Search NASA⌕ Search

SEARCH · Search NASA

Results for “PEROXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Evidence of lipid peroxidation and protein phosphorylation in cells upon oxidative stress photo generated by fullerols

An oxidative stress (OS) state is characterized by the generation of Reactive Oxygen Species (ROS) in a biological system above its capacity to counterbalance them. Exposure to OS induces the accumulation of intracellular ROS, which in turn causes cell damage in the form of protein, lipid, and/or DNA oxidations. Such conditions are believed to be linked to numerous diseases or simply to the ageing of tissues. However, the controlled generation of ROS via photosensitizing drugs or photosensitizers (PS) is now widely used to treat various tumors and other infections. Here we present a method to track the chemical changes in a cell after exposure to oxidative stress. OS is induced via fullerols, a custom made water soluble derivative of fullerene (C{sub 60}), under visible light illumination. Synchrotron-based Fourier Transform InfraRed Microspectroscopy (S-FTIRM) was used to assess the chemical makeup of single cells after OS exposure. Consequently, a chemical fingerprint of oxidative stress was probed in this study through an increase in the bands linked with lipid peroxidation (carbonyl ester group at 1740 cm{sup -1}) and protein phosphorylation (asymmetric phosphate stretching at 1240 cm{sup -1}).

59 BASIC BIOLOGICAL SCIENCES↗

Investigation of the alkaline hydrogen peroxide pretreatment: From cellulose saccharification to lignin isolation

Alkaline hydrogen peroxide (AHP) pretreatment, a green and effective technology for biomass fractionation, was studied to overcome the recalcitrance of bamboo for lignin isolation and facilitating enzymatic saccharification. In order to explore the impact of AHP pretreatment on the cellulose saccharification of bamboo, the glucan/xylan recovery, lignin removal, and structural properties of solid substrate were investigated in this research. AHP pretreatment at 90 °C for 60 min with 3.0 % H 2 O 2 resulted in the maximum glucan/xylan hydrolysis yield reaching 90.62 % and 88.30 %, respectively. Specially, for the first time, the recovered lignin from the AHP liquid possesses up to 59.84/100Ar of β-O-4 linkages, abundant ferulic acid (FA), and p-coumarate (pCE) structures, as well as a homogeneous molecular structure with high purity (84.04%-96.20%) and preferable antioxidant activities (IC50: 0.015–0.018 mg/mL). Finally, these results provided theoretical support for the comprehensive valorization of lignocellulose, which is favorable for achieving viable biorefineries.

09 BIOMASS FUELS↗

Peroxide-treated metal-organic framework templated adsorbents for remediation of high level nuclear waste

Remediation of legacy nuclear waste is one of the greatest challenges faced by the US Department of Energy, with projected cleanup efforts requiring over five decades and hundreds of billions of dollars. New materials are necessary to accelerate waste processing, achieving time and financial savings. Herein we report a peroxide treatment to a Ti metal-organic framework (MOF) and related MOF-templated adsorbents. Furthermore, the resulting materials displayed exceptional affinity for Am(III), achieving distribution coefficients in excess of 10 5 mL/g, and out-performing state-of-the-art benchmarks monosodium titanate (MST) and peroxo-treated modified MST (mMST) for removal of 85 Sr(II) and 239, 240 Pu(IV) from legacy nuclear waste simulant.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Surface Processes Control the Fate of Reactive Oxidants Generated by Electrochemical Activation of Hydrogen Peroxide on Stainless-Steel Electrodes

Low-cost stainless-steel electrodes can activate hydrogen peroxide (H 2 O 2 ) by converting it into a hydroxyl radical ( • OH) and other reactive oxidants. At an applied potential of +0.020 V, the stainless-steel electrode produced • OH with a yield that was over an order of magnitude higher than that reported for other systems that employ iron oxides as catalysts under circumneutral pH conditions. Decreasing the applied potential at pH 8 and 9 enhanced the rate of H 2 O 2 loss by shifting the process to a reaction mechanism that resulted in the formation of an Fe(IV) species. Significant metal leaching was only observed under acidic pH conditions (i.e., at pH <6), with the release of dissolved Fe and Cr occurring as the thickness of the passivation layer decreased. Despite the relatively high yield of • OH production under circumneutral pH conditions, most of the oxidants were scavenged by the electrode surface when contaminant concentrations comparable to those expected in drinking water sources were tested. The stainless-steel electrode efficiently removed trace organic contaminants from an authentic surface water sample without contaminating the water with Fe and Cr. With further development, stainless-steel electrodes could provide a cost-effective alternative to other H 2 O 2 activation processes, such as those by ultraviolet light.

42 ENGINEERING↗

Gamma-Ray-Induced Formation of Uranyl Peroxide Cage Clusters

Aqueous solutions of lithium uranyl triperoxide, Li 4 [UO 2 (O 2 ) 3 ] (LiUT), were irradiated with gamma rays at room temperature and found to form the uranyl peroxide cage cluster, Li 24 [(UO 2 )(O 2 )(OH)] 24 (Li–U 24 ). Raman spectroscopy and 18 O labeling were used to identify the Raman-active vibrations of LiUT. With these assignments, the concentration of LiUT was tracked as a function of radiation dose. A discrepancy between monomer removal and cluster formation suggests that the reaction proceeds by the assembly of an intermediate. Non-negative matrix factorization was used to separate Raman spectra into components and resulted in the identification of a unique intermediate species. Much of the conversion appears to be driven by water radiolysis products, particularly the hydroxyl radical. Furthermore, this differs from the 18 O-labeled copper-catalyzed formation of U 24 , which progresses at a steady rate with no observation of intermediates. Li–U 24 in solution decomposes at high radiation doses resulting in a solid insoluble product similar to Na-compreignacite, Na 2 (UO 2 ) 6 O 4 (OH) 6 ·7H 2 O, which contains uranyl oxyhydroxy sheets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dehydration of the Uranyl Peroxide Studtite, [UO 2 (η 2 -O 2 )(H 2 O) 2 ]·2H 2 O, Affords a Drastic Change in the Electronic Structure: A Combined X-ray Spectroscopic and Theoretical Analysis

The dehydration of studtite, [UO 2 (2-O 2 )(H 2 O)2]·2H 2 O, to metastudtite, [UO 2 (2-O 2 )(H 2 O) 2 ], uranyl peroxide minerals that are major oxidative alteration phases of UO2 under conditions of geological storage, has been studied using X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy. XPS of the U 4f region shows small but significant differences between studtite and metastudtite, with the 4f binding energy of studtite the highest reported for a uranyl mineral studied by this technique. Further information on the changes in the electronic structure was elucidated using U M4-edge High Energy Resolution XANES (HR-XANES) spectroscopy, which directly probes f-orbital states. The transition from the 3d to the 5f* orbital is sensitive to variations of the U=Oaxial bond length and to changes in the bond covalency. We report evidences that the covalence in the uranyl fragment decreases upon dehydration. Photoluminescence spectroscopy at near liquid helium temperatures reveals significant spectral differences between the two materials, correlating with the X-ray spectroscopy results. A theoretical investigation has been conducted on the structures of both studtite and metastudtite and benchmarked to the HR-XANES spectra. These illustrate the sensitivity of the 3d to the 5f * transition towards U=Oaxial bond variation.

Environmental Molecular Sciences Laboratory↗

Evidence of a Nonphotochemical Mechanism for the Solid-State Formation of Uranyl Peroxide

Here, we have demonstrated the solid-state formation of a uranyl peroxide (UP) species from hydrated uranyl fluoride via a uranyl hydroxide intermediate, the first observation of a UP species formed in a solid-state reaction. Water vapor pressure is shown to be a driving factor of both the loss of fluorine and the subsequent formation of peroxo units. We have ruled out a photochemical mechanism for formation of the UP species by demonstrating that the same reaction occurs in the dark. A radiolytic mechanism is unlikely because of the low radioactivity of the sample material, suggesting the existence of a novel UP formation mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energetic Trends in Monomer Building Blocks for Uranyl Peroxide Clusters

Here, the uranyl triperoxide anionic monomer is a fundamental building block for uranyl peroxide polyoxometalate capsules. The reaction pathway from the monomer to the capsule can be greatly altered by the counterion: both the reaction rate and the resulting capsule structure. We synthesized and characterized uranyl triperoxides Mg 2 UO 2 (O 2 ) 3 ·13H 2 O (MgUT), Ca 2 UO 2 (O 2 ) 3 ·9H 2 O (CaUT), Sr 2 UO 2 (O 2 ) 3 ·9H 2 O (SrUT), and K 4 UO 2 (O 2 ) 3 ·3H 2 O (KUT) and compared their thermodynamic stabilities. The enthalpies of formation from oxides and elements of these compounds were calculated by thermochemical cycles from measurements by high temperature oxide melt drop solution calorimetry. Their formation enthalpies from oxides become more negative linearly as a function of the increasing basicity of the respective oxides on the Smith scale. This relationship holds for previously Li and Na analogues. Further affirming the trend, Δ H f,ox of MgUT departs from linearity, due to the distinct bonding environment of Mg 2+ , as compared to the other alkalis and alkaline earths in the series.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of Cation-Induced Conformational Changes in Nanometer-Sized Uranyl Peroxide Clusters

Conformational changes of the pyrophosphate (Pp)-functionalized uranyl peroxide nanocluster [(UO 2 ) 24 (O 2 ) 24 (P 2 O 7 ) 12 ] 48– ({U 24 Pp 12 }), dissolved as a Li/Na salt, can be induced by the titration of alkali cations into solution. The most symmetric conformer of the molecule has idealized octahedral ( O h ) molecular symmetry. One-dimensional 31 P NMR experiments provide direct evidence that both K + and Rb + ions trigger an O h -to- D 4 h conformational change within {U 24 Pp 12 }. Variable-temperature 31 P NMR experiments conducted on partially titrated {U 24 Pp 12 } systems show an effect on the rates; increased activation enthalpy and entropy for the D 4 h -to- O h transition is observed in the presence of Rb + compared to K + . Two-dimensional, exchange spectroscopy 31 P NMR revealed that magnetization transfer links chemically unique Pp bridges that are present in the D 4 h conformation and that this magnetization transfer occurs via a conformational rearrangement mechanism as the bridges interconvert between two symmetries. The interconversion is triggered by the departure and reentry of K (or Rb) cations out of and into the cavity of the cluster. This rearrangement allows Pp bridges to interconvert without the need to break bonds. Cs ions exhibit unique interactions with {U 24 Pp 12 } clusters and cause only minor changes in the solution 31 P NMR signatures, suggesting that O h symmetry is conserved. Single-crystal X-ray diffraction measurements reveal that the mixed Li/Na/Cs salt adopts D 2 h molecular symmetry, implying that while solvated, this cluster is in equilibrium with a more symmetric form. Thus, these results highlight the unusually flexible nature of the actinide-based {U 24 Pp 12 } and its sensitivity to countercations in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Active Thermochemical Tables: The Adiabatic Ionization Energy of Hydrogen Peroxide

The adiabatic ionization energy of hydrogen peroxide (HOOH) is investigated, both by means of theoretical calculations and theoretically-assisted reanalysis of previous experimental data. Values obtained by three different approaches: 10.638 ± 0.012 eV (purely theoretical determination), 10.649 ± 0.005 eV (reanalysis of photoelectron spectrum) and 10.645 ± 0.010 eV (reanalysis of photoionization spectrum) are in excellent mutual agreement. Further refinement of the latter two values to account for asymmetry of the rotational profile of the photoionization origin band leads to a reduction of 0.007 ± 0.006 eV, which tends to bring them into even closer alignment with the purely theoretical value. As a result, detailed analysis of this fundamental quantity by the Active Thermochemical Tables (ATcT) approach, using the present results and extant literature, gives a final estimate of 10.641 ± 0.006 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prelithiation of Lithium Peroxide for Silicon Anode: Achieving a High Activation Rate

The use of lithium peroxide (Li2O2) as a cost-effective low-weight prelithiation cathode additive was successfully demonstrated. Through a series of studies on the chemical stability of Li2O2 and the activation process of Li2O2 on the cathode, we revealed that Li2O2 is more compatible with conventional electrolyte and cathode laminate slurry than lithium oxide. Due to the significantlysmaller size of commercial Li2O2, it can beused directly as a cathode additive. Moreover, the activation of Li2O2 on the cathode leads to the impedance growthof the cathode possibly resulting from the release of dioxygen andevacuation of Li2O2 inside the cathode. Withthe introduction of a new Li2O2 spread-coatingtechnique on the cathode, the capacity loss was suppressed. Si||NMCfull cells using Li2O2 spread-coated cathodedemonstrated a highly promising activation rate of Li2O2 and significantly enhanced specific capacity and cyclingstability compared to the uncoated full cells.

cathode additive↗

High-Capacity Sodium Peroxide Based Na–O 2 Batteries with Low Charge Overpotential via a Nanostructured Catalytic Cathode

The superoxide based Na-O 2 battery has circumvented the issue of large charge overpotential in Li-O-2 batteries; however, the one-electron process leads to limited capacity. Here in this paper, a sodium peroxide based low-overpotential (similar to 0.5 V) Na-O 2 battery with a capacity as high as 7.5 mAh/cm 2 is developed with Pd nanoparticles as catalysts on the cathode.

25 ENERGY STORAGE↗

Recovery of p -Hydroxybenzoic Acid from Cu-Catalyzed Alkaline Hydrogen Peroxide Pretreatment of Hybrid Poplar

p-Hydroxybenzoic acid (pHBA) is present in some hardwood biomass feedstocks as an ester attached to the polymeric lignin subunits. Here, we report the isolation and recovery of pHBA from alkaline liquor waste streams obtained from fractionation of hybrid poplar using the “Cu-AHP process”. This process features two stages: alkaline pre-extraction (AP) of the biomass and copper-catalyzed alkaline hydrogen peroxide pretreatment. On a biomass scale of 100 g, 0.5 g of pHBA with a purity of 96% was obtained after decolorization and crystallization. The scalability of the purification process was demonstrated by using liquor obtained from the first-stage AP with 900 g of poplar biomass to afford 3.5 g of crystalline pHBA with 97% purity. Altogether, these results show that pHBA may be isolated and purified from waste streams generated in the two-stage Cu-AHP process without any alteration of the process conditions or impact on carbohydrate and lignin fractionation.

09 BIOMASS FUELS↗

All-Weather Hydrogen Peroxide-Based Decontamination of CBRN Contaminants

A hydrogen peroxide-based decontaminant, Decon Green, is efficacious for the decontamination of chemical agents VX (S-2-(diisopropylamino)ethyl O-ethyl methylphosphonothioate), GD (Soman, pinacolyl methylphosphonofluoridate), and HD (mustard, bis(2-chloroethyl) sulfide); the biological agent anthrax (Bacillus anthracis); and radiological isotopes Cs-137 and Co-60; thus demonstrating the ability of this decontamination approach to ameliorate the aftermath of all three types of weapons of mass destruction (WMD). Reaction mechanisms afforded for the chemical agents are discussed as are rationales for the enhanced removal efficacy of recalcitrant 60Co on certain surfaces. Decontaminants of this nature can be deployed, and are effective, at very low temperatures (-32 °C), as shown for studies done with VX and HD simulants, without the need for external heat sources. Finally, the efficacy of a lower-logistics, dry decontaminant powder concentrate (utilizing the solid active-oxygen compounds peracetyl borate and Peroxydone) which can be reconstituted with water in the field prior to use, is presented.

08 HYDROGEN↗

In Situ Structural Observation of a Substrate- and Peroxide-Bound High-Spin Ferric-Hydroperoxo Intermediate in the P450 Enzyme CYP121

The P450 enzyme CYP121 from Mycobacterium tuberculosis catalyzes a carbon–carbon (C–C) bond coupling cyclization of the dityrosine substrate containing a diketopiperazine ring, cyclo(l-tyrosine-l-tyrosine) (cYY). An unusual high-spin (S = 5/2) ferric intermediate maximizes its population in less than 5 ms in the rapid freeze-quenching study of CYP121 during the shunt reaction with peracetic acid or hydrogen peroxide in acetic acid solution. Here, we show that this intermediate can also be observed in the crystalline state by EPR spectroscopy. By developing an on-demand-rapid-mixing method for time-resolved serial femtosecond crystallography with X-ray free-electron laser (tr-SFX-XFEL) technology covering the millisecond time domain and without freezing, we structurally monitored the reaction in situ at room temperature. After a 200 ms peracetic acid reaction with the cocrystallized enzyme–substrate microcrystal slurry, a ferric-hydroperoxo intermediate is observed, and its structure is determined at 1.85 Å resolution. The structure shows a hydroperoxyl ligand between the heme and the native substrate, cYY. The oxygen atoms of the hydroperoxo are 2.5 and 3.2 Å from the iron ion. The end-on binding ligand adopts a near-side-on geometry and is weakly associated with the iron ion, causing the unusual high-spin state. This compound 0 intermediate, spectroscopically and structurally observed during the catalytic shunt pathway, reveals a unique binding mode that deviates from the end-on compound 0 intermediates in other heme enzymes. The hydroperoxyl ligand is only 2.9 Å from the bound cYY, suggesting an active oxidant role of the intermediate for direct substrate oxidation in the nonhydroxylation C–C bond coupling chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable Pentagonal Layered Palladium Diselenide Enables Rapid Electrosynthesis of Hydrogen Peroxide

Electrosynthesis of hydrogen peroxide (H 2 O 2 ) via the two-electron oxygen reduction reaction (2e – ORR) is promising for various practical applications, such as wastewater treatment. However, few electrocatalysts are active and selective for 2e – ORR yet are also resistant to catalyst leaching under realistic operating conditions. Here, a joint experimental and computational study reveals active and stable 2e – ORR catalysis in neutral media over layered PdSe 2 with a unique pentagonal puckered ring structure type. Computations predict active and selective 2e – ORR on the basal plane and edge of PdSe 2 , but with distinct kinetic behaviors. Further, electrochemical measurements of hydrothermally synthesized PdSe 2 nanoplates show a higher 2e – ORR activity than other Pd–Se compounds (Pd 4 Se and Pd 17 Se 15 ). PdSe 2 on a gas diffusion electrode can rapidly accumulate H 2 O 2 in buffered neutral solution under a high current density. The electrochemical stability of PdSe 2 is further confirmed by long device operational stability, elemental analysis of the catalyst and electrolyte, and synchrotron X-ray absorption spectroscopy. This work establishes a new efficient and stable 2e – ORR catalyst at practical current densities and opens catalyst designs utilizing the unique layered pentagonal structure motif.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoarchitectonic Semiconductor–Bio Hybrid Systems with Enhanced Charge Transfer for Hydrogen Peroxide Production

Nanoarchitectonics offers a systematic approach to creating an artificial framework by integrating different multiscale components such as semiconductor lattices and biological substances. However, most nanoarchitectonic abiotic-biotic hybrid systems have intrinsic limitations in imparting nonequilibrium biological features into semiconductor lattices at the nanoscale. Here, in this study, we report a new nanoarchitectonic system integrating bismuth oxychloride (BiOCl) nanosheets with purple membrane (PM) patches. PM is an archaeal subcellular fraction capable of unidirectionally transferring photogenerated charge carriers to its surroundings at the nanoscale independent of archaeal metabolism and retaining this dynamic functionality after isolation from living archaea. Microscopy, spectroscopy, electrochemical, and synchrotron X-ray scattering analyses verify that the nanoarchitectonic hybridization between BiOCl and PM generates a vertical heterostructure, thereby enhancing photogenerated charge-carrier dynamics and enabling the associated photocatalytic capacity. The resulting PM-BiOCl hybrid nanosheets efficiently convert dioxygen into hydrogen peroxide through a two-electron and two-proton transfer process under ambient conditions while simultaneously converting ethylene glycol into value-added chemicals. This study presents a nanoarchitectonic approach that leverages the photogenerated charge-carrier dynamics of the archaeal subcellular fractions to modulate the optoelectronic and catalytic capacity limitations of semiconductors.

catalysis↗

Effect of the size-selective silver clusters on lithium peroxide morphology in lithium–oxygen batteries

Lithium–oxygen batteries have the potential needed for long-range electric vehicles, but the charge and discharge chemistries are complex and not well understood. The active sites on cathode surfaces and their role in electrochemical reactions in aprotic lithium–oxygen cells are difficult to ascertain because the exact nature of the sites is unknown. In this paper, we report the deposition of subnanometre silver clusters of exact size and number of atoms on passivated carbon to study the discharge process in lithium–oxygen cells. The results reveal dramatically different morphologies of the electrochemically grown lithium peroxide dependent on the size of the clusters. This dependence is found to be due to the influence of the cluster size on the formation mechanism, which also affects the charge process. Finally, the results of this study suggest that precise control of subnanometre surface structure on cathodes can be used as a means to improve the performance of lithium–oxygen cells.

25 ENERGY STORAGE↗