Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pulse shaping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Description of a subset of single events from the BATSE gamma ray burst data

About 15 percent of the gamma ray bursts in the Burst and Transient Source Experiment (BATSE) data exhibit a simple light curve consisting mainly of a single pulse without fine substructures. In 12 of the burst profiles, the pulse shapes show a linear rise and decay. Three events have a distinct sharp rise followed by a long, almost exponential decay. Searches based on only a sharp rise selection criterion resulted in five more grbs with different profile complexities. In one case, we identify an envelope of fast oscillations with a long, softer tail lasting about 100 seconds. The majority of events were detectable at energies above 300 keV, with tentative estimates for fluences that vary between 4.0 x 10(exp -8) and 5.4 x 10(exp -6) ergs/sq cm. We describe here their general characteristics (durations, rise-decay times) and their hardness ratios.

Kouveliotou, Chryssa↗
NASA NTRS1990

A satellite mobile communication system based on Band-Limited Quasi-Synchronous Code Division Multiple Access (BLQS-CDMA)

Discussed here is a new approach to code division multiple access applied to a mobile system for voice (and data) services based on Band Limited Quasi Synchronous Code Division Multiple Access (BLQS-CDMA). The system requires users to be chip synchronized to reduce the contribution of self-interference and to make use of voice activation in order to increase the satellite power efficiency. In order to achieve spectral efficiency, Nyquist chip pulse shaping is used with no detection performance impairment. The synchronization problems are solved in the forward link by distributing a master code, whereas carrier forced activation and closed loop control techniques have been adopted in the return link. System performance sensitivity to nonlinear amplification and timing/frequency synchronization errors are analyzed.

Degaudenzi, R.↗
NASA NTRS1990

Imaging proportional counters for the stellar X-ray polarimeter

The xenon-filled IPCs being developed for the Stellar X-ray Polarimeter are described. The requirements placed on the IPCs by the design of the polarimeter are discussed and results on the performance of prototype counters are presented. The design of a prototype of the IPCs is described. Finally, the performance of the prototype is reported. Due to the extremely low count rates encountered in X-ray polarimetry, efficient background rejection is the most critical parameter of the IPCs. Using a background rejection scheme employing anticoincidence and pulse shape discrimination, a rejection efficiency of 99 percent has been achieved for Co-60-induced events over an energy range of 2 to 15 keV while retaining more than 80 percent of the X-ray efficiency.

Watkins, R. B., Jr.↗
NASA NTRS1992

Rosat sky survey observations of the eclipsing binary V471 Tauri

Rosat observations of the DA white dwarf + K2V binary system V471 Tauri, obtained during the sky survey phase of the mission, are presented. A lower amplitude shorter time-scale variability is seen in both the soft X-ray and EUV bands. This is associated with the white dwarf pulsations previously discovered by Exosat and also observed at optical wavelengths. The minimum in the EUV light curve is found to coincide with the maximum in the optical. This direct comparison of the phases of the optical and EUV pulses confirms the prediction made by an earlier indirect comparison and shows conclusively that the V471 Tau oscillations cannot arise from nonradial g-mode pulsations in the white dwarf. They are argued to be caused by rotation of the white dwarf with accretion-darkened magnetic poles. On the basis of the EUV and optical pulse shapes, the accretion geometry is studied, and it is estimated that the rate of accretion onto the white dwarf is about (4-11) x 10 exp -13 solar mass/yr.

Barstow, M. A.↗
NASA NTRS1992

The polar cap structure of the X-ray pulsar 4U 1538 - 52

We compare the pulse-phase-dependent spectral observations of 4U 1538 - 52 obtained from Ginga to a series of static model atmospheres of curved accreting polar caps, utilizing a magnetized radiative transfer code with relativistic polarized cross sections. A chi-squared fit was performed on the symmetrized pulse shapes, allowing the parameters of the two polar caps to vary independently. We find evidence for a significant difference between the caps, both in terms of opening angle and temperature, while the optical depth is similar and compatible with radiative deceleration models. The polar caps appear larger than what is usually estimated from dipole fields, and are not located at the antipodes of each other. A broader distribution of magnetic fields is required than expected from a dipolar field at constant radius. If the magnetic field is indeed dipolar, it should be off-center in respect to the star and the accretion shock height exhibits an unusual dependence on the polar angle. An alternative possibility is that the magnetic field is disordered on scales small compared to the polar cap radius.

Bulik, T.↗
NASA NTRS1992

A proposed study of multiple scattering through clouds up to 1 THz

A rigorous computation of the electromagnetic field scattered from an atmospheric liquid water cloud is proposed. The recent development of a fast recursive algorithm (Chew algorithm) for computing the fields scattered from numerous scatterers now makes a rigorous computation feasible. A method is presented for adapting this algorithm to a general case where there are an extremely large number of scatterers. It is also proposed to extend a new binary PAM channel coding technique (El-Khamy coding) to multiple levels with non-square pulse shapes. The Chew algorithm can be used to compute the transfer function of a cloud channel. Then the transfer function can be used to design an optimum El-Khamy code. In principle, these concepts can be applied directly to the realistic case of a time-varying cloud (adaptive channel coding and adaptive equalization). A brief review is included of some preliminary work on cloud dispersive effects on digital communication signals and on cloud liquid water spectra and correlations.

Gerace, G. C.↗
NASA NTRS1991

Bandwidth requirements for direct detection optical communication receivers with PPM signaling

The performance of a direct detection optical communication receiver for pulse position modulation (PPM) signal formats which contains an avalanche photodiode photodetector is calculated as a function of the parameters which characterize a raised cosine filter used in the receiver. It is shown that the performance penalty of this receiver relative to that of an optimal receiver which contains an integrator and assumes a perfectly rectangular PPM pulse shape is less than 1 dB at a receiver bit error rate of 10 exp -6. The advantage of the raised cosine filter is that the electrical bandwidth required is no more than one-half that of the integrator, that is, 1/tau as opposed to 2/tau where tau is the PPM time slot duration.

Davidson, Frederic M.↗
NASA NTRS1993

Plasma-puff initiation of high Coulomb transfer switches

The plasma-puff triggering mechanism based on a hypocycloidal pinch geometry was investigated to determine the optimal operating conditions for an azimuthally uniform surface flashover which initiates plasma-puff under wide ranges of fill gas pressures of Ar, He and N2. The optimal fill gas pressures for the azimuthally uniform plasma-puff were about 120 mTorr less than P(opt) less than 450 Torr for He and N2. For Argon 120 mTorr less than P(opt) less than 5 Torr for argon. The inverse pinch switch was triggered with the plasma-puff and the switching capability under various electrical parameters and working gas pressures of Ar, He and N2 was determined. It was also shown that the azimuthally uniform switching discharges were dependent on the type of fill gas and its fill pressure. A new concept of plasma-focus driven plasma-puff was also discussed in comparison with hypocycloidal pinch plasma-puff triggering. The main discharge of the inverse pinch switch with the plasma-focus driven plasma-puff trigger is found to be more azimuthally uniform than that with the hypocycloidal pinch plasma-puff trigger in a gas pressure region between 80 mTorr and 1 Torr. In order to assess the effects of plasma current density on material erosion of electrodes, emissions from both an inverse-pinch plasma switch (INPIStron) and from a spark gap switch under test were studied with an optical multichannel analyzer (OMA). The color temperature of the argon plasma was approximately 4,000 K which corresponded with the peak continuum emission near 750 nm. There are the strong line emissions of argon in the 650 - 800 nm range and a lack of line emissions of copper and other solid material used in the switch. This indicates that the plasma current density during closing is low and the hot spot or hot filament in the switch is negligible. This result also indicates considerable reduction of line emission with the INPIStron switch over that of a spark-gap switch. However, a strong carbon line emission exists due to vaporization of the plastic insulator used. In order to reduce the vaporization of the insulator, the plexiglass insulating material of INPIStron was replaced with Z-9 material. A comparative study of the INPIStron and a spark gap also reveals that the INPIStron, with a low impedance of Z equals 9 ohms, can transfer a high voltage pulse with a superior pulse-shape fidelity over that of a spark gap with Z equals 100 ohms.

Venable, D. D.↗
NASA NTRS1993

Plasma-puff initiation of high Coulomb transfer switches

The plasma-puff triggering mechanism based on a hypocycloidal pinch geometry was investigated to determine the optimal operating conditions for an azimuthally uniform surface flashover which initiates plasma-puff under wide ranges of fill gas pressures of Ar, He and N2. The optimal fill gas pressures for the azimuthally uniform plasma-puff were about 120 mTorr less than P(sub opt) less than 450 Torr for He and N2. For Argon 20 mTorr is less than P(sub opt) is less than 5 Torr. The inverse pinch switch was triggered with the plasma-puff and the switching capability under various electrical parameters and working gas pressures of Ar, He and N2 was determined. It was also shown that the azimuthally uniform switching discharges were dependent on the type of fill gas and its fill pressure. A new concept of plasma-focus driven plasma-puff was also discussed in comparison with hypocycloidal pinch plasma-puff triggering. The main discharge of the inverse pinch switch with the plasma-focus driven plasma-puff trigger is found to be more azimuthally uniform than that with the hypocycloidal pinch plasma-puff trigger in a gas pressure region between 80 mTorr and 1 Torr. In order to assess the effects of plasma current density on material erosion of electrodes, emissions from both an inverse-pinch plasma switch (INPIStron) and from a spark gap switch under test were studied with an optical multichannel analyzer (OMA). The color temperature of the argon plasma was approximately 4,000 K which corresponded with the peak continuum emission near 750 nm. There are the strong line emissions of argon in the 650 - 800 nm range and a lack of line emissions of copper and other solid material used in the switch. This indicates that the plasma current density during closing is low and the hot spot or hot filament in the switch is negligible. This result also indicates considerable reduction of line emission with the INPIStron switch over that of a spark-gap switch. However, a strong carbon line emission exists due to vaporization of the plastic insulator used. In order to reduce the vaporization of the insulator, the plexiglass insulating material of INPIStron was replaced with Z-9 material. A comparative study of the INPIStron and a spark gap also reveals that the INPIStron, with a low impedance of Z = 9 ohms, can transfer a high voltage pulse with a superior pulse-shape fidelity over that of a spark gap with Z = 100 ohms.

Han, Kwang S.↗
NASA NTRS1992

Photovoltaic cells for laser power beaming

To better understand cell response to pulsed illumination at high intensity, the PC-1DC finite-element computer model was used to analyze the response of solar cells to pulsed laser illumination. Over 50% efficiency was calculated for both InP and GaAs cells under steady-state illumination near the optimum wavelength. The time-dependent response of a high-efficiency GaAs concentrator cell to a laser pulse was modelled, and the effect of laser intensity, wavelength, and bias point was studied. Designing a cell to accommodate pulsed input can be done either by accepting the pulsed output and designing a cell to minimize adverse effects due to series resistance and inductance, or to design a cell with a long enough minority carrier lifetime, so that the output of the cell will not follow the pulse shape. Two such design possibilities are a monolithic, low-inductance voltage-adding GaAs cell, or a high-efficiency, light-trapping silicon cell. The advantages of each design will be discussed.

Landis, Geoffrey A.↗
NASA NTRS1994

The Influence of Finite-size Sources in Acousto-ultrasonics

This work explores the effects that the finite normal axisymmetric traction loading of an infinite isotropic plate has on wave propagation in acousto-ultrasonics (AU), in which guided waves are created using two normal incidence transducers. Although the work also addresses the effects of the transducer pressure distribution and pulse shape, this thesis concentrates on two main questions: how does the transducer's diameter control the phase velocity and frequency spectrum of the response, and how does the plate thickness relate to the plate's excitability? The mathematics of the time-harmonic solution and the physical principles and the practical considerations for AU wave generation are explained. Transient sources are modeled by the linear superposition of the time-harmonic solutions found using the Hankel transform and they are then compared to experimental data to provide insight into the relation between the size of the transducer and the preferred phase velocity.

Pavlakovic, Brian N.↗
NASA NTRS1994

Timing behavior of 96 radio pulsars

We present results from observations of 104 pulsars made between 1989 August and 1993 April, including timing solutions for 96 of them. Pulse profiles were recorded at four frequencies in the range 0.4-1.64 GHz, yielding topocentric pulse arrival times with uncertainties of order 10(exp -3) periods. Models fitted to the timing data yield accurate positions, periods, period derivatives, and dispersion measures for each pulsar. Nine of the measured period derivatives are new, and most of the parameters represent improvements upon previous measurements. In a few cases we correct some erroneous parameter values from the published literature. A glitch was observed in the PSR B1800-21 pulse arrival times, and we fit a simple exponential model to the post-glitch recovery. We present graphs of the observed pulse shapes and their evolution with frequency, a table of measured pulase widths, and quantitative estimates of the long-term timing stability of each pulsar.

Arzoumanian, Z.↗
NASA NTRS1994

An EXOSAT detection of the transient X-ray pulsar GRO J1008-57

The hard X-ray transient, GRO J1008-57, was discovered during a bright outburst in 1993 July by the Burst and Transient Source Experiment (BATSE) instrument on board the Compton Gamme-Ray Observatory (CGRO). There are no published reports of previous emission from this 93.6 sec X-ray pulsar. Recent optical results have suggested a Be star as the companion. A search of the EXOSAT archives shows that an ME observation centered on the star HD 88661 includes GRO J1008-57 within the field of view. The characteristics of the medium-energy detection including a hard spectrum and pulsed emission at 91.36 sec (with chance probability of 3 x 10(exp -4)) indicates that EXOSAT detected GRO J1008-57 rather than the field star. The estimated flux is 2.4 x 10(exp -11) ergs/cm sq/sec for a luminosity of 1.1 x 10(exp 34) (D/2 kpc)(exp 2) ergs/sec. The X-ray spectrum is hard (photon index approximately equals 1.2) and highly absorbed (N(sub H) approximately equals 0.7 x 10(exp 22)). The detection of this transient suggests that there is a pulse shape dependence on luminosity, a spectral shape independent of luminosity, a large period derivative of P-dot/P = 2.3 x 10(exp -3)/yr, and a dynamic range of at least 100 in L(sub chi). We discuss GRO J1008-57 data in the context of wind-accretion models for this new member of the Be class of X-ray binaries.

Macomb, D. J.↗
NASA NTRS1995

The spectrum and pulses of 1E 2259+586 from ASCA and BBXRT observations

The 7 s X-ray pulsator 1E 2259+586 was observed for approximately 1 day in 1993 with the Advanced Satellite for Cosmology and Astrophysics (ASCA). Observations were also obtained with Broad Band X-ray Telescope (BBXRT) in 1990 a few months after Ginga had observed 1E 2259+586 to be brighter than normal and the BBXRT data show 1E 2259+586 to be at an intermediate brightness level. By contrast, the ASCA data appear to have been obtained during a more common lower luminosity state. The pulse profiles we obtain are consistent with a connection between flux and pulse shape reported from Ginga data, and the pulsator continues to spin down. We use our high spectral resolution data to search for cyclotron lines in the spectrum that were claimed from observations made with other satellites. We find that the ASCA spectra of 1E 2259+586 cannot be satisfactorily fitted with either a single power law or a combination of two power laws, and that significant residuals occur around 1.5 and 5 keV. However, a combination of a power law and blackbody gives a good fit over the entire ASCA energy band with no evidence of spectral features. We have reanalyzed a Ginga LAC spectrum and find that this is also significantly better fitted by this two-component spectrum than a single power law. A possible explanation for such a two-component spectrum is that the blackbody emission comes from a neutron star and that the power-law component comes, at least in part, from a surrounding nebula. As there has, so far, no direct evidence that 1E 2259+586 is a binary system we consider whether there are other plausible mechanisms that might power the observed X-ray emission.

Corbet, R. H. D.↗
NASA NTRS1995

The unusual helium variable AM Canum Venaticorum

The unusual variable star AM CVn has puzzled astronomers for over 40 years. This object, both a photometric and spectroscopic variable, is believed to contain a pair of hydrogen-deficient white dwarfs of extreme mass ratio, transferring material via an accretion disk. We examine the photometric properties of AM CVn, analyzing 289 hours of high-speed photometric data spanning 1976 to 1992. The power spectrum displays significant peaks at 988.7, 1248.8, 1902.5, 2853.8, 3805.2, 4756.5, and 5707.8 microHz (1011.4, 800.8, 525.6, 350.4, 262.8, 210.2, and 175.2 s). We find no detectable power at 951.3 microHz (1051 s), the previously reported main frequency. The 1902.5, 2853.9, and 3805.2 microHz peaks are multiplets, with frequency splitting in each case of 20.77 +/- 0.05 microHz. The 1902.5 microHz seasonal pulse shapes are identical, within measurement noise, and maintain the same amplitude and phase as a function of color. We have determined the dominant frequency to be 1902.50902 +/- 0.00001 microHz with dot P = +1.71 (+/- 0.04) x 10(exp -11) s/s. We discuss the implications of these findings on a model for AM CVn.

Provencal, J. L.↗
NASA NTRS1997

RXTE Observation of Cygnus X-1: Spectra and Timing

We present first results from the analysis of an RXTE observation of Cyg X-1 in its low state, taken about two months after the end of the high state. With Gamma approx. equal to 1.45 the spectrum is considerably harder than previous low-state measurements. The observed spectrum can be explained by a Comptonization spectrum as that emitted from a spherical corona surrounded by a cold accretion disk. The optical depth of the corona is between 2 and 2.5 and the temperature is between 60 and 80 keV. Temporal analysis shows a typical Root Mean Square (RMS) noise of approximately 25%. The Pulse Shape Discrimination (PSD) can be described as consisting of a flat component followed by an 1/f power-law, followed by an f(sup -1.6) power-law. The lag of the hard photons with respect to the soft photons is consistent with prior observations. The coherence function is remarkably close to unity from 0.01 Hz to 10 Hz.

Wilms, J.↗
NASA NTRS1998

Optical Channelizer Evaluation Using Empirical Data and Simulation

Westinghouse Electric Corporation Division under NASA contract NAS3-25865 developed a proof-of-concept (POC) multichannel demultiplexer implemented as an acousto-optic radiofrequency (RF) with a spectrum analyzer. A detailed analysis of the experimental results indicate that the expected degradation caused by the acousto-optical channelizer is approximately 2.0 dB degradation at 10(exp -5) bit-error rate (BER) and 3.0 dB degradation at 10(exp -8) BER. This degradation may be quite acceptable when considering the excellent volume, mass, and power characteristics of acousto-optical channelizing relative to other technologies. In addition, system performance can be greatly improved by using digital pulse shaping in the modem and increasing the channel spacing from 40 to 45 kHz for 64 kbps quadrature phase-shift keying (QPSK) modulation.

Ivancic,William D.↗
NASA NTRS1997

The Implications of Encoder/Modulator/ Phased Array Designs for Future Broadband LEO Communications

In this paper we summarize the effects of modulation and channel coding on the design of wide angle scan, broadband, phased army antennas. In the paper we perform several trade studies. First, we investigate the amplifier back-off requirement as a function of variability of modulation envelope. Specifically, we contrast constant and non-constant envelope modulations, as well as single and multiple carrier schemes. Additionally, we address the issues an(f concerns of using pulse shaping filters with the above modulation types. Second, we quantify the effects of beam steering on the quality of data, recovery using selected modulation techniques. In particular, we show that the frequency response of the array introduces intersymbol interference for broadband signals and that the mode of operation for the beam steering controller may introduce additional burst or random errors. Finally, we show that the encoder/modulator design must be performed in conjunction with the phased array antenna design.

Vanderaar, Mark↗