Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ocean Wave Energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Reduced viscosity steadily weakens oceanic currents

The viscosity of both air and water is temperature dependent. A rising temperature leads to an increased viscosity for air but a decreased viscosity for water. As climate becomes warmer, this increased air viscosity can partly inhibit the reduction of wind stress over the ocean, and the reduced water viscosity causes less downward momentum and heat transport. As these opposing effects of warming on air and water viscosity are not included in the state-of-the-art climate models, the understanding of their potential impacts on the response of the climate system to the anthropogenic warming is lacking. Here, via analyzing the Simple Ocean Data Assimilation oceanic reanalysis dataset, we show that the ocean heat content increases at a rate of ~1.3 × 10 22 J/yr over 35 years, which leads to a continuous reduction of oceanic viscosity. As a result, the ocean vertical shear enhances with a shoaling of the mixed layer depth and a reduced vertical linkage in the ocean. Our calculations show a reduction of the oceanic kinetic energy at a rate of ~2.4 × 10 16 J/yr. Potentially, this could generate far-reaching impacts on the energy storage of the climate system and, hence, could pace the global warming. Thus, it is important to include the temperature-dependent viscosity in our climate models. Freshwater discharged from polar ice sheets and mountain glaciers also contributes to the reduction in oceanic viscosity but, at present, to a lesser extent than that in oceanic warming. Reduced oceanic viscosity, therefore, is an important, but hitherto overlooked, response to a warming climate and contributes to many recent weather extremes including heavier rainfall rates in hurricanes, slackening of the polar vortex, and oceanic heat waves.

54 ENVIRONMENTAL SCIENCES↗

Observationally driven Resource Assessment with CoupLEd models (ORACLE)

This project seeks to carry out a multifaceted analysis combining buoy observations, machine learning, turbulence, satellite data and high-resolution modeling. Our analyses will investigate air–sea interaction physics governing the variation of the winds with height and influence of clouds, uncertainty in coupled ocean-wave-atmosphere mesoscale models to capture certain key atmospheric phenomenon observed over the U.S. West Coast, impact of climate change, and the fidelity with which resource characterization models describe the range of observed offshore wind conditions. This project will focus its efforts on characterizing and assessing the atmospheric and oceanographic conditions along the U.S. West Coast.

Wind, Energy↗

How an Autonomous Offshore Power System Can Transform the Ocean Economy - A Hypothetical Case Study Utilizing an Autonomous Offshore Power System in Northern Lights Carbon Capture and Storage Project

An Autonomous Offshore Power System (AOPS) provides in-situ power, energy storage, real-time data and communications support, asset management, and other capabilities at sea. It has applications for all offshore industries: energy, defense and security, aquaculture, science and research, and communications. Furthermore, this paper highlights how an AOPS can reduce cost, complexity, and carbon-intensity for existing offshore operations and enable new capabilities for offshore industry leaders. This new AOPS technology has two primary advantages. First, it unlocks the autonomous, electric future of the ocean economy via ‘local’ power generation and energy storage, in addition to real-time connection to the data cloud. Second, it helps enable a material change in the global energy mix through cost-effective, reliable generation and storage technology for use cases including mobile/static data-gathering and reporting systems, operating equipment, and charging networks for uncrewed surface vessels. AOPS technology will help transform the ocean economy, and thus has implications for offshore industry leaders as they push to reduce costs today and make an autonomous and decarbonized future possible.

16 TIDAL AND WAVE POWER↗

Data for Post-Access Report: Tidal Energy Resource Characterization and Model Validation via the Assessment of Cost-effective Spatially Distributed Current Measurements from microFloat Swarms

This project evaluated how high-resolution, spatially distributed field data can be used to refine and validate site-scale hydrodynamic simulations of tidal channels. Use of such spatially-distributed field observations or site-scale hydrodynamic simulations will be needed for producing accurate predictions of tidal energy production over larger arrays of tidal turbines. The data contained in this archive includes field observations of water velocity from a series of short surveys in Agate Pass taken on August 20th, 2020 using station-keeping ADCP (acoustic doppler current profiler) measurements, drifting downward-looking ADCPs, and microFloats, gathered by researchers at APL-UW under a previous project. It also includes high-resolution hydrodynamic model runs for the site during that time generated under TEAMER support. An explanatory file (.pdf format) describes the survey and field data structure. Processed data is stored in .mat format. Survey summary: start time, number of floats, water level. microFloat data: - Cleaned data for each float in survey, - Time series of position (lat., lon.), depth (relative to surface), and horizontal velocity (u, v) Drifting ADCP data: - Cleaned data for each drifting ADCP in survey - Time series of position (lat., lon.), sample depth (relative to surface), and observed water velocity (u,v,w) Stationary ADCP data: - Cleaned data for each station-keeping data set in survey - Time series of position (lat., lon.), sample depth (relative to surface), and observed water velocity (u,v,w) FVCOM (Finite Volume Coastal Ocean Model) model outputs: Water level and velocity, as well as derived variables (e.g., power density) from the final refined model simulations for the Agate Pass subdomain. Contained in NetCDF and ASCII files for the duration of August 18th and 20th 2020 field surveys. Additional scripts for processing the data and generating the figures in the report are included.

16 TIDAL AND WAVE POWER↗

Global Distribution of EMIC Waves and Its Association to Subauroral Proton Precipitation During the 27 May 2017 Storm: Modeling and Multipoint Observations

Recent simulation studies using the RAM-SCB model showed that proton precipitation contributes significantly to the total energy flux deposited into the subauroral ionosphere thereby affecting the magnetosphere-ionosphere coupling. Here, in this study, we use the BATS-R-US + RAM-SCB model to understand the evolution of ElectroMagnetic Ion Cyclotron (EMIC) waves in the inner magnetosphere, their correspondence to the proton precipitation into the subauroral ionosphere, and to assess the performance of the model in reproducing the EMIC wave-particle interactions. During the 27 May 2017 storm, Arase and RBSP-A satellites observed typical signatures of EMIC waves in the inner magnetosphere. Within this interval, Defense Meteorological Satellite Program (DMSP) and National Oceanic and Atmospheric Administration (NOAA)/MetOp satellites observed significant proton precipitation in the dusk-midnight sector. Simulation results show that H- and He-band EMIC waves are excited within regions of strong temperature anisotropy near the plasmapause. The simulated growth rates of EMIC waves show a similar trend to that of the EMIC wave power observed by the Arase and RBSP-A satellites, suggesting that the model can reproduce the EMIC wave activity qualitatively. The simulated H-band waves in the dusk sector are stronger than He-band waves possibly due to the presence of excess protons in the boundary conditions obtained from the BATS-R-US code. The precipitating proton fluxes reproduced by the simulation with EMIC waves are found to agree reasonably well with the DMSP and NOAA/MetOp satellite observations. It is suggested that EMIC wave scattering of ring current ions can account for proton precipitation observed by the DMSP and MetOp satellites during the 27 May 2017 storm.

79 ASTRONOMY AND ASTROPHYSICS↗

A Tidal Hydrodynamic Model for Cook Inlet, Alaska, to Support Tidal Energy Resource Characterization

Cook Inlet in Alaska has been identified as a prime site in the U.S. for potential tidal energy development, because of its enormous tidal power potential that accounts for nearly one-third of the national total. As one important step to facilitate tidal energy development, a tidal hydrodynamic model based on the unstructured-grid, finite-volume community ocean model (FVCOM) was developed for Cook Inlet to characterize the tidal stream energy resource. The model has a grid resolution that varies from about 1000 m at the open boundary to 100–300 m inside the Inlet. Extensive model validation was achieved by comparing model predictions with field observations for tidal elevation and velocity at various locations in Cook Inlet. The error statistics confirmed the model performs reasonably well in capturing the tidal dynamics in the system, e.g., R2 > 0.98 for tidal elevation and generally > 0.9 for velocity. Model results suggest that tides in Cook Inlet evolve from progressive waves at the entrance to standing waves at the upper Inlet, and that semi-diurnal tidal constituents are amplified more rapidly than diurnal constituents. The model output was used to identify hotspots that have high energy potential and warrant additional velocity and turbulence measurements such as East Foreland, where averaged power density exceeds 5 kw/m2. Lastly, a tidal energy extraction simulation was conducted for a hypothetical turbine farm configuration at the Forelands cross section to evaluate tidal energy extraction and resulting changes in far-field hydrodynamics.

16 TIDAL AND WAVE POWER↗

Efficiently resolving the terrestrial-aquatic interface in E3SM with sub-grid methods to improve coastal simulations (Final Technical Report)

The broad goal of this project was to extend the capabilities of MPAS‐Ocean, the ocean component of DOE’s Energy Exascale Earth System Model (E3SM), to better resolve the hydrodynamics of the terrestrial‐aquatic interface without significantly increasing computing resource requirements. Specifically, our goal was to better resolve the small-scale features across the terrestrial‐aquatic interface which includes the low lying coastal floodplain and a dendritic network of hydraulically efficient channels connected to estuarine systems and back bays, barrier islands and high energy inlets. The processes driving flow across the terrestrial‐aquatic interface include upland and floodplain hydrology, tides, wind and atmospheric pressure (including coastally generated storm surge across continental shelves and within estuaries and bays), wind waves and water temperature and salinity gradients.

58 GEOSCIENCES↗

Sea-Ice Effects on the Alaskan Wave Climate

This study investigates the uncertainty of wave resource assessments due to sea ice in the nearshore region of Alaska using an innovative approach of combining remotely sensed data and a third-generation phase-averaged wave model. Modeling analysis focused on winter months, when high wave energy is present along with sea ice. This study includes recommendations to improve the accuracy of wave resource assessments and optimize marine and hydrokinetic device siting with consideration of sea-ice effects. Additional recommendations, based on preliminary sea-ice information in Cook Inlet, Alaska, are provided for a trajectory analysis of drifting sea ice and a collision risk assessment of sea ice and tidal turbines. The outcome of this project will provide valuable information about the level of sea-ice impact on the accuracy of wave resource assessments in the Alaska nearshore region, and of sea-ice collision risk with MHK devices and ocean observation systems during winter months when sea ice is present.

16 TIDAL AND WAVE POWER↗

Application of Ocean Thermal Energy Conversion (OTEC) Systems for Powering Safety Monitoring Systems of Offshore Oil and Gas Operations. OESI 2.0 M-1 T-1-P1.1 – Objective 1 Interim Report: Summary of Offshore Oil and Gas Well Monitoring Systems and Process Power Requirements

This report is part of a comprehensive research initiative aimed at evaluating the technoeconomic feasibility of deploying greenhouse gas (GHG) emissions monitoring systems powered by small-scale renewable energy sources on the U.S. Outer Continental Shelf (OCS). The study has three primary objectives: summarizing available GHG monitoring systems for the OCS, modeling a renewable marine energy source (specifically ocean thermal energy conversion, or OTEC), and modeling the collocation of OTEC power sources with offshore oil and gas activities to offset power demand.

02 PETROLEUM↗

The diurnal cycle of entrainment and detrainment in LES of the Southern Ocean driven by observed surface fluxes and waves

Empirical rules for both entrainment and detrainment are developed from LES of the Southern Ocean boundary layer when the turbulence, stratification, and shear cannot be assumed to be in equilibrium with diurnal variability in surface flux and wave (Stokes drift) forcing. A major consequence is the failure of downgradient eddy viscosity, which becomes more serious with Stokes drift and is overcome by relating the angle between the stress and shear vectors to the orientations of Lagrangian shear to the surface and of local Eulerian shear over 5 m. Thus, the momentum flux can be parameterized as a stress magnitude and this empirical direction. In addition, the response of a deep boundary layer to sufficiently strong diurnal heating includes boundary layer collapse and the subsequent growth of a morning boundary layer, whose depth is empirically related to the time history of the forcing, as are both morning detrainment and afternoon entrainment into weak diurnal stratification. Below the boundary layer, detrainment rules give the maximum buoyancy flux and its depth, as well a specific stress direction. Another rule relates both afternoon and nighttime entrainment depth and buoyancy flux to surface layer turbulent kinetic energy production integrals. These empirical relationships are combined with rules for boundary layer transport to formulate two parameterizations; one based on eddy diffusivity and viscosity profiles and another on flux profiles of buoyancy and of stress magnitude. Evaluations against LES fluxes show the flux profiles to be more representative of the diurnal cycle, especially with Stokes drift.

54 ENVIRONMENTAL SCIENCES↗

Design of high-deflection foils MHK applications - CFD models - RivGen turbine

The Ocean Renewable Power Company's (ORPC's) goal is to design, develop, and test hydrofoils with large deflections. The effects of the deflections on cross-flow turbine performance would be evaluated in order to inform design considerations for full-scale water turbines and other marine hydrokinetic devices. CFD Models OpenFOAM V1912 RivGen turbine

16 TIDAL AND WAVE POWER↗

Tidal Currents in San Juan Archipelago, Washington

Re-analyzed acoustic Doppler current profiler (ADCP) data originally collected by NOAA CO-OPS (Center for Operational Oceanographic Products and Services) and equivalent point data from Pacific Northwest National Laboratory's FVCOM (Finite Volume Community Ocean Model) model of the region. Data are processed to products describing characteristics of tidal currents relevant to tidal turbines, as well as power output estimates for a notional turbine deployed from a surface platform or from the seabed at each location. These data underpin the results presented in their associated paper - see below.

16 TIDAL AND WAVE POWER↗

Evaluation of coupled wind-wave model simulations of offshore winds in the Mid-Atlantic Bight using lidar-equipped buoys.

From 2014 to 2017, two Department of Energy buoys equipped with Doppler lidar were deployed off the U.S. East Coast to provide long term measurements of hub-height wind speed in the marine environment. In this study, we performed simulations of selected cases from the deployment using a 5-km configuration of the Weather Research and Forecasting (WRF) model, to see if simulated hub height speeds could produce closer agreement with the observations than existing reanalysis products. For each case we performed two additional simulations: one in which marine surface roughness height was one-way coupled to forecast wave parameters from a standalone WaveWatch III (WW3) simulation, and another in which WRF and WW3 were two-way coupled using the Coupled-Ocean-Atmosphere-Wave-Sediment-Transport (COAWST) framework. It was found that all the 5-km WRF simulations improved 90-m wind speed statistics for the tropical cyclone case of 08 May 2015 and the cold frontal case of 25 Mar 2016, but not the nor-easter of 18 Jan 2016. The impact of wave coupling on buoy-level (4 m) wind speed was modest and case dependent, but when present, the impact was typically seen at 90 m as well, being as large as 10% in stable conditions. One-way wave coupling consistently reduced wind speeds, improving biases for 25 Mar 2016 but worsening them for 08 May 2015. Two-way wave coupling mitigated these negative biases, improved wave field representation and statistics, and mostly improved 4-m wind field correlation coefficients, at least at the VA buoy, largely due to greater self-consistency between wind and wave fields.

54 ENVIRONMENTAL SCIENCES↗

Powering the Blue Economy - Ocean Observing Use Cases Report

The "Powering the Blue Economy" (PBE) Report identified ocean observing and autonomous underwater vehicle (AUV) recharge as near-term markets with significant potential for marine energy integration when specified qualitative and quantitative assessment criteria were used. The ocean observing market (including AUVs) scored high relative to other markets analyzed in the PBE Report with respect to market size, marine renewable energy (MRE) compatibility with functional requirements, competitive positioning (i.e., MRE versus other power sources), path to market, and alignment to the Department of Energy Water Power Technologies Office (WPTO) and other agencies' objectives. Based on this scoring, Pacific Northwest National Laboratory (PNNL) and the National Renewable Energy Laboratory (NREL) pursued the development of five use cases that represent a spectrum of ocean observation platforms, fixed and mobile, to explore the present and future power needs that might be satisfied by marine energy. The use cases were described and analyzed for this potential by examining current missions and future needs, evaluating the mix of renewable energy sources that might satisfy those needs at sea, and understanding the overall cost drivers that might enable this application.

14 SOLAR ENERGY↗

Design of high-deflection foils MHK applications - FEA models - RivGen Turbines

The Ocean Renewable Power Company's (ORPC's) goal is to design, develop, and test hydrofoils with large deflections. The effects of the deflections on cross-flow turbine performance would be evaluated in order to inform design considerations for full-scale water turbines and other marine hydrokinetic devices. FEA models - NASTRAN Baseline RivGen turbine Proposed new design

16 TIDAL AND WAVE POWER↗

Integrated path planning and control through proximal policy optimization for a marine current turbine

This paper presents an integrated path planning and tracking control framework for a marine current turbine (MCT), where the MCT is treated as an energy-harvesting autonomous underwater vehicle (AUV). Considering the ocean (space of action) is continuous, the proposed framework employs two modules to address path planning and path tracking enabled by the proximal policy optimization (PPO) algorithm, which is a policy gradient deep reinforcement learning (RL) method. Further, to enable fully autonomous operation in a stochastic oceanic environment, the proposed path planning seeks a primary objective of maximizing the harvested energy; then, the path tracking module is designed to minimize the tracking error and avoid collisions with static and dynamic obstacles. Using field-collected acoustic Doppler current profiler (ADCP) data, the performance of the proposed framework is evaluated. Comparative studies with baseline algorithms in three different scenarios of path planning, path tracking without an obstacle, and path tracking with collision avoidance verify the effectiveness of our proposed approach.

16 TIDAL AND WAVE POWER↗

Sea surface warming and ocean-to-atmosphere feedback driven by large-scale offshore wind farms under seasonally stratified conditions

Offshore wind farms may induce changes in the upper ocean and near-surface atmosphere through coupled ocean-atmosphere feedbacks. Yet, the role of air-sea interactions mediated by offshore wind farms remains poorly understood. Using fully coupled ocean-atmosphere-wave model simulations for seasonally stratified conditions along the US East Coast, we show that simulated cumulative reductions in wind stress due to large-scale wind farm clusters lead to sea surface warming of 0.3° to 0.4°C and a shallower mixed layer. This warming drives upward heat fluxes, destabilizing the atmospheric boundary layer and enhancing wind stress, which partially offsets wake-induced wind deficits. These wake-ocean interactions influence near-surface meteorology and air-sea fluxes, suggesting that a coupled modeling approach may be necessary for assessing potential oceanographic impacts of offshore wind developments. However, ocean coupling exerts limited influence on winds at turbine-relevant heights or within downstream wakes, resulting in minimal impact on long-term energy. These findings suggest that models without ocean coupling may be adequate for wind energy applications.

17 WIND ENERGY↗

High-Resolution Regional Atmosphere–Ocean–Wave Coupled Simulations of Hurricane Henri (2021)

To explore the integrated effects of ocean and ocean surface wave related physical processes on TC simulations, a set of three model simulations is performed. * In experiment 'A', the event is modeled using the Weather Research Forecasting (WRF) model alone with prescribed Sea Surface Temperature (SST) at 6-hour intervals. * In experiment ‘AO,’ WRF is coupled with the Finite Volume Community Ocean Model (FVCOM), enabling variable exchange between atmosphere and ocean, but without considering ocean surface wave-related physical processes. * In experiment ‘AOW’, WRF, FVCOM, and Simulating WAves Nearshore (SWAN) exchange variables with each other every hour through the OASIS3-MCT Coupler to allow direct and indirect atmosphere-ocean-wave interactions. * Observational data are also included in this dataset (Dropsonde, HRD-Radar, NDBC_wave). All simulations are initialized at 18:00 UTC on August 19, 2021, within a domain encompassing the western North Atlantic Ocean. The atmospheric domain features a horizontal resolution of 3 km. The ocean domain, which covers a substantial portion of the WRF ocean domain, employs an unstructured triangular grid with resolutions ranging from 3 km near the coast to 9 km in the open ocean, effectively resolving the complex coastline of the U.S. Northeast Coast. Initial and boundary conditions for the atmosphere model are obtained from the 6-hourly 0.25° NCEP (National Centers for Environmental Prediction) Global Forecast System (GFS; NCEP, 2015) data.

17 WIND ENERGY↗