Search NASA⌕ Search

SEARCH · Search NASA

Results for “Olefin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Scalable Frontal Oligomerization: Insights from Advanced Mass Analysis

Linear oligomers of dicyclopentadiene (DCPD) are reactive precursors for thermoplastic and thermoset materials. Unlike the foul-smelling parent monomer, oligomers composed of DCPD are odorless. With appropriate modification of the end-group or backbone chemistry, telechelic DCPD oligomers have potential utility as cross-linkers and as macromonomer precursors for block and graft copolymers. Most existing methods to produce oligo-DCPD, however, require solvent, are relatively slow, and necessitate air-free techniques. Here we show that frontal ring-opening metathesis oligomerization (FROMO) of neat DCPD and other norbornene derivatives rapidly generates hundreds of grams of material in minutes with catalyst loadings of 0.5 mM. This energy-efficient catalytic process utilizes the heat generated by the reaction to self-propagate oligomerization throughout the liquid monomer. FROMO employs a terminal olefin (e.g., styrene) in which a cross-metathesis reaction (i.e., chain transfer) competes with ring-opening metathesis (i.e., propagation). Kendrick mass analysis enables rapid identification and assignment of all the chain-end types present and quantifies the degree of branching resulting from the infrequent cyclopentene ring-opening reaction. This analytical technique also detects oligomer species derived from trace impurities in the monomer or chain-transfer agent that are otherwise difficult to observe with other characterization methods. Here, the obtained oligomers possess well-defined chain-ends and molecular weight distributions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Simple Monomers for Precise Polymer Functionalization During Ring-Opening Metathesis Polymerization

Controlling the monomer sequence of synthetic polymers is a grand challenge in polymer science. Conventional sequence control has been achieved in dispersed polymers by exploiting the kinetic tendencies of monomers and their order of addition. While the sequence of blocks in multiblock copolymers can be readily tuned using sequential addition of monomers (SAM), control over the sequence distribution is eroded as the targeted block size approaches a single monomer unit (i.e., X n ~ 1) due to the stochastic nature of chain-growth reactions. Thus, unique monomers are needed to ensure precise single additions. Herein, we investigate common classes of cyclic olefin monomers for ring-opening metathesis polymerization (ROMP) to identify monomers for single unit addition during sequential monomer addition synthesis. Through careful analysis of polymerization kinetics, we find that easily synthesized oxanorbornene imide monomers are suitable for single-addition reactions. With the identified monomers, we demonstrate the synthesis of multiblock copolymers containing up to three precise functionalization sites and singly cross-linked four-armed star copolymers. In conclusion, we envision that expanded kinetic analyses of monomer reactivities in ROMP reactions will enable novel polymer synthesis capabilities such as the autonomous synthesis of sequence-defined polymers or one-shot multiblock copolymer syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Poly(cyclosilane) Postpolymerization Hydrosilylation

Postpolymerization functionalization is a key strategy in the diversification of polymeric materials for the conferral of tailored properties. Poly(cyclosilane)s are structurally complex polymers with an all-silicon backbone, featuring a periodic array of hydrido (Si–H) side chains that are potentially suitable for postpolymerization functionalization via hydrosilylation. At the same time, classical methods for hydrosilylation employing Pt- or Pd-based catalysts can result in Si–Si bond scission. In this work, we demonstrate borane-catalyzed hydrosilylation reactions between α-olefins and small molecules or three distinct poly(cyclosilane) architectures. We investigate chemoselectivity for end group versus internal Si–H groups and find that 29 Si cross-polarization magic angle spinning can provide insight on site-selectivity in the functionalization of a complex poly(cyclosilane). Furthermore, we show that postpolymerization hydrosilylation, converting oxidatively sensitive Si–H groups to Si–alkyl chains, modulates solubility and physical characteristics, optical properties, pyrolytic reactivity, and air sensitivity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis, Properties, and Metathesis Activity of Polyurethane Thermoplastics and Thermosets from a Renewable Polysesquiterpene Diol

Polyurethanes (PUs) are the sixth most commonly utilized plastic class, yet ∼80% of commodity material is landfilled or incinerated at the end of life. Disposal of thermosets is particularly problematic as cross-linking prevents the repurposing of disposed material. Thus, there is considerable interest in the development of PUs derived from inexpensive feedstocks that can be inherently chemically deconstructed. Ring opening metathesis polymerization (ROMP) of the naturally occurring sesquiterpene β-caryophyllene in the presence of dihydroxy chain terminators afforded the polyol hydroxy-terminated polycaryophyllene (HTPCR). Incorporation of HTPCR into PUs through reaction with polyisocyanates produced polymers with thermal and rheological properties comparable to commodity materials. The feasibility of chemical degradation of both thermoplastic and thermoset materials was also demonstrated through ruthenium-mediated metathesis, utilizing the metathesis-active olefins within the repeat caryophyllene monomer unit. Overall, this work highlights the value of biorenewable, chemically reprocessable polysesquiterpenes in the PU space.

materials↗
DOE OSTI2025

Tuning Copolymer Microstructure Using Ring-Opening Cross-Metathesis Polymerization

The capability of ring-opening cross-metathesis (RO/CM) polymerization to produce alternating copolymers was studied. By treating commercial polybutadiene (PB) with bulky oxanorbornene monomers and Ru-based olefin metathesis catalysts, alternating copolymers were produced under mild conditions with high sequence fidelities. Here, we found that alternating copolymers could be produced starting from a variety of butadiene sources including PB, cyclooctadiene (COD), or t,t,t-1,5,9-cyclododecatriene (CDT), highlighting for the first time the kinetic pathway independence of this process. Kinetic copolymerization analysis of an oxanorbonene monomer with CDT revealed that much higher monomer conversions were obtained compared with the analogous homopolymerizations and showed evidence of alternating monomer incorporation. Copolymerization of these monomers also enabled good control when targeting different molecular weights. Copolymer thermal analysis revealed a strong correlation between thermal behavior and alternating sequence fidelity, providing a second lever beyond composition to tune thermal behavior. These data demonstrate that a broad variety of polymer microstructures can be accessed via RO/CM polymerization and highlight the potential of CDT in alternating copolymer synthesis.

Foster, Jeffrey C. [Oak Ridge National Laboratory ↗
DOE OSTI2020

Engineering Catalysts for Selective Ester Hydrogenation

The development of efficient catalysts and processes for synthesizing functionalized (olefinic and/or chiral) primary alcohols and fluoral hemiacetals is currently needed. These are valuable building blocks for pharmaceuticals, agrochemicals, perfumes, and so forth. From an economic standpoint, bench-stable Takasago Int. Corp.’s Ru-PNP, more commonly known as Ru-MACHO, and Gusev’s Ru-SNS complexes are arguably the most appealing molecular catalysts to access primary alcohols from esters and H 2 . This work introduces economically competitive Ru-SNP(O) z complexes ( z = 0, 1), which combine key structural elements of both of these catalysts. In particular, the incorporation of SNP heteroatoms into the ligand skeleton was found to be crucial for the design of a more product-selective catalyst in the synthesis of fluoral hemiacetals under kinetically controlled conditions. Based on experimental observations and computational analysis, this paper further extends the current state-of-the-art understanding of the accelerative role of KO- t -C 4 H 9 in ester hydrogenation. Finally, it attempts to explain why a maximum turnover is seen to occur starting at ~25 mol % base, in contrast to only ~10 mol % with ketones as substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Copper Iodide-Mediated Synthesis of α-Diimine Ligands from Bis(imidoyl chlorides) and Arylstannanes

Aryl-substitued α-diimines were prepared by employing an operationally simple copper iodide-mediated Stille type coupling between polyfluoro(chloro)aryl tributylstannanes and bis(imidoyl chlorides). Reactions proceed in commercial grade N, N-dimethylformamide (DMF) solvent at 70 ºC and require no additives or bases. Couplings are successful for aryl stannanes possessing two or more fluoro or chloro substituents on the aromatic ring. Products are obtained in moderate to good yields. Furthermore, this methodology allows for a simple synthesis of α-diimine ligands potentially useful in olefin polymerization as well as other catalytic transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Supported Organoiridium-Pincer Catalysts for the Nonoxidative Dehydrogenation of High-Density Polyethylene

The iridium-pincer complex {p-OP( t Bu) 2 -C 6 H 2 -2,6-OP( t Bu) 2 ] 2 }Ir(C 2 H 4 ) ( P [Ir]) has been reported as a stable and active catalyst toward alkane dehydrogenation in homogeneous and supported heterogeneous systems. Dehydrogenation has been shown as a practical method toward functional polyolefins, with dehydrogenated high-density polyethylene (deHDPE) demonstrated as a valuable synthon for upcycling, as orthogonal C-H strategies are key to end-of-life upcycling. The heterogenization of P [Ir] on oxides (SiO 2 , Al 2 O 3 , and TiO 2 ; P [Ir]/E y O x ) yields a mixture of organometallic Ir-fragments whose catalytic nonoxidative dehydrogenation activity is modulated by the binding modes of the active metal on the surface. The binding mode was elucidated by a combination of solid-state NMR and XAFS analyses and supported by DFT calculations. Surface binding through the ligand enables active organoiridium that catalyzes internal olefination of deHDPE up to 1.23 mol % at 200 °C under dynamic vacuum. Alternatively, when the organoiridium is bonded though the metal center (Ir-O SiO ), catalyst activity is negligible. Furthermore, the catalytic activity of P [Ir]/SiO 2 showed comparable reactivity with the homogeneous analogue under the same catalytic conditions, and the heterogenized catalyst can be reused up to three cycles. In conclusion, this work highlights the importance of understanding how organometallic precursors react with hydroxylated metal oxide surfaces to establish structure-property relationships.

Hunt, Samuel B. [Argonne National Laboratory (ANL)↗
DOE OSTI2026

Rhodium-Catalyzed Arene Alkenylation Using Benzoquinone Derivatives as Oxidants

The Rh-catalyzed conversion of olefins and arenes to alkenyl arenes using [(η 2 -C 2 H 4 ) 2 Rh(μ-OPiv)] 2 as the catalyst precursor and 12 ortho- and para-substituted benzoquinone derivatives as the in situ oxidant is reported. Included are comparative studies of the quinone derivatives for (1) rate of styrene production from benzene and ethylene, (2) Markovnikov to anti-Markovnikov selectivity for reactions of benzene and propylene, and (3) ortho/meta/para selectivity when using tert-butylbenzene as the arene. Cyclic voltammetry was utilized to measure reduction potentials for each quinone to determine any possible influence of the quinone redox potential on arene alkenylation rate and selectivity. While significant differences in selectivity are observed between ortho -quinone derivatives, such differences are minimal when para-substituted quinones are utilized. These results suggest that ortho -benzoquinone derivatives likely serve as bidentate ligands, which explains the stronger influence on catalyst activity of ortho -benzoquinone identity compared to para -benzoquinones. Although ortho -benzoquinones generally give styrene production rates faster than those of para -benzoquinones, 3,5-di- tert -butyl- ortho -benzoquinone and ortho -chloranil react with ethylene to form bicyclo[2.2.2]oct-5-ene-2,3-dione derivatives as a significant side product.

aromatic compounds↗
DOE OSTI2022

Triplet Energy Transfer from Lead Halide Perovskite for Highly Selective Photocatalytic 2 + 2 Cycloaddition

Triplet excitons are generally confined within a semiconductor. Hence, solar energy utilization via direct triplet energy transfer (TET) from semiconductors is challenging. TET from lead halide perovskite semiconductors to nearby organic molecules has been illustrated with ultrafast spectroscopy. Direct utilization of solar energy, i.e., visible light, via TET for photocatalysis is an important route but has not yet been demonstrated with lead halide perovskite semiconductors. Here, we show that a photocatalytic reaction, focusing on a 2 + 2 cycloaddition reaction, can been successfully demonstrated via TET from lead halide perovskite nanocrystals (PNCs). In this work, the triplet excitons are shown to induce a highly diastereomeric syn-selective 2 + 2 cycloaddition starting from olefins. Such photocatalytic reactions probe the TET process previously only observed spectroscopically. Moreover, our observation demonstrates that bulk-like PNCs (size, >10 nm; PL = 530 nm), in addition to quantum-confined smaller PNCs, are also effective for TET. Our findings may render a new energy conversion pathway to employ PNCs via direct TET for photocatalytic organic synthesis.

14 SOLAR ENERGY↗
DOE OSTI2021

Helium Ion Microscopy with Secondary Ion Mass Spectrometry for Nanoscale Chemical Imaging and Analysis of Polyolefins

To date, chemical imaging of polymers and polymer blends has been primarily accomplished using time-of-flight secondary ion mass spectrometry (ToF-SIMS) to directly visualize the distribution of components in a complex material with spatial resolution ranging from 100 nm to 5 μm. However, in many cases, this resolution falls far short of visualizing interfaces directly. To overcome these limitations, recent work has focused on developing a SIMS detection system based on a helium ion microscope (HIM) enabling chemical imaging with a demonstrated ~14 nm spatial resolution. Here, we utilize HIM-SIMS for differentiation between the olefin-based polymers of polyethylene (PE) and polypropylene (PP). We illustrate both analyses for separating PE and PP using specific mass fragment ratios as well as demonstrate spatially resolved imaging of phase-separated domains within PE. Altogether, we demonstrate the abilities of HIM-SIMS as a multimodal chemical technique for imaging and quantification of polyolefin interfaces, which could be more broadly applied to the analysis of more complex polymeric systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Computational Investigation of the Role of Active Site Heterogeneity for aSupported Organovanadium(III) Hydrogenation Catalyst

A crucial consideration for supported heterogeneous catalysts is the nonuniformity of the active sites, particularly for supported organometallic catalysts. Standard spectroscopic techniques, such as X-ray absorption spectroscopy, reflect the nature of the most populated sites, which are often intrinsically structurally distinct from the most active catalytic sites. Additionally, with computational models, often, only a few representative structures are used to depict catalytic active sites on a surface, even though there are numerous observable factors of surface heterogeneity that contribute to the kinetically favorable active species. A previously reported study on the mechanism of a surface organovanadium-(III) catalyst [(SiO 2 )V III (Mes)(THF)] for styrene hydrogenation yielded two possible mechanisms: heterolytic cleavage and redox cycling. These two mechanistic scenarios are challenging to differentiate experimentally since the kinetic readouts of the catalyst are identical. To showcase the importance of modeling surface heterogeneity and its effect on catalytic activity, density functional theory (DFT) computational models of a series of potential active sites of [(SiO 2 )V III (Mes)(THF)] for the reaction pathways are applied in combination with kinetic Monte Carlo (kMC) simulations. Computed results were then compared to the previously reported experimental kinetic study: (1) DFT free-energy reaction pathways indicated the likely active site and pathway for styrene hydrogenation, a heterolytic cleavage pathway requiring a bare tripodal vanadium site. (2) From the kMC simulations, a mixture of different bond lengths from the support oxygen to the metal center was required to qualitatively describe the experimentally observed kinetic aspects of a supported organovanadium(III) catalyst for olefin hydrogenation. This work underscores the importance of modeling surface heterogeneity in computational catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural and Catalytic Properties of Isolated Pt 2+ Sites in Platinum Phosphide (PtP 2 )

This article describes the synthesis and catalytic properties of supported, 2-3 nm platinum phosphide (PtP 2 ) nanoparticles (NPs). Depending on the P loading, two PtP 2 structures are formed, that is, a PtP 2 surface on a (metallic) Pt core (Pt@PtP 2 ) and single-phase PtP 2 NPs. The structures were determined using extended X-ray absorption fine structure , in situ synchrotron X-ray diffraction, and scanning transmission electron microscopy. In PtP 2 NPs, Pt 2+ ions are geometrically isolated by P 2 2- ions, at a Pt-Pt distance of 4.02 Å, which is much longer than 2.78 Å in (metallic) Pt NPs. The oxidation state of Pt in PtP 2 NPs was determined by in situ X-ray absorption near-edge structure and in situ X-ray photoelectron spectroscopy and was found to be consistent with Pt 2+ ions even after treatment in H 2 at 550 °C. Unlike Pt NPs, which are highly active for propylene hydrogenation at room temperature, PtP 2 NPs are not active below about 150 °C, suggesting the absence of metallic surface Pt. In contrast to metallic Pt, which is poorly selective for acetylene hydrogenation, PtP 2 NPs display high selectivity toward ethylene. PtP 2 , also has high olefin selectivity for propane dehydrogenation, although the rate per g Pt is about 7 times lower than that of metallic Pt NPs of the same size. In situ resonant inelastic X-ray scattering spectroscopy shows that the energy of the filled Pt 5d valence orbitals is 1.5 eV lower than that of metallic Pt, which leads to weaker adsorbate binding consistent with its catalytic properties. Here, a H 2 -stable Pt 2+ site suggests different catalytic applications for these catalysts as compared to Pt NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Comparison of Heterogeneous Hydroformylation of Ethylene and Propylene over RhCo 3 /MCM-41 Catalysts

The reaction mechanisms of heterogenous hydroformylation of ethylene and propylene were compared at 413-453 K using RhCo 3 /MCM-41 as catalysts. The reaction rates of propylene for both hydroformylation and the undesired side reaction of hydrogenation were found to be about one order of magnitude lower than those for ethylene in flow reactor studies. The difference in the kinetic behavior between ethylene and propylene was investigated by measuring the reaction orders and apparent activation energies, and these macro-kinetic observables were analyzed using the degree of rate control (DRC) method. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments were performed to characterize the surface intermediates formed during the reactions. When the reactant was changed from ethylene to propylene, the IR peak corresponding to adsorbed CO exhibited a significant increase, while the IR peaks of alkyl group decreased in magnitude. Combined with the DRIFTS results, DRC analysis indicates that the first step of olefin hydroformylation, the formation of an alkyl group on the catalyst surface, plays a key role in the difference between ethylene and propylene. This step is kinetically non-relevant when ethylene is the reactant, but it is one of the rate-controlling steps for propylene. Furthermore, the low concentration of the adsorbed propyl group, which is a common intermediate shared by both hydroformylation and hydrogenation of propylene, decreases the rates of both reaction pathways as compared to ethylene.

10 SYNTHETIC FUELS↗
DOE OSTI2022

Kinetic Probes of the Origin of Activity in MOF-Based C–H Oxidation Catalysis

The development of homogeneous catalysis is enabled by the availability of a rich toolkit of kinetics experiments, such as the Hgdrop test, that differentiate catalytic activity at ligand-supported metal complexes from potential heterogeneous catalysts derived from decomposition of molecular species. Metal-organic frameworks (MOFs) have garnered significant attention as platforms for catalysis at site-isolated, interstitial catalyst sites. Unlike homogeneous catalysis, relatively few strategies have been advanced to evaluate the origin of catalytic activity in MOF-promoted reactions. Many of the MOFs that have been examined as potential catalysts are comprised of molecular constituents that represent viable catalysts in the absence of the extended MOF lattice, and thus interfacial sites and leached homogeneous species represent potential sources of catalyst activity. Here, we demonstrate that analysis of deuterium kinetic isotope effects (KIEs) and olefin epoxidation diastereoselectivity provides probes of the origin of catalytic activity in MOF-promoted oxidation reactions. These analyses support involvement of lattice-based Fe sites in the turnover-limiting step of C–H activation with Fe-MOF-74-based materials (i.e., the MOF functions as a bona fide catalyst) and evidence that Cu 2 -based MOF MIL-125-Cu 2 O 2 functions as a solid-state initiator for solution-phase oxidation chemistry and is not involved in the turnover limiting step (i.e., the MOF does not function as a catalyst for substrate functionalization). furthermore, we anticipate that the simple experiments described here will provide a valuable tool for clarifying the role of MOFs in C–H oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Lithium-Ion Battery Materials as Tunable, “Redox Non-Innocent” Catalyst Supports

The development of general strategies for the electronic tuning of a catalyst’s active site is an ongoing challenge in heterogeneous catalysis. To this end, herein, we describe the application of Li-ion battery cathode and anode materials as redox non-innocent catalyst supports that can be continuously modulated as a function of lithium intercalation. A zero-valent nickel complex was oxidatively grafted onto the surface of lithium manganese oxide (Li x Mn 2 O 4 ) to yield isolated Ni2+ occupying the vacant interstitial octahedral site in the Li diffusion channel on the surface and subsurface of the spinel structure (Ni/Li x Mn 2 O 4 ). Additionally, the activity of Ni/Li x Mn 2 O 4 for olefin hydrogenation, as a representative probe reaction, was found to increase monotonically as a function of support reductive lithiation. Simulation of Ni/Li x Mn 2 O 4 reveals the dramatic impact of surface redox states on the viability of the homolytic oxidative addition mechanism for H 2 activation. Catalyst control through support lithiation was extended to an organotantalum complex on Li x TiO 2 , demonstrating the generality of this phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Cobalt-Catalyzed Hydrogenation Reactions Enabled by Ligand-Based Storage of Dihydrogen

The use of supporting ligands that can store either protons or electrons has emerged as a powerful strategy in catalysis. While these strategies are potent individually, natural systems mediate remarkable transformations by combining the storage of both protons and electrons in the secondary coordination sphere. As such, there has been recent interest in using this strategy to enable fundamentally different transformations. Furthermore, outsourcing H-atom or hydrogen storage to ancillary ligands can also enable alternative mechanistic pathways and thereby selectivity. Here, we describe the application of this strategy to facilitate radical reactivity in Co-based hydrogenation catalysis. Metalation of previously reported dihydrazonopyrrole ligands with Co results in paramagnetic complexes, which are best described as having Co(II) oxidation states. These complexes catalytically hydrogenate olefins with low catalyst loadings under mild conditions (1 atm H 2 , 23 °C). Mechanistic, spectroscopic, and computational investigations indicate that this system goes through a radical hydrogen-atom transfer (HAT) type pathway that is distinct from classic organometallic mechanisms and is supported by the ability of the ligand to store H 2 . These results show how ancillary ligands can facilitate efficient catalysis, and furthermore how classic organometallic mechanisms for catalysis can be altered by the secondary coordination sphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Catalytic Hydrogenolysis of Polyethylene Under Reactive Separation

Deconstruction of polyolefins by catalytic hydrogenolysis is typically accompanied by the generation of undesired light gases. At reaction temperatures, the desired liquid products also tend to be volatile. Secondary cleavage of these liquid products contributes to light gas formation. The latter process was mitigated by reactive separation, continuously separating the liquid products from the catalyst throughout the experiment. At equivalent conversion, the yield and selectivity for oligomeric liquid species are increased under reactive separation, even though the carbon–carbon bond cleavage rate is slower than that in sealed experiments. More light gas is formed in the sealed reactor. Under 1 atm H 2 partial pressure, alkenes accompany the typical alkane hydrogenolysis products. Further, the alkene yield is higher, with greater selectivity for valuable α-olefins under reactive separation. These results provide the mechanistic insight that terminal alkenes are primary products of carbon–carbon bond cleavage during hydrogenolysis under experimental conditions, and secondary deconstruction of these species produces light gases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗