Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROLLING MOMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

The influence of wind shear on aerodynamic coefficients

The purpose of this study is to investigate the influence of wind shear on the lift, drag, roll and yaw moments of a wing in a horizontal wind gradient at various elevations and roll angles. The models of wind shear considered are those proposed by Leurs (1973) for atmospheric flow over horizontally homogeneous and uniform terrain. A general series solution for the distribution of lift along the wing span following the method of Houghton and Brock (1970) is employed to compute the loads and moments on the airfoil. Results of the computations indicate that wind shear can have a significant effect on the rolling and yawing moments of the wing of an aircraft flying with one wing low in the atmospheric boundary layer. These moments are directly influenced by the magnitude of the wind gradient in the neutral atmosphere reflected by the magnitude of the friction velocity. The effect of wind shear on lift and drag is negligible. Stability of the atmosphere tends to increase the magnitude of the rolling moment while decreasing its variation with elevation.

Frost, W.↗
NASA NTRS1993

Kinematics and aerodynamics of the velocity vector roll

The velocity vector roll is an angular rotation of an aircraft about its instantaneous velocity vector, constrained to be performed at constant angle-of-attack (AOA), no sideslip, and constant velocity. Consideration of the aerodynamic force equations leads to requirements for body-axis yawing and pitching rotations that satisfy these constraints. Here, the body axis rotations, and the constraints, are used in the moment equations to determine the aerodynamic moments required to perform the velocity vector roll. For representative tactical aircraft, the conditions for maximum pitching moment are a function of orientation, occurring at about 90 deg of bank in a level trajectory. Maximum required pitching moment occurs at peak roll rate, and is achieved at AOA above 45 deg. The conditions for maximum rolling moment depend on the value of the roll mode time constant. For a small time constant (fast response) the maximum rolling moment occurs at maximum roll acceleration and zero AOA, largely independent of aircraft orientation; for a large time constant, maximum required rolling moment occurs at maximum roll rate, at maximum AOA, and at 180 deg of bank in level flight. Maximum yawing moment occurs at maximum roll acceleration, maximum AOA, and is largely independent of airplane orientation.

Durham, Wayne C.↗
NASA NTRS1995

Roll-yaw control at high angle of attack by forebody tangential blowing

The feasibility of using forebody tangential blowing to control the roll-yaw motion of a wind tunnel model is experimentally demonstrated. An unsteady model of the aerodynamics is developed based on the fundamental physics of the flow. Data from dynamic experiments is used to validate the aerodynamic model. A unique apparatus is designed and built that allows the wind tunnel model two degrees of freedom, roll and yaw. Dynamic experiments conducted at 45 degrees angle of attack reveal the system to be unstable. The natural motion is divergent. The aerodynamic model is incorporated into the equations of motion of the system and used for the design of closed loop control laws that make the system stable. These laws are proven through dynamic experiments in the wind tunnel using blowing as the only actuator. It is shown that asymmetric blowing is a highly non-linear effector that can be linearized by superimposing symmetric blowing. The effects of forebody tangential blowing and roll and yaw angles on the flow structure are determined through flow visualization experiments. The transient response of roll and yaw moments to a step input blowing are determined. Differences on the roll and yaw moment dependence on blowing are explained based on the physics of the phenomena.

Pedreiro, N.↗
NASA NTRS1995

Roll-Yaw control at high angle of attack by forebody tangential blowing

The feasibility of using forebody tangential blowing to control the roll-yaw motion of a wind tunnel model is experimentally demonstrated. An unsteady model of the aerodynamics is developed based on the fundamental physics of the flow. Data from dynamic experiments is used to validate the aerodynamic model. A unique apparatus is designed and built that allows the wind tunnel model two degrees of freedom, roll and yaw. Dynamic experiments conducted at 45 degrees angle of attack reveal the system to be unstable. The natural motion is divergent. The aerodynamic model is incorporated into the equations of motion of the system and used for the design of closed loop control laws that make the system stable. These laws are proven through dynamic experiments in the wind tunnel using blowing as the only actuator. It is shown that asymmetric blowing is a highly non-linear effector that can be linearized by superimposing symmetric blowing. The effects of forebody tangential blowing and roll and yaw angles on the flow structure are determined through flow visualization experiments. The transient response of roll and yaw moments to a step input blowing are determined. Differences on the roll and yaw moment dependence on blowing are explained based on the physics of the phenomena.

Pedreiro, N.↗
NASA NTRS1946

The Development of a Lateral-control System for Use with Large-span Flaps

A spoiler-type lateral-control system has been developed for use on the Northrop P-61 airplane. The lateral-control system is to be used with large-span flaps and consists of a thin circular arc spoiler, linked with a short-span plain aileron located just outboard of the spoiler. This unconventional lateral-control system has been accepted with enthusiasm by the pilots who have flown the airplane. The particularly appreciate its characteristic at high speed. The combination of light forges, favorable yawing moment, and low wing torsional moments, make it a very effective, easily applied control. The control available at and through the stall is also remarkably good, although this characteristic may be attributed, in part, to an exceptionally good wing stalling pattern rather than entirely to the use of the spoiler-type aileron. In the landing configuration, the lateral-control effectiveness increases automatically with the extension of wing flaps so that powerful control is available during the approach. There is, however, a decrease in effectiveness for the first 5 percent of the wheel travel with a resultant tendency for inexperienced pilots to overcontrol slightly at low speeds. The fact that the aileron can be fully used at the stall, however, more than compensates for this loss of effectiveness with flaps down and greatly enhances the airplane's landing performance.

AIRPLANES - NORTHROP P-61 FLIGHT TESTS (AMER )↗
NASA NTRS1977

Sources of low-level wind shear around airports

Some potential sources of low-level wind shear in and around airports and their likely effects are probed and analyzed. Wind shear over flat terrain with near-homogeneous surface properties (roughness, specific heat), the turning layer, shear flows over inhomogeneous terrain (airport + urban areas), thunderstorms, turbulent flowfields over bluff bodies (individual buildings), and recirculating wake flow downstream of three-dimensional block bodies are among the topics covered. Overshoot or undershoot of runways, and induced moments (pitch, roll, yaw) in takeoff and landing, and other potential hazards traceable to wind shear patterns at low heights are discussed, with emphasis on mean flow or steady-state wind shear (time-averaged, say 2-min averaged, wind fields). Wind tunnel studies and V/STOL operations are included in the study.

Fichtl, G. H.↗
NASA NTRS1979

Effect of nozzle spacing on ground interference forces for a two jet V/STOL aircraft

The effect of nozzle spacing on ground interference forces was investigated for a two jet V/STOL aircraft design. The need for information on the effect of jet spacing arises because of the tradeoff between mechanical complexity, which calls for close spacing, and roll control moments, which call for wider spacing. The ground interference forces on a two jet V/STOL aircraft model were measured for a range of nozzle spacings. Interference forces showed a complicated behavior with nozzle spacing, fuselage geometry, and height above ground. For some conditions a slight change in nozzle spacing resulted in a fourfold change in the interference force from 3% to 12% of the basic jet thrust. An understanding of the observed aircraft force behavior was developed using detailed measurements of the upwash flow properties, along with force and pressure measurements on a series of two dimensional fuselage representations.

Hill, W. G., Jr.↗
NASA NTRS1939

Pressure-distribution measurements on a tapered wing with a partial-span split flap in curved flight

Pressure-distribution tests were made on the 32-foot whirling arm of the Daniel Guggenheim Airship Institute of a tapered wing to determine the rolling and the yawing moments due to an angular velocity in yaw. The model was tested at 0 degree and 5 degree pitch; 0 degree, 5 degree, and 10 degree yaw; and with split flaps covering 25, 50, 75, and 100 percent of the wing span and deflected 60 degrees. The results are given in the form of load distributions and as calculated moment coefficients. The experimental values of rolling- and yawing- moment coefficients were in fairly close agreement with theory.

Troller, TH↗