Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOTOELECTRIC EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Herschel Extreme Lensing Line Observations: [CII] Variations in Galaxies at Redshifts z=1-3*

We observed the [C II] line in 15 lensed galaxies at redshifts 1 less than z less than 3 using HIFI on the Herschel Space Observatory and detected 14/15 galaxies at 3sigma or better. High magnifications enable even modestly luminous galaxies to be detected in [C II] with Herschel. The [C II] luminosity in this sample ranges from 8 × 10(exp 7) solar luminosity to 3.7 × 10(exp 9) solar luminosity (after correcting for magnification), confirming that [C II] is a strong tracer of the ISM at high redshifts. The ratio of the [C II] line to the total far-infrared (FIR) luminosity serves as a measure of the ratio of gas to dust cooling and thus the efficiency of the grain photoelectric heating process. It varies between 3.3% and 0.09%. We compare the [C II]/FIR ratio to that of galaxies at z = 0 and at high redshifts and find that they follow similar trends. The [C II]/FIR ratio is lower for galaxies with higher dust temperatures. This is best explained if increased UV intensity leads to higher FIR luminosity and dust temperatures, but gas heating does not rise due to lower photoelectric heating efficiency. The [C II]/FIR ratio shows weaker correlation with FIR luminosity. At low redshifts highly luminous galaxies tend to have warm dust, so the effects of dust temperature and luminosity are degenerate. Luminous galaxies at high redshifts show a range of dust temperatures, showing that [C II]/FIR correlates most strongly with dust temperature. The [C II] to mid-IR ratio for the HELLO sample is similar to the values seen for low-redshift galaxies, indicating that small grains and PAHs dominate the heating in the neutral ISM, although some of the high [CII]/FIR ratios may be due to turbulent heating.

Malhotra, Sangeeta↗

Operation Closed-Loop Observation Scheduling and Execution

In this paper, we present a fully operational system that performs closed-loop observation scheduling and execution and has been in daily use on an automatic photoelectric telescope at the Fairborn Observatory on Mt. Hopkins in Arizona. The scheduler is part of the Associate Principal Astronomer system that also provides tools that enable the effective management of automatic telescopes. The paper describes the flexible schedule representation used and describes how the uncertainties and errors inherent in the domain are handled.

Bresina, John↗

Concerning the Charging of an Exploration Craft on and near a Small Asteroid

Introduction: An object immersed in an airless plasma environment will experience a natural process of surface charging in order to acheieve current balance, or zero net electric current to the object. It has been shown in recent computer simulations that the small-body plasma environment is very complex [1], considering effects of photoemission, topography, and formation of a plasma wake. For this work we consider an exploration craft (or astronaut) immersed within a plasma environment near an asteroid, which exhibits widely varying solar wind and photoelectric particle fluxes and continuously evolving illumination conditions. Objective: We aim to determine how an explo-ration craft or astronaut suit accumulates charge while located in the "nightside" asteroid wake where the particle fluxes are reduced, and in the dayside near-surface photoelectron sheath, by combining an object charging model [2] with kinetic simulations of a near-asteroid plasma environment [1]. We consider an astronaut floating near the asteroid while not in contact with the surface, as well as an astronaut moving along the surface using their hands/gloves to crawl along. Results: The modeling results suggest that remediation of triboelectric charge via accumulation of plasma currents is an important factor to consider when designing future NEA mission infrastructure, especially if repeated and frequent contact with the surface is planned. In shadowed regions such as the location shown in Fig. 1a, the plasma currents are so low (and the effective charge-remediation timescale so long, e.g. minutes to hours) that repeated contact with the surface tribocharges the glove in an uncontrollable fashion, as shown for two representative electron temperatures in Fig. 2a. The resulting buildup of significant negative charge would eventually initiate some other "current of last resort" [4] such as transport of positively-charged dust, field-emission from the glove, or significant alteration of environmental ion currents within the wake. In contrast, the few-meters-thick dayside photoelectron sheath in which the astronaut of Fig. 1b is immersed in is so rich in electrons (and hence so electrically conductive) that accumulated tribocharge dissipates almost instantaneously (e.g. in less than a ms) as shown in Fig. 2b. As our model astronaut orbits the NEA they would experience plasma currents and associated charge re-mediation times spanning many orders of magnitude, and the fusion between our numerical models provides a detailed understanding of the charging hazards possibly associated with contact-based NEA exploration.

Asteroid↗

Extreme ultraviolet spectrograph ATM experiment S082B

The extreme-ultraviolet double-dispersion photographic spectrograph for the Apollo Telescope Mount (ATM) experiment S082B on Skylab is described. Novel features were the use of a predisperser grating with a ruling whose spacing varied approximately linearly with distance for the purpose of increasing the instrument speed by reducing the astigmatism and a photoelectric servosystem to stabilize to 1 sec of arc the solar image at various near-limb positions. The 970-3940-A range was covered in two sections with effective resolving power of approximately 30,000 from 1100 A to 1970 A. The spatial resolution was 2 x 60 solar sec of arc. During the Skylab mission 6400 exposures were made with the instrument pointed by an astronaut at selected and recorded solar positions.

Bartoe, J.-D. F.↗

Detection of Anomalies in the UV/Vis Reflectances from the Ozone Monitoring Instrument

Various instrumental or geophysical artifacts, such as saturation, stray light, or obstruction of light (either coming from the instrument or related to solar eclipses), negatively impact satellite measured ultraviolet and visible Earthshine radiance spectra and downstream retrievals of atmospheric and surface properties derived from these spectra. In addition, excessive noise such as from cosmic ray impacts, prevalent within the South Atlantic Anomaly, can also degrade satellite radiance measurements. Saturation specifically pertains to observations of very bright surfaces such as sun glint over open water or thick clouds. When saturation occurs, additional photoelectric charge generated at the saturated pixel may overflow to pixels adjacent to a saturated area and be reflected as a distorted image in the final sensor output.When these effects cannot be corrected to an acceptable level for science quality retrievals, flagging of the affected pixels is indicated. Here, we introduce a straightforward detection method that is based on the correlation, r, between the observed Earthshine radiance and solar irradiance spectraover a 10 nm-spectral range; our Decorrelation Index (DI for brevity) is simply defined as DI=1-r. DI increases with anomalous additive effects or excessive noise in either radiances, the most likely cause indata from theOzone Monitoring Instrument (OMI),or irradiances. DI is relatively straight-forward to use and interpret and can be 20computed for different wavelength intervals. We developed a set of DIs for two spectral channelsof the OMI, a hyperspectral pushbroom imaging spectrometer. For each OMI spatial measurement, we define 14 wavelength-dependent DIs within the OMI visible channel (350-498 nm) and 6 DIs in its ultraviolet 2 (UV2) channel (310-370 nm). As defined, DIs reflect a continuous range of deviations of observed spectra from the reference irradiance spectrum that are complementary to the binary Saturation Possibility Warning (SPW) flags currently provided for each individual spectral/spatial pixel in the OMI radiance data set. Smaller values of DI are also caused by a number of geophysical factors; this allows one to obtain interesting physical results on the global distribution of spectral variations.

Space sensor↗

Surface morphology and photoelectric properties of FTO ceramic thin films under a simple transparent cover-assisted laser annealing

Highlights: • A simple transparent cover-assisted laser annealing method was employed on FTO films. • The presence of coverslip or PET significantly affected the film surface morphology. • Coverslip- or PET-assisted laser annealing greatly increased grain size of the film. • The PET-assisted laser annealed FTO film exhibited the best photoelectric property. - Abstract: A simple transparent cover-assisted laser annealing strategy, which used a coverglass or a PET sheet as the transparent cover, was proposed to improve photoelectric properties of fluorine-doped tin oxide (FTO) thin films. Pure laser annealing was also performed for comparison. Transparent cover-assisted laser annealing was found to be more effective for producing densely distributed particles, decreasing surface roughness and increasing grain size, thus enhancing transmittance and conductivity of the film. More importantly, compared with coverglass-assisted laser annealing, PET-assisted laser annealing enabled the film surface to be covered with more uniform and denser particles and exhibit a remarkable increase in grain size. Therefore the film had the highest total transmittance of 84.32%, the highest specular transmittance of 75.88%, a slightly decreased haze of 10.01% and the lowest sheet resistance of 7.36 Ω/sq. The simple PET-assisted laser annealing method may be a promising substitution for the conventional laser annealing treatment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photochemical charges separation and photoelectric properties of flexible solar cells with two types of heterostructures

Photochemical charges generation, separation, and transport at nanocrystal interfaces are central to energy conversion for solar cells. Here, Zn{sub 2}SnO{sub 4} nanowires/Cu{sub 4}Bi{sub 4}S{sub 9} (ZTO/CBS), ZTO nanowires/CBS-reduced graphene oxide (ZTO/CBS-RGO), and bulk heterojunction (BHJ) solar cells were measured. The signals of steady state and electric field-induced surface photovoltage indicate that RGO with high electron mobility can evidently improve the photovoltaic response. Besides, ZTO/CBS and ZTO/CBS-RGO cells exhibit the excellent performance and the highest efficiencies of 1.2% and 2.8%, respectively. The internal relations of photoelectric properties to some factors, such as film thickness, direct paths, RGO conductive network, energy level matching, etc., were discussed in detail. Qualitative and quantitative analyses further verified the comprehensive effect of RGO and other factors. Importantly, the fine bendable characteristic of BHJ solar cells with excellent efficiency and facile, scalable production gives the as-made flexible solar cells device potential for practical application in future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of the effective sample thickness via radiative capture

Our procedure for determining the effective thickness of non-uniform irregular-shaped samples via radiative capture is described. In this technique, partial γ-ray production cross sections of a compound nucleus produced in a neutron-capture reaction are measured using Prompt Gamma Activation Analysis and compared to their corresponding standardized absolute values. For the low-energy transitions, the measured cross sections are lower than their standard values due to significant photoelectric absorption of the γ rays within the bulk-sample volume itself. Using standard theoretical techniques, the amount of γ-ray self absorption and neutron self shielding can then be calculated by iteratively varying the sample thickness until the observed cross sections converge with the known standards. The overall attenuation provides a measure of the effective sample thickness illuminated by the neutron beam. This procedure is illustrated through radiative neutron capture using powdered oxide samples comprising enriched 186 W and 182 W from which their tungsten-equivalent effective thicknesses are deduced to be 0.077(3) mm and 0.042(8) mm, respectively.

(n, γ) radiative capture↗

GaAs, AlGaAs and InGaP Tunnel Junctions for Multi-Junction Solar Cells Under Concentration: Resistance Study

The following four TJ designs, AlGaAs/AlGaAs, GaAs/GaAs, AlGaAs/InGaP and AlGaAs/GaAs are studied to determine minimum doping concentration to achieve a resistance of <10{sup -4} {omega}{center_dot}cm{sup 2} and a peak tunneling current suitable for MJ solar cells up to 1500-suns concentration (operating current of 21 A/cm{sup 2}). Experimentally calibrated numerical models are used to determine how the resistance changes as a function of doping concentration. The AlGaAs/GaAs TJ design is determined to require the least doping concentration to achieve the specified resistance and peak tunneling current, followed by the GaAs/GaAs, and AlGaAs/AlGaAs TJ designs. The AlGaAs/InGaP TJ design can only achieve resistances >5x10{sup -4} {omega}cm{sup 2}.

36 MATERIALS SCIENCE↗

Electronic Processes in CdIn{sub 2}Te{sub 4} Crystals

The results of investigations of electrical, optical, and photoelectric properties of CdIn{sub 2}Te{sup 4} crystals, which were grown by the Bridgman method are presented. It is shown that electrical conductivity is determined mainly by electrons with the effective mass m{sub n} = 0.44m{sub 0} and the mobility 120–140 cm{sup 2}/(V s), which weakly depends on temperature. CdIn{sub 2}Te{sub 4} behaves as a partially compensated semiconductor with the donor-center ionization energy E{sub d} = 0.38 eV and the compensation level K = N{sub a}/N{sub d} = 0.36. The absorption-coefficient spectra at the energy hν < E{sub g} = 1.27 eV are subject to the Urbach rule with a typical energy of 18–25 meV. The photoconductivity depends on the sample thickness. The diffusion length, the charge-carrier lifetime, and the surface-recombination rate are determined from the photoconductivity spectra.

36 MATERIALS SCIENCE↗

Spectral energy distributions of nuclei of peculiar galaxies.

Consideration of galaxies of the types described by Seyfert, Zwicky, Markarian and others. Quasars are discussed in terms of their similarities to the nuclei of peculiar galaxies. The data discussed were obtained almost exclusively with photoelectric spectrometers. Peculiar galaxies have a wide range of properties insofar as their spectra are concerned. Many have very strong emission lines. Sources of continuous radiation, and distance scale problems and selection effects are discussed. Data are presented which are representative of spectrophotometric observational results for 12 Markarian galaxies, 14 Zwicky compact objects, and 16 radio galaxies. The general properties of spectral energy distributions of peculiar galaxies and quasars are discussed.

Oke, J. B.↗

Seamless lateral graphene p–n junctions formed by selective in situ doping for high-performance photodetectors

Lateral graphene p–n junctions are important since they constitute the core components in a variety of electronic/photonic systems. However, formation of lateral graphene p–n junctions with a controllable doping levels is still a great challenge due to the monolayer feature of graphene. Herein, by performing selective ion implantation and in situ growth by dynamic chemical vapor deposition, direct formation of seamless lateral graphene p–n junctions with spatial control and tunable doping is demonstrated. Uniform lattice substitution with heteroatoms is achieved in both the boron-doped and nitrogen-doped regions and photoelectrical assessment reveals that the seamless lateral p–n junctions exhibit a distinct photocurrent response under ambient conditions. As ion implantation is a standard technique in microelectronics, our study suggests a simple and effective strategy for mass production of graphene p–n junctions with batch capability and spatial controllability, which can be readily integrated into the production of graphene-based electronics and photonics.

36 MATERIALS SCIENCE↗

Photovoltage and photocurrent in Pd–oxide–InP structures in a hydrogen medium

Pd–oxide–InP (MOS) structures are fabricated, and their physical and photoelectric properties in a hydrogen atmosphere are investigated. It is established that a decrease in photovoltage of the structure and a large increase in photocurrent in the circuit are observed under the pulsed effect of hydrogen on the structure with a palladium layer illuminated by a light-emitting diode (LED of the wavelength λ = 0.9 μm). The kinetics and mechanism of the variation in the photovoltage and photocurrent are considered. It is assumed that the photovoltage decreases because of the ionization of hydrogen atoms in the Pd layer, and the photocurrent increases due to the thermionic emission of nonequilibrium electrons from the Pd layer into the semiconductor. On the basis of results of the investigations, the sensitive element for an optoelectronic hydrogen sensor is developed.

36 MATERIALS SCIENCE↗

URSIES - An ultravariable resolution single interferometer echelle scanner.

Use of a Fabry-Perot interferometer in a Ramsay mount in tandem with an echelle Hilger monochromator with pinholes instead of slits. The instrument, URSIES, is enclosed within a pressure chamber filled with Freon. Photoelectric pulse counting techniques and pressure scanning are used to record the spectrum. This design has four basic advantages: (1) the resolution of the scanner is variable from 5.0 to 0.005 A, and the effective wavelength range is quite broad, from 3500 to 13,000 A; (2) a light gain of ten over conventional grating scanners at resolutions of 0.1 A or better is achieved; (3) very low levels of light from outside the wavelength passband reach the detector; for a resolution of 0.03 A at 6000 A this level is 5%; and (4) there are very low levels of scattered light from the pinholes when extended sources are observed. The scattered light from the instrument at the edge of the solar disk is found to be less than 1% from 4000 to 11,000 A. Measurements demonstrating these advantages are discussed.

Wyller, A. A.↗

The rotation of small asteroids

The Binzel and Mulholland (1983) sample of photoelectrically determined rotational parameters for 17 main belt asteroids with diameters less than 30 km are compared with previous observations of asteroids of that size range. Rigorous statistical tests are applied to investigate bias effects and quantify results on asteroid rotation. The samples are described and compared for rotational frequency, rotational amplitude, frequency distribution, and diameter and frequency dependence. It is concluded that the observed rotational frequency distribution can be acceptably fit by two Maxwellian distributions, which is consistent with the hypothesis that there are separate populations of slow and fast rotating asteroids. The frequency distributions of main belt asteroids less than 15 km in diameter and earth and Mars crossers do not differ significantly, but the larger mean lightcurve amplitude of these crossers is statistically significant. No significant diameter dependence on rotational frequency is found among the sample asteroids.

Binzel, R. P.↗

Technical Note: Exploring the limit for the conversion of energy-subtracted CT number to electron density for high-atomic-number materials

Purpose: For accurate tissue inhomogeneity correction in radiotherapy treatment planning, the authors had previously proposed a novel conversion of the energy-subtracted CT number to an electron density (ΔHU–ρ{sub e} conversion), which provides a single linear relationship between ΔHU and ρ{sub e} over a wide ρ{sub e} range. The purpose of this study is to address the limitations of the conversion method with respect to atomic number (Z) by elucidating the role of partial photon interactions in the ΔHU–ρ{sub e} conversion process. Methods: The authors performed numerical analyses of the ΔHU–ρ{sub e} conversion for 105 human body tissues, as listed in ICRU Report 46, and elementary substances with Z = 1–40. Total and partial attenuation coefficients for these materials were calculated using the XCOM photon cross section database. The effective x-ray energies used to calculate the attenuation were chosen to imitate a dual-source CT scanner operated at 80–140 kV/Sn under well-calibrated and poorly calibrated conditions. Results: The accuracy of the resultant calibrated electron density,ρ{sub e}{sup cal}, for the ICRU-46 body tissues fully satisfied the IPEM-81 tolerance levels in radiotherapy treatment planning. If a criterion of ρ{sub e}{sup cal}/ρ{sub e} − 1 is assumed to be within ±2%, the predicted upper limit of Z applicable for the ΔHU–ρ{sub e} conversion under the well-calibrated condition is Z = 27. In the case of the poorly calibrated condition, the upper limit of Z is approximately 16. The deviation from the ΔHU–ρ{sub e} linearity for higher Z substances is mainly caused by the anomalous variation in the photoelectric-absorption component. Conclusions: Compensation among the three partial components of the photon interactions provides for sufficient linearity of the ΔHU–ρ{sub e} conversion to be applicable for most human tissues even for poorly conditioned scans in which there exists a large variation of effective x-ray energies owing to beam-hardening effects arising from the mismatch between the sizes of the object and the calibration phantom.

62 RADIOLOGY AND NUCLEAR MEDICINE↗