Search NASA⌕ Search

SEARCH · Search NASA

Results for “Reference correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Small Earth Observing Satellites Flying with Large Satellites in the A-Train

This paper/poster presents a real-life example of the benefits of flying small satellites with other satellites, large or small, and vice versa. Typically, most small satellites fly payloads consisting of one or two instruments and fly in orbits that are independent from that of other satellites. The science data from these satellites are either used in isolation or correlated with instrument data from other satellites. Data correlation with other satellites is greatly improved when the measurements of the same point or air mass are taken at approximately the same time. Scientists worldwide are beginning to take advantage of the opportunities for improved data correlation, or coincidental science, offered by the international Earth Observing Constellation known as the A-Train (sometimes referred to as the Afternoon Constellation). Most of the A-Train satellites are small - the A-Train is anchored by two large NASA satellites (EOS-Aqua and EOS-Aura), but consists also of 5 small satellites (CloudSat, CALIPSO, PARASOL, OCO and Glory these last two will join in 2009). By flying in a constellation, each mission benefits from coincidental observations from instruments on the other satellites in the constellation. Essentially, from a data point of view, the A-Train can be envisioned as a single, virtual science platform with multiple instruments. Satellites in the A-Train fly at 705 km in sun-synchronous orbits. Their mean local times at the equator are within seconds to a few minutes of each other. This paper describes the challenges of operating an international constellation of independent satellites from the U.S. and Europe to maximize the coincidental science opportunities while at the same time minimizing the level of operational interactions required between team members. The A-Train mission teams have been able to demonstrate that flying as members of an international constellation does not take away the flexibility to accommodate new requirements. Specific examples will be cited, including CloudSat's relocation (to accommodate a new viewing angle for the CALIPSO satellite), Glory's replan to move closer to PARASOL, and OCO's long term plans to minimize on-orbit operations costs while maintaining safety. In all cases, safety is ensured, science returns are enhanced, and operational flexibility is retained to the maximum extent possible.

Kelly, Angelita C.↗
NASA NTRS2014

Design and Development of the SMAP Microwave Radiometer Electronics

The SMAP microwave radiometer will measure land surface brightness temperature at L-band (1413 MHz) in the presence of radio frequency interference (RFI) for soil moisture remote sensing. The radiometer design was driven by the requirements to incorporate internal calibration, to operate synchronously with the SMAP radar, and to mitigate the deleterious effects of RFI. The system design includes a highly linear super-heterodyne microwave receiver with internal reference loads and noise sources for calibration and an innovative digital signal processor and detection system. The front-end comprises a coaxial cable-based feed network, with a pair of diplexers and a coupled noise source, and radiometer front-end (RFE) box. Internal calibration is provided by reference switches and a common noise source inside the RFE. The RF back-end (RBE) downconverts the 1413 MHz channel to an intermediate frequency (IF) of 120 MHz. The IF signals are then sampled and quantized by high-speed analog-to-digital converters in the radiometer digital electronics (RDE) box. The RBE local oscillator and RDE sampling clocks are phase-locked to a common reference to ensure coherency between the signals. The RDE performs additional filtering, sub-band channelization, cross-correlation for measuring third and fourth Stokes parameters, and detection and integration of the first four raw moments of the signals. These data are packetized and sent to the ground for calibration and further processing. Here we discuss the novel features of the radiometer hardware particularly those influenced by the need to mitigate RFI.

radio frequency interference↗
NASA NTRS2013

The Correlation Radiometer - A New Application in MM-Wave Total Power Radiometry

We describe the design and performance of a 180 GHz correlation radiometer suitable for remote sensing. The radiometer provides continuous comparisons between a the observed signal and a reference load to provide stable radiometric baselines. The radiometer was assembled and tested using parts from the GeoSTAR-II instrument and is fully compatible with operation in a synthetic aperture radiometer or as a standalone technology for use in microwave sounding and imaging. This new radiometer was tested over several days easily demonstrating the required 6 hour stability requirement for observations of mean brightness temperature for a geostationary instrument.

Monolithic Microwave Integrated Circuit (MMIC)↗
NASA NTRS2019

Quantifying the Evolution of Molecular Production Rates of Comet 21P/Giacobini–Zinner with iSHELL/NASA-IRTF

This paper presents results from our molecular characterization of comet 21P/Giacobini–Zinner during its 2018 apparition. We followed the comet during four observing runs, for a total of eight nights. The high-resolution spectra of 21P were acquired using iSHELL—the near-infrared high-resolution immersion echelle spectrograph on NASA/IRTF (Maunakea, Hawaii). We detected many cometary emission lines across four customized iSHELL settings in the (2.9–5.2) μm range. CO abundances relative to water displayed a relatively constant behavior during the observing campaign, suggesting a possible correlation between the outgassing of water and CO. While CO mixing ratios in 21P are consistent with the reference median value for Jupiter family comets (JFCs), ethane was depleted relative to the reference median value for JFCs, except for one observing run (August 8 and 9) in which ethane appeared overabundant. We consider several possible causes: an ethane outburst, decreasing outgassing of water, or a seasonal effect owing to nucleus rotation. In the pre-perihelion runs, methanol was overabundant compared with the reference median value for JFCs, however it decreased steadily to a depleted value during 21P’s post-perihelion phase, suggesting a possible seasonal effect. We report 3σ upper limits for acetylene, formaldehyde, ammonia, and methane. The ratios of our measured 3σ upper limits for acetylene and detections of hydrogen cyanide are consistent with the depletion of C2 relative to CN in 21P observed at optical wavelengths. This result confirms that 21P is depleted in the carbon-chain primary volatile responsible for C2.

Faggi, S.↗
NASA NTRS2019

Quantifying the Evolution of Molecular Production Rates of Comet 21P/Giacobini–Zinner with iSHELL/NASA-IRTF

This paper presents results from our molecular characterization of comet 21P/Giacobini-Zinner during its 2018 apparition. We followed the comet during four observing runs, for a total of 8 nights. The high-resolution spectra of 21P were acquired using iSHELL - the near-IR high resolution immersion echelle spectrograph on NASA/IRTF (Mauna Kea, Hawaii). We detected many cometary emission lines across four customized iSHELL settings in the (2.9 – 5.2) μm range. CO abundances relative to water displayed a relatively constant behavior during the observing campaign, suggesting a possible correlation between the outgassing of water and CO. While CO mixing ratios in 21P are consistent with the reference median value for Jupiter Family comets (JFCs), ethane was depleted relative to the reference median value for JFCs, excepting one observing run (8th and 9th Aug) in which ethane appeared overabundant. We consider several possible causes: an ethane outburst, decreasing outgassing of water, or a seasonal effect owing to nucleus rotation. In the pre-perihelion runs, methanol was overabundant compared with the reference median value for JFCs, however it decreased steadily to a depleted value during 21P’s post-perihelion phase, suggesting a possible seasonal effect. We report 3-s upper limits for acetylene, formaldehyde, ammonia and methane. The ratios of our measured 3-s upper limits for acetylene and detections of hydrogen cyanide are consistent with the depletion of C2 relative to CN in 21P observed at optical wavelengths. This result confirms that 21P is depleted in the carbon chain primary volatile responsible for C2 production.

Faggi S.↗
NASA NTRS2017

Buckling Test Results and Preliminary Test and Analysis Correlation from the 8-Foot-Diameter Orthogrid-Stiffened Cylinder Test Article TA02

Results from the testing of cylinder test article SBKF-P2-CYL-TA02 (referred to herein as TA02) are presented. TA02 is an 8-foot-diameter (96-inches), 78.0-inch-long, aluminum-lithium (Al-Li), orthogrid-stiffened cylindrical shell similar to those used in current state-of-the-art launch-vehicle structures and was designed to exhibit global buckling when subjected to combined compression and bending loads. The testing was conducted at the Marshall Space Flight Center (MSFC), February 3-6, 2009, in support of the Shell Buckling Knockdown Factor Project (SBKF). The test was used to verify the performance of a newly constructed buckling test facility at MSFC and to verify the test article design and analysis approach used by the SBKF researchers.

Hilburger, Mark W.↗
DOE OSTI2025

Generation of a fluorescent short-lifetime oxygen nanosensor by coupling of an exciplex forming dye pair

Typical oxygen-sensitive dyes have lifetimes in the μs-ms regime for sensitive oxygen detection based on molecular quenching. Due to the long triplet-state lifetimes and poor quenching efficiency of these probes, it has been difficult to develop short lifetime probes. We have developed oxygen sensors using a short-lifetime dye (∼30–60 ns) that forms an anthracene-aniline exciplex, which is quenched by molecular oxygen through an excited-state charge transfer mechanism. To achieve measurements in aqueous systems, we have tethered the dyes together via a C3 alkyl linker to facilitate greater exciplex formation at low dye concentration (20 μg mL −1 ) and encapsulated the resulting compound into polymeric nanoparticles to form an aqueous-dispersible short-lifetime oxygen nanosensor. The sensors emit at 420 nm (unfolded dye) and 500 nm (exciplex), and the ratiometric Stern-Volmer Constant is 1.52 ± 0.02 L mol −1 , showing good sensitivity from 0 % to 40 % dissolved oxygen without the tradeoff of a long lifetime needed for direct molecular quenching. In this paper, we characterize this sensor for both lifetime-based measurements using time-correlated single-photon counting and ratiometric intensity-based measurements using the unfolded dye emission as an internal reference peak.

Biological and medical sciences↗
DOE OSTI2025

Revealing rotational symmetry breaking charge density wave order in the kagome superconductor (Rb, K)⁢V 3 ⁢Sb 5 by ultrafast pump-probe experiments

The recently discovered Kagome superconductor 𝐴⁢V 3 ⁢Sb 5 (where 𝐴 refers to K, Rb, Cs) has stimulated widespread research interest due to its interplay of nontrivial topology and unconventional correlated physics including charge-density waves (CDW) and superconductivity. The essential prerequisite to understanding the microscopic mechanisms of this complex electronic landscape is to unveil the configuration and symmetry of the charge-density wave order. As to now, little consensus has been made on what symmetry is broken. Herein, we clarify the microscopic structure and symmetry breaking of the CDW phase in RbV 3 ⁢Sb 5 and KV 3 ⁢Sb 5 by ultrafast time-resolved reflectivity. Our approach is based on extracting coherent phonon spectra induced by three-dimensional CDW and comparing them to calculated phonon frequencies via density-functional theory. The combination of these experimental results and calculations provides compelling evidence that the CDW structure of both compounds prevailing up to 𝑇 CDW is the 2 × 2 × 2 staggered inverse Star-of-David pattern with interlayer 𝜋 phase shift, in which the sixfold rotational symmetry is broken. Finally, these observations thus corroborate sixfold rotational symmetry breaking throughout the CDW phase of RbV 3 ⁢Sb 5 and KV 3⁢ Sb 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Contrast Matching Biopolymers: A SANS-Based Approach to Structural Characterization of Chitosan

Immobilizing enzymes in polysaccharide-based matrices has been shown to improve both their stability and their catalytic efficiency. Among available materials, chitosan was selected for its abundance, biocompatibility, and versatility in a range of applications. While the broader aim of this work is to study chitosan as a matrix for immobilizing carbonic anhydrase (CA) for CO₂ capture, this study focused on determining the contrast match point (CMP) of hydrogenated and deuterated chitosan in D₂O:H₂O mixtures to enable future structural investigations using small-angle neutron scattering (SANS). Previous work successfully synthesized deuterated chitosan from Rhizopus oryzae mycelia and assessed the degree of deuteration using Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). Building on this foundation, the current study determined the CMPs of both H-chitosan and D-chitosan by performing SANS measurements across a range of D₂O:H₂O solvent contrasts. The extracted CMPs for both forms correlated well with their respective calculated scattering length densities (SLDs), validating the experimental approach. These results establish a critical reference for selective contrast matching in future SANS studies of carbonic anhydrase immobilized in chitosan matrices, enabling detailed structural analysis of enzyme–matrix interactions.

Kosgallana, Chathurika J [ORNL] (ORCID:00000002851↗
NASA NTRS1994

Venus spherical harmonic gravity model to degree and order 60

The Magellan and Pioneer Venus Orbiter radiometric tracking data sets have been combined to produce a 60th degree and order spherical harmonic gravity field. The Magellan data include the high-precision X-band gravity tracking from September 1992 to May 1993 and post-aerobraking data up to January 5, 1994. Gravity models are presented from the application of Kaula's power rule for Venus and an alternative a priori method using surface accelerations. Results are given as vertical gravity acceleration at the reference surface, geoid, vertical Bouguer, and vertical isostatic maps with errors for the vertical gravity and geoid maps included. Correlation of the gravity with topography for the different models is also discussed.

Konopliv, Alex S.↗
NASA NTRS2010

TERRA Battery Thermal Control Anomaly - Simulation and Corrective Actions

The TERRA spacecraft was launched in December 1999 from Vandenberg Air Force Base, becoming the flagship of NASA's Earth Observing System program to gather data on how the planet's processes create climate. Originally planned as a 5 year mission, it still provides valuable science data after nearly 10 years on orbit. On October 13th, 2009 at 16:23z following a routine inclination maneuver, TERRA experienced a battery cell failure and a simultaneous failure of several battery heater control circuits used to maintain cell temperatures and gradients within the battery. With several cells nearing the minimum survival temperature, preventing the electrolyte from freezing was the first priority. After several reset attempts and power cycling of the control electronics failed to reestablish control authority on the primary side of the controller, it was switched to the redundant side, but anomalous performance again prevented full heater control of the battery cells. As the investigation into the cause of the anomaly and corrective action continued, a battery thermal model was developed to be used in determining the control ability remaining and to simulate and assess corrective actions. Although no thermal model or detailed reference data of the battery was available, sufficient information was found to allow a simplified model to be constructed, correlated against pre-anomaly telemetry, and used to simulate the thermal behavior at several points after the anomaly. It was then used to simulate subsequent corrective actions to assess their impact on cell temperatures. This paper describes the rapid development of this thermal model, including correlation to flight data before and after the anomaly., along with a comparative assessment of the analysis results used to interpret the telemetry to determine the extent of damage to the thermal control hardware, with near-term corrective actions and long-term operations plan to overcome the anomaly.

Grob, Eric W.↗
NASA NTRS1988

Infrared Measurements of Atmospheric Gases Above Mauna Loa, Hawaii, in February 1987

Infrared solar absorption spectra recorded at 0.02/ cm resolution from the National Oceanic and Atmospheric Administration (NOAA) Geophysical Monitoring for Climate Change (GMCC) program station at Mauna Loa, Hawaii (latitude 19.5 deg N, longitude 155.6 deg W, elevation 3.40 km), in February 1997 have been analyzed to determine simultaneous total vertical column amounts for 13 atmospheric gases. Average tropospheric concentrations of CO2, N2O, CH4, and CHCIF2 and the daytime diurnal variations or the total columns of NO and NO2 have also been inferred. The retrieved total columns (in molecules /sq cm) of the nondiurnally varying gases are 1.6 +/- 0.2 x 10(exp 15) for HCl, 5.9 +/- 1.2 x 10(exp 15) for HNO3, 2.0 +/- 0.2 x 10(exp 21) for H2O16, 4.4 +/- 0.7 x 10(exp 18) for H2O18, 2.7 +/- 0.1 x 10(exp 17) for HDO, 2.3 +/- 0.2 x 10(exp 19) for CH4, 5.0 +/- 0.5 x 10(exp 21) for CO2, 6.7 +/- 0.8 x 10(exp 18) for O3, 4.3 +/- 0.4 x 10(exp 18) for N2O, 1.0 +/- 0.2 x 10(exp 16) for C2H6, and 9.7 +/- 2.5 x 10(exp 14) for CHClF2. We compare the total column measurements of HCl and HNO3 with previously reported ground-based, aircraft, and satellite measurements. The results for HCl are or particular interest because of the expected temporal increase in the concentration of this gas in the stratosphere. However, systematic differences among stratospheric HCl total column measurements from 1978 to 1980 and the absence of observations of free tropospheric HCl above Mauna Loa make it impossible to obtain a reliable estimate of the trend in the total burden of HCl. The measured HNO3 total column is consistent with aircraft measurements from approx. 12 km altitude. The O3 total column deduced from the IR spectra agrees with correlative Mauna Loa Umkehr measurements within the estimated error limits. The column-averaged D/H ratio of water vapor is (68 +/- 9) x- 10(exp -6), which is 0.44 +/- 0.06 times the reference value of 155.76 x 10(exp -6) for standard mean ocean water (SMOW). This large depletion in the D content of water vapor is similar to published measurements of the upper troposphere and lower stratosphere. Average tropospheric concentrations deduced for CO2, N2O, and CH4 are in good agreement with correlative NOAA GMCC surface data, indicating consistency between the measurement techniques for determining tropospheric volume mixing ratios. Results of the present study indicate that Mauna Loa is a favorable site for infrared monitoring of atmospheric gases. The site is particularly favorable for monitoring the tropospheric volume mixing ratios of long-lived gases, since the high altitude of the tropopause reduces corrections required to account for the decrease in volume mixing ratio in the stratosphere.

Rinsland, C. P.↗
NASA NTRS2018

Computational Model Prediction and Biological Validation Using Simplified Mixed Field Exposures for the Development of a GCR Reference Field

The yield of chromosomal aberrations has been shown to increase in the lymphocytes of astronauts after long-duration missions of several months in space. Chromosome exchanges, especially translocations, are positively correlated with many cancers and are therefore a potential biomarker of cancer risk associated with radiation exposure. Although extensive studies have been carried out on the induction of chromosomal aberrations by low- and high-LET radiation in human lymphocytes, fibroblasts, and epithelial cells exposed in vitro, there is a lack of data on chromosome aberrations induced by low dose-rate chronic exposure and mixed field beams such as those expected in space. Chromosome aberration studies at NSRL will provide the biological validation needed to extend the computational models over a broader range of experimental conditions (more complicated mixed fields leading up to the galactic cosmic rays (GCR) simulator), helping to reduce uncertainties in radiation quality effects and dose-rate dependence in cancer risk models. These models can then be used to answer some of the open questions regarding requirements for a full GCR reference field, including particle type and number, energy, dose rate, and delivery order. In this study, we designed a simplified mixed field beam with a combination of proton, helium, oxygen, and iron ions with shielding or proton, helium, oxygen, and titanium without shielding. Human fibroblasts cells were irradiated with these mixed field beam as well as each single beam with acute and chronic dose rate, and chromosome aberrations (CA) were measured with 3-color fluorescent in situ hybridization (FISH) chromosome painting methods. Frequency and type of CA induced with acute dose rate and chronic dose rates with single and mixed field beam will be discussed. A computational chromosome and radiation-induced DNA damage model, BDSTRACKS (Biological Damage by Stochastic Tracks), was updated to simulate various types of CA induced by acute exposures of the mixed field beams used for the experiments. The chromosomes were simulated by a polymer random walk algorithm with restrictions to their respective domains in the nucleus [1]. The stochastic dose to the nucleus was calculated with the code RITRACKS [2]. Irradiation of a target volume by a mixed field of ions was implemented within RITRACKs, and the fields of ions can be delivered over specific periods of time, allowing the simulation of dose-rate effects. Similarly, particles of various types and energies extracted from a pre-calculated spectra of galactic cosmic rays (GCR) can be used in RITRACKS. The number and spatial location of DSBs (DNA double-strand breaks) were calculated in BDSTRACKS using the simulated chromosomes and local (voxel) dose. Assuming that DSBs led to chromosome breaks, and simulating the rejoining of damaged chromosomes occurring during repair, BDSTRACKS produces the yield of various types of chromosome aberrations as a function of time (only final yields are presented). A comparison between experimental and simulation results will be shown.

Hada, M.↗
DOE OSTI2026

Quantitative measurement of pebble fuel anisotropy using generalized ellipsometry

The renewed development of high-temperature gas-cooled reactors has created a need to modernize pebble fuel quality control methods. One important specification in these methods is the coefficient of thermal expansion (CTE) anisotropy, which reflects graphite grain alignment and affects fuel performance. This study investigates the feasibility of using two-modulator generalized ellipsometry microscopy (2-MGEM) as a potential surrogate metric for CTE anisotropy. Graphite matrix compacts with controlled levels of anisotropy were fabricated by varying pre-pressures during forming and were subsequently characterized using both optical dilatometry and 2-MGEM. Measured responses were compared to an isotropic reference pebble produced using an industrial manufacturing process to provide a practical baseline. The resulting measurements revealed a strong quantitative correlation between the CTE anisotropy ratio and the corresponding diattenuation ratio. However, propagated measurement uncertainties in the optical method were found to limit definitive pass/fail discrimination, highlighting the need for improved precision before qualification as a quality control tool. Still, the results establish a quantitative relationship between optical and CTE anisotropy and support further development of 2-MGEM as a potential surrogate method for evaluating graphite matrix anisotropy in pebble fuel manufacturing.

Raftery, Alicia [ORNL] (ORCID:0000000259076427)↗
DOE OSTI2026

Electromagnetic Tomography of Radial Flow in the Quark-Gluon Plasma

We present a novel multimessenger approach to extract the effective radial flow of the quark-gluon plasma (QGP) by jointly analyzing thermal photon and dilepton spectra in heavy-ion collisions. A key feature of this method is that it circumvents the need for a directly unmeasurable reference—the photon temperature in the absence of flow—by establishing, within a calibrated model framework, a stable, approximately linear correlation with the dilepton-inferred temperature. This construction defines an experimentally constructible quantity, 𝑣$^{eff}_{𝑟}$, which reflects early-time collectivity and exhibits a strong correlation with the spacetime-averaged radial velocity of the QGP. Together with previous results linking dilepton slopes to the initial QGP temperature, our work establishes a consistent framework for electromagnetic tomography of the QGP. Here, our framework quantifies the experimental precision target, thereby providing a concrete road map for future measurements at RHIC and the LHC and opening a new avenue to probe the early-time dynamics of hot QCD matter.

Collective flow↗
NASA NTRS1972

Hydrogen film/conductive cooling

Small scale nozzle tests using heated nitrogen were run to obtain effectiveness and wall heat transfer data with hydrogen film cooling. Effectiveness data are compared with an entrainment model developed from planar, unaccelerated flow data. Results indicate significant effects due to flow turning and acceleration. With injection velocity effects accounted for explicitly, heat transfer correlation coefficients were found to be the same with and without film cooling when properties are evaluated at an appropriate reference temperature for the local gas composition defined by the coolant effectiveness. A design study for an O2/H2 application with 300 psia (207 N/sq cm) chamber pressure and 1500 lbs (6670 N) thrust indicates an adiabatic wall design requires 4 to 5 percent of the total flow as hydrogen film cooling. Internal regenerative cooling designs were found to offer no reduction in coolant requirements.

Ewen, R. L.↗
NASA NTRS1984

A research program in determination of heavy metals in sediments and benthic species in relation to nuclear power plant operation

Heavy metals in the estuarine environment can be toxic to fish and shellfish early life history stages and concentrations build up to levels of concern in marketable shellfish. The present survey was begun just before startup in 1974 of the 1900 megawatt Calvert Cliffs Nuclear Power Plant on the Chesapeake Bay in order to assess and understand factors relating to heavy metal accumulation in estuarine biota. Oysters were collected in large numbers at test and reference sites in June 1974 to 77 and individually analyzed for copper and zinc. Oyster copper and zinc concentrations were correlated with salinity read at time of collection. The relationship of oyster age to metal concentration was examined with two sets of oysters of known age and genetic origin (laboratory spawned). Copper sorption by typical mid Bay sediments, and field studies on cadmium concentrations in sediments were examined.

Phelps, H. L.↗
NASA NTRS1992

Potential of long-baseline infrared interferometry for narrow-angle astrometry

Narrow-angle astrometry has many astrophysical applications, from the measurement of parallaxes to the search for planets around nearby stars. Ground-based long-focus telescopes with photoelectric detectors have achieved accuracies of about 2-3 milliarcsec in 1 h. This accuracy is limited primarily by the atmosphere, and is consistent with models of atmospheric turbulence. However, applying these turbulence models to observations with long-baseline interferometers yields astrometric errors that are far smaller than can be achieved with long-focus telescopes. The predictions for the ultimate accuracy of ground-based narrow-angle astrometry using long-baseline IR (2.2 micron) stellar interferometers are very promising. With the excellent seeing at a high altitude site like Mauna Kea, the atmospheric limit for a 1 h astrometric measurement is expected to be of the order of 10 microarcsec for 1 h of integration. This two-order-of-magnitude improvement over conventional measurements is due to two effects. One is that a long-baseline IR interferometer can find useful reference stars very near an arbitrary target star, so that the atmospherically-induced motions of both stars are highly correlated. The second is that the baseline length can be much larger than the separation of the stellar beams in the turbulent atmosphere, resulting in a reduction in astrometric error with increasing baseline length.

Shao, M.↗