, modulator and/or deflector.

Danehy, Paul M.↗

Timing performance of phased-locked loops in optical pulse position modulation communication systems

An optical digital communication system requires that an accurate clock signal be available at the receiver for proper synchronization with the transmitted signal. Phase synchronization is especially critical in M-ary pulse position modulation (PPM) systems where the optimum decision scheme is an energy detector which compares the energy in each of M time slots to decide which of M possible words was sent. Timing errors cause energy spillover into adjacent time slots (a form of intersymbol interference) so that only a portion of the signal energy may be attributed to the correct time slot. This effect decreases the effective signal, increases the effective noise, and increases the probability of error. A timing subsystem for a satellite-to-satellite optical PPM communication link is simulated. The receiver employs direct photodetection, preprocessing of the detected signal, and a phase-locked loop for timing synchronization. The variance of the relative phase error is examined under varying signal strength conditions as an indication of loop performance, and simulation results are compared to theoretical calculations.

Lafaw, D. A.↗

An ultrafast laser pulse picker technique for high-average-current high-brightness photoinjectors

Beam diagnostics in high brightness photoinjectors requires that optical pulses from a high-power drive laser be picked up with an ultrahigh pulse contrast ratio and without temporal profile distortion. In high-average-current high-brightness photoinjectors, high-power drive lasers are routinely operated at GHz-level pulse repetition rate and it is challenging to achieve pulse picking without any pulse distortion. Here, we report on a new ultrafast pulse picker technique for beam diagnostics in high-average-current high-brightness photoinjectors. By efficiently combining an ultrafast low-power electro-optic modulator, high-power fiber laser amplifiers, a high-power Pockels Cell, and a frequency doubling module, we have successfully demonstrated optical bunch (30 pulses per bunch) pickup from a 704 MHz high-power drive laser and achieved a 10 6 :1 pulse contrast ratio and nearly zero pulse distortion. The performance of this pulse picking technique has been verified through beam characterization and electron cooling in the low energy RHIC electron cooling accelerator at Brookhaven National Laboratory.

43 PARTICLE ACCELERATORS↗

Shot-noise-limited magnetometer with sub-picotesla sensitivity at room temperature

We report a photon shot-noise-limited (SNL) optical magnetometer based on amplitude modulated optical rotation using a room-temperature {sup 85}Rb vapor in a cell with anti-relaxation coating. The instrument achieves a room-temperature sensitivity of 70 fT/√(Hz) at 7.6 μT. Experimental scaling of noise with optical power, in agreement with theoretical predictions, confirms the SNL behaviour from 5 μT to 75 μT. The combination of best-in-class sensitivity and SNL operation makes the system a promising candidate for application of squeezed light to a state-of-the-art atomic sensor.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Holmium-doped fibre amplifier operating at 2.1 μm

A small-signal holmium-doped fibre amplifier is demonstrated. The seed source is a cw holmium-doped fibre laser whose output power is modulated by an electro-optical modulator. The maximum gain reached (wavelength, 2.1 μm; power, 0.25 mW; pulse duration, 100 ns; pulse repetition rate, 1 μs) is 28.5 dB. (lasers)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Excitons in atomically thin 2D semiconductors and their applications

The research on emerging layered two-dimensional (2D) semiconductors, such as molybdenum disulfide (MoS 2 ), reveals unique optical properties generating significant interest. Experimentally, these materials were observed to host extremely strong light-matter interactions as a result of the enhanced excitonic effect in two dimensions. Thus, understanding and manipulating the excitons are crucial to unlocking the potential of 2D materials for future photonic and optoelectronic devices. Here in this review, we unravel the physical origin of the strong excitonic effect and unique optical selection rules in 2D semiconductors. In addition, control of these excitons by optical, electrical, as well as mechanical means is examined. Finally, the resultant devices such as excitonic light emitting diodes, lasers, optical modulators, and coupling in an optical cavity are overviewed, demonstrating how excitons can shape future 2D optoelectronics.

36 MATERIALS SCIENCE↗

R.F Microphotonics for NASA Space Communications Applications

An RF microphotonic receiver has-been developed at Ka-band. The receiver consists of a lithium niobate micro-disk that enables RF-optical coupling to occur. The modulated optical signal (- 200 THz) is detected by the high-speed photonic signal processing electronics. When compared with an electronic approach, the microphotonic receiver technology offers 10 times smaller volume, smaller weight, and smaller power consumption; greater sensitivity; and optical isolation for use in extreme environments. The status of the technology development will be summarized, and the potential application of the receiver to NASA space communications systems will be described.

Pouch, John↗

Fiber optic sensors for military, industrial and commercial applications

Four examples of specific fiber optic sensor system designs, each of which demonstrates a different optical modulation format, are described. The birefrigent temperature transducer illustrates direct digital signal modulation. The temperature/pressure dependent semiconductor filter illustrates high-pass optical wavelength signal encoding. The coupled polarized-mode transducer shows how a solid-state sensor can produce narrow-bandpass optical wavelength signal encoding. The luminescent temperature sensor illustrates a way to construct a solid state sensor in order to produce pulse width modulation of an optical signal.

James, K. A.↗

On the Theory of the Modulation Instability in Optical Fiber and Laser Amplifiers

The modulation instability (MI) in optical fiber amplifiers and lasers with anomalous dispersion leads to CW beam breakup and the growth of multiple pulses. This can be both a detrimental effect, limiting the performance of amplifiers, and also an underlying physical mechanism in the operation of MI-based devices. Here we revisit the analytical theory of MI in fiber optical amplifiers. The results of the exact theory are compared with the previously used adiabatic approximation model, and the range of applicability of the latter is determined. The same technique is applicable to the study of spatial MI in solid state laser amplifiers and MI in non-uniform media.

42 ENGINEERING↗

Laser-Modulation-Driven X-Ray Pulse Shaping in Regenerative Amplifier Free-Electron Lasers

In this Letter, we present a robust method for generating custom-shaped, coherent hard x-ray pulses in regenerative amplifier free-electron lasers (RAFELs) using laser-induced energy modulation of the electron beam. A temporally shaped optical modulation imprints an optical-wavelength energy pattern on the beam, which interacts with the recirculated seed in the x-ray cavity to generate spectral sidebands. These sidebands lie outside the Bragg reflection bandwidth and are extracted as out-coupled radiation, while the seed is retained for continued amplification, enabling a novel mechanism for both output coupling and pulse shaping. Furthermore, this approach allows deterministic control over the spectral and temporal properties of the emitted x-rays, including multicolor generation, twin-pulse structures, pulse duration tuning, and complex temporal waveforms. Importantly, it does not require modification of the RAFEL cavity or optics and is fully compatible with high-repetition-rate operation, offering a practical pathway to deliver coherent, shaped, and on-demand x-ray pulses for advanced time-resolved and nonlinear x-ray science.

Free-electron lasers↗

WGM-Based Photonic Local Oscillators and Modulators

Photonic local oscillators and modulators that include whispering-gallery mode (WGM) optical resonators have been proposed as power-efficient devices for generating and detecting radiation at frequencies of the order of a terahertz. These devices are intended especially to satisfy anticipated needs for receivers capable of detecting lowpower, narrow-band terahertz signals to be used for sensing substances of interest in scientific and military applications. At present, available terahertz-signal detectors are power-inefficient and do not afford the spectral and amplitude resolution needed for detecting such signals. The proposed devices would not be designed according to the conventional approach of direct detection of terahertz radiation. Instead, terahertz radiation would first be up-converted into the optical domain, wherein signals could be processed efficiently by photonic means and detected by optical photodetectors, which are more efficient than are photodetectors used in conventional direct detection of terahertz radiation. The photonic devices used to effect the up-conversion would include a tunable optical local oscillator and a novel electro-optical modulator. A local oscillator according to the proposal would be a WGM-based modelocked laser operating at a desired pulserepetition rate of the order of a terahertz. The oscillator would include a terahertz optical filter based on a WGM microresonator, a fiber-optic delay line, an optical amplifier (which could be either a semiconductor optical amplifier or an erbium-doped optical fiberamplifier), and a WGM Ka-band modulator. The terahertz repetition rate would be obtained through harmonic mode locking: for example, by modulating the light at a frequency of 33 GHz and locking each 33d optical mode, one would create a 1.089-THz pulse train. The high resonance quality factors (Q values) of WGM optical resonators should make it possible to decrease signal-generation threshold power levels significantly below those of other optical-signal-generation devices.

Matsko, Andrey↗

Reverse Polarizability of Rare Earth Ions (La 3+ , Gd 3+ , Lu 3+ , Y 3+ ) in Tellurite Glasses and Glass Ceramics for Optical Limiting

All-optical modulation using inherent third-order optical nonlinearity of a medium has garnered considerable interest in photonics and optoelectronics. Herein, nonlinear optical (NLO) properties of tellurite glasses and glass ceramics (GCs) containing four different rare earths (RE = La, Gd, Lu, and Y) have been deliberated in near-infrared regions under an ultrafast regime. The La-based glass exhibits ~10 times higher nonlinear refraction (n 2 ) and absorption (α 2 ) than reported NLO materials. The NLO susceptibility [χ (3) ] trend in the studied glasses is La > Gd > Lu > Y, matching with RE 3+ polarizability. Furthermore, Ln 2 Te 6 O 15 nanocrystallite-embedded transparent GCs exhibit a larger NLO coefficient due to the enhanced local field from oxygen vacancies in crystallites. Interestingly, the trend of χ (3) in GCs follows the sequence of Y > Lu > Gd > La, precisely opposite to the glasses. This observation challenges the general polarizability approach of RE 3+ ions, emphasizing that quadratic hyperpolarizability of RE 3+ is pivotal for NLO properties of GCs. Among the studied matrices, Y-containing GCs showed the lowest optical limiting (OL) threshold (5.4 mJ/cm 2 at 800 nm), much lower than those of the reported NLO materials, suggesting its potential as a femtosecond NIR-laser safety material. A combination of large α 2 and n 2 from the studied matrices indicates their advantage for harmonic generation, potentially aiding in the design of ultrafast signal processing devices.

36 MATERIALS SCIENCE↗

New optical technology for low mass intelligent trigger and readout.

New optical devices offer the potential for reductions in mass, power, and cost of data paths for on-board trigger and readout of tracking detectors. We give examples of optical modulators, MEMS beam steering devices, and optical coupling. We also present results on radiation hardness of materials as well as different approaches to using optics in triggering.

99 GENERAL AND MISCELLANEOUS↗

Packaging Considerations for Integrated RF Microphotonic Receiver at Ka-Band

The NASA Computing, Information and Communications Technology (CICT) Program is supporting the development of an RF microphotonic Ka-band receiver. The receiver consists of a lithium niobate micro-disk that enables the incoming RF signal (up to Ka-band) to be coupled to the optical signal (approx. 200 THz). The modulated optical signal is detected by the high-speed photonic signal processing electronics. When compared with an all-electronic approach, the microphotonic receiver technology offers 1 Ox smaller volume, smaller weight, and smaller power consumption, greater sensitivity, and optical isolation for applications in extreme environments. It could potentially be implemented to support planetary surface-to-surface and surface-to-relay communications, as well as high-data-rate inter-satellite links. We are currently studying a number of fabrication and integration issues that could result as this technology is advanced for potential insertion into a NASA mission. The results of our preliminary effort to integrate the RF microphotonic receiver components (e.g., the lithium niobate micro-disk, the optical elements, and the Ka-band patch antenna) on an etched silicon wafer will be presented, In addition, the concomitant integration and packaging issues, and the potential NASA applications will be discussed.

Nguyen, Hung↗

Improved DMD configurations for image correlation

Two novel deformable mirror structures have been developed for spatial light modulators: an 'AM torsion beam' and a 'phase-mostly single-quadrant cantilever' beam. Both devices are well-suited to optical correlator input and filtering functions. Which the optical modulation characteristic of the torsion-beam modulator is essential amplitude only, which is well suited for use as the input modulator of the optical correlator, the characteristic of the one-quadrant modulator is a phase-mostly modulation whose amplitude changes are coupled to the phase changes; this renders it operable in the Fourier plane of the optical correlator as the filtering device.

Florence, James M.↗