Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pyrolysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

A study of the effects on mice of smoke and gases from controlled fires in simulated aircraft cabins

Male Swiss albino mice were exposed to the pyrolysis products of two fire-retardant materials, a chlorinated aromatic polyamide and a copolymer of vinylidine fluoride and hexafluoropropene. Comparison tests were made with cotton and a 50/50 cotton-polyester composite. In addition, tests were conducted under the presence of CO, and mice were injected intraperitoneally or intramuscularly with aqueous solutions containing dissolved effluents from the pyrolysis of cotton or of chlorinated aromatic polyamide. Results indicate that unique thermodecomposition products of the polymeric materials are more toxic to mice than are other products from cotton under similar controlled conditions.

Moreci, A. P.↗
NASA NTRS1976

JPL Activated Carbon Treatment System (ACTS) for sewage

An Activated Carbon Treatment System (ACTS) was developed for sewage treatment and is being applied to a one-million gallon per day sewage treatment pilot plant in Orange County California. Activities reported include pyrolysis and activation of carbon-sewage sludge, and activated carbon treatment of sewage to meet ocean discharge standards. The ACTS Sewage treatment operations include carbon-sewage treatment, primary and secondary clarifiers, gravity (multi-media) filter, filter press dewatering, flash drying of carbon-sewage filter cake, and sludge pyrolysis and activation. Tests were conducted on a laboratory scale, 10,000 gallon per day demonstration plant and pilot test equipment. Preliminary economic studies are favorable to the ACTS process relative to activated sludge treatment for a 175,000,000 gallon per day sewage treatment plant.

Source record↗
NASA NTRS1976

Study of thermal stability and degradation of fire resistant candidate polymers for aircraft interiors

The thermochemistry of bismaleimide resins and phenolphthalein polycarbonate was studied. Both materials are fire-resistant polymers and may be suitable for aircraft interiors. The chemical composition of the polymers has been determined by nuclear magnetic resonance and infrared spectroscopy and by elemental analysis. Thermal properties of these polymers have been characterized by thermogravimetric analyses. Qualitative evaluation of the volatile products formed in pyrolysis under oxidative and non-oxidative conditions has been made using infrared spectrometry. The residues after pyrolysis were analyzed by elemental analysis. The thermal stability of composite panel and thermoplastic materials for aircraft interiors was studied by thermogravimetric analyses.

Hsu, M. T. S.↗
NASA NTRS1975

Experimental observation of the absorption spectrum of Fe I in the region 1600-900 A

Laboratory observations of the absorption spectrum of Fe I in the vacuum UV region between 900 and 1600 A are reported. The spectrum was obtained by applying the flash pyrolysis technique to iron foils of 1-micron thickness; the continuum was provided by a Garton source used in series with a spark gap. Plots which show several strong autoionized lines superimposed on a smooth continuum are presented along with a table of narrow lines between 904.900 and 1380.208 A. It is noted that the present spectrum is in agreement with others that have been obtained with the flash pyrolysis technique.

Tondello, G.↗
NASA NTRS1976

The sensitivity of relative toxicity rankings by the USF/NASA test method to some test variables

Pyrolysis temperature and the distance between the source and sensor of effluents are two important variables in tests for relative toxicity. Modifications of the USF/NASA toxicity screening test method to increase the upper temperature limit of pyrolysis, reduce the distance between the sample and the test animals, and increase the chamber volume available for animal occupancy, did not significantly alter rankings of relative toxicity of four representative materials. The changes rendered some differences no longer significant, but did not reverse any rankings. The materials studied were cotton, wool, aromatic polyamide, and polybenzimidazole.

Hilado, C. J.↗
NASA NTRS1976

The polymer-like organic material in the Orgueil meteorite

Results are reported for analysis of polymeric organic material contained in powder from the Orgueil chondrite, using a stepwise high-vacuum pyrolysis-gas chromatography-mass spectrometry technique. Pyrolysis products obtained include a series of alkanes and alkenes to C8, an extensive series of alkylbenzene isomers, thiophene, alkylthiophenes, benzothiophene, acetonitrile, acrylonitrile, benzonitrile, acetone, and phenol. Most of these products are shown to be similar both qualitatively and quantitatively to those previously obtained from solvent-extracted Allende powder, indicating a basically aromatic and heteroaromatic polymer matrix with short aliphatic bridges or side chains. The production of acrylonitrile, acetonitrile, and benzonitrile (common breakdown products of amino acids) from the insoluble organic material is taken to suggest that amino acids exist in an insoluble form, perhaps as peptides, in the meteorite's polymeric component. Similarities between the structure of the Orgueil polymeric material and terrestrial kerogen are discussed which raise the possibility that both might have been produced in part by similar reactions.

Bandurski, E. L.↗
NASA NTRS1976

Clean fuels from biomass

The paper discusses the U.S. resources to provide fuels from agricultural products, the present status of conversion technology of clean fuels from biomass, and a system study directed to determine the energy budget, and environmental and socioeconomic impacts. Conversion processes are discussed relative to pyrolysis and anaerobic fermentation. Pyrolysis breaks the cellulose molecules to smaller molecules under high temperature in the absence of oxygen, wheras anaerobic fermentation is used to convert biomass to methane by means of bacteria. Cost optimization and energy utilization are also discussed.

Hsu, Y.-Y.↗
NASA NTRS1977

The use of a behavioral response system in the USF/NASA toxicity screening test method

Relative toxicity data on the pyrolysis effluents from bisphenol A polycarbonate and wool fabric were obtained, based on visual observations of the behavior of free-moving mice and on an avoidance response behavioral paradigm of restrained rats monitored by an instrumented behavioral system. The initial experiments show an essentially 1:1 correlation between the two systems with regard to first signs of incapacitation, collapse, and death from pyrolysis effluents from polycarbonate. It is hypothesized that similarly good correlations between these two systems might exist for other materials exhibiting predominantly carbon monoxide mechanisms of intoxication. This hypothesis needs to be confirmed, however, by additional experiments. Data with wool fabric exhibited greater variability with both procedures, indicating possibly different mechanisms of intoxication for wool as compared with bisphenol A polycarbonate.

Hilado, C. J.↗
NASA NTRS1977

Variation in animal response to different toxicants

The variation in response of different lots of male Swiss albino mice to pyrolysis effluents from surgical cotton and from bisphenol A polycarbonate, and to pure carbon monoxide, is discussed. The variation appeared to be less with the pyrolysis gases from polycarbonate than with pure carbon monoxide.

Hilado, C. J.↗
NASA NTRS1978

Fire detector response in aircraft applications

Photoelectric, ionization, and gas sensors were used to detect the signatures from the radiant heat or flame of various aircraft materials. It was found that both ionization and photoelectric detectors are about equally capable of detecting products of pyrolysis and combustion of synthetic polymers, especially those containing fire-retardant additives. Ionization detectors alone appeared to be sensitive to combustion products of simple cellulosic materials. A gas sensor detector appeared to be insensitive to pyrolysis or combustion products of many of the materials.

Wiersma, S. J.↗
NASA NTRS1980

Analyses of moisture in polymers and composites

A suitable method for the direct measurement of moisture concentrations after humidity/thermal exposure on state of the art epoxy and polyimide resins and their graphite and glass fiber reinforcements was investigated. Methods for the determination of moisture concentration profiles, moisture diffusion modeling and moisture induced chemical changes were examined. Carefully fabricated, precharacterized epoxy and polyimide neat resins and their AS graphite and S glass reinforced composites were exposed to humid conditions using heavy water (D20), at ambient and elevated temperatures. These specimens were fixtured to theoretically limit the D20 permeation to a unidirectional penetration axis. The analytical techniques evaluated were: (1) laser pyrolysis gas chromatography mass spectrometry; (2) solids probe mass spectrometry; (3) laser pyrolysis conventional infrared spectroscopy; and (4) infrared imaging thermovision. The most reproducible and sensitive technique was solids probe mass spectrometry. The fabricated exposed specimens were analyzed for D20 profiling after humidity/thermal conditioning at three exposure time durations.

Ryan, L. E.↗
NASA NTRS1980

Literature survey of properties of synfuels derived from coal

A literature survey of the properties of synfuels for ground-based gas turbine applications is presented. Four major concepts for converting coal into liquid fuels are described: solvent extraction, catalytic liquefaction, pyrolysis, and indirect liquefaction. Data on full range syncrudes, various distillate cuts, and upgraded products are presented for fuels derived from various processes, including H-coal, synthoil, solvent-refined coal, donor solvent, zinc chloride hydrocracking, co-steam, and flash pyrolysis. Some typical ranges of data for coal-derived low Btu gases are also presented.

Reynolds, T. W.↗
NASA NTRS1981

Characterization of cured polystyrylpyridine by model compounds

The crosslinking or curing reaction of polystyrylpyridine (PSP) has been studied by means of thermal reactions of its model compounds. Compounds 2,6-distyrylpyridine, 4-stilbazole, and deuterated 4-stilbazole were pyrolyzed at 200-325 C both in air and under vacuum in a sealed tube. The major pyrolysis products were diarylethane and stilbene, and were characterized by gas chromatography-mass spectrometry. Major dimeric products were naphthalene or quinoline derivatives. Mechanisms for the pyrolysis are suggested, and a crosslinked structure for cured PSP is proposed based on the thermal reaction products of model compounds.

Hsu, M.-T. S.↗
NASA NTRS1982

Literature survey of properties of synfuels derived from coal

A literature survey of the properties of synfuels for ground-based turbine applications is presented. The four major concepts for converting coal into liquid fuels (solvent extraction, catalytic liquefaction, pyrolysis, and indirect liquefaction), and the most important concepts for coal gasification (fixed bed, fluidized bed, entrained flow, and underground gasification) are described. Upgrading processes for coal derived liquid fuels are also described. Data presented for liquid fuels derived from various processes, including H-coal, synthoil, solvent refined coal, COED, donor solvent, zinc chloride hydrocracking, co-steam, and flash pyrolysis. Typical composition, and property data is also presented for low and medium-BTU gases derived from the various coal gasification processes.

Flores, F.↗
NASA NTRS1983

Shock tube study of the fuel structure effects on the chemical kinetic mechanisms responsible for soot formation

Soot formation in toluene-, benzene-, and acetylene-oxygen-argon mixtures was investigated to study soot formation in a combustion environment. High concentrations of oxygen completely suppress soot formation. The addition of oxygen at relatively low concentrations uniformly suppresses soot formation at high pressures, while at relatively lower pressures it suppresses soot formation at higher temperatures while promoting soot production at lower temperatures. The observed behavior indicates that oxidation reactions compete with ring fragmentation. The main conclusion to be drawn from the results is that the soot formation mechanism is probably the same for the pyrolysis and oxidation of hydrocarbons. That is, the addition of oxygen does not alter the soot route but rather promotes or inhibits this route by means of competitive reactions. An approach to empirical modeling of soot formation during pyrolysis of aromatic hydrocarbons is also presented.

Frenklach, M.↗
NASA NTRS1985

Shock tube study of the fuel structure effects on the chemical kinetic mechanisms responsible for soot formation, part 2

Soot formation in oxidation of allene, 1,3-butadiene, vinylacetylene and chlorobenzene and in pyrolysis of ethylene, vinylacetylene, 1-butene, chlorobenzene, acetylen-hydrogen, benzene-acetylene, benzene-butadiene and chlorobenzene-acetylene argon-diluted mixtures was studied behind reflected shock waves. The results are rationalized within the framework of the conceptual models. It is shown that vinylacetylene is much less sooty than allene, which indicates that conjugation by itself is not a sufficient factor for determining the sooting tendency of a molecule. Structural reactivity in the context of the chemical kinetics is the dominant factor in soot formation. Detailed chemical kinetic modeling of soot formation in pyrolysis of acetylene is reported. The main mass growth was found to proceed through a single dominant route composed of conventional radical reactions. The practically irreversible formation reactions of the fused polycyclic aromatics and the overshoot by hydrogen atom over its equilibrium concentration are the g-driving kinetic forces for soot formation.

Frenklach, M.↗
NASA NTRS1984

Silicon production in an aerosol reactor

An aerosol reactor for the growth of large silicon particles by silane pyrolysis was shown to demonstrate the following properties: (1) generate seed particles by pyrolysis of a small amount of silane; (2) mix seed aerosol with primary silane flow, limiting number concentration such that the amount of silane is sufficient to grow the desired size of particles from the seed; and (3) react the silane at a rate which is controlled such that the seed particles scavenge the condensible vapors rapidly enough to inhibit further nucleation.

Wu, J. J.↗
NASA NTRS1985

Development of a carbon formation reactor for carbon dioxide reduction

Applied research, engineering development, and performance evaluation were conducted on a process for formation of dense carbon by pyrolysis of methane. Experimental research showed that dense (0.7 to 1.6 g/cc bulk density and 1.6 to 2.2 g/cc solid density) carbon can be produced by methane pyrolysis in quartzwool-packed quartz tubes at temperatrues of 1100 to 1300 C. This result supports the condensation theory of pyrolytic carbon formation from gaseous hydrocarbons. A full-scale Breadboard Carbon Formation Reactor (CFR) was designed, fabricated, and tested at 1100 to 1200 C with 380 to 2280 sccm input flows of methane. Single-pass conversion of methane to carbon ranged from 60 to 100 percent, with 89 percent average conversion. Performance was projected for an Advanced Carbon Reactor Subsystem (ACRS) which indicated that the ACRS is a viable option for management of metabolic carbon on long-duration space missions.

Noyes, G.↗