Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle Size Distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Decending motion of particle and its effect on ozone hole chemistry

Particle descending motion is one possible process which causes ozone loss near the tropopause in the Antarctic spring. However, this particle size distribution has not yet been measured. Particle settling is an important redistribution process of the chemical constituents contained in the particles. To understand particle settling effects on the Ozone Hole, information on the size distribution and the chemical composition of the particles is necessary.

Iwasaka, Y.↗
NASA NTRS2018

Comparisons of Bin and Bulk Microphysics Schemes in Simulations of Topographic Winter Precipitation with Radar and Radiometer Measurements

The Hebrew University Cloud Model (HUCM) bin scheme and the Thompson bulk scheme in the Weather Research and Forecasting (WRF) model are compared to assess biases often found in simulated brightness temperature and radar reflectivity. Compared to our preceding study that evaluated several bulk schemes in the WRF model, the current study obtains a reduction of the bias from excessive microwave scattering by precipitation ice for both HUCM bin and the Thompson bulk microphysics schemes for a topographic winter precipitation event associated with an atmospheric river. The Thompson particle size distributions (PSDs) and snow particle density assumption are implemented into the Goddard Satellite Data Simulator Unit (G‐SDSU) and have produced improvements. Despite the greater sophistication of the bin scheme in representing cloud and precipitation processes, the simulation with the Thompson bulk scheme is generally in better agreement with observations for this winter event. The explicitly resolved hydrometeor PSDs in HUCM enable analysis of mass spectra variations in response to changes in microphysics assumptions. Two HUCM sensitivity runs tested the enhancement of snow particle breakup and the influence of ice nuclei (IN) concentration. Higher IN concentration resulted in increased snow mass and broadened the spectrum toward small‐size particles. Modified snow mass spectra and resultant changes in graupel contributed to modifications in scattering and reflectivity simulations. The article demonstrates the bin scheme's capability to provide a new means to improve our understanding of uncertainties in mesoscale weather models and radiative transfer models.

microwave remote sensing↗
NASA NTRS1999

The MECA Payload as a Dust Analysis Laboratory on the MSP 2001 Lander

In a companion abstract, the "Mars Environmental Compatibility Assessment" (MECA) payload for Mars Surveyor Program 2001 (MSP 2001) is described in terms of its capabilities for addressing exobiology on Mars. Here we describe how the same payload elements perform in terms of gathering data about surface dust on the planet. An understanding of the origin and properties of dust is important to both human exploration and planetary geology. The MECA instrument is specifically designed for soil/dust investigations: it is a multifunctional laboratory equipped to assess particulate properties with wet chemistry, camera imagery, optical microscopy (potentially with LTV fluorescence capability), atomic force microscopy (AFM; potentially with mineral-discrimination capabilities), electrometry, active & passive external materials-test panels, mineral hardness testing, and electrostatic & magnetic materials testing. Additionally, evaluation of soil chemical and physical properties as a function of depth down to about 50 cm will be facilitated by the Lander/MECA robot arm on which the camera (RAC) and electrometer are mounted. Types of data being sought for the dust include: (1) general textural and grain-size characterization of the soil as a whole --for example, is the soil essentially dust with other components or is it a clast-supported material in which dust resides only in the clast interstices, (2) size frequency distribution for dust particles in the range 0.01 to 10.00 microns, (3) particle-shape distribution of the soil components and of the fine dust fraction in particular, (4) soil fabric such as grain clustering into clods, aggregates, and cemented/indurated grain amalgamations, as well as related porosity, cohesiveness, and other mechanical soil properties, (5) cohesive relationship that dust has to certain types of rocks and minerals as a clue to which soil materials may be prime hosts for dust "piggybacking", (6) particle, aggregate, and bulk soil electrostatic properties, (7) particle hardness, (8) particle magnetic properties, (9) bulk dust geochemistry (solubility, reactivity, ionic and mineral species). All of these quantities are needed in order for the human exploration program to make assessments of hazards on Mars, and to better enable the production on earth, of soil/dust simulants that can act as realistic test materials in terms of those properties that render dust a contaminant.Such properties include the small grain size that enables penetration of space-suit joints, mechanical interfaces and bearings, seals, etc., and presents difficulty for filtration systems. Size also plays a critical role in the potential for lung disease in long-term habitats. The properties of grain shape and hardness are important parameters in determining the abrasiveness of dust as it enters mechanical systems, or bombards helmet visors and habitat windows in dust-laden winds. Adhesive electrostatic and magnetic properties of dust will be prime causes of contamination of space suits and equipment. Contamination causes mechanical malfunction, tracking of dirt into habitats, "piggybacking" of toxins on dust into habitats, changes in albedo and efficiency of solar arrays and heat exchangers, and changes in electrical conductivity of suit surfaces and other materials that may have specific safety requirements regarding electrical conductivity. Other potentially hazardous properties of dust include the possibility of high solubility of some component grains (rendering them reactive), and toxicity of some materials --grains of superoxidants and heavy metals (there is always the slim, but not inconceivable possibility of biogenic components such as spores). Because Mars has no active surface aqueous regime, volcanic emissions, meteoritic debris, weathering products, and photochemical products of Mars have nowhere to go except reside in the surface; there are few mechanical or chemical (buffering) processes to remove the accumulation of eons. From a planetology perspective, there are many enigmatic issues relating to dust and the aeolian regime in general. MECA will be able to address many questions in this area. For example, if MECA determines a particular particle size distribution (size and sorting values), it will be possible to make inferences about the origin of the dust - - is it all aeolian, or a more primitive residue of weathering, volcanic emissions, and meteoritic gardening? Trenching with the Lander/MECA robot arm will enable local stratigraphy to be determined in terms of depositional rates, amounts and cyclicity in dust storms and/or local aeolian transport. Grain shape will betray the origin of the dust fragments as being the product of recent or ancient weathering, or the comminution products of aeolian transport --the dust-silt ratio might be a measure of aeolian comminution energy. Additional information is contained in the original.

Marshall, J.↗
NASA NTRS2020

Models Transport Saharan Dust too Low in the Atmosphere: a Comparison of the MetUM and CAMS Forecasts with Observations

We investigate the dust forecasts from two operational global atmospheric models in comparison with in situ and remote sensing measurements obtained during the AERosol properties – Dust (AER-D) field campaign. Airborne elastic backscatter lidar measurements were performed on board the Facility for Airborne Atmospheric Measurements during August 2015 over the eastern Atlantic, and they permitted us to characterise the dust vertical distribution in detail, offering insights on transport from the Sahara. They were complemented with airborne in situ measurements of dust size distribution and optical properties, as well as datasets from the Cloud–Aerosol Transport System (CATS) spaceborne lidar and the Moderate Resolution Imaging Spectroradiometer (MODIS). We compare the airborne and spaceborne datasets to operational predictions obtained from the Met Office Unified Model (MetUM) and the Copernicus Atmosphere Monitoring Service (CAMS). The dust aerosol optical depth predictions from the models are generally in agreement with the observations but display a low bias. However, the predicted vertical distribution places the dust lower in the atmosphere than highlighted in our observations. This is particularly noticeable for the MetUM, which does not transport coarse dust high enough in the atmosphere or far enough away from the source.We also found that both model forecasts underpredict coarse-mode dust and at times overpredict fine-mode dust, but as they are fine-tuned to represent the observed optical depth, the fine mode is set to compensate for the underestimation of the coarse mode. As aerosol–cloud interactions are dependent on particle numbers rather than on the optical properties, this behaviour is likely to affect their correct representation. This leads us to propose an augmentation of the set of aerosol observations available on a global scale for constraining models, with a better focus on the vertical distribution and on the particle size distribution. Mineral dust is a major component of the climate system; therefore, it is important to work towards improving how models reproduce its properties and transport mechanisms.

Debbie OSullivan↗
DOE OSTI2025

Predicting the evolution of biomass bulk density through feedstock preprocessing: Discrete element modeling, regression analysis, and pilot-scale validation

Bulk density is an important material property of biomass feedstocks, influencing handling, storage, transport costs, and conversion efficiency. In this study, predictive regression models for loose and tapped bulk densities of Alamo and Cave-in-Rock switchgrass are developed using a comprehensive dataset generated via calibrated bonded-sphere discrete element method (DEM) simulations. Here, a key contribution of this study is the use of a DEM-based approach, which correlates density with moisture content and particle size distribution parameters and enables analysis across a continuous particle size range, overcoming limitations of purely experimental data. For comparison, regression models are also developed using only experimental data from pilot-scale runs at the Biomass Feedstock National User Facility at Idaho National Laboratory. Validation against pilot-scale data showed reasonable prediction accuracy for both model types, particularly for smaller particle sizes (post-secondary grinding). While the experimental model showed slightly better performance matching the validation data in some cases, the DEM-based model benefits from a much larger dataset, reduced predictor multicollinearity, and continuous parameter coverage, highlighting the utility of validated simulation models for developing robust predictive tools for biomass preprocessing applications.

09 - BIOMASS FUELS↗
NASA NTRS1972

Measurements of the growth of the ice budget in a persisting contrail.

An experiment was conducted with the NCAR Sabreliner to measure the ice water content (IWC) and the total ice budget within its contrail. Particle size distributions were measured with an optical-array particle size spectrometer. The experiment was performed in a region of the atmosphere void of natural ice crystals (cirrus) but estimated to be above ice saturation and favorable to ice crystal growth. The IWC measured was found to be in excess of 0.1 g/cu m near the contrail axis with average values of a few hundredths of a gram throughout the contrail. The measured water mass within the contrail was found to be four orders of magnitude greater than that computed as a combustion product. Average crystal sizes of nearly 0.5 mm allow for a transfer of moisture at generation level to much lower levels before reevaporation. Because of the magnitude of the measured effect and its believed frequent occurrence, the overall effect of subtropopause jet traffic is likely to lower the water abundance at the most traveled levels.

Knollenberg, R. G.↗
NASA NTRS1983

A theoretical and experimental study of turbulent particle-laden jets

Mean and fluctuating velocities of both phases, particle mass fluxes, particle size distributions in turbulent particle-laden jets were measured. The following models are considered: (1) a locally homogeneous flow (LHF) model, where slip between the phases was neglected; (2) a deterministic separated flow (DSF) model, where slip was considered but effects of particle dispersion by turbulence were ignored; and (3) a stochastic separated flow (SSF) model. The SSF model performed reasonably well with no modifications in the prescriptions for eddy properties from its original calibration. A modified k- model, incorporating direct contributions of interphase transport on turbulence properties (turbulence modulation), was developed within the framework of the SSF model.

Shuen, J. S.↗
NASA NTRS2023

Short-Transverse Tensile Fracture Behavior of Thick AA2219 Plate - Effects of Theta (Al2Cu) Particle Size and Distribution

An investigation was conducted to obtain a better understanding on the microstructural characteristics of 5-inch-thick AA2219-T87 plate material and the mechanism that led to the unexpected low ductility in the short-transverse (ST) orientation. Materials characterization techniques were utilized to observe the microstructure of fractured tensile specimens and remnant plate material. The mechanism and cause of low ST ductility in the thick plate material is presented and discussed in this report.

Short-Transverse Orientation↗
NASA NTRS1975

Elemental composition and size distribution of particulates in Cleveland, Ohio

Measurements were made of the elemental particle size distribution at five contrasting urban environments with different source-type distributions in Cleveland, Ohio. Air quality conditions ranged from normal to air pollution alert levels. A parallel network of high-volume cascade impactors (5-state) were used for simultaneous sampling on glass fiber surfaces for mass determinations and on Whatman-41 surfaces for elemental analysis by neutron activation for 25 elements. The elemental data are assessed in terms of distribution functions and interrelationships and are compared between locations as a function of resultant wind direction in an attempt to relate the findings to sources.

King, R. B.↗
NASA NTRSDate not supplied

On the Emitted Dust Size Distribution and Its Variability: Insights From A Field Campaign in an Ephemeral Lake of the Lower Drâa Valley, Moroccan Sahara

During the last decades the emitted particle size distribution (PSD) of dust and its variability have been actively discussed due to their effects on the Earth System. Some frameworks support a higher proportion of aggregate’s fragmentation as wind speed increases, while others suggest the PSD independence of wind speed and soil properties, at least up to ~10 µm. Constraining the size-resolved dust emission and its variability is key to reduce the uncertainty of Earth system models, but still requires further analysis. The ERC project FRAGMENT addresses these and other issues related to dust emission, dust mineralogical composition and its effects upon climate. In this context we conducted a one month field campaign in September 2019 at L’Bour, an ephemeral lake located in the Lower Drâa Valley, resulting in a detailed description of the soil, dust emission and meteorology. During the campaign saltation and dust emission were very frequent under two prevailing wind directions. Friction velocity varied around 0.15 ms⁻¹, with peaks close to 0.4 ms⁻¹, except for a peak of 0.6 ms⁻¹ coinciding with the arrival of one of the moist convective storms or haboobs that occurred during this period. We study the near-surface concentration and diffusive flux PSDs along with their variability up to ~19 µm in optical diameter (~21 µm in geometric dust diameter). As expected, we find significant differences between the concentration and diffusive flux PSDs, with the latter showing a higher proportion of coarse and super-coarse particles. Our results also highlight dependencies of the PSDs with friction velocity, wind direction, and type of event (regular events vs haboob outflow events). We first discuss the potential origin of the variations and dependencies, which include 1) differences in fetch and surface between directions, 2) dry deposition of coarse and super-coarse dust depending on friction velocity, 3) more disaggregation with increasing friction velocity, and 4) the effect of the haboob gust front. Our calculations show the influence of dry deposition upon the diffusive flux PSDs. We finally compare our PSDs with brittle fragmentation theory, both with the original 2011 formulation using optical diameters, and with the more recent 2022 formulation including the emission of super-coarse dust and using geometric diameters.

particle size distribution↗
NASA NTRS2021

Analysis of simultaneous aerosol and ocean glint retrieval using multi-angle observations

Since early 2000, NASA's Multi-angle Imaging SpectroRadiometer (MISR) instrument has been performing remote sensing retrievals of aerosol optical properties from the polar-orbiting Terra spacecraft. A noteworthy aspect of MISR observations over the ocean is that, for much of the Earth, some of the multi-angle views have contributions from solar reflection by the ocean surface (glint, or glitter), while others do not. Aerosol retrieval algorithms often discard these glint-influenced observations because they can overwhelm the signal and are difficult to predict without knowledge of the (wind-speed-driven) ocean surface roughness. However, theoretical studies have shown that multi-angle observations of a location at geometries with and without reflected sun glint can be a rich source of information, sufficient to support simultaneous retrieval of both the aerosol state and the wind speed at the ocean surface. We are in the early stages of creating such an algorithm. In this paper, we describe our assessment of the appropriate level of parameterization for simultaneous aerosol and ocean surface property retrievals using sun glint. For this purpose, we use generalized nonlinear retrieval analysis (GENRA), an information content assessment (ICA) technique employing Bayesian inference, and simulations from the Ahmad–Fraser iterative radiative transfer code. We find that four parameters are suitable: aerosol optical depth (τ), particle size distribution (expressed as the fine mode fraction f of small particles in a bimodal size distribution), surface wind speed (w), and relative humidity (r, to define the aerosol water content and complex refractive index). None of these parameters define ocean optical properties, as we found that the aerosol state could be retrieved with the nine MISR near-infrared views alone, where the ocean body is strongly absorbing in the open ocean. We also found that retrieval capability varies with observation geometry and that as τ increases so does the ability to determine aerosol intensive optical properties (r and f, while it decreases for w). Increases in w decrease the ability to determine the true value of that parameter but have minimal impact on retrieval of aerosol properties. We explored the benefit of excluding the two most extreme MISR view angles for which radiative transfer with the plane-parallel approximation is less certain, but we found no advantage in doing so. Finally, the impact of treating wind speed as a scalar parameter, rather than as a two-parameter directional wind, was tested. While the simpler scalar model does contribute to overall aerosol uncertainty, it is not sufficiently large to justify the addition of another dimension to parameter space. An algorithm designed upon these principles is in development. It will be used to perform an atmospheric correction with MISR for coincident ocean color (OC) observations by the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument, also on the NASA Terra spacecraft. Unlike MISR, MODIS is a single-view-angle instrument, but it has a more complete set of spectral channels ideal for determination of optical ocean properties. The atmospheric correction of MODIS OC data can therefore benefit from MISR aerosol retrievals. Furthermore, higher-spatial-resolution data from coincident MISR observations may also improve glint screening.

Kirk Knobelspiesse↗
DOE OSTI2025

CROCUS Air Quality Dataset from the University of Illinois Chicago (UIC), July 2024

This dataset was collected by the measurement system in the Atmosphere, Climate, and Ecosystems (ACE) Lab at the University of Illinois Chicago (UIC) from July 12 to July 31, 2024, as part of the Community Research on Climate and Urban Science (CROCUS) Urban Integrated Field Laboratory (UIFL) project, led by Argonne National Laboratory.To enhance understanding of urban air quality dynamics in Chicago, and as part of the CROCUS 2024 Urban Canyon Intensive Observation Period (IOP), several instruments were set up to provide continuous measurements of air quality parameters in Chicago during July 2024. These measurements cover both aerosols and gas-phase species. It focuses on particle size distribution (2.5–478 nm) measured by two Scanning Mobility Particle Sizers (SMPS) at a 4-min resolution, total particle number concentrations at a 1-s resolution, and chemical composition from a High-Resolution Time-of-Flight Aerosol Mass Spectrometer (AMS) at a 1-min resolution. Key gas-phase species, including NO, NO₂, SO₂, and O₃, are measured at a 1-min resolution, along with high-resolution NO and dimethyl sulfide (DMS) data from a Chemical Ionization Mass Spectrometer (CIMS). Volatile organic compound (VOC) data for toluene, isoprene, and benzene are provided by a GC-PID with a time resolution of 25 minutes.The data are formatted as NetCDF (.nc) files, making them easily accessible using common software such as MATLAB, R, and Python. Each parameter is stored in an individual dataset, which includes detailed instrument information in the header, as well as the corresponding sample start time and concentration/distribution data for each sample.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2002

Parameterization of Shortwave Cloud Optical Properties for a Mixture of Ice Particle Habits for use in Atmospheric Models

Based on the single-scattering optical properties pre-computed with an improved geometric optics method, the bulk absorption coefficient, single-scattering albedo, and asymmetry factor of ice particles have been parameterized as a function of the effective particle size of a mixture of ice habits, the ice water amount, and spectral band. The parameterization has been applied to computing fluxes for sample clouds with various particle size distributions and assumed mixtures of particle habits. It is found that flux calculations are not overly sensitive to the assumed particle habits if the definition of the effective particle size is consistent with the particle habits that the parameterization is based. Otherwise, the error in the flux calculations could reach a magnitude unacceptable for climate studies. Different from many previous studies, the parameterization requires only an effective particle size representing all ice habits in a cloud layer, but not the effective size of individual ice habits.

Chou, Ming-Dah↗
NASA NTRS1972

An experimental investigation of radiative properties of aluminum oxide particles.

The radiative properties of aluminum oxide at high temperatures were determined at various wavelengths. Absorption cross-sections of aluminum oxide particles averaged over a particle size distribution were determined by measuring the radiative emission from the particles in a flame and by determining the particle number density and size distribution from measurements of the scattering of laser light incident on the particles in this flame. From these values of average absorption cross-section, the imaginary part of the refractive index was deduced. Results indicate that the absorption cross-section and the imaginary part of the refractive index increase as the temperature increases in the range from 1920 to 2610 K, and that these properties decrease with increasing wavelength in the interval from 0.35 to 1.2 micron, indicating a nongray-body behavior.

Mularz, E. J.↗
DOE OSTI2023

Nanoparticle Catalyst Formation and Subsequent Sintering: Size-Distribution Fundamental Understanding and Catalyst Control via Mechanism-Enabled Population Balance Modeling (Final Report)

The challenge of elucidating the chemical mechanisms by which nano- and other particles form, and then using those mechanisms to understand, analyze, and ideally predict particle-size and particle-size distributions, was undertaken. Thanks to multi-year, longer-term DOE support each of these challenges was successfully met. The community is now able to both predict, and control in cases where the underlying mechanism of particle formation has been determined, the key PS and PSD that are, in turn, critical properties that strongly influence the catalytic and other physical properties of nano- and larger particles across nature.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Elemental composition and size distribution of particulates in Cleveland, Ohio

Measurements have been made of the elemental particle size distribution at five contrasting urban environments with different source-type distributions in Cleveland, Ohio. Air quality conditions ranged from normal to air pollution alert levels. A parallel network of high-volume cascade impactors (5-stage) were used for simultaneous sampling on glass fiber surfaces for mass determinations and on Whatman-41 surfaces for elemental analysis by neutron activation for 25 elements. The elemental data are assessed in terms of distribution functions and interrelationships and are compared between locations as a function of resultant wind direction in an attempt to relate the findings to sources.

Leibecki, H. F.↗