Search NASA⌕ Search

SEARCH · Search NASA

Results for “Photometric Testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

The eROSITA Final Equatorial-Depth Survey (eFEDS)

Theoretical models of the co-evolution of galaxies and active galactic nuclei (AGNs) ascribe an important role in the feedback process to a short, luminous, obscured, and dust-enshrouded phase during which the accretion rate of the supermassive black hole is expected to be at its maximum and the associated AGN-driven winds are also predicted to be maximally developed. Here, to test this scenario, we have isolated a textbook candidate from the eROSITA Final Equatorial-Depth Survey (eFEDS) obtained within the performance and verification program of the eROSITA telescope on board the Spectrum Röntgen Gamma mission. From an initial catalogue of 246 hard X-ray selected sources that are matched with the photometric and spectroscopic information available within the eROSITA and Hyper Suprime-Cam consortia, three candidates quasars in the feedback phase have been isolated applying a diagnostic proposed previously. Only one source (eFEDS J091157.4+014327) has a spectrum already available (from SDSS-DR16, z = 0.603) and it unambiguously shows abroad component (full width at half maximum ~1650 kms –1 ) in the [OIII]5007 line. The associated observed L [OIII] is ~2.6 × 10 42 erg s –1 , one to two orders of magnitude higher than that observed in local Seyfert galaxies and comparable to those observed in a sample of z ~ 0.5 type 1 quasars. From the multi-wavelength data available, we derive an Eddington ratio (L bol /L Edd ) of ~0.25 and a bolometric correction in the hard X-ray band of k bol ~ 10, which is lower than the corrections observed for objects at similar bolometric luminosity. These properties, along with the outflow, the high X-ray luminosity, the moderate X-ray obscuration (L X ~10 44.8 erg s –1 , N H ~2.7 × 10 22 cm –2 ), and the red optical colour, all match the prediction of quasars in the feedback phase from merger-driven models. Forecasting to the full eROSITA all-sky survey with its spectroscopic follow-up, we predict that by the end of 2024, we will have a sample of few hundred such objects at z= 0.5–2.

79 ASTRONOMY AND ASTROPHYSICS↗

Cosmic shear in harmonic space from the Dark Energy Survey Year 1 Data: compatibility with configuration space results

ABSTRACT We perform a cosmic shear analysis in harmonic space using the first year of data collected by the Dark Energy Survey (DES-Y1). We measure the cosmic weak lensing shear power spectra using the metacalibration catalogue and perform a likelihood analysis within the framework of CosmoSIS. We set scale cuts based on baryonic effects contamination and model redshift and shear calibration uncertainties as well as intrinsic alignments. We adopt as fiducial covariance matrix an analytical computation accounting for the mask geometry in the Gaussian term, including non-Gaussian contributions. A suite of 1200 lognormal simulations is used to validate the harmonic space pipeline and the covariance matrix. We perform a series of stress tests to gauge the robustness of the harmonic space analysis. Finally, we use the DES-Y1 pipeline in configuration space to perform a similar likelihood analysis and compare both results, demonstrating their compatibility in estimating the cosmological parameters S8, σ8, and Ωm. We use the DES-Y1 metacalibration shape catalogue, with photometric redshifts estimates in the range of 0.2−1.3, divided in four tomographic bins finding σ8(Ωm/0.3)0.5 = 0.766 ± 0.033 at 68 per cent CL. The methods implemented and validated in this paper will allow us to perform a consistent harmonic space analysis in the upcoming DES data.

79 ASTRONOMY AND ASTROPHYSICS↗

Electro-active polymers containing pendent 2,7-diarylfluorene fragments as materials for OLEDs

Poly[2-phenyl-7-(4-vinylphenyl)-9,9-diethylfluorene)], poly[2-(1-naphtyl)-7-(4-vinylphenyl)-9,9-diethylfluorene)] and poly[2-(4-biphenyl)-7-(4-vinylphenyl)-9,9-diethylfluorene)] were synthesized and characterized by NMR spectroscopy, elemental analysis and gel permeation chromatography. The derivatives represent materials of high thermal stability with initial thermal destruction temperatures from 390°C to 400 °C. The glass transition temperatures of the amorphous materials were 182 °C, 151 °C and 159 °C respectively. Hole-transporting properties of the polymeric materials were tested in the structures of organic light emitting diodes with Alq{sub 3} as the green emitter and electron transporting material. The device containing hole-transporting layers of polymer with 2-(4-biphenyl)-7-(4-vinylphenyl)-9,9-diethylfluorene moieties exhibited the best overall performance with turn on voltage of 3.6 V, a maximum photometric efficiency of 3.1 cd/A and maximum brightness of about 5300 cd/m{sup 2}.

36 MATERIALS SCIENCE↗

The Correlation between Halo Mass and Stellar Mass for the Most Massive Galaxies in the Universe

We present measurements of the clustering of galaxies as a function of their stellar mass in the Baryon Oscillation Spectroscopic Survey. We compare the clustering of samples using 12 different methods for estimating stellar mass, isolating the method that has the smallest scatter at fixed halo mass. In this test, the stellar mass estimate with the smallest errors yields the highest amplitude of clustering at fixed number density. We find that the PCA stellar masses of Chen et al. clearly have the tightest correlation with halo mass. The PCA masses use the full galaxy spectrum, differentiating them from other estimates that only use optical photometric information. Using the PCA masses, we measure the large-scale bias as a function of M{sub ∗} for galaxies with logM{sub ∗}⩾11.4, correcting for incompleteness at the low-mass end of our measurements. Using the abundance matching ansatz to connect dark matter halo mass to stellar mass, we construct theoretical models of b(M{sub ∗}) that match the same stellar mass function but have different amounts of scatter in stellar mass at fixed halo mass, σ{sub logM∗}. Using this approach, we find σ{sub logM∗}=0.18{sub −0.02}{sup +0.01}. This value includes both intrinsic scatter as well as random errors in the stellar masses. To partially remove the latter, we use repeated spectra to estimate statistical errors on the stellar masses, yielding an upper limit to the intrinsic scatter of 0.16 dex.

79 ASTRONOMY AND ASTROPHYSICS↗

Photometric calibration in u -band using blue halo stars

ABSTRACT We develop a method to calibrate u-band photometry based on the observed colour of blue Galactic halo stars. The Galactic halo stars belong to an old stellar population of the Milky Way and have relatively low metallicity. The ‘blue tip’ of the halo population – the main sequence turn-off (MSTO) stars – is known to have a relatively uniform intrinsic edge u-g colour with only slow spatial variation. In SDSS data, the observed variation is correlated with Galactic Latitude, which we attribute to contamination by higher metallicity disc stars and fit with an empirical curve. This curve can then be used to calibrate u-band imaging if g-band imaging of matching depth is available. Our approach can be applied to single-field observations at |b| > 30°, and removes the need for standard star observations or overlap with calibrated u-band imaging. We include in our method the calibration of g-band data with ATLAS-Refcat2. We test our approach on stars in KiDS DR 4, ATLAS DR 4, and DECam imaging from the NOIRLab Source Catalog (NSC DR2), and compare our calibration with SDSS. For this process, we use synthetic magnitudes to derive the colour equations between these data sets, in order to improve zero-point accuracy. We find an improvement for all data sets, reaching a zero-point precision of 0.016 mag for KiDS (compared to the original 0.033 mag), 0.020 mag for ATLAS (originally 0.027 mag), and 0.016 mag for DECam (originally 0.041 mag). Thus, this method alone reaches the goal of 0.02 mag photometric precision in u-band for the Rubin Observatory’s Legacy Survey of Space and Time (LSST).

79 ASTRONOMY AND ASTROPHYSICS↗

A joint analysis of 3D clustering and galaxy × CMB-lensing cross-correlations with DESI DR1 galaxies

The spectroscopic data from DESI Data Release 1 (DR1) galaxies enables the analysis of 3D clustering by fitting galaxy power spectra and reconstructed correlation functions in redshift space. Given low measurements of the amplitude of structure from cosmic shear at z ∼ 1, redshift space distortions (RSD) + Baryon Acoustic Oscillation (BAO) signals from DESI galaxies combined with weak lensing can break degeneracies and provide a tight alternative constraint on the z ∼ 1 amplitude of structure. In this paper we perform joint analyses that combine full-shape + post-reconstruction information from the DESI DR1 BGS and LRG samples along with angular cross-correlations with Planck PR4 and ACT DR6 CMB lensing maps. We show that adding galaxy-lensing cross-correlations tightens clustering amplitude constraints, improving σ 8 uncertainties by 30% over RSD+BAO alone. We also include angular galaxy-galaxy and galaxy-lensing spectra using photometric samples from the DESI Legacy Survey to further improve constraints. Our headline results are σ 8 = 0.803 ± 0.017, Ω m = 0.3037 ± 0.0069, and S 8 = 0.808 ± 0.017. Given DESI's preference for higher σ 8 compared to lower values from BOSS, we perform a catalog-level comparison of LRG samples from both surveys. We test sensitivity to dark energy assumptions by relaxing our ΛCDM prior and allowing for evolving dark energy via the w 0 - w a parameterization. We find our S 8 constraints to be relatively unchanged despite a 3.5σ tension with the cosmological constant model when combining with the Union3 supernova likelihood. Finally we test general relativity (GR) by allowing the gravitational slip parameter (γ) to vary, and find γ = 1.17 ± 0.11 in mild (∼ 1.5σ) tension with the GR value of 1.0.

cosmological parameters from LSS↗

Identification of Galaxy Shreds in Large Photometric Catalogs Using Convolutional Neural Networks

Contamination from galaxy fragments, identified as sources, is a major issue in large photometric galaxy catalogs. In this paper, we prove that this problem can be easily addressed with computer vision techniques. We use image cutouts to train a convolutional neural network (CNN) to identify cataloged sources that are in reality just star-formation regions and/or shreds of larger galaxies. The CNN reaches an accuracy ~98% on our testing data sets. We apply this CNN to galaxy catalogs from three among the largest surveys available today: the Sloan Digital Sky Survey, the DESI Legacy Imaging Surveys, and the Panoramic Survey Telescope and Rapid Response System Survey. We find that, even when strict selection criteria are used, all catalogs still show a ~5% level of contamination from galaxy shreds. Our CNN gives a simple yet effective solution to clean galaxy catalogs from these contaminants.

79 ASTRONOMY AND ASTROPHYSICS↗

Clustering with general photo- z uncertainties: application to Baryon Acoustic Oscillations

ABSTRACT Photometric data can be analysed using the 3D correlation function ξp to extract cosmological information via e.g. measurement of the Baryon Acoustic Oscillations (BAO). Previous studies modeled ξp assuming a Gaussian photo-z approximation. In this work we improve the modeling by incorporating realistic photo-z distribution. We show that the position of the BAO scale in ξp is determined by the photo-z distribution and the Jacobian of the transformation. The latter diverges at the transverse scale of the separation s⊥, and it explains why ξp traces the underlying correlation function at s⊥, rather than s, when the photo-z uncertainty σz/(1+ z) ≳ 0.02. We also obtain the Gaussian covariance for ξp. Due to photo-z mixing, the covariance of ξp shows strong off-diagonal elements. The high correlation of the data causes some issues to the data fitting. None the less, we find that either it can be solved by suppressing the largest eigenvalues of the covariance or it is not directly related to the BAO. We test our BAO fitting pipeline using a set of mock catalogs. The data set is dedicated for Dark Energy Survey Year 3 (DES Y3) BAO analyses and includes realistic photo-z distributions. The theory template is in good agreement with mock measurement. Based on the DES Y3 mocks, ξp statistic is forecast to constrain the BAO shift parameter α to be 1.001 ± 0.023, which is well consistent with the corresponding constraint derived from the angular correlation function measurements. Thus, ξp offers a competitive alternative for the photometric data analyses.

79 ASTRONOMY AND ASTROPHYSICS↗

Dark Energy Survey Year 6 Results: Point-Spread Function Modeling

We present the point-spread function (PSF) modeling for weak lensing shear measurement using the full six years of the Dark Energy Survey (DES Y6) data. We review the PSF estimation procedure using the PIFF (PSFs In the Full FOV) software package and describe the key improvements made to PIFF and modeling diagnostics since the DES year three (Y3) analysis: (i) use of external Gaia and infrared photometry catalogs to ensure higher purity of the stellar sample used for model fitting, (ii) addition of color-dependent PSF modeling, the first for any weak lensing analysis, and (iii) inclusion of model diagnostics inspecting fourth-order moments, which can bias weak lensing measurements to a similar degree as second-order modeling errors. Through a comprehensive set of diagnostic tests, we demonstrate the improved accuracy of the Y6 models evident in significantly smaller systematic errors than those of the Y3 analysis, in which all g band data were excluded due to insufficiently accurate PSF models. For the Y6 weak lensing analysis, we include g band photometry data in addition to the riz bands, providing a fourth band for photometric redshift estimation. Looking forward to the next generation of wide-field surveys, we describe several ongoing improvements to PIFF, which will be the default PSF modeling software for weak lensing analyses for the Vera C. Rubin Observatory’s Legacy Survey of Space and Time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A SEARCH FOR ADDITIONAL PLANETS IN THE NASA EPOXI OBSERVATIONS OF THE EXOPLANET SYSTEM GJ 436

We present time series photometry of the M dwarf transiting exoplanet system GJ 436 obtained with the Extrasolar Planet Observation and Characterization (EPOCh) component of the NASA EPOXI mission. We conduct a search of the high-precision time series for additional planets around GJ 436, which could be revealed either directly through their photometric transits or indirectly through the variations these second planets induce on the transits of the previously known planet. In the case of GJ 436, the presence of a second planet is perhaps indicated by the residual orbital eccentricity of the known hot Neptune companion. We find no candidate transits with significance higher than our detection limit. From Monte Carlo tests of the time series, we rule out transiting planets larger than 1.5 R{sub +} interior to GJ 436b with 95% confidence and larger than 1.25 R{sub +} with 80% confidence. Assuming coplanarity of additional planets with the orbit of GJ 436b, we cannot expect that putative planets with orbital periods longer than about 3.4 days will transit. However, if such a planet were to transit, we would rule out planets larger than 2.0 R{sub +} with orbital periods less than 8.5 days with 95% confidence. We also place dynamical constraints on additional bodies in the GJ 436 system, independent of radial velocity measurements. Our analysis should serve as a useful guide for similar analyses of transiting exoplanets for which radial velocity measurements are not available, such as those discovered by the Kepler mission. From the lack of observed secular perturbations, we set upper limits on the mass of a second planet as small as 10 M{sub +} in coplanar orbits and 1 M{sub +} in non-coplanar orbits close to GJ 436b. We present refined estimates of the system parameters for GJ 436. We find P = 2.64389579 {+-} 0.00000080 d, R{sub *} = 0.437 {+-} 0.016 R{sub sun}, and R{sub p} = 3.880 {+-} 0.147 R{sub +}. We also report a sinusoidal modulation in the GJ 436 light curve that we attribute to star spots. This signal is best fit by a period of 9.01 days, although the duration of the EPOCh observations may not have been long enough to resolve the full rotation period of the star.

79 ASTRONOMY AND ASTROPHYSICS↗

Measuring quasar variability with Pan-STARRS1 and SDSS

We measure quasar variability using the Panoramic Survey Telescope and Rapid Response System 1 Survey (Pan-STARRS1 or PS1) and the Sloan Digital Sky Survey (SDSS) and establish a method of selecting quasars via their variability in 10{sup 4} deg{sup 2} surveys. We use 10{sup 5} spectroscopically confirmed quasars that have been well measured in both PS1 and SDSS and take advantage of the decadal timescales that separate SDSS measurements and PS1 measurements. A power law model fits the data well over the entire time range tested, 0.01-10 yr. Variability in the current PS1-SDSS data set can efficiently distinguish between quasars and nonvarying objects. It improves the purity of a griz quasar color cut from 4.1% to 48% while maintaining 67% completeness. Variability will be very effective at finding quasars in data sets with no u band and in redshift ranges where exclusively photometric selection is not efficient. We show that quasars' rest-frame ensemble variability, measured as a root mean squared in Δ magnitudes, is consistent with V(z, L, t) = A {sub 0}(1 + z){sup 0.37}(L/L {sub 0}){sup –0.16}(t/1 yr){sup 0.246}, where L {sub 0} = 10{sup 46} erg s{sup –1} and A {sub 0} = 0.190, 0.162, 0.147, or 0.141 in the g {sub P1}, r {sub P1}, i {sub P1}, or z {sub P1}filter, respectively. We also fit across all four filters and obtain median variability as a function of z, L, and λ as V(z, L, λ, t) = 0.079(1 + z){sup 0.15}(L/L {sub 0}){sup –0.2}(λ/1000 nm){sup –0.44}(t/1 yr){sup 0.246}.

79 ASTRONOMY AND ASTROPHYSICS↗

Long-term Spot Stability in the Post-common-envelope Binary QS Vir

We observed the post-common-envelope eclipsing binary with a white dwarf component, QS Vir, using the 1.88 m telescope of Kotammia Observatory in Egypt. The new observations were analyzed together with all multicolor light curves available online (sampling a period of 25 yr), using a full-feature binary system modeling software based on Roche geometry. This is the first time complete photometric modeling was done with most of these data. QS Vir is a detached system, with the red dwarf component underfilling its Roche lobe by a small margin. All light curves feature out-of-eclipse variability that is associated with ellipsoidal variation, mutual irradiation and irregularities in surface brightness of the tidally distorted and magnetically active red dwarf. We tested models with one, two, and three dark spots and found that one spot is sufficient to account for the light curve asymmetry in all data sets, although this does not rule out the presence of multiple spots. We also found that a single spotted model cannot fit light curves observed simultaneously in different filters. Instead, each filter requires a different spot configuration. To thoroughly explore the parameter space of spot locations, we devised a grid-search procedure and used it to find consistent solutions. Based on this, we conclude that the dark spot responsible for light curve distortions has been stable for the past 15 yr, after a major migration that happened between 1993 and 2002, possibly due to a flip-flop event.

79 ASTRONOMY AND ASTROPHYSICS↗

Metallicity of Galactic RR Lyrae from Optical and Infrared Light Curves. II. Period–Fourier–Metallicity Relations for First Overtone RR Lyrae

We present new period-$\phi$ 31 -[Fe/H] relations for first-overtone RRL stars (RRc), calibrated over a broad range of metallicities (–2.5 ≲ [Fe/H] ≲ 0.0) using the largest currently available set of Galactic halo field RRL with homogeneous spectroscopic metallicities. Our relations are defined in the optical (ASAS-SN V band) and, inaugurally, in the infrared (WISE W1 and W2 bands). Our V-band relation can reproduce individual RRc spectroscopic metallicities with a dispersion of 0.30 dex over the entire metallicity range of our calibrator sample (an rms smaller than what we found for other relations in literature including nonlinear terms). Our infrared relation has a similar dispersion in the low- and intermediate-metallicity range ([Fe/H] ≲ –0.5), but tends to underestimate the [Fe/H] abundance around solar metallicity. We tested our relations by measuring both the metallicity of the Sculptor dSph and a sample of Galactic globular clusters, rich in both RRc and RRab stars. The average metallicity we obtain for the combined RRL sample in each cluster is within ±0.08 dex of their spectroscopic metallicities. The infrared and optical relations presented in this work will enable deriving reliable photometric RRL metallicities in conditions where spectroscopic measurements are not feasible; e.g., in distant galaxies or reddened regions (observed with upcoming Extremely Large Telescopes and the James Webb Space Telescope), or in the large sample of new RRL that will be discovered in large-area time-domain photometric surveys (such as the LSST and the Roman space telescope).

79 ASTRONOMY AND ASTROPHYSICS↗

Dark Energy Survey Year 6 Results: Galaxy-galaxy lensing

We present galaxy--galaxy lensing (GGL) measurements from the full six years of data from the Dark Energy Survey (DES Y6), covering $4031\,\mathrm{deg}^2$ and used in the DES Y6 $3\times2$pt cosmological analysis. We use the MagLim++ lens sample, containing $\sim 9$ million galaxies divided into six redshift bins, and the Metadetection source catalog, including $\sim 140$ million galaxies divided into four redshift bins. The mean tangential shear signal achieves a total signal-to-noise ratio (S/N) of $173$, corresponding to a $17\%$ improvement over DES Y3. After applying the scale cuts used in the cosmological analysis, with $R_{\min}=6\,\mathrm{Mpc}/h$ ($4\,\mathrm{Mpc}/h$) for the linear (nonlinear) galaxy-bias model, the S/N is reduced to $75$ (90). A comprehensive suite of validation tests demonstrates that the measurement is robust against observational and astrophysical systematics at the statistical precision required for the DES Y6 analysis. Although not used in the main cosmological analysis, we extract high--signal-to-noise geometric shear-ratio measurements from the galaxy--galaxy lensing signal on small angular scales. These measurements provide an internal consistency check on the photometric redshift distributions and shear calibration used in the $3\times2$pt analysis.

Giannini, G. [Barcelona, IEEC; Chicago U., KICP; B↗

NEAR-INFRARED PHOTOMETRIC PROPERTIES OF 130,000 QUASARS: AN SDSS-UKIDSS-MATCHED CATALOG

We present a catalog of over 130,000 quasar candidates with near-infrared (NIR) photometric properties, with an areal coverage of approximately 1200 deg{sup 2}. This is achieved by matching the Sloan Digital Sky Survey (SDSS) in the optical ugriz bands to the UKIRT Infrared Digital Sky Survey (UKIDSS) Large Area Survey (LAS) in the NIR YJHK bands. We match the {approx}1 million SDSS DR6 Photometric Quasar catalog to Data Release 3 of the UKIDSS LAS (ULAS) and produce a catalog with 130,827 objects with detections in one or more NIR bands, of which 74,351 objects have optical and K-band detections and 42,133 objects have the full nine-band photometry. The majority ({approx}85%) of the SDSS objects were not matched simply because these were not covered by the ULAS. The positional standard deviation of the SDSS Quasar to ULAS matches is {delta}{sub R.A.} = 0.''1370 and {delta}{sub decl.} = 0.''1314. We find an absolute systematic astrometric offset between the SDSS Quasar catalog and the UKIDSS LAS, of |R.A.{sub offset}| = 0.''025 and |decl.{sub offset}| = 0.''040; we suggest the nature of this offset to be due to the matching of catalog, rather than image, level data. Our matched catalog has a surface density of {approx}53 deg{sup -2} for K {<=} 18.27 objects; tests using our matched catalog, along with data from the UKIDSS Deep Extragalactic Survey, imply that our limiting magnitude is i {approx} 20.6. Color-redshift diagrams, for the optical and NIR, show a close agreement between our matched catalog and recent quasar color models at redshift z {approx}< 2.0, while at higher redshifts, the models generally appear to be bluer than the mean observed quasar colors. The gJK and giK color spaces are used to examine methods of differentiating between stars and (mid-redshift) quasars, the key to currently ongoing quasar surveys. Finally, we report on the NIR photometric properties of high, z > 4.6, and very high, z > 5.7, redshift previously discovered quasars.

79 ASTRONOMY AND ASTROPHYSICS↗

Dark Energy Survey Year 6 results: Galaxy-galaxy lensing

Here, we present galaxy-galaxy lensing measurements from the full six years of data from the Dark Energy Survey (DES Y6), covering 4031 deg 2 and used in the DES Y6 3×2 pt cosmological analysis. We use the Maglim++ lens sample, containing ∼9 million galaxies divided into six redshift bins, and the Metadetection source catalog, including ∼140 million galaxies divided into four redshift bins. The mean tangential shear signal achieves a total signal-to-noise ratio (S/N) of 173, corresponding to a 17% improvement over DES Y3. After applying the scale cuts used in the cosmological analysis, with 𝑅 min =6 Mpc/ℎ (4 Mpc/ℎ) for the linear (nonlinear) galaxy-bias model, the S/N is reduced to 75 (90). A comprehensive suite of validation tests demonstrates that the measurement is robust against observational and astrophysical systematics at the statistical precision required for the DES Y6 analysis. Although not used in the main cosmological analysis, we extract high signal-to-noise geometric shear-ratio measurements from the galaxy-galaxy lensing signal on small angular scales. These measurements provide an internal consistency check on the photometric redshift distributions and shear calibration used in the 3 ×2 pt analysis.

cosmological parameters↗

A Pair of TESS Planets Spanning the Radius Valley around the Nearby Mid-M Dwarf LTT 3780

We present the confirmation of two new planets transiting the nearby mid-M dwarf LTT 3780 (TIC 36724087, TOI-732, V = 13.07, K {sub s} = 8.204, R {sub s} = 0.374 R {sub ⊙}, M {sub s} = 0.401 M {sub ⊙}, d = 22 pc). The two planet candidates are identified in a single Transiting Exoplanet Survey Satellite sector and validated with reconnaissance spectroscopy, ground-based photometric follow-up, and high-resolution imaging. With measured orbital periods of P {sub b} = 0.77, P {sub c} = 12.25 days and sizes r {sub p,b} = 1.33 ± 0.07, r {sub p,c} = 2.30 ± 0.16 R {sub ⊕}, the two planets span the radius valley in period–radius space around low-mass stars, thus making the system a laboratory to test competing theories of the emergence of the radius valley in that stellar mass regime. By combining 63 precise radial velocity measurements from the High Accuracy Radial velocity Planet Searcher (HARPS) and HARPS-N, we measure planet masses of m{sub p,b}=2.62{sub −0.46}{sup +0.48} and m{sub p,c}=8.6{sub −1.3}{sup +1.6} M {sub ⊕}, which indicates that LTT 3780b has a bulk composition consistent with being Earth-like, while LTT 3780c likely hosts an extended H/He envelope. We show that the recovered planetary masses are consistent with predictions from both photoevaporation and core-powered mass-loss models. The brightness and small size of LTT 3780, along with the measured planetary parameters, render LTT 3780b and c as accessible targets for atmospheric characterization of planets within the same planetary system and spanning the radius valley.

79 ASTRONOMY AND ASTROPHYSICS↗

The luminosities of the coldest brown dwarfs

In recent years, brown dwarfs have been extended to a new Y-dwarf class with effective temperatures colder than 500 K and masses in the range of 5-30 Jupiter masses. They fill a crucial gap in observable atmospheric properties between the much colder gas-giant planets of our own solar system (at around 130 K) and both hotter T-type brown dwarfs and the hotter planets that can be imaged orbiting young nearby stars (both with effective temperatures in the range of 1500-1000 K). Distance measurements for these objects deliver absolute magnitudes that make critical tests of our understanding of very cool atmospheres. Here we report new distances for nine Y dwarfs and seven very late T dwarfs. These reveal that Y dwarfs do indeed represent a continuation of the T-dwarf sequence to both fainter luminosities and cooler temperatures. They also show that the coolest objects display a large range in absolute magnitude for a given photometric color. The latest atmospheric models show good agreement with the majority of these Y-dwarf absolute magnitudes. This is also the case for WISE0855-0714, the coldest and closest brown dwarf to the Sun, which shows evidence for water ice clouds. However, there are also some outstanding exceptions, which suggest either binarity or the presence of condensate clouds. The former is readily testable with current adaptive optics facilities. The latter would mean that the range of cloudiness in Y dwarfs is substantial with most hosting almost no clouds—while others have dense clouds, making them prime targets for future variability observations to study cloud dynamics.

79 ASTRONOMY AND ASTROPHYSICS↗