SEARCH · Search NASA

Results for “RAMAN SCATTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Confocal Raman Microscopy as a Probe of Material Deconstruction in Processed Low-Density Polyethylene Particles

Confocal Raman microscopy was applied to detect structural change within individual particles of low-density polyethylene (LDPE) following chemical and electrochemical processing steps that aimed to facilitate material decomposition. A high numerical aperture (NA) oil-immersion objective enabled depth-profiling through the near surface region (20 μm–40 μm) of irregularly shaped particles with an axial spatial resolution < 2 μm estimated from measurements of instrument detection efficiency profiles. Changes in vibrational bands sensitive to polyethylene crystallinity were evident following treatments and linked to the release of low molecular weight compounds present as additives and products of processing. Effects of processing were probed by monitoring the rise of Raman scattering intensity in vibrational modes associated with polyethylene chains in a zig-zag (trans) conformation near 1128 cm –1 , 1294 cm –1 , and 1418 cm –1 , signaling chain clustering and development of organized, crystalline-like assemblies. Pristine LDPE particles displayed a uniform structure across the near surface region, while particles treated initially with chemical extractant and then further processed displayed increasingly enhanced crystallinity up to the maximum depth probed (40 μm). As a step toward measurements on ensembles of particles, least squares modeling was adapted to derive pure component spectra reflecting crystallinity change within spectral datasets. The work demonstrates high spatial resolution Raman depth-profiling for the characterization of processed polymers using a high NA immersion objective to overcome the limitations of air-objectives often used for confocal Raman microscopy.

Wahiduzzaman, Md. [Department of Chemistry and Bio↗

NASA NTRSDate not supplied

SHERLOC Investigations at the Máaz and Séítah formations within Jezero crater

Introduction: The Scanning Habitable Environments with Raman and Luminescence for Organics and Chemicals (SHERLOC) instrument combines microscopic imaging, native fluorescence and Raman spectroscopy to better understand the mineral and chemical makeup of rocks on the martian surface. Native fluorescence emissions from aromatic organic species allow for detection and classification of aromatic organic molecules, whereas Raman scattered photons from molecules allow identification of functional groups of organics, chemicals, and minerals. These signatures are obtained on a 100 micron spatial scale and collocated to images so textures, minerals and chemicals can all be compared [1]. Results: SHERLOC has been operating on Mars since February 18, 2021. As of this writing, we have analyzed 3 natural surfaces, and 5 abraded rock patches created during the Crater Floor Campaign within Jezero crater [2]. The Guillaumes target (from the Roubion outcrop, Roubion member of the Máaz Formation) is dominated by Ca-sulfate with patches of perchlorate. The Bellegarde target (from the Rochette outcrop, Rochette member of the Máaz Formation) exhibits Raman peaks that match hydrated Ca-sulfate, amorphous/microcrystalline silicate (AMS), carbonate, and phosphate phases. A fluorescence doublet at ~305 and ~325 nm was detected and is most likely due to indigenous organic material in the sample. The Garde target (from the Bastide outcrop, Bastide member of the Séítah Formation) is dominated by olivine and carbonate with AMS occurring across the material. The Dourbes target (from the Brac outcrop, Bastide member of the Séítah Formation) is dominated by olivine and shows minor amounts of carbonate, hydrated Ca-sulfate, and AMS. The Quartier target exhibits a large sulfate feature, as well as carbonate, perchlorate, olivine and a fluorescence doublet at 305 and 325 nm and is very similar to that observed at Bellegarde. In each of these samples we have identified fluorescence features that are likely aromatic organics native to the rock interiors. Acknowledgments: This work was carried out at the Jet Propulsion Laboratory, The California Institute of Technology under a contract from NASA.

L W Beegle↗

NASA NTRS1981

Density measurement in air with a saturable absorbing seed gas

Resonantly enhanced scattering from the iodine molecule is studied experimentally for the purpose of developing a scheme for the measurement of density in a gas dynamic flow. A study of the spectrum of iodine, the collection of saturation data in iodine, and the development of a mathematical model for correlating saturation effects were pursued for a mixture of 0.3 torr iodine in nitrogen and for mixture pressures up to one atmosphere. For the desired pressure range, saturation effects in iodine were found to be too small to be useful in allowing density measurements to be made. The effects of quenching can be reduced by detuning the exciting laser wavelength from the absorption line center of the iodine line used (resonant Raman scattering). The signal was found to be nearly independent of pressure, for pressures up to one atmosphere, when the excitation beam was detuned 6 GHz from line center for an isolated line in iodine. The signal amplitude was found to be nearly equal to the amplitude for fluorescence at atmospheric pressure, which indicates a density measurement scheme is possible.

Baganoff, D.↗

NASA NTRS2008

Low-Resolution Raman-Spectroscopy Combustion Thermometry

A method of optical thermometry, now undergoing development, involves low-resolution measurement of the spectrum of spontaneous Raman scattering (SRS) from N2 and O2 molecules. The method is especially suitable for measuring temperatures in high pressure combustion environments that contain N2, O2, or N2/O2 mixtures (including air). Methods based on SRS (in which scattered light is shifted in wavelength by amounts that depend on vibrational and rotational energy levels of laser-illuminated molecules) have been popular means of probing flames because they are almost the only methods that provide spatially and temporally resolved concentrations and temperatures of multiple molecular species in turbulent combustion. The present SRS-based method differs from prior SRS-based methods that have various drawbacks, a description of which would exceed the scope of this article. Two main differences between this and prior SRS-based methods are that it involves analysis in the frequency (equivalently, wavelength) domain, in contradistinction to analysis in the intensity domain in prior methods; and it involves low-resolution measurement of what amounts to predominantly the rotational Raman spectra of N2 and O2, in contradistinction to higher-resolution measurement of the vibrational Raman spectrum of N2 only in prior methods.

Nguyen, Quang-Viet↗

NASA NTRS2021

Velocity, Temperature and Density Measurements in Supersonic Jets

Prediction of the flow field properties in supersonic jets using computational fluid dynamics (CFD) codes is challenging when there is a significant temperature difference between the jet core and the ambient air and/or compressibility effects are substantial. A benchmark set of flow field property data were obtained to assess current CFD capabilities and develop better modeling approaches for these turbulent flow fields where accurate calculation of turbulent heat flux is important. Three different convergent-divergent nozzles were investigated with exit Mach numbers of: 1.36, 1.63 and 2.0 at their perfectly expanded conditions. The conditions of the jet were set to obtain a temperature difference of zero between the jet core and the ambient air, and then the temperature difference was progressively increased, at the same jet Mach number. Particle Image Velocimetry (PIV), spontaneous rotational Raman scattering spectroscopy (SRS), Background Oriented Schlieren (BOS) and probe-based measurements were used to acquire high quality, spatially-resolved measurements of the mean and root mean square (rms) velocities as well as the mean and rms gas temperatures and densities in both hot and cold supersonic jet flows. The non-intrusive flow measurements are compared both against probe measurements and against standard Reynolds averaged Navier-Stokes (RANS) predictions of the supersonic jet flow properties.

Raman Spectroscopy↗

NASA NTRS2020

Velocity, Temperature and Density Measurements in Supersonic Jets

Rotational Raman Spectroscopy↗

DOE OSTI2024

Formation of Linear Plasmonic Heterotrimers Using Nanoparticle Docking to DNA Origami Cages

The fabrication of complex assemblies with interesting collective properties from plasmonic nanoparticles (NPs) is often challenging. While DNA-directed self-assembly has emerged as one of the most promising approaches to forming such complex assemblies, the resulting structures tend to have large variability in gap sizes and shapes, as the DNA strands used to organize these particles are flexible, and the polydispersity of the NPs leads to variability in these critical structural features. Here, we use a new strategy termed docking to DNA origami cages (D-DOC) to organize spherical NPs into a linear heterotrimer with a precisely defined geometrical arrangement. Instead of binding NPs to the exterior of the DNA templates, D-DOC binds the NPs to either the interior or the opening of a 3D cage, which significantly reduces the variability of critical structural features by incorporating multiple diametrically arranged capture strands to tether NPs. Additionally, such a spatial arrangement of the capture strand can work synergistically with shape complementarity to achieve tighter confinement. To assemble NPs via D-DOC, we developed a multistep assembly process that first encapsulates an NP inside a cage and then binds two other NPs to the openings. Microscopic characterization shows low variability in the bond angles and gap sizes. Both UV–vis absorption and surface-enhanced Raman scattering (SERS) measurements showed strong plasmonic coupling that aligned with predictions by electrodynamic simulations, further confirming the precision of the assembly. These results suggest D-DOC could open new opportunities in biomolecular sensing, SERS and fluorescence spectroscopies, and energy harvesting through the self-assembly of NPs into more complex 3D assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2011

Frame-Transfer Gating Raman Spectroscopy for Time-Resolved Multiscalar Combustion Diagnostics

Accurate experimental measurement of spatially and temporally resolved variations in chemical composition (species concentrations) and temperature in turbulent flames is vital for characterizing the complex phenomena occurring in most practical combustion systems. These diagnostic measurements are called multiscalar because they are capable of acquiring multiple scalar quantities simultaneously. Multiscalar diagnostics also play a critical role in the area of computational code validation. In order to improve the design of combustion devices, computational codes for modeling turbulent combustion are often used to speed up and optimize the development process. The experimental validation of these codes is a critical step in accepting their predictions for engine performance in the absence of cost-prohibitive testing. One of the most critical aspects of setting up a time-resolved stimulated Raman scattering (SRS) diagnostic system is the temporal optical gating scheme. A short optical gate is necessary in order for weak SRS signals to be detected with a good signal- to-noise ratio (SNR) in the presence of strong background optical emissions. This time-synchronized optical gating is a classical problem even to other spectroscopic techniques such as laser-induced fluorescence (LIF) or laser-induced breakdown spectroscopy (LIBS). Traditionally, experimenters have had basically two options for gating: (1) an electronic means of gating using an image intensifier before the charge-coupled-device (CCD), or (2) a mechanical optical shutter (a rotary chopper/mechanical shutter combination). A new diagnostic technology has been developed at the NASA Glenn Research Center that utilizes a frame-transfer CCD sensor, in conjunction with a pulsed laser and multiplex optical fiber collection, to realize time-resolved Raman spectroscopy of turbulent flames that is free from optical background noise (interference). The technology permits not only shorter temporal optical gating (down to <1 s, in principle), but also higher optical throughput, thus resulting in a substantial increase in measurement SNR.

Nguyen, Quang-Viet↗

DOE OSTI2025

Laser Measurements and Modeling of Shock Tunnel Freestream Velocity and Multispecies Thermal Nonequilibrium

Coherent anti-Stokes Raman scattering (CARS) and nitric oxide molecular tagging velocimetry (NO-MTV) were used to characterize the freestream in Sandia’s Hypersonic Shock Tunnel (HST) using a burst-mode laser operated at 100 kHz. Experiments were performed at nominal freestream velocities of 3 and 4 km/s using both air and N 2 test gas. The CARS diagnostic provides nonequilibrium characterization of the flow by measuring vibrational and rotational temperatures of N 2 and O 2 , which are compared to NO temperatures from separate laser absorption experiments. Simultaneous, collinear freestream velocities were measured using NO MTV along with pitot pressure measurements. Furthermore, this extensive freestream dataset is compared to nonequilibrium CFD that is capable of modeling species-specific, vibrational temperatures throughout the nozzle expansion. Significant nonequilibrium between vibrational and rotational temperatures was measured at each flow condition. N 2 exhibits the most nonequilibrium, followed by O 2 and NO. The CFD model captures this trend, although it consistently overpredicts N 2 and O 2 vibrational temperatures. At 3 km/s, the modeled NO nonequilibrium is underpredicted, whereas it is overpredicted at 4 km/s. Good agreement is seen between CFD and the velocity and rotational temperature measurements. Experiments with water added to the test gas yielded no discernable difference in vibrational relaxation.

Aerodynamics↗

DOE OSTI2025

Excitation Laser Energy Dependence of the Gap-Mode TERS Spectra of WS 2 and MoS 2 on Silver

In this work we present a systematic study of the dependence of the gap mode tip-enhanced Raman scattering (TERS) response of the mono- and bi-layer WS 2 and MoS 2 on silver as a function of the excitation laser energy in a broad spectral range from 473nm to 830 nm. For this purpose, we collected consecutive TERS maps of the same area in the sample containing mono-and bi-layer regions with the same TERS probe with 6 different excitation lasers. To decrease the number of collected TERS maps, we used for the first time to the best of our knowledge, concurrent excitation and collection with two lasers simultaneously. We found that the E 2g /A 1g peak intensity ratio for the bilayer WS 2 @Ag and the ratio of the A’/A 1g peak intensity of the out-of-plane mode for the mono- and the bilayer, change in a significantly non-monotonous way as the excitation laser energy is swept from 1.58 eV to 2.62 eV. The former ratio increases at energies corresponding to A and B excitons (~2.0 eV and 2.4 eV correspondingly) in bilayer WS 2 . The absolute intensity of the A’ peak in the monolayer, and correspondingly the A’/A 1g ratio, is surprisingly high at lower excitation energies, but dips dramatically at the energy corresponding to the A exciton, being restored partially in between A and B excitons, but still showing the descending trend as the excitation laser energy increases. A somewhat similar picture was observed in mono- and bi-layers of MoS 2 @Ag, though the existing set of excitation lasers did not match the excitonic profile of this material as nicely as for the case of WS 2 . We attribute the observed behavior to the presence of intermediate (Fano resonance) or strong (Rabi splitting) coupling between the excitons in transition metal dichalcogenides (TMDs) and the plasmons in the tip-substrate nanocavity. This is akin to the so-called Fano (Rabi) transparency experimentally observed in far field scattering from transition metal dichalcogenides between two plasmonic metals. The possibility of the formation of intermediate/strong coupling between the excitonic resonances in TMDs and the nanocavity re-evaluates the role of various resonances in the gap-mode TERS and should become an important factor to be considered by TERS practitioners during planning the experiments. Lastly, based on observed phenomena and its explanation, we propose the “ideal” substrate for efficient TERS and tip enhanced photoluminescence (TEPL) measurements.

Raman spectroscopy↗

NASA NTRS2013

NASA Tech Briefs, January 2013

Topics include: Single-Photon-Sensitive HgCdTe Avalanche Photodiode Detector; Surface-Enhanced Raman Scattering Using Silica Whispering-Gallery Mode Resonators; 3D Hail Size Distribution Interpolation/Extrapolation Algorithm; Color-Changing Sensors for Detecting the Presence of Hypergolic Fuels; Artificial Intelligence Software for Assessing Postural Stability; Transformers: Shape-Changing Space Systems Built with Robotic Textiles; Fibrillar Adhesive for Climbing Robots; Using Pre-Melted Phase Change Material to Keep Payloads in Space Warm for Hours without Power; Development of a Centrifugal Technique for the Microbial Bioburden Analysis of Freon (CFC-11); Microwave Sinterator Freeform Additive Construction System (MS-FACS); DSP/FPGA Design for a High-Speed Programmable S-Band Space Transceiver; On-Chip Power-Combining for High-Power Schottky Diode-Based Frequency Multipliers; FPGA Vision Data Architecture; Memory Circuit Fault Simulator; Ultra-Compact Transputer-Based Controller for High-Level, Multi-Axis Coordination; Regolith Advanced Surface Systems Operations Robot Excavator; Magnetically Actuated Seal; Hybrid Electrostatic/Flextensional Mirror for Lightweight, Large-Aperture, and Cryogenic Space Telescopes; System for Contributing and Discovering Derived Mission and Science Data; Remote Viewer for Maritime Robotics Software; Stackfile Database; Reachability Maps for In Situ Operations; JPL Space Telecommunications Radio System Operating Environment; RFI-SIM: RFI Simulation Package; ION Configuration Editor; Dtest Testing Software; IMPaCT - Integration of Missions, Programs, and Core Technologies; Integrated Systems Health Management (ISHM) Toolkit; Wind-Driven Wireless Networked System of Mobile Sensors for Mars Exploration; In Situ Solid Particle Generator; Analysis of the Effects of Streamwise Lift Distribution on Sonic Boom Signature; Rad-Tolerant, Thermally Stable, High-Speed Fiber-Optic Network for Harsh Environments; Towed Subsurface Optical Communications Buoy; High-Collection-Efficiency Fluorescence Detection Cell; Ultra-Compact, Superconducting Spectrometer-on-a-Chip at Submillimeter Wavelengths; UV Resonant Raman Spectrometer with Multi-Line Laser Excitation; Medicine Delivery Device with Integrated Sterilization and Detection; Ionospheric Simulation System for Satellite Observations and Global Assimilative Model Experiments - ISOGAME; Airborne Tomographic Swath Ice Sounding Processing System; flexplan: Mission Planning System for the Lunar Reconnaissance Orbiter; Estimating Torque Imparted on Spacecraft Using Telemetry; PowderSim: Lagrangian Discrete and Mesh-Free Continuum Simulation Code for Cohesive Soils; Multiple-Frame Detection of Subpixel Targets in Thermal Image Sequences; Metric Learning to Enhance Hyperspectral Image Segmentation; Basic Operational Robotics Instructional System; Sheet Membrane Spacesuit Water Membrane Evaporator; Advanced Materials and Manufacturing for Low-Cost, High-Performance Liquid Rocket Combustion Chambers; Motor Qualification for Long-Duration Mars Missions.

Source record↗

DOE OSTI2025

Multiscale structural analysis of polymorphic phase boundaries in doped antiferroelectric sodium niobate

In the current work, we have performed multiscale structural analysis of a Pb-free sodium niobate-based smart system, i.e., 0.9⁢NaNbO 3 –0.1⁢Ba 0.9 ⁢Ca 0.1 ⁢TiO 3 (NN-10BCT) reported earlier for its high ferroelectric response. We have investigated the temperature-dependent evolution of crystal structure at long, medium, and short ranges using synchrotron x-ray diffraction (SXRD), Raman scattering, and pair distribution function(PDF) techniques in conjunction with dielectric studies. Temperature-dependent synchrotron x-ray diffraction data combined with dielectric analysis suggest two unique polymorphic phase boundaries (PPB) with two coexisting ferroelectric phases stable in the wide temperature ranges. These PPBs are stable in different regions viz. (i) cryogenic temperatures with coexisting R3c and Pmc⁢2 1 phases (ii) vicinity of room temperatures with coexisting Pmc⁢2 1 and Amm2 phases. In contrast to the conclusions drawn from SXRD, PDF reveals structures having lower symmetry (with coexisting Cc+ Pmc2 1 phases at 1.7 ≤r≤ 20 Å) at short ranges for these PPBs. In conclusion, the presence of different long- and short-range symmetries (accommodating tilt-oriented ferroelectric phases) in the unique polymorphic phase boundaries makes them thermally stable and advantageous for technological applications.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Tuning the Magnetic Properties of CrI 3 Using Ni Thin Film Deposition for Applications in Spintronic Devices

Chromium triiodide (CrI 3 ), a van der Waals magnet, has recently been shown to host Ising ferromagnetism down to the monolayer limit. It is a potentially important material in 2D magnet-based applications, such as magnetic sensors and spintronic devices. Prior studies have revealed the coexistence of two different types of interlayer magnetic coupling, the antiferromagnetic (AFM) coupling near the surface and ferromagnetic (FM) coupling in the deep bulk layers, in pristine CrI 3 crystals below the Curie temperature. In this study, we used Ni thin film deposition to tune the surface magnetic states in bulk CrI 3 . A nanometer thickness (4 nm thick) of Ni was deposited on the surface of CrI 3 using electron-beam evaporation to form a Ni/CrI 3 heterostructure. The deposited Ni thin layer forms nanoclusters that completely cover the CrI 3 surface. Magnetic states of CrI 3 before and after Ni deposition are probed by ultralow-frequency magneto-Raman spectroscopy. Instead of seeing three spin wave branches in Raman scattering below 2 T, as in pristine bulk CrI 3 , in Ni/CrI 3 , we observe only a single spin wave branch, which is softened compared to that in pristine CrI 3 and displays a Zeeman shift under an out-of-plane magnetic field up to 7 T. This observation reveals that the AFM layers on pristine CrI 3 crystal surfaces transit into FM layers, so the entire CrI 3 crystal is in the FM state after Ni deposition. First-principles calculations show that Ni atoms tend to diffuse into the CrI 3 lattice, and the FM interlayer coupling has a much lower energy than AFM coupling in the presence of Ni atoms. As a result, our studies show that the magnetic state of CrI 3 can be modified through deposition of a thin metal layer on the surface, offering a route for controlling the spin degree of freedom in van der Waals magnets.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Abnormal Slow Phonon Dynamics Toward Prolonging Excited States Dynamics Enabled by Crystalline‐Assembling Donor–Acceptor Molecules

Phonon dynamics are a critical factor to control the optical properties of excited states in light-emitting materials. Here, we report an extremely slow relaxation of photoexcited lattice vibrations enabled by assembling the donor-acceptor (D–A) molecules [2-(9,9-dimethylacridin-10(9H)-yl)-9,9-dimethyl-9H-thioxanthene 10,10-dioxide], namely AC molecules, into dipolar crystal. By using photoexcitation-modulated Raman spectroscopy, we find that the crystalline-lattice vibrations monitored by Raman-scattering laser beam of 785 nm demonstrate an un-usual slow relaxation in the time scale of seconds after ceasing photoexcitation beam of 343 nm in such dipolar crystal. This presents extremely slow phonon dynamics enabled by crystalline-assembling the D–A molecules into a dipolar crystal. Simultaneously, the photoluminescence (PL) exhibits a prolonged behavior, lasting 10 ms after ceasing photoexcitation in dipolar AC crystal. This phenomenon provides an experimental hypothesis that the slow phonon dynamics function as an important mechanism to unusually prolong excited states dynamics upon crystalline-assembling the D–A molecules into dipolar crystal. Here, this hypothesis can be verified by directly suppressing the phonon dynamics through freezing D–A molecular liquid into dipolar crystalline solid at 77 K to largely prolong the PL to 1 s- after removing photoexcitation. Clearly, crystalline-assembling D–A molecules provide the necessary conditions to enable slow phonon dynamics toward prolonging excited states dynamics.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Nonresonant Raman Control of Ferroelectric Polarization

Important advances is recently made in the search for materials with complex multi-phase landscapes that host photoinduced metastable collective states with exotic functionalities. In almost all cases so far, the desired phases are accessed by exploiting light–matter interactions via the imaginary part of the dielectric function through above-bandgap or resonant mode excitation. Nonresonant Raman excitation of coherent modes is experimentally observed and proposed for dynamic material control, but the resulting atomic excursion is limited to perturbative levels. Here, in this study, this challenge is overcome by employing nonresonant ultrashort pulses with low photon energies well below the bandgap. Using mid-infrared pulses, ferroelectric reversal is induced in lithium niobate, and the large-amplitude mode displacements are characterized through femtosecond stimulated Raman scattering and second harmonic generation. This approach, validated by first-principle calculations, defines a novel method for synthesizing hidden phases with unique functional properties and manipulating complex energy landscapes at reduced energy consumption and ultrafast speeds.

Shi, Jiaojian [Stanford Univ., CA (United States);↗

DOE OSTI2026

Identification of Common Types of Plastics by Vibrational Spectroscopic Techniques

Polyethylene Terephthalate (PET), High-Density Polyethylene (HDPE), Polyvinyl Chloride (PVC), Low-Density Polyethylene (LDPE), Polypropylene (PP), and Polystyrene (PS) account for most plastic use worldwide, with production nearing 380 million tons annually. A considerable portion enters municipal solid waste and landfills, creating long-term environmental concerns. Scaling recycling operations requires automated sorting technologies, with spectroscopy and machine learning offering promising solutions. In this study, a six-class convolutional neural network (CNN) was developed for plastic identification using vibrational spectroscopies. Raman Scattering (RS) spectra collected from recycling samples enabled accurate chemical differentiation while assessing the influence of visible features such as color. A CNN trained on RS data achieved 100% classification accuracy. To strengthen field applicability, Attenuated Total Reflectance–Fourier Transform Infrared (ATR-FTIR) spectroscopy was incorporated, achieving 95% accuracy with a similar CNN model. These findings demonstrate the potential of integrating spectroscopy with deep learning for reliable plastic classification, advancing development of scalable, field-ready recycling technologies.

Garcia Tovar, Maria P.↗

DOE OSTI2024

Pressure–Temperature–Magnetic Field Phase Diagram of Multiferroic (NH 4 ) 2 FeCl 5 ·H 2 O

We combined synchrotron-based infrared absorbance and Raman scattering spectroscopies with diamond anvil cell techniques and a symmetry analysis to explore the properties of multiferroic (NH 4 ) 2 FeCl 5 ·H 2 O under extreme pressure–temperature conditions. Compression-induced splitting of the Fe–Cl stretching, Cl–Fe–Cl and Cl–Fe–O bending, and NH 4 + librational modes defines two structural phase transitions, and a group–subgroup analysis reveals space group sequences that vary depending upon proximity to the unexpectedly wide order–disorder transition. Here, we bring these findings together with prior high-field work to develop the pressure–temperature–magnetic field phase diagram uncovering competing polar, chiral, and magnetic phases in this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Attosecond Probing of Coherent Vibrational Dynamics in CBr 4

A coherent vibrational wavepacket is launched and manipulated in the symmetric stretch (a1) mode of CBr 4 , by impulsive stimulated Raman scattering (ISRS) from nonresonant 400 nm laser pump pulses with various peak intensities on the order of tens of 10 12 W/cm 2 . Extreme ultraviolet (XUV) attosecond transient absorption spectroscopy (ATAS) records the wavepacket dynamics as temporal oscillations in XUV absorption energy at the bromine M 4,5 3d 3/2,5/2 edges around 70 eV. The results are augmented by nuclear timedependent Schrödinger equation simulations. Slopes of the (Br 3d 3/2,5/2 ) –1 10a 1 * core-excited state potential energy surface (PES) along the a 1 mode are calculated to be –9.4 eV/Å from restricted open-shell Kohn–Sham calculations. Using analytical relations derived for the small-displacement limit and the calculated slopes of the core-excited state PES, a deeper insight into the vibrational dynamics is obtained by retrieving the experimental excursion amplitude of the vibrational wavepacket and the amount of population transferred to the vibrational first-excited state as a function of pump-pulse peak intensity. Experimentally, the results show that XUV ATAS is capable of resolving oscillations in the XUV absorption energy on the order of a few to tens of meV with tens of femtosecond time precision. This corresponds to change in C–Br bond length on the order of 10 –4 to 10 –3 Å. The results and the analytic relationships offer a clear physical picture, on multiple levels of understanding, of how the pump-pulse peak intensity controls the vibrational dynamics launched by nonresonant ISRS in the small-displacement limit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗