Search NASA⌕ Search

SEARCH · Search NASA

Results for “RESISTANCE DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

LastingNVCache: A Technique for Improving the Lifetime of Non-volatile Caches

Use of NVM (Non-volatile memory) devices such as ReRAM (resistive RAM) and STT-RAM (spin transfer torque RAM) for designing on-chip caches holds the promise of providing a high-density, low-leakage alternative to SRAM. However, low write endurance of NVMs, along with the write-variation introduced by existing cache management schemes may significantly limit the lifetime of NVM caches. We present LastingNVCache, a technique for improving lifetime of NVM caches by mitigating the intra-set write variation. LastingNVCache works on the key idea that by periodically flushing a frequently-written data-item, the next time the block can be made to load into a cold block in the set. Through this, the future writes to that data-item can be redirected from a hot block to a cold block, which leads to improvement in the cache lifetime. Microarchitectural simulations have shown that LastingNVCache provides 6.36X, 9.79X, and 10.94X improvement in lifetime for single, dual and quad-core systems. Also, its implementation overhead is small and it outperforms a recently proposed technique for improving lifetime of NVM caches.

device lifetime↗

Thermoelectrics: From longitudinal to transverse

Thermoelectric power generation is a promising technology to realize a sustainable society because it directly converts thermal energy into electricity in a solid. Conventional thermoelectric generation is driven by the Seebeck effect, discovered by T.J. Seebeck in 1821, in which a charge current J c is generated in the direction parallel to a temperature gradient ∇T, the longitudinal geometry. Here, the ratio between the generated longitudinal electromotive force and applied ∇T is defined as the Seebeck coefficient. As shown in Figure 1A, a thermoelectric module based on the Seebeck effect typically consists of many pairs (128 for a 12V unit) of p-type and n-type conductors alternately arranged and connected in series. Since the Seebeck coefficient of a p-type (n-type) conductor is positive (negative), the thermopower in each element adds to the total output in the Seebeck module. This configuration is needed to achieve a practical voltage because each element only supplies millivolts but limits the use of thermoelectric generators. The efficiency of thermoelectric generators is characterized by the thermoelectric figure of merit, zT. Despite a 3-fold improvement in zT resulting from materials research over the last two decades, little progress has been made in their practical use; this is ascribed to the technological challenges in contact technology. The contacts on the hot side are subject to thermal degradation. All contacts (512 for a 12V unit) add electrical and thermal contact resistances that reduce the device efficiency to a fraction of that promised by the materials.

30 DIRECT ENERGY CONVERSION↗

Probing the Hydrogen Enhanced Near-Field Emission of ITO without a Vacuum-Gap

In-situ monitoring of the multi-component gas streams in high temperature energy conversion devices offer the promises to higher efficiency via improved understanding of the chemical environments during device operation. While conventional resistive based metal oxide semiconductor gas sensors suffer from strong cross-sensitivity, optical sensing approaches offer intrinsic advantages to achieve gas selectivity based on wavelength specific interactions. This manuscript describes a novel method to achieve multicomponent gas sensing during gas exposure of H2, CO2, CH4and CO in humid high temperature environments. A single sensor element comprised of a perovskite La0.3Sr0.7TiO3(LSTO) oxide thin film layer coated on silica optical fiber was used. The sensing responses consisted of two wavelength-specific near infrared (NIR) mechanisms, namely broadband absorption associated with the metal oxide layer, and wavelength localized thermal emission responses associated with the hydroxyl defects within the silica fiber. Principal component analysis (PCA) was applied to couple the two mechanisms to achieve selective gas identification. Successful discrimination of H2and CO2on a single fiber sensor was achieved, where the results are both stable and reversible. This design demonstrates that by coupling multiple optical mechanisms on a single oxide coated fiber sensor, simple platforms can also achieve multi-component sensing functionality without the added complexity of a sensor array. Thus, it suggests a new approach to construct simple, robust and functional sensor designs capable of gas discrimination and quantification in multi-component gas streams.

01 COAL, LIGNITE, AND PEAT↗

Effect of Mn concentration and atomic structure on the magnetic properties of Ge thin films

This work reports on the magnetic properties of Ge{sub 100-x}Mn{sub x} (x=0-24 at. %) films prepared by cosputtering a Ge+Mn target and submitted to cumulative thermal annealing treatments up to 500 deg. C. Both as-deposited and annealed films were investigated by means of compositional analysis, Raman scattering spectroscopy, magnetic force microscopy, superconducting quantum interference device magnetometry, and electrical resistivity measurements. All as-deposited films (either pure or containing Mn) exhibit an amorphous structure, which changes to crystalline as the annealing treatments are performed at increasing temperatures. In fact, the magnetic properties of the present Ge{sub 100-x}Mn{sub x} films are very sensitive to the Mn content and whether their atomic structure is amorphous or crystalline. More specifically: whereas the amorphous Ge{sub 100-x}Mn{sub x} films (with high x) present a characteristic spin glass behavior at low temperature; after crystallization, the films (with moderate Mn contents) are ferromagnetic at room temperature. Moreover, the magnetic behavior of the films scales with their Mn concentration and tends to be more pronounced after crystallization. Finally, the semiconducting behavior of the films, experienced by previous optical studies, was confirmed through electrical measurements, which also indicate the dependence of the resistivity with the atomic composition of the films.

36 MATERIALS SCIENCE↗

Effect of the top electrode materials on the resistive switching characteristics of TiO{sub 2} thin film

Various metals, such as Pt, stainless steel (SUS), Al, Ni, and Ti, were used as a top electrode (TE) to evaluate the dependency of the resistive switching characteristics on the TE of the metal/TiO{sub 2}/Pt structure. The variation of the chemical composition of TiO{sub 2} in the metal/TiO{sub 2}/Pt structure before and after switching was examined to identify the factors affecting the resistive switching characteristics of the samples with various TE materials. In the case of TE/TiO{sub 2}/Pt structures showing unstable resistive switching behavior, e.g., those with the Al, Ni, and Ti TEs, secondary ion mass spectrometry revealed an increase in the oxygen concentration at the interface area between the TE metal and TiO{sub 2}. This suggests that the oxidation reaction at the interface between the TE metal and TiO{sub 2} might cause the TE/TiO{sub 2}/Pt structure to exhibit unstable resistive switching characteristics. According to these results, the oxidation reaction at the interface between the metal TE and TiO{sub 2} thin film is a primary factor affecting the resistive switching characteristics of TiO{sub 2}-based Resistive Random Access Memory devices.

36 MATERIALS SCIENCE↗

Sub-picowatt resolution calorimetry with niobium nitride thin-film thermometer

High-resolution calorimetry has many important applications such as probing nanoscale thermal transport and studying the thermodynamics of biological and chemical systems. In this work, we demonstrated a calorimeter with an unprecedentedly high resolution at room temperature using a high-performance resistive thermometry material, niobium nitride (NbN{sub x}). Based on a theoretical analysis, we first showed that the heat flux resolution of a resistive-thermometry based calorimeter depends on the parasitic thermal conductance of the device and the temperature coefficient of resistance (TCR) of the thermometer, when the noise is limited by the Johnson noise. Based on this analysis, we then developed a calorimeter using NbN{sub x} as the thermometry material because it possesses both high TCR (∼0.67%/K) and a low thermal conductivity (k ∼ 1.1 W/m K). This calorimeter, when used with the modulated heating scheme, demonstrated an unprecedentedly high power resolution of 0.26 pW at room temperature. In addition, NbN{sub x} based resistive thermometry can also be extended to cryogenic temperature, where the TCR is shown to be significantly higher.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A thorough investigation of the progressive reset dynamics in HfO{sub 2}-based resistive switching structures

According to previous reports, filamentary electron transport in resistive switching HfO{sub 2}-based metal-insulator-metal structures can be modeled using a diode-like conduction mechanism with a series resistance. Taking the appropriate limits, the model allows simulating the high (HRS) and low (LRS) resistance states of the devices in terms of exponential and linear current-voltage relationships, respectively. In this letter, we show that this simple equivalent circuit approach can be extended to represent the progressive reset transition between the LRS and HRS if a generalized logistic growth model for the pre-exponential diode current factor is considered. In this regard, it is demonstrated here that a Verhulst logistic model does not provide accurate results. The reset dynamics is interpreted as the sequential deactivation of multiple conduction channels spanning the dielectric film. Fitting results for the current-voltage characteristics indicate that the voltage sweep rate only affects the deactivation rate of the filaments without altering the main features of the switching dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carrier injection engineering in nanowire transistors via dopant and shape monitoring of the access regions

This work theoretically studies the influence of both the geometry and the discrete nature of dopants of the access regions in ultra-scaled nanowire transistors. By means of self-consistent quantum transport simulations, we show that discrete dopants induce quasi-localized states which govern carrier injection into the channel. Carrier injection can be enhanced by taking advantage of the dielectric confinement occurring in these access regions. We demonstrate that the optimization of access resistance can be obtained by a careful control of shape and dopant position. These results pave the way for contact resistance engineering in forthcoming device generations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-organized titanium oxide nano-channels for resistive memory application

Towards developing next generation scalable TiO{sub 2}-based resistive switching (RS) memory devices, the efficacy of 50 keV Ar{sup +}-ion irradiation to achieve self-organized nano-channel based structures at a threshold fluence of 5 × 10{sup 16} ions/cm{sup 2} at ambient temperature is presented. Although x-ray diffraction results suggest the amorphization of as-grown TiO{sub 2} layers, detailed transmission electron microscopy study reveals fluence-dependent evolution of voids and eventual formation of self-organized nano-channels between them. Moreover, gradual increase of TiO/Ti{sub 2}O{sub 3} in the near surface region, as monitored by x-ray photoelectron spectroscopy, establishes the upsurge in oxygen deficient centers. The impact of structural and chemical modification on local RS behavior has also been investigated by current-voltage measurements in conductive atomic force microscopy, while memory application is manifested by fabricating Pt/TiO{sub 2}/Pt/Ti/SiO{sub 2}/Si devices. Finally, the underlying mechanism of our experimental results has been analyzed and discussed in the light of oxygen vacancy migration through nano-channels.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magneto-induced tunability of thermo-spin current in deformed zigzag graphene nanoribbons

The aim of this report is to unfold how the thermo-electric spin-polarized current in a transverse-biased zigzag graphene nanoribbon changes in the presence of uniaxial deformations and uniform perpendicular magnetic field. Employing the two-parameter Hubbard model along with the non-equilibrium Green's function formalism, we found that both uniaxial strain and magnetic field can significantly modulate the bandgap, local distribution of edge states, and the critical transverse electric field needed to achieve the half-metallic phase in the ribbon. Our analysis shows a significant enhancement of the maximum attainable spin-polarized current as functions of both source temperature and contacts temperature difference, with increasing the magnetic field or applying any magnitude of compressive strain. Furthermore, it is shown that the magneto-resistance ratio of the device, can be drastically tuned via strain engineering, reaching values as high as 2 × 10{sup 4}% for compressive strains of 5% magnitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Broadband enhancement of infrared absorption in microbolometers using Ag nanocrystals

High performance microbolometers are widely sought for thermal imaging applications. In order to increase the performance limits of microbolometers, the responsivity of the device to broadband infrared (IR) radiation needs to be improved. In this work, we report a simple, quick, and cost-effective approach to modestly enhance the broadband IR response of the device by evaporating Ag nanocrystals onto the light entrance surface of the device. When irradiated with IR light, strong fields are built up within the gaps between adjacent Ag nanocrystals. These fields resistively generate heat in the nanocrystals and underlying substrate, which is transduced into an electrical signal via a resistive sensing element in the device. Through this method, we are able to enhance the IR absorption over a broadband spectrum and improve the responsivity of the device by ∼11%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reverse degradation of nickel graphene junction by hydrogen annealing

Metal contacts are fundamental building components for graphene based electronic devices and their properties are greatly influenced by interface quality during device fabrication, leading to resistance variation. Here we show that nickel graphene junction degrades after air exposure, due to interfacial oxidation, thus creating a tunneling barrier. Most importantly, we demonstrate that hydrogen annealing at moderate temperature (300 {sup 0}C) is an effective technique to reverse the degradation.

36 MATERIALS SCIENCE↗

Hafnium carbide formation in oxygen deficient hafnium oxide thin films

On highly oxygen deficient thin films of hafnium oxide (hafnia, HfO{sub 2−x}) contaminated with adsorbates of carbon oxides, the formation of hafnium carbide (HfC{sub x}) at the surface during vacuum annealing at temperatures as low as 600 °C is reported. Using X-ray photoelectron spectroscopy the evolution of the HfC{sub x} surface layer related to a transformation from insulating into metallic state is monitored in situ. In contrast, for fully stoichiometric HfO{sub 2} thin films prepared and measured under identical conditions, the formation of HfC{sub x} was not detectable suggesting that the enhanced adsorption of carbon oxides on oxygen deficient films provides a carbon source for the carbide formation. This shows that a high concentration of oxygen vacancies in carbon contaminated hafnia lowers considerably the formation energy of hafnium carbide. Thus, the presence of a sufficient amount of residual carbon in resistive random access memory devices might lead to a similar carbide formation within the conducting filaments due to Joule heating.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved characteristics of amorphous indium-gallium-zinc-oxide-based resistive random access memory using hydrogen post-annealing

The authors report an improvement in resistive switching (RS) characteristics of amorphous indium-gallium-zinc-oxide (a-IGZO)-based resistive random access memory devices using hydrogen post-annealing. Because this a-IGZO thin film has oxygen off-stoichiometry in the form of deficient and excessive oxygen sites, the film properties can be improved by introducing hydrogen atoms through the annealing process. After hydrogen post-annealing, the device exhibited a stable bipolar RS, low-voltage set and reset operation, long retention (>10{sup 5 }s), good endurance (>10{sup 6} cycles), and a narrow distribution in each current state. The effect of hydrogen post-annealing is also investigated by analyzing the sample surface using X-ray photon spectroscopy and atomic force microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In situ synchrotron x-ray studies of epitaxial SrCoO x films during ionic liquid gating

The manipulation of ions in complex oxide materials can be used to mimic brain-like plasticity through changes to the resistivity of a neuromorphic device. Advances in the design of more energy efficient devices require improved understanding of how ions migrate within a material and across its interface. We investigate the exchange of oxygen and hydrogen in a model SrCoO x epitaxial film—a material that transitions between a ferromagnetic metal and antiferromagnetic insulator depending on the oxygen concentration. Changes to the film during ionic liquid gating were measured by in situ synchrotron x-ray techniques as a function of time and gate voltage, examining the reversibility of the oxide over one complete gating cycle. We find that the out-of-plane lattice constant and oxygen vacancy concentration of SrCoO x are largely reversible although changes were observed in the ordered vacancy structure. Our results provide much needed insight into electrolyte-gated phase behavior in the transition metal oxides.

Li, Yan [Argonne National Laboratory (ANL), Argonn↗

A novel path to runaway electron mitigation via deuterium injection and current-driven MHD instability

Relativistic electron (RE) beams at high current density (low safety factor, qa) yet very low free-electron density accessed with D2 secondary injection in the DIII-D and JET tokamak are found to exhibit large-scale MHD instabilities that benignly terminate the RE beam. In JET, this technique has enabled termination of MA-level RE currents without measurable first-wall heating. This scenario thus offers an unexpected alternate pathway to achieve RE mitigation without collisional dissipation. Benign termination is explained by two synergistic effects. First, during the MHD-driven RE loss events both experiment and MHD orbit-loss modeling supports a significant increase in the wetted area of the RE loss. Second, as previously identified at JET and DIII-D, the fast kink loss timescale precludes RE beam regeneration and the resulting dangerous conversion of magnetic to RE kinetic energy. During the termination, the RE kinetic energy is lost to the wall, but the current fully transfers to the cold bulk thus enabling benign Ohmic dissipation of the magnetic energy on longer timescales via a conventional current quench. Hydrogenic (D2) secondary injection is found to be the only injected species that enables access to the benign termination. D2 injection: 1) facilitates access to low qa in existing devices (via reduced collisionality & resistivity), 2) minimizes the RE avalanche by ‘purging’ the high-Z atoms from the RE beam, 3) drives recombination of the background plasma, reducing the density and Alfven time, thus accelerating the MHD growth. Furthermore, this phenomenon is found to be accessible when crossing the low qa stability boundary with rising current, falling toroidal field, or contracting minor radius - the latter being the expected scenario for vertically unstable RE beams in ITER. While unexpected, this path scales favorably to fusion-grade tokamaks and offers a novel RE mitigation scenario in principle accessible with the day-one disruption mitigation system (DMS) of ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Narrow-Bandgap Interband Cascade Thermophotovoltaic Cells

In this paper, we report on the characterization of narrow-bandgap (E g ≈ 0.4 eV, at 300 K) interband cascade thermophotovoltaic (TPV) devices with InAs/GaSb/AlSb type-II superlattice absorbers. Two device structures with different numbers of stages (two and three) were designed and grown to study the influence of the number of stages and absorber thicknesses on the device performance at high temperatures (300-340 K). Maximum power efficiencies of 9.6% and 6.5% with open-circuit voltages of 800 and 530 mV were achieved in the three- and two-stage devices at 300 K, respectively. These results validate the benefits of a multiple-stage architecture with thin individual absorbers for efficient conversion of infrared radiation into electricity from low-temperature heat sources. Additionally, we developed an effective characterization method, based on an adapted version of Suns-V oc technique, to extract the device series and shunt resistance in these TPV cells.

14 SOLAR ENERGY↗

Electrophysical Properties of Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 Surface-Barrier Diodes

Diode structures, obtained by vacuum deposition of Al onto the surface of a p-Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 single crystals, have been manufactured and studied. Applying the Sah-Noyce–Shockley carrier generation-recombination model, a quantitative description of the electrical characteristics of diodes has been achieved. Here, the resistivity of p-Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 crystals was equal to ρ ≈ 400 Ω⋅cm and was determined from the I–V characteristics of the structure with two ohmic contacts, which were obtained by chemical deposition of gold. The activation energy of the dark temperature dependence of resistivity ρ=ρ(T) was equal to ΔE≈0.24 eV. The forbidden gap of p-Cd 0.96 Mn 0.04 Te 0.96 Se 0.04 crystals, found from the optical absorption spectra, was equal to E g =1.495 eV.

42 ENGINEERING↗