Search NASA⌕ Search

SEARCH · Search NASA

Results for “Plot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Measurements of radioxenon activities during periods of gaseous release from an advanced gas-cooled reactor

Activities of radioxenon isotopes are reported from an Advanced Gas-cooled Reactor (AGR) during periods of gaseous release. Xenon isotopes are relevant to the monitoring regime of the Comprehensive Nuclear-Test-Ban Treaty (CTBT). These releases may affect detections from the International Monitoring System (IMS) by influencing the radioxenon background. Time series activity plots have been produced from both in-core monitoring and direct measurement at the point of release using a stack monitor system. Ratio plots using both data sets have been produced with results compared with a commonly chosen nuclear explosion “discrimination line.” The reported results improve the understanding of radionuclide emissions from civil nuclear power plants. This work is being performed as part of the Xenon Environmental Nuclide Analysis at Hartlepool (XENAH) collaboration between the Atomic Weapons Establishment (AWE, UK), EDF Energy (UK), Pacific Northwest National Laboratory (PNNL, USA), and the Swedish Defence Research Agency (FOI).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

EXAFS investigation of the local structure in URu 2-x Fe x Si 2 : Evidence for distortions below 100 K

X-ray absorption measurements at the U L III , Ru K , and Fe K edges are reported for the hidden order (HO) material URu 2 - x Fe x Si 2 ( x = 0 , 0.05, 0.08, 0.10, 0.12, 0.15, and 0.20) as a function of x and temperature T . Furthermore, when Fe is substituted for Ru, the local structure about Fe shrinks slightly and the first neighbor Fe-Si bond length decreases by ≈ 0.05 Å . More importantly excess disorder is observed below 80–100 K (the coherence temperature T * ) in plots of the Debye-Waller factor σ 2 ( σ is the width of the pair distribution function); at low T the data deviate from the usual Einstein or correlated-Debye model plots. This excess disorder is most prominent for the Ru-Si bond, and σ 2 actually increases below 80 K. These results suggest a local orthorhombic distortion with B 1 g -like symmetry that develops below 80–100 K. A model that describes these local distortions is presented, and discussed in terms of other measurements that indicate a breaking of fourfold symmetry at low T . In addition, the square root of the difference between σ 2 ( T ) for the Ru-Si pair and a Debye fit to these data serves as an order parameter for this orthorhombic distortion, in the temperature range below 100 K. This quantity is a length related to a - b , the difference between the a and b lattice constants in the orthorhombic phase, and provides a connection between this distortion and T * . X-ray absorption near edge structure (XANES) measurements also show that there are no changes in the edge positions down to 0.1 eV for any edge as a function of x , for T in the HO regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Critical behavior in monoclinic Cr 3 ⁢Te 4

High-quality monoclinic Cr 3 ⁢Te 4 crystals are synthesized by the chemical vapor transport method and confirmed by synchrotron powder x-ray diffraction. Critical behaviors of Cr 3 ⁢Te 4 are studied by bulk isothermal magnetization measurements around its paramagnetic to ferromagnetic phase transition. From these data, we evaluate the modified Arrott plot, the Kouvel-Fisher plot, and critical isotherms, and estimate critical exponent values of β~0.3827, γ~1.2119, and δ~4.16, and the Curie temperature T C ≈321 K. After the scaling, the isothermal magnetization curves below and above the critical temperatures collapse into two independent universal branches which signifies the reliability of our critical exponent estimation. Finally, the estimated critical exponent values of Cr 3 ⁢Te 4 do not match well with theoretically calculated values of any three-dimensional models.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Net-proton fluctuations influenced by baryon stopping and quark deconfinement

Preliminary data from the Beam-Energy Scan II measurements by the STAR Collaboration at the Relativistic Heavy Ion Collider suggest a dip in the fourth-to-second-order cumulant ratio when plotted vs beam energy. At the same energy range where the structure appears, a transition from hadrons to quarks is expected, the deconfinement transition. In this paper, the role of quark deconfinement in establishing fluctuations in the early stages of the collision is considered. Two models are compared: one with stopping occurring on a baryon-by-baryon basis, and a second where stopping proceeds through quark degrees of freedom. In the latter model, the fluctuation of baryon number is significantly reduced and this signal is found to survive recombination into hadrons and the subsequent diffusion. The transformation from baryon to quark stopping thus produces a dip in the fourth-to-second-order cumulant ratio when plotted vs beam energy, consistent with observations.

Baryons↗
DOE OSTI2020

Dalitz analysis of $D^0 → K^–π^+η$ decays at Belle

We present the results of the first Dalitz plot analysis of the decay D 0 → K – π + η . The analysis is performed on a data set corresponding to an integrated luminosity of 953 fb – 1 collected by the Belle detector at the asymmetric-energy e + e – KEKB collider. The Dalitz plot is well described by a combination of the six resonant decay channels K ¯ * ( 892 ) 0 η , K – a 0 ( 980 ) + , K – a 2 ( 1320 ) + , K ¯ * ( 1410 ) 0 η , K * ( 1680 ) – π + and K 2 * ( 1980 ) – π + , together with K π and K η S-wave components. The decays K * ( 1680 ) – → K – η and K 2 * ( 1980 ) – → K – η are observed for the first time. We measure ratio of the branching fractions, B ( D 0 → K – π + η ) B ( D 0 → K – π + ) = 0.500 ± 0.002 ( stat ) ± 0.020 ( syst ) ± 0.003 ( B PDG ) . Using the Dalitz fit result, the ratio B ( K * ( 1680 ) → K η ) B ( K * ( 1680 ) → K π ) is measured to be 0.11 ± 0.02 ( stat ) – 0.04 + 0.06 ( syst ) ± 0.04 ( B PDG ) ; this is much lower than the theoretical expectations ( ≈ 1 ) made under the assumption that K * ( 1680 ) is a pure 1 3 D 1 state. The product branching fraction B ( D 0 → [ K 2 * ( 1980 ) – → K – η ] π + ) = ( 2. 2 – 1.9 + 1.7 ) × 10 – 4 is determined. In addition, the π η ' contribution to the a 0 ( 980 ) ± resonance shape is confirmed with 10.1 σ statistical significance using the three-channel Flatté model. We also measure B ( D 0 → K ¯ * ( 892 ) 0 η ) = ( 1.4 1 – 0.12 + 0.13 ) % . This is consistent with, and more precise than, the current world average ( 1.02 ± 0.30 ) % , deviates with a significance of more than 3 σ from the theoretical predictions of (0.51–0.92)%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Dijet and electroweak limits on a Z ′ boson coupled to quarks

An insightful way of presenting the LHC limits on dijet resonances is the coupling-mass plot for a Z ′ boson that has flavor-independent quark interactions. This also illustrates the comparison of low-mass LHC sensitivity with constraints on the flavor-independent Z ′ boson from electroweak and quarkonium measurements. To derive these constraints, we compute the Z ′ mixing with the Z , the photon, and the ϒ meson, emphasizing the logarithmic dependence on the masses of the new electroweak-charged fermions (“anomalons”) required to cancel the gauge anomalies. We update the coupling-mass plot, extending it for Z ′ masses from 5 GeV to 5 TeV. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Overall protein structure quality assessment using hydrogen-bonding parameters

Atomic model refinement at low resolution is often a challenging task. This is mostly because the experimental data are not sufficiently detailed to be described by atomic models. To make refinement practical and ensure that a refined atomic model is geometrically meaningful, additional information needs to be used such as restraints on Ramachandran plot distributions or residue side-chain rotameric states. However, using Ramachandran plots or rotameric states as refinement targets diminishes the validating power of these tools. Therefore, finding additional model-validation criteria that are not used or are difficult to use as refinement goals is desirable. Hydrogen bonds are one of the important noncovalent interactions that shape and maintain protein structure. These interactions can be characterized by a specific geometry of hydrogen donor and acceptor atoms. Systematic analysis of these geometries performed for quality-filtered high-resolution models of proteins from the Protein Data Bank shows that they have a distinct and a conserved distribution. Here, it is demonstrated how this information can be used for atomic model validation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Transformer Leakage Inductance Design Methodology

The leakage inductance exhibited by a transformer depends on its winding geometry, which generally involves the selection of several key design parameters in addition to the winding structure and the interleaving configuration. With few resources explaining the effects of these design choices on the observed leakage inductance, numerous trial-and-error iterations become necessary to realize the desired leakage inductance. This paper explores more than a hundred winding geometries feasible in a 2-winding transformer comprising the same magnetic core, number of turns, and wire gauge, and finds the leakage inductance for each unique design using 2-D finite element method (FEM) simulations in association with the semi-analytical double- 2-D model. These leakage inductances are plotted and further analyzed to understand the effects of different design parameters on the effective leakage inductance. The results presented herein and the conclusions drawn from this research can serve as a valuable resource for future design practitioners from both industry and academia.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Thermal Management System for an Electric Machine with Additively Manufactured Hollow Conductors with Integrated Heat Pipes: Preprint

This paper discusses steps taken to size a thermal management system for an aircraft propulsion electric machine containing additively manufactured coils integrated with heat pipes aimed at boosting its specific power. Experimental setups are used to size and characterize heat pipes for the application and 3D thermal FEA is used to determine optimum heat transfer coefficient of convective boundaries. Geometric details of fin-based surface area enhancement required to reach target combined overall heat transfer coefficient (U) and surface area (A) performance (UA) in W/K, is worked out for relevant boundaries and the resulting UA is verified in 3D thermal FEA. Thermal management system's UA (by extension specific power) sensitivity to coolant temperature is explored and temperature distribution plots of optimized machine components are presented and discussed.

additive manufacturing↗
DOE OSTI2025

Visualization of Noisy and Less Noisy Computational Basis States in Quantum Computing

Quantum computing technology holds substantial promise as a reliable computational paradigm. However, current noisy intermediate scale quantum (NISQ) systems, are significantly impacted by noise originating from hardware inconsistencies. This noise causes errors and lowers output fidelity. So we must find which basis states cause errors. However, there are two main challenges in analyzing noise corresponding to basis states. First, the noise distribution data is high dimensional in nature, thereby making its analysis challenging. Second, although functional box plots have been used in the state of the art research to understand such a high dimensional data, they suffer from clutter and occlusion issues because of overplotting. In this study, we introduce an innovative visualization pipeline to address the aforementioned challenges to provide a clear depiction of noisy and less-noisy basis states. Specifically, our proposed visualization pipeline comprises three stages namely, low dimensional embedding, clustering, and violin plot visualization, to reduce visual clutter and effectively analyze high-dimensional noise distribution data. Our analysis uses quantum machine learning (QML) circuits as case study for drawing a distinction between noisy and less noisy basis states.

Senapati, Priyabrata [Kent State University]↗
DOE OSTI2021

Scalable Comparative Visualization of Ensembles of Call Graphs

Optimizing the performance of large-scale parallel codes is critical for efficient utilization of computing resources. Code developers often explore various execution parameters, such as hardware configurations, system software choices, and application parameters, and are interested in detecting and understanding bottlenecks in different executions. They often collect hierarchical performance profiles represented as call graphs, which combine performance metrics with their execution contexts. The crucial task of exploring multiple call graphs together is tedious and challenging because of the many structural differences in the execution contexts and significant variability in the collected performance metrics (e.g., execution runtime). In this paper, we present Ensemble CallFlow to support the exploration of ensembles of call graphs using new types of visualizations, analysis, graph operations, and features. We introduce ensemble-Sankey , a new visual design that combines the strengths of resource-flow (Sankey) and box-plot visualization techniques. Whereas the resource-flow visualization can easily and intuitively describe the graphical nature of the call graph, the box plots overlaid on the nodes of Sankey convey the performance variability within the ensemble. Our interactive visual interface provides linked views to help explore ensembles of call graphs, e.g., by facilitating the analysis of structural differences, and identifying similar or distinct call graphs. Finally, we demonstrate the effectiveness and usefulness of our design through case studies on large-scale parallel codes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Climate, soil mineralogy and mycorrhizal fungi influence soil organic matter fractions in eastern US temperate forests

Identifying the primary controls of particulate (POM) and mineral-associated organic matter (MAOM) content in soils is critical for determining future stocks of soil carbon (C) and nitrogen (N) across the globe. However, drivers of these soil organic matter fractions are likely to vary among ecosystems in response to climate, soil type and the composition of local biological communities. We tested how soil factors, climate and plant–fungal associations influenced the distribution and concentrations of C and N in MAOM and POM in seven temperate forests in the National Ecological Observatory Network (NEON) across the eastern United States. Samples of upper mineral horizon soil within each forest were collected in plots representing a gradient of dominant tree–mycorrhizal association, allowing us to test how plant and microbial communities influenced POM and MAOM across sites differing in climate and soil conditions. We found that concentrations of C and N in soil organic matter were primarily driven by soil mineralogy, but the relative abundance of MAOM versus POM C was strongly linked to plot-level mycorrhizal dominance. Furthermore, the effect of dominant tree mycorrhizal type on the distribution of N among POM and MAOM fractions was sensitive to local climate: in cooler sites, an increasing proportion of ectomycorrhizal-associated trees was associated with lower proportions of N in MAOM, but in warmer sites, we found the reverse. As an indicator of soil carbon age, we measured radiocarbon in the MAOM fraction but found that within and across sites, Δ 14 C was unrelated to mycorrhizal dominance, climate, or soil factors, suggesting that additional site-specific factors may be primary determinants of long-term SOM persistence. Our results indicate that while soil mineralogy primarily controls SOM C and N concentrations, the distribution of SOM among density fractions depends on the composition of vegetation and microbial communities, with these effects varying across sites with distinct climates. Here we also suggest that within biomes, the age of mineral-associated soil carbon is not clearly linked to the factors that control concentrations of MAOM C and N.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Aridity and forest age mediate landscape scale patterns of tropical forest resistance to cyclonic storms

Abstract Cyclonic storms, or hurricanes, are expected to intensify as ocean heat energy rises due to climate change. Ecological theory suggests that tropical forest resistance to hurricanes should increase with forest age and wood density. However, most data on hurricane effects on tropical forests come from a limited number of well‐studied long‐term monitoring sites, restricting our capacity to evaluate the resistance of tropical forests to hurricanes across broad environmental gradients. In this study, we assessed whether forest age and aridity mediate the effects of hurricanes Irma and Maria in Puerto Rico, Vieques and Culebra islands. We leveraged functional trait data for 410 tree species, remotely sensed measurements of canopy height and cover, along with data on forest stand characteristics of 180 of 338 forest monitoring plots, each covering an area of 0.067 ha. The plots represent a broad mean annual precipitation (MAP) gradient from 701 to 4598 mm and a complex mosaic of forest age from 5 to around 85 years since deforestation. Hurricanes resulted in a 25% increase in basal area mortality rates, a 45% decrease in canopy height and a 21% reduction in canopy cover. These effects intensified with forest age, even after considering proximity to the hurricane path. The links between forest age and hurricane disturbances were likely due the prevalence of tall canopies. Tall forest canopies were strongly linked with low community‐weighted wood density (WD). These characteristics were on average more common in moist and wet forests (MAP >1250 mm). Conversely, dry forests were dominated by short species with high wood density (WD > 0.6 g cm −3 ) and did not show significant increases in basal area mortality rates after the hurricanes. Synthesis . Our findings show that selection towards drought‐tolerant traits across aridity gradients, such as short stature and dense wood, enhances resistance to hurricanes. However, forest age modulated responses to hurricanes, with older forests being less resistant across the islands. This evidence highlights the importance of considering the intricate links between ecological succession and plant function when forecasting tropical forests’ responses to increasingly strong hurricanes.

Vargas G., German↗
DOE OSTI2025

Seeing the forest for all the trees: Mycorrhizal‐associated nutrient economies are modulated by stem density and the synchrony between overstorey and understorey communities

1. Identifying relationships between plant communities and soil characteristics is a critical step in understanding the consequences of species gains and losses in ecosystems. The mycorrhizal associated nutrient economy (MANE) hypothesis predicts that the degree to which tree species and their mycorrhizal associates affect soil properties is driven by the relative dominance of different mycorrhizal types (often measured by relative basal area). While this approach emphasizes the importance of canopy trees, it does not account for how other factors (e.g. the density and composition of understorey trees) may alter tree–soil relationships. 2. We analysed tree–soil data from an eastern deciduous forest in southern Indiana, USA that contains >29,000 georeferenced stems, including 21 species that associate with arbuscular mycorrhizal (AM) fungi and 14 that associate with ectomycorrhizal (ECM) fungi. We sampled soils (upper 5 cm) from across the plot and modelled soil characteristics to tree communities. Given differences in soil characteristics among AM-dominated and ECM-dominated neighbourhoods, we hypothesized that relationships between tree-mycorrhizal dominance and soils would be affected by both the density of stems in the plot (owing to ‘Zinke’ individual plant effects) and composition of the understorey trees (owing to ‘trait divergence effects’) 3. In support of our Zinke hypothesis, we found that the relationships between tree-mycorrhizal dominance and soil variables (soil pH, nitrification rates and carbon to nitrogen ratio) were strengthened as stand density increased. In support of the trait divergence hypothesis, we found that as the mismatch between overstorey and understorey composition increased (e.g. AM-dominated understories beneath ECM-dominated overstories and vice versa), the relationship between tree dominance and soil variables weakened. We were able to use these insights to create mycorrhizal metrics to predict soil variables that were sensitive to the structural composition of neighbourhoods. 4. Synthesis. Our results indicate that relationships between plants and soils in forests are not only shaped by dominant overstorey trees but also the density and composition of understorey trees. Thus, efforts to predict the ecosystem consequences of species gains and losses may benefit from considering these elements of forest structure and not only the basal area of the dominant trees.

MANE framework↗
DOE OSTI2021

The influence of alfalfa-switchgrass intercropping on microbial community structure and function

The use of nitrogen fertilizer on bioenergy crops such as switchgrass results in increased costs, nitrogen leaching and emissions of N 2 O, a potent greenhouse gas. Intercropping with nitrogen-fixing alfalfa has been proposed as an environmentally sustainable alternative, but the effects of synthetic fertilizer versus intercropping on soil microbial community functionality remain uncharacterized. Here we analysed 24 metagenomes from the upper soil layer of agricultural fields from Prosser, WA over two growing seasons and representing three agricultural practices: unfertilized switchgrass (control), fertilized switchgrass and switchgrass intercropped with alfalfa. The synthetic fertilization and intercropping did not result in major shifts of microbial community taxonomic and functional composition compared with the control plots, but a few significant changes were noted. Most notably, mycorrhizal fungi, ammonia-oxidizing archaea and bacteria increased in abundance with intercropping and fertilization. However, only betaproteobacterial ammonia-oxidizing bacteria abundance in fertilized plots significantly correlated to N 2 O emission and companion qPCR data. Collectively, a short period of intercropping elicits minor but significant changes in the soil microbial community toward nitrogen preservation and that intercropping may be a viable alternative to synthetic fertilization.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Demographic composition, not demographic diversity, predicts biomass and turnover across temperate and tropical forests

The growth and survival of individual trees determine the physical structure of a forest with important consequences for forest function. However, given the diversity of tree species and forest biomes, quantifying the multitude of demographic strategies within and across forests and the way that they translate into forest structure and function remains a significant challenge. Here, we quantify the demographic rates of 1961 tree species from temperate and tropical forests and evaluate how demographic diversity (DD) and demographic composition (DC) differ across forests, and how these differences in demography relate to species richness, aboveground biomass (AGB), and carbon residence time. We find wide variation in DD and DC across forest plots, patterns that are not explained by species richness or climate variables alone. There is no evidence that DD has an effect on either AGB or carbon residence time. Rather, the DC of forests, specifically the relative abundance of large statured species, predicted both biomass and carbon residence time. Our results demonstrate the distinct DCs of globally distributed forests, reflecting biogeography, recent history, and current plot conditions. Linking the DC of forests to resilience or vulnerability to climate change, will improve the precision and accuracy of predictions of future forest composition, structure, and function.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Intra‐ and inter‐annual variability of nitrification in the rhizosphere of field‐grown bioenergy sorghum

Abstract Biological nitrification inhibition (BNI) and plant–microbe competition for ammonium (NH 4 + ) by sorghum ( Sorghum bicolor (L.) Moench) have the potential to suppress nitrification, reducing nitrate (NO 3 − ) and nitrous oxide (N 2 O) production for more sustainable bioenergy feedstock production. However, it is unknown how variability in environmental factors, field management, and plant growth affect the suppression of nitrification. We conducted a field trial with four genotypes of energy sorghum and four fertilization rates in central Illinois, USA, and measured soil N pools, potential nitrification and denitrification rates, and microbial community composition in bulk and rhizosphere soils to assess nitrification suppression throughout the 2018 and 2019 growing seasons. Concentrations of NO 3 − and NH 4 + were very low in rhizosphere soil regardless of fertilization level, suggesting strong N demand by plants and microbes. Potential nitrification was lower in the rhizosphere soil than bulk soil, and this suppression was strongest mid‐season ~2 months after planting in both years (20% suppression in 2018 and 58% in 2019). Since precipitation was lower during the mid‐growing season of 2019 compared to 2018, we speculate that hydrophilic BNI root exudates accumulated in the rhizosphere and suppressed nitrification more than in 2018 when soil moisture was higher. Unfertilized plots had greater nitrification suppression than fertilized plots during the mid‐season in 2018, but otherwise nitrification suppression was insensitive to fertilizer treatment. Potential denitrification was stimulated in the rhizosphere compared to bulk soil in both study years, suggesting that heterotrophic activity was stimulated by plant carbon inputs, possibly further suppressing slower‐growing chemoautotrophic nitrifying microbes. Overall, we found inter‐ and intra‐annual variation in nitrification suppression in the rhizosphere of field‐grown biomass sorghum, suggesting that plant phenology and environmental conditions should be considered when devising strategies to improve the nitrogen sustainability of this annual bioenergy crop.

09 BIOMASS FUELS↗
DOE OSTI2025

Aboveground Rather Than Belowground Productivity Drives Variability in Miscanthus × giganteus Net Primary Productivity

Quantifying the carbon (C) uptake of Miscanthus × giganteus ( M × g ) in both aboveground and belowground structures (e.g., net primary productivity (NPP)) and differences among methodological approaches is crucial. Our objectives were to directly measure Mxg NPP and evaluate the effects of nitrogen application, location, and belowground biomass sampling methods. We hypothesize that increased nitrogen application increases the overall NPP of M × g and that quantifying rhizome biomass using excavations will produce the lowest variability between replicates. We collected biomass from mature M × g stands from three locations in Iowa with three nitrogen application rates and one site in Illinois. We destructively sampled at two time points, when rhizome mass is anticipated to be at a minimum (initial) and anticipated to be at its maximum (peak). Biomass was collected from 1 × 1 m quadrats in which one in-clump and one beside-clump cores were collected and then excavated to 30 cm depth to extract all rhizomes. We found that aboveground M × g NPP ranged from 15.4 Mg DM ha –1 year –1 to 36.4 Mg DM ha –1 year–1 and belowground M × g NPP ranged from 4.4 Mg DM ha –1 year –1 to 19.6 Mg DM ha –1 year –1 . M × g NPP varied across sites, fertilization, and calculation assumptions. Aboveground NPP (yield) was on average 68.7% of the total NPP. Root-to-shoot ratios at peak biomass decreased with nitrogen application rate, from an average of 1.9 for 0 N plots to 0.89 for 224 N fertilized plots. There was more variation in core data than from excavations; however, when in-clump and beside-clump cores were averaged together, core and excavation averages were not different. Overall, these results show that the range of mature M × g NPP is driven by aboveground productivity, influenced by nitrogen application and site. Our results provide useful data to constrain agro-ecosystem models and provide crucial insights for future perennial belowground sampling.

Hartman, Theodore [Univ. of Illinois at Urbana-Cha↗