Search NASA⌕ Search

SEARCH · Search NASA

Results for “Radical polymerization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Approaches for Exploring the Organic Evolution of Titan's Surface

Saturn's largest moon Titan has a cold, very dense nitrogen atmosphere rich in methane and the hydrocarbon and nitride products of methane photolysis. Sources of energy for atmospheric chemistry include solar ultraviolet radiation, Saturn magnetospheric particles, and galactic cosmic rays. The chemistry of Titan's atmosphere, while interesting from the point of view of planetary photochemistry, is largely free radical driven and therefore not particularly suited to the synthesis of polymeric biomolecules or even their precursors. However, the nature of Titan's atmosphere, in particular its redox state (hydrogen escapes rapidly and is under abundant compared to in the giant planets), and the presence of a variegated surface make consideration of surface chemistry on Titan interesting from an astrobiological viewpoint. Additional information is contained in the original extended abstract.

Beauchamp, P.↗

LDRD Macromolcule Radiolysis Poster

Moving toward a circular carbon economy depends on enabling reuse of carbon-based macromolecules and increased recycling of waste products into higher value products. Macromolecules are challenging to valorize into products easily converted into liquid fuel or chemical feedstocks, due to their large and sometimes heterogeneous network of polymeric bonds. The novel aspect of this project is to show a proof of principle that radiolysis of macromolecules using “waste” radiation from energy production in the presence of radical capping donors presents an attractive opportunity to break down complex macromolecules into smaller molecules while controlling re-polymerization. This approach offers a new, cost-efficient way to utilize “waste” radiation and heat byproducts of nuclear energy production to convert a simple mixture of complex molecules into a complex mixture of small molecules, to be utilized as an energy source by the fuel industry, or to create value-added feedstocks for new polymers or commodity chemicals. Ionizing radiation can be harnessed to convert energy to molecules, adding value to low-value macromolecules as they are broken down into smaller, more easily separated feedstocks or fuels to be converted to a value-added product. This project will test 2 hypotheses. Hypothesis 1: Macromolecular materials that comprise biomass and coal or other macromolecules can be infused with radical capping donors (RCDs), and gamma irradiation of the resulting mixtures will produce ensembles of lower-molecular weight chemicals that can be more easily separated. If this expectation is realized, the conversion chemistry can be optimized by adjusting the feedstock composition, irradiation time, and choice of RCD.

02 - PETROLEUM↗

Radical Nature of C-Lignin

The recently discovered lignin composed of caffeoyl alcohol monolignols or C-lignin is particularly intriguing given its homogeneous, linear polymeric structure and exclusive benzodioxane linkage between monomers. By virtue of this simplified chemistry, the potential emerges for improved valorization strategies with C-lignin relative to other natural heterogeneous lignins. To better understand caffeoyl alcohol polymers, we characterize the thermodynamics of the radical recombination dimerization reactions forming the benzodioxane linkage and the bond dissociation into radical monolignol products. These properties are also predicted for the cross-coupling of caffeoyl alcohol with the natural monolignols, coniferyl alcohol, sinapyl alcohol, and p-coumaryl alcohol, in anticipation of polymers potentially enabled by genetic modification. The average BDEs for the C-lignin benzodioxane $\alpha$- and β-bonds are 56.5 and 63.4 kcal/mol, respectively, with similar enthalpies for heterodimers. The BDE of the $\alpha$-bond within the benzodioxane linkage is consistently greater than that of the β-bond in all dimers of each stereochemical arrangement, explained by the ability the $\alpha$-carbon radical generated to delocalize onto the adjacent phenyl ring. Relative thermodynamics of the heterodimers demonstrates that the substituents on the phenyl ring directly neighboring the bond coupling the monolignols more strongly impact the dimer bond strengths and product stability, compared to the substituents present on the terminal phenyl ring. Enthalpy comparisons furthermore demonstrate that the erythro stereochemical configurations of the benzodioxane bond are slightly less thermodynamically stable than the threo configurations. The overall differences in strength of bonds and reaction enthalpies between stereoisomers are generally found to be insignificant, supporting that postcoupling rearomatization is under kinetic control. Projecting the lowest-energy stereoisomer internal coordinates to longer polymer C-lignin strands highlights how significantly the stereochemical outcomes in polymerization may impact the macromolecular structure and in turn material and chemical properties. Lastly, through these comparisons of geometry, bond strengths, and reaction enthalpies, we shed light on the distinctive properties of C-lignin's radical recombination and decomposition chemistry, and its potential as a natural lignin solution for biorefinery feedstocks and unique materials science applications.

09 BIOMASS FUELS↗

CoFe{sub 2}O{sub 4} Nano-particles for Radical Oxidative Degradation of High Molecular Weight Polybutadiene

Polymer waste production increased dramatically in the last decades, and has reached to 380 million tons (Mt.) in 2015. Due to their long-term stability, these materials impose a serious environmental challenge. Currently, recycling of polymer waste focuses on re-use of actual products, mechanical processing, chemical recycling, and bio-degradation into environmentally friendly materials. In our previous work, we proposed a new approach for radical-initiated oxidative degradation of polymers using cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles. In our current work, we focus on the use of CoFe{sub 2}O{sub 4} nanoparticles as catalysts for radical degradation of high molecular weight polybutadiene. Cobalt ferrite nanoparticles were embedded into the polybutadiene polymeric matrix, with the aim of studying degradation in polymeric products that can be manufactured with catalytic nanoparticles. The polymer degradation process was characterized using gel permeation and size exclusion chromatography measurements, thermogravimetric analysis, FTIR, NMR, and mass spectroscopy. Based on the results from these diverse measurements, we propose a mechanism for the degradation process. Overall, our results show that the radical processes within the polybutadiene polymer lead to two parallel processes: polymer crosslinking and polymer scission. Moreover, we show that the ratio between crosslinking and degradation can be controlled by the reaction duration and catalyst concentration.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hydroxycinnamaldehyde-derived benzofuran components in lignins

Abstract Lignin is an abundant polymer in plant secondary cell walls. Prototypical lignins derive from the polymerization of monolignols (hydroxycinnamyl alcohols), mainly coniferyl and sinapyl alcohol, via combinatorial radical coupling reactions and primarily via the endwise coupling of a monomer with the phenolic end of the growing polymer. Hydroxycinnamaldehyde units have long been recognized as minor components of lignins. In plants deficient in cinnamyl alcohol dehydrogenase, the last enzyme in the monolignol biosynthesis pathway that reduces hydroxycinnamaldehydes to monolignols, chain-incorporated aldehyde unit levels are elevated. The nature and relative levels of aldehyde components in lignins can be determined from their distinct and dispersed correlations in 2D 1H–13C-correlated nuclear magnetic resonance (NMR) spectra. We recently became aware of aldehyde NMR peaks, well resolved from others, that had been overlooked. NMR of isolated low-molecular-weight oligomers from biomimetic radical coupling reactions involving coniferaldehyde revealed that the correlation peaks belonged to hydroxycinnamaldehyde-derived benzofuran moieties. Coniferaldehyde 8-5-coupling initially produces the expected phenylcoumaran structures, but the derived phenolic radicals undergo preferential disproportionation rather than radical coupling to extend the growing polymer. As a result, the hydroxycinnamaldehyde-derived phenylcoumaran units are difficult to detect in lignins, but the benzofurans are now readily observed by their distinct and dispersed correlations in the aldehyde region of NMR spectra from any lignin or monolignol dehydrogenation polymer. Hydroxycinnamaldehydes that are coupled to coniferaldehyde can be distinguished from those coupled with a generic guaiacyl end-unit. These benzofuran peaks may now be annotated and reported and their structural ramifications further studied.

59 BASIC BIOLOGICAL SCIENCES↗

A unifying picture of gas-phase formation and growth of PAH (Polycyclic Aromatic Hydrocarbons), soot, diamond and graphite

A variety of seemingly different carbon formation processes -- polycyclic aromatic hydrocarbons and diamond in the interstellar medium, soot in hydrocarbon flames, graphite and diamond in plasma-assisted-chemical vapor deposition reactors -- may all have closely related underlying chemical reaction mechanisms. Two distinct mechanisms for gas-phase carbon growth are discussed. At high temperatures it proceeds via the formation of carbon clusters. At lower temperatures it follows a polymerization-type kinetic sequence of chemical reactions of acetylene addition to a radical, and reactivation of the resultant species through H-abstraction by a hydrogen atom.

Frenklach, Michael↗

Method to produce colorless, high porosity, transparent polymer aerogels

A method to produce a polymer gel includes dissolving precursors in a solvent to form a precursor solution, the precursors including polymer precursors, a stable free radical, one or more initiating radicals, and one or more stable free radical control agents, and heating the precursor solution to a temperature of polymerization to produce a cross-linked gel. A dried polymer aerogel has a Brunauer-Emmett Teller (BET) surface area over 100 m2/g, porosity of greater than 10%, visible transparency greater than 20%, color rendering index of over 20%, and average pore size of less than 100 nm.

Chintapalli, Mahati↗

All acrylic-based thermoplastic elastomers with high upper service temperature and superior mechanical properties

All acrylic-based thermoplastic elastomers (TPEs) offer potential alternatives to the widely-used styrenic TPEs. However, the high entanglement molecular weight ( M e ) of polyacrylates, as compared to polydienes, leads to “disappointing” mechanical performance as compared to styrenic TPEs. In this study, triblock copolymers composed of alkyl acrylates with different pendant groups and different glass transition temperatures ( T g s), i.e. 1-adamatyl acrylate (AdA) and tetrahydrofurfuryl acrylate (THFA), were synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization. Thermal characterization of the resulting polymers was performed using differential scanning calorimetry (DSC), and the T g s of both segments were observed for the block copolymers. This indication of microphase separation behavior was further demonstrated using atomic-force microscopy (AFM) and small angle X-ray scattering (SAXS). Dynamic mechanical analysis (DMA) showed that the softening temperature of the PAdA domains is 123 °C, which is higher than that of both styrenic TPEs and commercial acrylic based TPEs with poly(methyl methacrylate) (PMMA) hard block. Here, the resulting triblock copolymers also exhibited stress–strain behavior superior to that of conventional all acrylic-based TPEs composed of PMMA and poly( n -butyl acrylate) (PBA) made by controlled radical processes, while the tensile strength was lower than for products made by living anionic polymerization.

36 MATERIALS SCIENCE↗

Europium-doped aluminum oxide phosphors as indicators for frontal polymerization dynamics

In this study, we present an inexpensive and practical method that allows the monitoring and visualization of front polymerization, propagation, and dynamics. Commercially available europium-doped aluminum oxide powders were combined with video imaging to visualize free-radical propagating polymer fronts. In order to demonstrate the applicability of this method, frontal copolymerization reactions of propoxylated glycerin triacrylate (EB53), pentaerythritol triacrylate (PETA), and pentaerythritol tetra-acrylate (PETEA) with 1,1-Bis(tert-butylperoxy)-3,3,5-trimethylcyclohexane (Luperox 231®) as an initiator were studied and compared to the results obtained by IR imaging. Systems exhibiting higher filler loading, higher EB53 content, and less acrylated monomers showed a marked decrease in front velocity, while those with more acrylated monomers and higher crosslinking density showed a marked increase in front velocity. Finally, in order to show the potential of the imaging technique, we studied fronts propagating in planar and spherical geometries.

36 MATERIALS SCIENCE↗

Automatic, simultaneous control of polymer composition and molecular weight during free radical copolymer synthesis

Fully automatic, simultaneous control of polymer composition and molecular weight trajectories during free radical copolymer synthesis was achieved by coupling the continuous ACOMP data stream into a feedback controller which operated pumps for reactor feed of comonomers. The controller operates without recourse to a detailed kinetic model or reactivity ratios. Rather, it uses the fact that instantaneous copolymer chain composition is related to the instantaneous rate of consumption of comonomers, and the rate for each of these is described by rates α 1 and α 2 for comonomers 1 and 2, respectively. The instantaneous weight average molecular weight M w,inst is proportional to total comonomer concentration via a constant p. Hence, target trajectories for composition and M w can be independently prescribed and followed. Finally, since α 1 , α 2 and p are directly measurable from the ACOMP data stream, their values can be constantly updated by the automatic controller during the reaction process to insure the target trajectories are followed.

36 MATERIALS SCIENCE↗

Improved hybrid solar cells via in situ UV-polymerization.

One approach for making inexpensive inorganic-organic hybrid photovoltaic (PV) cells is to fill highly ordered TiO{sub 2} nanotube (NT) arrays with solid organic hole conductors such as conjugated polymers. Here, a new in situ UV polymerization method for growing polythiophene (UV-PT) inside TiO{sub 2} NTs is presented and compared to the conventional approach of infiltrating NTs with pre-synthesized polymer. A nanotubular TiO{sub 2} substrate is immersed in a 2,5-diiodothiophene (DIT) monomer precursor solution and then irradiated with UV light. The selective UV photodissociation of the C-I bond produces monomer radicals with intact {pi}-ring structure that further produce longer oligothiophene/PT molecules. Complete photoluminescence quenching upon UV irradiation suggests coupling between radicals created from DIT and at the TiO{sub 2} surface via a charge transfer complex. Coupling with the TiO{sub 2} surface improves UV-PT crystallinity and {pi}-{pi} stacking; flat photocurrent values show that charge recombination during hole transport through the polymer is negligible. A non-ideal, backside-illuminated setup under illumination of 620-nm light yields a photocurrent density of {approx} 5 {micro}A cm{sup -2} - surprisingly much stronger than with comparable devices fabricated with polymer synthesized ex situ. Since in this backside architecture setup we illuminate the cell through the Ag top electrode, there is a possibility for Ag plasmon-enhanced solar energy conversion. By using this simple in situ UV polymerization method that couples the conjugated polymer to the TiO{sub 2} surface, the absorption of sunlight can be improved and the charge carrier mobility of the photoactive layer can be enhanced.

14 SOLAR ENERGY↗

Spatiotemporal Reaction Dynamics Control in Two‐Photon Polymerization for Enhancing Writing Characteristics

Since 2001, 3D microfabrication based on two‐photon polymerization (TPP) has drawn extensive attention and interest in biology, optics, photonics, material science, and high‐energy physics. The in‐volume fabrication capability due to the threshold behavior of two‐photon absorption enables TPP higher flexibility compared with other nanofabrication techniques. However, as determined by the in‐volume fabrication feature as well as various reaction dynamics, the writing characteristics of TPP, such as throughput, accuracy, surface quality, and fabrication capability, are still limited. Herein, a comprehensive study is performed on the spatiotemporal behavior of reaction dynamics during TPP fabrication, mainly focusing on spatiotemporal characteristics of radical diffusion, photothermal effect, microscale mechanics, and voxel stacking process. Based on the study, a nonsequential fabrication method is established to simultaneously improve key writing characteristics of TPP and realize sharp features, high speeds, large overhang structure, and smooth surfaces. The method established in this work can be applied to improve the performance of functional devices for various fields.

36 MATERIALS SCIENCE↗

What happens when spins meet for ionizing radiation dosimetry?

Electron spin resonance (ESR) and magnetic resonance imaging (MRI) can be used to measure radiation dose deposited in different milieu through its effects. Radiation can break chemical bonds and if they produce stable free radicals, ESR can measure their concentration through their spins and a dose can be inferred. Ionizing radiation can also promote polymerization and in this case proton relaxation times can be measured and an image weighed by T2 can be produced giving spatial information about dose. A review of the basics of these applications is presented concluding with an end-to-end test using a composite Gel-Alanine phantom to validate 3-dimensionally dose distribution delivered in a simulation of Volume Modulated Arch Therapy on the simultaneous treatment of multiple brain metastases. The results obtained with the gel and alanine dosimeters are consistent with the expected by the treatment planning system, showing the potential of this multidosimetric approach and validating dosimetrically the multiple brain metastases treatment using VMAT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A sorghum ascorbate peroxidase with four binding sites has activity against ascorbate and phenylpropanoids

Abstract In planta, H2O2 is produced as a by-product of enzymatic reactions and during defense responses. Ascorbate peroxidase (APX) is a key enzyme involved in scavenging cytotoxic H2O2. Here, we report the crystal structure of cytosolic APX from sorghum (Sorghum bicolor) (Sobic.001G410200). While the overall structure of SbAPX was similar to that of other APXs, SbAPX uniquely displayed four bound ascorbates rather than one. In addition to the ɣ-heme pocket identified in other APXs, ascorbates were bound at the δ-meso and two solvent-exposed pockets. Consistent with the presence of multiple binding sites, our results indicated that the H2O2-dependent oxidation of ascorbate displayed positive cooperativity. Bound ascorbate at two surface sites established an intricate proton network with ascorbate at the ɣ-heme edge and δ-meso sites. Based on crystal structures, steady-state kinetics, and site-directed mutagenesis results, both ascorbate molecules at the ɣ-heme edge and the one at the surface are expected to participate in the oxidation reaction. We provide evidence that the H2O2-dependent oxidation of ascorbate by APX produces a C2-hydrated bicyclic hemiketal form of dehydroascorbic acid at the ɣ-heme edge, indicating two successive electron transfers from a single-bound ascorbate. In addition, the δ-meso site was shared with several organic compounds, including p-coumaric acid and other phenylpropanoids, for the potential radicalization reaction. Site-directed mutagenesis of the critical residue at the ɣ-heme edge (R172A) only partially reduced polymerization activity. Thus, APX removes stress-generated H2O2 with ascorbates, and also uses this same H2O2 to potentially fortify cell walls via oxidative polymerization of phenylpropanoids in response to stress.

Plant Sciences↗

Monitoring detachment and diffusion of metallic species in polycarbonate

Photon absorption is known to create peroxy radicals in polymers, in a process that entails the removal of hydrogen atoms and the subsequent breakage of bonds. Bond-breaking is found to free, from the polymeric matrix, metallic additives which are then able to diffuse out, as evidenced by the change in both the metallic fluorescence yield and the XPS profiles of C, N, and O. Polycarbonate was artificially weathered using UV radiation from mercury emission lines at 365, 405 and 435 nm, followed by thermal treatment. The UV wavelengths used have energies comparable to those of covalent bonds found in polymeric chains. Both processes, light exposure and thermal, have the purpose of stimulating the degradation of polycarbonate.

36 MATERIALS SCIENCE↗

Facile Strategy to Prepare Poly(ionic liquid)-Coated Solid Polymer Electrolytes through Layer-by-Layer Assembly

The inability of solid polymer electrolytes to preserve strong mechanical strength with high ionic conductivity hinders the commercialization of lithium metal batteries (LMBs). The success of fabricating layer-by-layer (LbL)-assembled electrolytes has realized the application of flexible solid polymer electrolytes in electrochemical devices. Here, we demonstrate a rational strategy to construct solid electrolytes coated with multiple ultrathin layers of polyanions (poly(sodium 4-styrenesulfonate)) and polycations (linear poly(1-butyl-3-(4-vinylbenzyl)-1H-imidazolium chloride) (BVIC)/linear poly(PEG 4 -VIC)/SiO 2 -g-poly(PEG 4 -VIC)) using an LbL assembly method. Poly(ionic liquid) backbones and PEG side groups are employed to facilitate the transport of lithium ions via the segmental motion of the macromolecular matrix. The fabricated free-standing membranes exhibited good ionic conductivities of 9.03–10 × 10 –4 S cm –1 . Furthermore, a Li/LiFePO 4 cell assembled with the LbL-membrane electrolytes exhibits an initial high discharge capacity of 143–158 mAhg –1 at 60 °C with high columbic efficiency. In conclusion, this approach, which combines polymer synthesis and LbL self-assembly, is an effective and facile route to fabricate solid polymer electrolyte membranes with superior ionic conductivity and mechanical robustness, which are useful for electrochemical devices and high-voltage battery applications.

25 ENERGY STORAGE↗