Search NASA⌕ Search

SEARCH · Search NASA

Results for “Relative Orbit Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Performance Assessment of Two GPS Receivers on Space Shuttle

Space Shuttle STS-69 was launched on September 7, 1995, carrying the Wake Shield Facility (WSF-02) among its payloads. The mission included two GPS receivers: a Collins 3M receiver onboard the Endeavour and an Osborne flight TurboRogue, known as the TurboStar, onboard the WSF-02. Two of the WSF-02 GPS Experiment objectives were to: (1) assess the ability to use GPS in a relative satellite positioning mode using the receivers on Endeavour and WSF-02; and (2) assess the performance of the receivers to support high precision orbit determination at the 400 km altitude. Three ground tests of the receivers were conducted in order to characterize the respective receivers. The analysis of the tests utilized the Double Differencing technique. A similar test in orbit was conducted during STS-69 while the WSF-02 was held by the Endeavour robot arm for a one hour period. In these tests, biases were observed in the double difference pseudorange measurements, implying that biases up to 140 m exist which do not cancel in double differencing. These biases appear to exist in the Collins receiver, but their effect can be mitigated by including measurement bias parameters to accommodate them in an estimation process. An additional test was conducted in which the orbit of the combined Endeavour/WSF-02 was determined independently with each receiver. These one hour arcs were based on forming double differences with 13 TurboRogue receivers in the global IGS network and estimating pseudorange biases for the Collins. Various analyses suggest the TurboStar overall orbit accuracy is about one to two meters for this period, based on double differenced phase residuals of 34 cm. These residuals indicate the level of unmodeled forces on Endeavour produced by gravitational and nongravitational effects. The rms differences between the two independently determined orbits are better than 10 meters, thereby demonstrating the accuracy of the Collins-determined orbit at this level as well as the accuracy of the relative positioning using these two receivers.

Schroeder, Christine A.↗

Earliest abort once around time for the first orbital flight test mission

The earliest abort once around (AOA) time for the first orbital flight test (OFT-1) mission is determined. The latest estimates of vehicle weights and propulsion for OFT-1 are used. Trade analyses to indicate variations in AOA time for shuttle subsystem changes (such as orbital maneuvering system (OMS) or reaction control system (RCS) propellant loadings) are included. In addition, the effects of first stage attitude steering as a function of relative velocity for a nominal profile are presented. Data are presented to indicate the effect of designing first stage steering for earliest AOA time and then having engine out at times after the design point.

Kuhn, A. E.↗

The connection between Venus' free obliquity and its CMB oblateness

The most striking feature of Venus rotational state is its slow retrograde rotation which is apparently maintained by a balance between solid tidal friction and thermal tidal torques. Solid tides tend to drive the spin toward synchronous rotation while thermal tides drive it away. A balance is achieved at a specific rate because of the inverse frequency dependence of the thermal tide to the semi-diurnal heating. Atmospheric models have been constructed to estimate the thermal tidal torque based on ground heating. The solid friction dissipation factor Q approximately equal to 50 can be deduced assuming rotation has achieved steady state. The most perplexing feature of Venus orientation is its non-zero free obliquity epsilon approximately equal to 1.5 deg relative to its orbit. Although solid tides and perhaps atmospheric tides tend to increase the free obliquity on a time 1/K(sub t) approximately equal to 1 x 10(exp 8) yr, viscous friction (CMF) at a core-mantle boundary (CMB) resulting from the differential angular orientation Delta-epsilon of the core and mantle spin axes should have damped the free obliquity on a time scale as short as 10(exp 6) yr. One means of achieving a balance similar to that controlling rotation is to introduce a comparatively large CMB ellipticity e(sub c) to reduce Delta-epsilon such that there is a balance between solid-thermal tides and CMF. The balance depends not so much on the potential frequency dependence on the tides as on the quadratic dependence of CMF on Delta-epsilon if the layer is turbulent.

Yoder, C. F.↗

The landscape of disc outflows from black hole–neutron star mergers

ABSTRACT We investigate mass ejection from accretion discs formed in mergers of black holes (BHs) and neutron stars (NSs). The third observing run of the LIGO/Virgo interferometers provided BH–NS candidate events that yielded no electromagnetic (EM) counterparts. The broad range of disc configurations expected from BH–NS mergers motivates a thorough exploration of parameter space to improve EM signal predictions. Here we conduct 27 high-resolution, axisymmetric, long-term hydrodynamic simulations of the viscous evolution of BH accretion discs that include neutrino emission/absorption effects and post-processing with a nuclear reaction network. In the absence of magnetic fields, these simulations provide a lower limit to the fraction of the initial disc mass ejected. We find a nearly linear inverse dependence of this fraction on disc compactness (BH mass over initial disc radius). The dependence is related to the fraction of the disc mass accreted before the ouflow is launched, which depends on the disc position relative to the innermost stable circular orbit. We also characterize a trend of decreasing ejected fraction and decreasing lanthanide/actinide content with increasing disc mass at fixed BH mass. This trend results from a longer time to reach weak freezout and an increasingly dominant role of neutrino absorption at higher disc masses. We estimate the radioactive luminosity from the disc outflow alone available to power kilonovae over the range of configurations studied, finding a spread of two orders of magnitude. For most of the BH–NS parameter space, the disc outflow contribution is well below the kilonova mass upper limits for GW190814.

79 ASTRONOMY AND ASTROPHYSICS↗

Contribution of Apollo lunar photography to the establishment of selenodetic control

Among the various types of available data relevant to the establishment of geometric control on the moon, the only one covering significant portions of the lunar surface (20%) with sufficient information content, is lunar photography, taken at the proximity of the moon from lunar orbiters. The idea of free geodetic networks is introduced as a tool for the statistical comparison of the geometric aspects of the various data used. Methods were developed for the updating of the statistics of observations and the a priori parameter estimates to obtain statistically consistent solutions by means of the optimum relative weighting concept.

Dermanis, A.↗

The Far Ultraviolet M-dwarf Evolution Survey. I. The Rotational Evolution of High-energy Emissions

M-dwarf stars are prime targets for exoplanet searches because of their close proximity and favorable properties for both planet detection and characterization. However, the potential habitability and atmospheric characterization of these exoplanetary systems depends critically on the history of high-energy stellar radiation from X-rays to NUV, which drive atmospheric mass loss and photochemistry in the planetary atmospheres. With the Far Ultraviolet M-dwarf Evolution Survey, we have assessed the evolution of the FUV radiation, specifically eight prominent emission lines, including Lyα, of M-dwarf stars with stellar rotation period and age. We demonstrate tight power-law correlations between the spectroscopic FUV features, and measure the intrinsic scatter of the quiescent FUV emissions. The luminosity evolution with rotation of these spectroscopic features is well-described by a broken power law, saturated for fast rotators, and decays with increasing Rossby number, with a typical power-law slope of −2, although likely shallower for Lyα. Our regression fits enable FUV emission-line luminosity estimates relative to bolometric from known rotation periods to within ∼0.3 dex, across eight distinct UV emission lines, with possible trends in the fit parameters as a function of source layer in the stellar atmosphere. Our detailed analysis of the UV luminosity evolution with age further shows that habitable-zone planets orbiting lower-mass stars experience much greater high-energy radiative exposure relative the same planets orbiting more massive hosts. Around early- to mid-M dwarfs, these exoplanets, at field ages, accumulate up to 10–20× more EUV energy, relative to modern Earth. Moreover, the bulk of this UV exposure likely takes place within the first Gyr of the stellar lifetime.

J Sebastian Pineda↗

The Improved Orbit Solution and Component Masses of bet LMi

bet LMi is a double-lined visual binary with an orbital period of ∼39 yr. Via a simultaneous fitting to both astrometric and radial velocity measurements, we give a complete and improved orbit solution with high precision. Then, the component masses are precisely determined as 2.98 ± 0.10 M {sub ⊙} and 1.92 ± 0.04 M {sub ⊙} with a relative precision of ∼3%, respectively. The orbital parallax is determined to be 19.6 ± 0.2 mas, which is two times more precise than Hipparcos parallax. With the known apparent magnitudes and magnitude difference of the components, we derive the luminosity of the components as 50.7 ± 1.8 L {sub ⊙} and 9.1 ± 4.1 L {sub ⊙}. The estimated radii of the components are 9.4 ± 0.3 R {sub ⊙} and 3.7 ± 1.5 R {sub ⊙}.

79 ASTRONOMY AND ASTROPHYSICS↗

Lunar satellite techniques applicable to earth satellite geodesy

The techniques considered are related to gravity profiling from Doppler residuals, a solution for a surface mass distribution, and a dynamical approach for the estimation of random forces at each data point. The dynamical approach makes use of a new filtering method which uses sequential estimation theory to determine unknown and somewhat correlated forces which randomly perturb the orbit. It is concluded that lunar data reduction methods would be suitable for applications in connection with the GEOS-C/ATS-F mission.

Sjogren, W. L.↗

Free-Flight Experiments in LISA Pathfinder

The LISA Pathfinder mission will demonstrate the technology of drag-free test masses for use as inertial references in future space-based gravitational wave detectors. To accomplish this, the Pathfinder spacecraft will perform drag-free flight about a test mass while measuring the acceleration of this primary test mass relative to a second reference test mass. Because the reference test mass is contained within the same spacecraft, it is necessary to apply forces on it to maintain its position and attitude relative to the spacecraft. These forces are a potential source of acceleration noise in the LISA Pathfinder system that are not present in the full LISA configuration. While LISA Pathfinder has been designed to meet it's primary mission requirements in the presence of this noise, recent estimates suggest that the on-orbit performance may be limited by this 'suspension noise'. The drift-mode or free-flight experiments provide an opportunity to mitigate this noise source and further characterize the underlying disturbances that are of interest to the designers of LISA-like instruments. This article provides a high-level overview of these experiments and the methods under development to analyze the resulting data.

The technique of drag-free↗

The Eris/Dysnomia System I: The Orbit of Dysnomia

We present new results on the Eris/Dysnomia system including analysis of new images from the WFC3 instru-ment on the Hubble Space Telescope (HST). Seven HST orbits were awarded to program 15171 in January and February 2018, with the intervals between observations selected to sample Dysnomia over a full orbital period. Using relative astrometry of Eris and Dysnomia, we computed a best-fit Keplerian orbit for Dysnomia. Based on the Keplerian fit, we find an orbital period of 15.785899±0.000050 days, which is in good agreement with recent work. We report a non-zero eccentricity of 0.0062 at the 6.2-σ level, despite an estimated eccentricity damping timescale of ≤17 Myr. Considering the volumes of both Eris and Dysnomia, the new system density was calculated to be 2.43±0.05 g cm3, a decrease of ~4% from the previous value of 2.52±0.05 g cm3. The new astrometric measurements were high enough precision to break the degeneracy of the orbit pole orientation, and indicate that Dysnomia orbits in a prograde manner. The obliquity of Dysnomia’s orbit pole with respect to the plane of Eris’ heliocentric orbit was calculated to be 78.29±0.65∘ and is in agreement with previous work; the next mutual events season will occur in 2239. The Keplerian orbit fit to all the data considered in this investi-gation can be excluded at the 6.3-σ level, but identifying the cause of the deviation was outside the scope of this work.

B J Holler↗

Multimegawatt electric propulsion system design considerations

Piloted Mars mission requirements of relatively short trip times and low initial mass in earth orbit as identified by the NASA Space Exploration Initiative, indicate the need for multimegawatt electric propulsion systems. The design considerations and results for two thruster types, the argon ion and hydrogen magnetoplasmadynamic thrusters, are addressed in terms of configuration, performance, and mass projections. Preliminary estimates of Power Management and Distribution for these systems are given. Some assessment of these systems' performance in a reference Space Exploration Initiative piloted mission are discussed. Research and development requirements of these systems are also described.

Gilland, J. H.↗

Multimegawatt electric propulsion system design considerations

Piloted Mars Mission Requirements of relatively short trip times and low initial mass in Earth orbit as identified by the NASA Space Exploration Initiative, indicate the need for multimegawatt electric propulsion systems. The design considerations and results for two thruster types, the argon ion, and hydrogen magnetoplasmadynamic thrusters, are addressed in terms of configuration, performance, and mass projections. Preliminary estimates of power management and distribution for these systems are given. Some assessment of these systems' performance in a reference Space Exploration Initiative piloted mission are discussed. Research and development requirements of these systems are also described.

Gilland, J. H.↗

A determination of the radio-planetary frame tie from comparison of Earth orientation parameters

The orientation of the reference frame of radio source catalogs relative to that of planetary ephemerides, or 'frame tie,' can be a major systematic error source for interplanetary spacecraft orbit determination. This work presents a method of determining the radio-planetary frame tie from a comparison of very long baseline interferometry (VLBI) and lunar laser ranging (LLR) station coordinate and earth orientation parameter estimates. A frame tie result is presented with an accuracy of 25 nrad.

Finger, M. H.↗

Deformation, Ecosystem Structure, and Dynamics of Ice (DESDynI)

The National Research Council Earth Science Decadal Survey, Earth Science Applications from Space, recommends that DESDynI (Deformation, Ecosystem Structure, and Dynamics of Ice), an integrated L-band InSAR and multibeam Lidar mission, launch in the 2010- 2013 timeframe. The mission will measure surface deformation for solid Earth and cryosphere objectives and vegetation structure for understanding the carbon cycle. InSAR has been used to study surface deformation of the solid Earth and cryosphere and more recently vegetation structure for estimates of biomass and ecosystem function. Lidar directly measures topography and vegetation structure and is used to estimate biomass and detect changes in surface elevation. The goal of DESDynI is to take advantage of the spatial continuity of InSAR and the precision and directness of Lidar. There are several issues related to the design of the DESDynI mission, including combining the two instruments into a single platform, optimizing the coverage and orbit for the two techniques, and carrying out the science modeling to define and maximize the scientific output of the mission.

Donnellan, Andrea↗

Shuttle/Agena study. Volume 2, part 3: Preliminary test plans

Proposed testing for the Agena tug program is based upon best estimates of shuttle and Agena tug requirements and upon the Agena configuration currently envisioned to meet these requirements. The proposed tests are presented in development, qualification, system, and launch base test plans. These plans are based upon generalized requirements and assumed situations. The limitations of this study precluded all but minimal consideration of related shuttle orbiter and shuttle ground systems. The test plans include provisions for all testing from major component to systems level, identified as necessary to aid in confirmation of the modified Agena configuration for the space tug; considerations that crew safety requirements and new environmental conditions from shuttle interface effects do impose some new Agena testing requirements; considerations that many existing Agena flight-qualified components will be utilized and qualification testing will be minimal; testing not only for the Agena tug but also for new or modified items of handling or servicing equipment for supporting the Agena factory-to-launch sequence; and the assembly of required testing into a sequence-ordered series of events.

Source record↗

Predictability of the California Current System

The physical and biological oceanography of the Southern California Bight (SCB), a highly productive subregion of the California Current System (CCS) that extends from Point Conception, California, south to Ensenada, Mexico, continues to be extensively studied. For example, the California Cooperative Oceanic Fisheries Investigations (CalCOFI) program has sampled this region for over 50 years, providing an unparalleled time series of physical and biological data. However, our understanding of what physical processes control the large-scale and mesoscale variations in these properties is incomplete. In particular, the non-synoptic and relatively coarse spatial sampling (70km) of the hydrographic grid does not completely resolve the mesoscale eddy field (Figure 1a). Moreover, these unresolved physical variations exert a dominant influence on the evolution of the ecosystem. In recent years, additional datasets that partially sample the SCB have become available. Acoustic Doppler Current Profiler (ADCP) measurements, which now sample upper-ocean velocity between stations, and sea level observations along TOPEX tracks give a more complete picture of the mesoscale variability. However, both TOPEX and ADCP are well-sampled only along the cruise or orbit tracks and coarsely sampled in time and between tracks. Surface Lagrangian drifters also sample the region, although irregularly in time and space. SeaWiFS provides estimates of upper-ocean chlorophyll-a (chl-alpha), usually giving nearly complete coverage for week-long intervals, depending on cloud coverage. Historical ocean color data from the Coastal Zone Color Scanner (CZCS) has been used extensively to determine phytoplankton patterns and variability, characterize the primary production across the SCB coastal fronts, and describe the seasonal and interannual variability in pigment concentrations. As in CalCOFI, these studies described much of the observed structures and their variability over relatively large space and time scales.

Miller, Arthur J.↗

Nonresonance rotation of Venus

Radar observations accumulated over the past 14 yr are used to make a precise estimate of the spin vector of Venus. The results obtained show that the spin vector of Venus may be adequately described in the standard 1950.0 coordinate system by a period of 243.01 + or - 0.03 days (retrograde) and a north pole direction corresponding to alpha = 272.8 + or - 0.5 deg and delta = 67.2 + or - 0.3 deg; the quoted errors represent estimates of 70% confidence intervals. The angular separations between the spin vector and those vectors representing the unit normals to the invariable plane of the solar system and the orbital plane of Venus are found to be 0.5 deg and 2.6 deg, respectively. It is concluded that Venus is not rotating with a resonance spin period relative to the orbit of earth and that the spin of Venus may be in a generalized Cassini state.

Shapiro, I. I.↗

Comparative values of advanced space solar cells

A methodology for deriving a first order dollar value estimate for advanced solar cells which consists of defining scenarios for solar array production and launch to orbit and the associated costs for typical spacecraft, determining that portion affected by cell design and performance and determining the attributable cost differences is presented. Break even values are calculated for a variety of cells; confirming that efficiency and related effects of radiation resistance and temperature coefficient are major factors; array tare mass, packaging and packing factor are important; but cell mass is of lesser significance. Associated dollar values provide a means of comparison.

Slifer, L. W., Jr.↗