Search NASA⌕ Search

SEARCH · Search NASA

Results for “Oxide Phase Formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

NUCLEAR WASTE VITRIFICATION EFFICIENCY COLD CAP REACTIONS

The cost and schedule of nuclear waste treatment and immobilization are greatly affected by the rate of glass production. Various factors influence the performance of a waste-glass melter. One of the most significant, and also one of the least understood, is the process of batch melting. Studies are being conducted to gain fundamental understanding of the batch reactions, particularly those that influence the rate of melting, and models are being developed to link batch makeup and melter operation to the melting rate. Batch melting takes place within the cold cap, i.e., a batch layer floating on the surface of molten glass. The conversion of batch to glass consists of various chemical reactions, phase transitions, and diffusion-controlled processes. These include water evaporation (slurry feed contains as high as 60% water), gas evolution, the melting of salts, the formation of borate melt, reactions of borate melt with molten salts and with amorphous oxides (Fe{sub 2}O{sub 3} and Al{sub 2}O{sub 3}), the formation of intermediate crystalline phases, the formation of a continuous glass-forming melt, the growth and collapse of primary foam, and the dissolution of residual solids. To this list we also need to add the formation of secondary foam that originates from molten glass but accumulates on the bottom of the cold cap. This study presents relevant data obtained for a high-level-waste melter feed and introduces a one-dimensional (1D) mathematical model of the cold cap as a step toward an advanced three-dimensional (3D) version for a complete model of the waste glass melter. The 1D model describes the batch-to-glass conversion within the cold cap as it progresses in a vertical direction. With constitutive equations and key parameters based on measured data, and simplified boundary conditions on the cold-cap interfaces with the glass melt and the plenum space of the melter, the model provides sensitivity analysis of the response of the cold cap to the batch makeup and melter conditions. The model demonstrates that batch foaming has a decisive influence on the rate of melting. Understanding the dynamics of the foam layer at the bottom of the cold cap and the heat transfer through it appears crucial for a reliable prediction of the rate of melting as a function of the melter-feed makeup and melter operation parameters. Although the study is focused on a batch for waste vitrification, the authors expect that the outcome will also be relevant for commercial glass melting.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Regional-Scale Modeling Parameterizations for Secondary Organic Aerosol Formation from Isoprene Epoxydiols: Experimentally Based Evaluation and Optimization

Isoprene is an abundant volatile organic compound emitted from broadleaf forests. Under low nitric oxide concentrations, isoprene is photochemically oxidized to form gas-phase isoprene epoxydiols (IEPOX). In the presence of acidified sulfate aerosols, IEPOX enhances the secondary organic aerosol (SOA) formation. Predictions of IEPOX-SOA in regional-scale models, e.g., the Community Multiscale Air Quality Model (CMAQ), are uncertain due to homogeneous aerosol assumptions, underpredictions of water uptake (hygroscopicity), and aerosol surface area. Here, we used experimental measurements of IEPOX-SOA tracers, 2-methyltetrols (2-MT) and 2-methyltetrol sulfates (2-MTS), formed at initial IEPOX-to-inorganic sulfate ratios ranging from 1–10.5, at ∼50% relative humidity to constrain key IEPOX-SOA parameters: phase separation, organic shell diffusivity (D org ), acidity, hygroscopic growth, mass accommodation, and kinetics. The base CMAQ parametrization overpredicted experimental IEPOX-SOA with an average normalized mean bias (NMB average ) of 1.63. CMAQ with phase separation underpredicted IEPOX-SOA (NMB average = −0.71). Using the phase-separated model, CMAQ model performance was optimized (NMB average = 0.077) with an increased D org = 2 × 10 –16 m 2 s –1 and increased rate constants (k 2-MT = 1 × 10 –3 M 2 s –1 , k 2-MTS = 8.83 × 10 –3 M 2 s –1 ). The optimized model explicitly accounted for hygroscopic growth by utilizing experimentally derived growth rates, improving aerosol surface area predictions. Our model highlights the importance of the aerosol mixing state (homogeneous versus phase-separated), aerosol size dynamics, and hygroscopic growth in modeling heterogeneous reactive uptake of IEPOX.

aerosols↗

Gas Atomization Precursor Powder Approach for Simplified Large-Scale Production of Oxide Dispersion

Oxide dispersion strengthened (ODS) Ni-based alloys show promise for future energy applications that require high-temperature and oxidation resistant properties. Gas atomization reaction synthesis (GARS), with a mixed (Ar/O{sub 2}) atomization gas, is being developed as a simplified route for producing ODS precursor powders. Internal oxidation studies determined Ni-Cr-Y-(Hf or Ti) containing systems are suitable for production of ODS alloys via hot consolidation, which is used to encourage oxygen exchange between the less stable surface oxide phase and reactive alloying elements, resulting in highly stable nano-metric dispersoid formation. Size control of powders is key to optimizing microstructural and strengthening features. Aspiration and, previously, water modeling experiments were used to develop atomization process parameters that encourage controlled powder production while maintaining reduced operating costs when implemented on an industrial scale. For an increase in pour tube extension: aspiration base pressure at any given operating pressure was found to decrease while wake closure pressure was found to increase. Aspiration hysteresis was observed as recorded previously in the literature. Light emission was observed above wake closure pressures.

36 MATERIALS SCIENCE↗

Understanding the Synthesis of Supported Vanadium Oxide Catalysts Using Chemical Grafting

Abstract The complexity of variables during incipient wetness impregnation synthesis of supported metal oxides precludes an in‐depth understanding of the chemical reactions governing the formation of the dispersed oxide sites. This contribution describes the use of vapor phase deposition chemistry (also known as grafting) as a tool to systematically investigate the influence of isopropanol solvent on VO(O i Pr) 3 anchoring during synthesis of vanadium oxide on silica. The availability of anchoring sites on silica was found to depend not only on the pretreatment of the silica but also on the solvent present. H‐bond donors can reduce the reactivity of isolated silanols whereas disruption of silanol nests by H‐bond acceptors can turn unreactive H‐bonded silanols into reactive anchoring sites. The model suggested here can inform improved syntheses with increased dispersion of metal oxides on silica.

Love, Alyssa M.↗

Chemical preintercalation synthesis approach for the formation of new layered tungsten oxides

Tungsten oxide, WO 3 ·nH 2 O, is a unique layered oxide material that offers enhanced performance in electrochromic and energy storage applications. Herein, we report the formation of a new, never previously synthesized, Na-containing layered tungsten oxide phase, Na 0.20 WO 3 ·0.81H 2 O, using a chemical preintercalation approach. The structure and composition of this novel phase were investigated via microscopy, spectroscopy, and diffraction methods. Electrochemical cycling of Na 0.20 WO 3 ·0.81H 2 O electrodes revealed initial discharge capacities of 37.43 mAh g -1 , 480.8 mAh g -1 , and 253.2 mAh g -1 in aqueous H 2 SO 4 cells (potential window of - 0.2–0.8 V vs. Ag/AgCl), non-aqueous Li-ion cells (potential window of 0.1–4.0 V vs. Li/Li + ), and non-aqueous Na-ion cells (potential window of 0.1–4.0 V vs. Na/Na + ), respectively. Additionally, a reversible, pressure-induced color change from pale yellow to dark brown/black was observed for the Na 0.20 WO 3 ·0.81H 2 O sample when it was placed under pressures of 1000 psi or higher. Our results demonstrate the viability of chemical preintercalation synthesis approach to produce new oxide phases with interesting functional properties.

36 MATERIALS SCIENCE↗

Rehydration of metastudtite in the alteration kinetics of α– and β–U 3 O 8 in dilute aqueous solutions of hydrogen peroxide

The formation of alteration phases on uranium ore concentrates and used nuclear fuels under oxidizing conditions is key to understanding the potential mobility of radionuclides in the environment and designing optimal storage conditions of materials. However, the time-dependent distribution of alteration phases on α– and β–U 3 O 8 under oxidizing conditions has yet to be explored. Here, in this study, crystalline powders of α– and β–U 3 O 8 were submerged in aqueous solutions of hydrogen peroxide (1.6 × 10 −1 to 5.4 × 10 −5 M) with aliquots of solution and solid removed for analysis at 1, 8, 15, 22, 29, 36, 46, 58, 71, and 83 days. Within one day there is significant alteration of U 3 O 8 to the uranyl peroxide metastudtite, [(UO 2 )(O 2 )(H 2 O) 2 ], that is replaced by studtite, [(UO 2 )(O 2 )(H 2 O) 2 ]·2H 2 O, within a week regardless of the polymorph of U 3 O 8 or the initial concentration of H 2 O 2 in solution, as determined by partial least squares regression (PLSR) of Raman spectra collected from the solids. A dissolution/reprecipitation mechanism is proposed for both the alteration of U 3 O 8 to metastudtite and the subsequent alteration of both U 3 O 8 and metastudtite to studtite. The two polymorphs of U 3 O 8 exhibit similar rates and extents of alteration over time. The rehydration of metastudtite to studtite has not been previously reported and highlights the need for future work to determine the mechanism by which metastudtite is converted to studtite and what other conditions facilitate this rehydration.

Alteration of U3O8↗

Effect of Mo Dispersion Size and Water Vapor on Oxidation of Two-Phase Directionally Solidified NiAl-9Mo In-Situ Composites

Oxidation of two-phase NiAl-9Mo eutectics with 3 different growth rates/2nd phase Mo dispersion sizes were investigated at 900 C in air and air with 10% water vapor. Good oxidation resistance via alumina formation was observed in dry air, with Mo volatilization loss minimized by fine submicron Mo dispersions. However, extensive Mo volatilization and in-place internal oxidation of prior Mo phase regions was observed in wet air oxidation. Ramifications of this phenomenon for the development of multi-phase high-temperature alloys are discussed

Brady, Michael P↗

X-ray Diffraction Studies of Single-Crystal Materials for Broad Battery Applications

Single-crystal materials have attracted growing interest in battery research due to their well-defined crystallographic orientation, absence of grain boundaries, and enhanced mechanical and electrochemical stability. This Review provides a comprehensive overview of recent advances in the synthesis, structural evolution, and performance optimization of single-crystal electrodes and solid electrolytes. Particular focus is placed on the application of advanced X-ray diffraction (XRD) techniques, including operando synchrotron diffraction, reciprocal space mapping, and Bragg coherent diffraction imaging, which have enabled in-depth investigations of lattice strain, cation disorder, phase transitions, and defect formation. Representative case studies across Ni-rich layered oxides, spinel-type cathodes, and garnet-based electrolytes are examined to highlight the structural features unique to single crystals. Additionally, the synergistic integration of XRD with machine learning, tomography, and spectroscopy is discussed as a powerful direction for real-time analysis and predictive modeling. Furthermore, these insights provide critical guidance for the rational design of high-performance single-crystal materials in lithium, sodium, and solid-state battery systems.

25 ENERGY STORAGE↗

Optical and structural characterization of thermal oxidation effects of erbium thin films deposited by electron beam on silicon

Thermal oxidation effects on the structural, compositional, and optical properties of erbium films deposited on silicon via electron beam evaporation were analyzed by x-ray diffraction, x-ray photoelectron spectroscopy, Auger electron spectroscopy, and spectroscopic ellipsometry. A gradual rise in oxidation temperature from 700 to 900 deg. C resulted in a transition from ErO- to Er{sub 2}O{sub 3}-rich phase. Additional increase in oxidation temperature above 1000 deg. C led to the formation of erbium silicate due to further oxygen incorporation, as well as silicon out-diffusion from the substrate. A silicon oxide interfacial layer was also detected, with its thickness increasing with higher oxidation temperature. Additionally, film refractive index decreased, while its Tauc bandgap value increased from {approx}5.2 eV to {approx}6.4 eV, as the oxidation temperature was raised from 700 deg. C to above 900 deg. C. These transformations were accompanied by the appearance of an intense and broad absorption band below the optical gap. Thermal oxidation effects are discussed in the context of film structural characteristics and defect states.

36 MATERIALS SCIENCE↗

Thermochemical Compatibility and Oxidation Resistance of Advanced LWR Fuel Cladding

We assessed the thermochemical compatibility of potential replacement cladding materials for zirconium alloys in light water reactors. Considered were FeCrAl steel (similar to Kanthal APMT), Nb-1%Zr (similar to PWC-11), and a hybrid SiC-composite with a metallic barrier layer. The niobium alloy was also seen as requiring an oxidation protective layer, and a diffusion silicide was investigated. Metallic barrier layers for the SiC-composite reviewed included a FeCrAl alloy, Nb-1%Zr, and chromium. Thermochemical calculations were performed to determine oxidation behavior of the materials in steam, and for hybrid SiC-composites possible interactions between the metallic layer and SiC. Additionally, experimental exposures of SiC-alloy reaction couples at 673K, 1073K, and 1273K for 168 h in an inert atmosphere were made and microanalysis performed. Whereas all materials were determined to oxidize under higher oxygen partial pressures in the steam environment, these varied by material with expected protective oxides forming. Finally, the computed and experimental results indicate the formation of liquid phase eutectic in the FeCrAl-SiC system at the higher temperatures.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Structural and optical characterization of DyAlO{sub 3} perovskite powders obtained by combustion synthesis

Phase pure Dysprosium monoaluminate has been prepared from Dysprosium oxide and Aluminium nitrate by auto-ignition citrate complex combustion process. The phase formation has been investigated using X-ray diffraction analysis (XRD), Thermo-Gravimetric/Differential Thermal Analysis (TGA/DTA) and Fourier Transform Infrared (FT-IR) spectroscopy analysis. X-ray diffraction analysis (XRD) revealed that DyAlO{sub 3} has an orthorhombic perovskite structure. From Transmission Electron Microscopy (TEM) studies, average particle-size has been found to be as low as 45 nm. The absorption spectrum of the DyAlO{sub 3} nanoparticles shows characteristic absorption bands of Dy atom. The optical band gap of the material was found to be 5.15 eV, which corresponds to direct allowed transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In operando studies of CO oxidation on epitaxial SrCoO 2.5+δ thin films

The high abundance and fast kinetics of select transition metal oxide catalysts are attractive features for many chemical and electrochemical device applications. However, the activity of such catalysts can be accompanied by phase instabilities that prevent their widespread usage. Furthermore, complexities associated with variations in phase behavior and oxygen stoichiometry have hindered studies on the true origins of catalytic activity. Here, we explore the interactions between activity, phase stability, and microstructure using in operando synchrotron X-ray techniques and gas chromatography/mass spectroscopy (GCMS) to probe the behavior of model SrCoO 2.5+δ (SCO) catalysts. Pulsed laser deposition was used to prepare SCO thin films on (001) SrTiO 3 , (111) SrTiO 3 , and pseudocubic (001) DyScO 3 substrates. The GCMS catalytic measurements were performed with a custom-built microreactor compatible with a synchrotron X-ray diffractometer at the Advanced Photon Source. The activity for carbon monoxide oxidation was determined as a function of temperature from 500 °C to 800 °C. We show that the SrCoO 2.5+δ films are active for CO oxidation, most likely by direct reaction with lattice oxygen; consequently, the activity was observed to increase as the films become less stable, with the most active film being the one exhibiting the lowest surface and crystal quality. All films decompose at high temperatures, with in operando diffraction indicating the gradual formation of Sr-rich hexagonal and CoO phases. We find that real-time studies of model oxide systems with synchrotron X-rays is a powerful means of gaining insight into the varied processes taking place at catalytic surfaces.

36 MATERIALS SCIENCE↗

Observation of transient iron(II) formation in dye-sensitized iron oxide nanoparticles by time-resolved x-ray spectroscopy.

The reduction of ferric iron in solid phase minerals leads to the mobilization of ferrous iron in the environment and is thus a crucial component of the global iron cycle. Despite the importance of this process, a mechanistic understanding of the structural and chemical changes that are caused by this electron transfer reaction is not established because the speed of the fundamental chemical steps renders them inaccessible to conventional study. Ultrafast time-resolved X-ray spectroscopy is a technique that can overcome this limitation and measure changes in oxidation state and structure occurring during chemical reactions that can be initiated by a fast laser pulse. We use this approach with {approx}100 ps resolution to monitor the speciation of Fe atoms in iron oxide nanoparticles following photoinduced electron transfer from a surface-bound photoactive dye molecule. These data represent the first direct real-time observation of the dynamics of ferrous ion formation and subsequent reoxidation in iron oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Time-resolved imaging of atoms and molecules in laser-produced uranium plasmas

Gas-phase oxidation of uranium (U), plume chemistry, and its impact on optical emission features of the uranium plasma are investigated. Plasmas were produced via nanosecond laser ablation of a natural uranium target in a chamber where uranium oxidation was controlled by varying the oxygen partial pressure within argon cover gas. Monochromatic imaging of uranium atoms and monoxide molecules was performed using narrowband optical filters, which clearly reveals the spatio-temporal evolution of these species in the plasma. Uranium oxides are found to be formed at the plasma edges, where lower temperatures favor molecular recombination. Segregation between the distribution of uranium atoms and monoxide species is observed at later times of plasma evolution, and is more apparent at lower oxygen partial pressures. At higher oxygen partial pressures, significant variation in plume morphology is noticed for UO species, which is attributed to higher rate of oxide (UxOy) formation at the plume edges. The monochromatic images of U atoms and molecules and corresponding spectral features at various oxygen partial pressures presented here provide a unique insight into gas-phase, high-temperature uranium oxidation, and its chemistry and have implications for a wide range of nuclear applications, from stand-off detection of radioisotopes to forensics and safeguards.

(140.3440) Laser-induced breakdown, (280.4788) Opt↗

Elucidating the role of Cr migration in Ni-Cr exposed to molten FLiNaK via multiscale characterization

Structural materials used in nuclear reactor environments are subjected to coupled extremes such as high temperature, irradiation, and corrosion which act in concert to degrade their functional performance. Connecting alloy microstructure such as grain boundaries, and accumulating point defects with corrosion attack and pore morphology is critical to understanding underlying mechanisms. We uncover the compositional variations and morphology at multiple length scales in corrosion-damaged Ni-Cr alloy after exposure to oxidants in molten fluoride salts. A complex network of dense corrosion pores is detected by surface-level SEM observations. The corrosion pores take on a 1-dimensional morphology and are enriched with Ni and depleted of Cr 1–5 µm from the pore surface. STEM-EDS and 4D-STEM strain maps acquired simultaneously highlight the local variations in composition and structure of a ≤ 200 nm Cr-rich layer identified from a cross-section taken at the bottom of an isolated corrosion pore between the Ni-Cr alloy matrix and the embedded salt. However, the absence of an observed interface between the Ni-Cr alloy matrix and the FCC-structured Cr-rich layer suggests that Cr plating from the salt did not transpire. These findings support a proposed Cr lattice diffusion mechanism rather than Cr-precipitation from the salt to accommodate temperature transient conditions during sample cooling. Through the development of a 1D phase field model, these results are rationalized by formation energies for the Ni- and Cr-oxidation into the molten salt. This study reveals the locally altered microstructure caused by high temperature corrosion in non-steady-state molten salt nuclear reactor environments.

36 MATERIALS SCIENCE↗

Sulfur Tolerant Subnanometer Fe/Alumina Catalysts for Propane Dehydrogenation

A series of Al 2 O 3 -supported Fe-containing catalysts were synthesized by incipient wetness impregnation. The iron surface density was varied from 1 to 13 Fe atoms/nm 2 spanning submonolayer to above-monolayer coverage. Here, the resulting supported Fe-catalysts were characterized by N 2 physisorption, ex situ X-ray diffraction (XRD), X-ray pair distribution function (PDF), X-ray absorption spectroscopy (XAS), aberration corrected scanning transmission electron microscopy (AC-STEM) and chemically probed by hydrogen temperature-programmed reduction (H 2 -TPR). The results suggest that over this entire range of loadings, Fe was present as dispersed species, with only a very small fraction of Fe 2 O 3 aggregates, at the highest Fe loading in oxide phase. The in situ sulfidation of Fe/Al 2 O 3 resulted in the formation of a highly active and selective PDH catalyst. The highest activity with 52% propane conversion and ~99% propylene selectivity at 560 °C was obtained for the 6.4 Fe/Al 2 O 3 -S catalyst, suggesting that this is the highest amount of Fe that could be fully dispersed on the support in sulfided form. XRD and AC-STEM indicated the absence of any crystalline iron sulfide aggregates after sulfidation and reaction. H 2 -TPR results indicated that the amount of the reducible Fe sites in the sulfided catalyst remained constant above monolayer coverage, and increasing loading did not increase the number of reducible Fe sites. Consistent with these results, the reactivity per gram of catalyst showed no increase with Fe loading above monolayer coverage, suggesting that additional Fe remains conformal to the alumina surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and Characterization of Nanoceramics for Solid Oxide Fuel Cells

Precursor powders in the ZrO{sub 2}–HfO{sub 2}–Y{sub 2}O{sub 3}–CeO{sub 2}, In{sub 2}O{sub 3}–ZrO{sub 2}, and NiO–Nd{sub 2}O{sub 3} systems for components of solid oxide fuel cells have been prepared by liquid-phase synthesis. We have determined formation conditions and the particle size of ZrO{sub 2-} and In{sub 2}O{sub 3-}based solid solutions and neodymium nickelate (Nd{sub 2}NiO{sub 4}), demonstrated the feasibility of producing nanocrystalline powders (10–30 nm) of tailored chemical composition in the temperature range 500–900°C, and optimized powder consolidation conditions. Nanoceramics with a crystallite size from 60 to 90 nm have been obtained and their microstructure and phase composition have been investigated. We have studied the electrical properties of the ZrO{sub 2-} and In{sub 2}O{sub 3-}based solid solutions and the Nd{sub 2}NiO{sub 4} compound and established the range of their electrical conductivity at temperatures from 300 to 1000°C: 2.27 × 10{sup –3} to 2.51 S/cm for the ZrO{sub 2}-based solid solution, 8.91 × 10{sup 1} to 6.59 × 10{sup 3} S/cm for the In{sub 2}O{sub 3}-based solid solution, and 3.98 × 10{sup 2} to 5.02 × 10{sup 2} S/cm for Nd{sub 2}NiO{sub 4}.

36 MATERIALS SCIENCE↗