Counting schemes for nuclear data acquisition on small computers.
Nuclear data acquisition counting schemes on small computers permitting nuclear pulse spectra accumulation on one-word-per-channel basis
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Nuclear data acquisition counting schemes on small computers permitting nuclear pulse spectra accumulation on one-word-per-channel basis
Computerized solid state charged particle used in dE/dx telescope configuration
Water cooled solenoid capable of producing magnetic field intensities up to 100 kilogauss
There are no author-identified significant results in this report.
There are no author-identified significant results in this report.
Results are reported for observations and analysis of synoptic data on a 1B flare that occurred on January 19, 1972. The observations include large-scale H-alpha movies of the flare and pre-flare developments, OSO-7 satellite data on soft X-ray and EUV developments, magnetograms, and hard X-ray observations. Theoretical force-free magnetic field configurations are compared with structures seen in the soft X-ray, EUV, and H-alpha images, and the evolution of the flare is described. The energy available for the flare is estimated from the change of magnetic field inferred from the H-alpha filtergrams and from force-free field calculations. It is suggested that the flare originated in a twisted filament where it was compressed by emerging fields, and it is shown that the flare started below the corona and appeared to derive its energy from the magnetic fields in or near the filament.
One of the major advantages of uranium hexafluoride reactors for power generation is the simplified fuel reprocessing scheme which the gaseous fuel makes possible. Critical experiments related to the development of the reactors for electric power generation are discussed along with UF6 breeder reactor studies. Previous energy conversion studies are reported, taking into account gas turbine power plants, thermionic conversion, and MHD conversion. Thermodynamic cycle analyses show that high efficiencies can be achieved using UF6 as the working fluid for Rankine or Brayton cycles without requiring excessive temperatures.
Gaseous UF6 fueled breeder reactor design and technical applications of such concepts are summarized. Special attention was given to application in nuclear power plants and to reactor efficiency and safety factors.
A model of a coronal region of enhanced Fe XV and Fe XVI emission is developed and its energy balance is examined using extreme ultraviolet observations from OSO-7 together with calculations of possible force-free coronal magnetic field configurations. The coronal emissions overlying the photospheric boundary between regions of opposite magnetic polarity are found to be associated with generally nonpotential (current-carrying) magnetic fields in the forms of arches with footpoints in regions of opposite polarity. The orientation of these arches relative to the neutral line changes with degree of ionization of the emitting ion (which we infer from our limb observations to be a function of height) and may be evidence of differing electric currents along various field lines. The appearance of a coronal arch, seen side-on, can conveniently be represented by a parabola and a detailed analysis shows this to be a realistic approximation that should be generally useful in analyzing two-dimensional pictures of coronal structures.
Observations of photospheric magnetic fields are reviewed to determine whether changes in such fields can be related to flare activity, assuming that magnetic fields play an active role in providing flare energy. An intimate relation between emerging fields and bright flare knots is noted, and it is shown that the activation and eruption of an H-alpha filament is indicative of a major disruption of a magnetic field just prior to a flare. Observations of twisting motions in a filament just before a flare are discussed, erupting untwisting filaments are taken as unambiguous evidence for restructuring of the magnetic fields associated with flares, and it is argued that magnetic-field changes in the midst of most flares are obvious. It is concluded that successive brightenings in a family of loops may be evidence for the spread of a magnetic-field reconnection point from one field concentration to another and that flares may well take place in regions of field-line reconnection. This latter conclusion is illustrated using an empirical flare model that involves field-line reconnection, filament activation, and emerging magnetic flux.
The X-ray telescope experiment aboard the Skylab/ATM mission provided high-resolution soft X-ray images of the lower corona away from active regions, revealing frequent large-scale transient X-ray enhancements which could often be associated with the disappearance of H-alpha filaments. The X-ray emitting structures featured peak brightnesses similar to those of nonflaring active region structures, durations from 3 to 40 hours, shapes that in general outlined the preexisting H-alpha filaments to as large as 400,000 km, apparent expansion velocities of the order of tens of km/sec, and observed peak temperatures of the order of a few million degrees. One such event is described and analyzed in detail. Two explanations of the events are discussed: (1) excess cool material is present in the filament cavity, contributing to the X-ray enhancement, and (2) the enhancement is due to the compression of preexisting material by a changing magnetic field.
An asymmetric expanding arch photographed in the inner corona with an X-ray telescope on August 13, 1973, is identified as the source of the mass ejected in a white-light transient in the outer corona. The morphology, angular position, estimated mass, and apparent rate of upward acceleration of the lower coronal arch are similar to those of the arch seen passing through the outer corona. The mass of material removed from the lower corona is estimated to be 2 by 10 to the 15th power g, and the upward motion is consistent with a constant acceleration of 12.5 m/sec per sec between 1.3 and 5 solar radii.
An outline is presented of the physical processes involved in the emerging flux model, which appears to explain naturally many solar flare observations. The separate physical phases of the basic model include a preflare heating phase as the new flux emerges, an impulsive phase as high-energy particles are accelerated, a flash (or explosive) phase when the H-alpha intensity increases, and a main phase while it decreases. The extent and morphology of the main phase emission depend on the structure of the magnetic field region in which the new flux finds itself imbedded. It is suggested that a (small) simple loop flare occurs if the new flux appears in a region where no great amount of magnetic energy in excess of potential is stored. A two-ribbon flare occurs if the flux emerges near the polarity inversion line of an active region that has begun to develop filaments.
Design power plant studies were carried out for two applications of the plasma core reactor: (1) As a breeder reactor, (2) As a reactor able to transmute actinides effectively. In addition to the above applications the reactor produced electrical power with a high efficiency. A reactor subsystem was designed for each of the two applications. For the breeder reactor, neutronics calculations were carried out for a U-233 plasma core with a molten salt breeding blanket. A reactor was designed with a low critical mass (less than a few hundred kilograms U-233) and a breeding ratio of 1.01. The plasma core actinide transmutation reactor was designed to transmute the nuclear waste from conventional LWR's. The spent fuel is reprocessed during which 100% of Np, Am, Cm, and higher actinides are separated from the other components. These actinides are then manufactured as oxides into zirconium clad fuel rods and charged as fuel assemblies in the reflector region of the plasma core actinide transmutation reactor. In the equilibrium cycle, about 7% of the actinides are directly fissioned away, while about 31% are removed by reprocessing.
This work consists of design power plant studies for four types of reactor systems: uranium plasma core breeder, uranium plasma core actinide transmuter, UF6 breeder and UF6 actinide transmuter. The plasma core systems can be coupled to MHD generators to obtain high efficiency electrical power generation. A 1074 MWt UF6 breeder reactor was designed with a breeding ratio of 1.002 to guard against diversion of fuel. Using molten salt technology and a superheated steam cycle, an efficiency of 39.2% was obtained for the plant and the U233 inventory in the core and heat exchangers was limited to 105 Kg. It was found that the UF6 reactor can produce high fluxes (10 to the 14th power n/sq cm-sec) necessary for efficient burnup of actinide. However, the buildup of fissile isotopes posed severe heat transfer problems. Therefore, the flux in the actinide region must be decreased with time. Consequently, only beginning-of-life conditions were considered for the power plant design. A 577 MWt UF6 actinide transmutation reactor power plant was designed to operate with 39.3% efficiency and 102 Kg of U233 in the core and heat exchanger for beginning-of-life conditions.
The reactor concept analyzed is a U-233F6 core surrounded by a molten salt (Li(7)F, BeF2, ThF4) blanket. Nuclear survey calculations were carried out for both spherical and cylindrical geometries. Thermodynamic cycle calculations were performed for a variety of Rankine cycles. A conceptual design is presented along with a system layout for a 1000 MW stationary power plant. Advantages of the gas core breeder reactor (GCBR) are as follows: (1) high efficiency; (2) simplified on-line reprocessing; (3) inherent safety considerations; (4) high breeding ratio; (5) possibility of burning all or most of the long-lived nuclear waste actinides; and (6) possibility of extrapolating the technology to higher temperatures and MHD direct conversion.
The program reviewed is a study of the feasibility, design, and optimization of the GCATR. The program is designed to take advantage of initial results and to continue work carried out on the Gas Core Breeder Reactor. The program complements NASA's program of developing UF6 fueled cavity reactors for power, nuclear pumped lasers, and other advanced technology applications. The program comprises: (1) General Studies--Parametric survey calculations performed to examine the effects of reactor spectrum and flux level on the actinide transmutation for GCATR conditions. The sensitivity of the results to neutron cross sections are to be assessed. Specifically, the parametric calculations of the actinide transmutation are to include the mass, isotope composition, fission and capture rates, reactivity effects, and neutron activity of recycled actinides. (2) GCATR Design Studies--This task is a major thrust of the proposed research program. Several subtasks are considered: optimization criteria studies of the blanket and fuel reprocessing, the actinide insertion and recirculation system, and the system integration. A brief review of the background of the GCATR and ongoing research is presented.
A comparison of X-ray filtergrams obtained during the Skylab mission 8 hr before and within 4 hr following 54 active region surges on the disk revealed only 6 cases of long-enduring, large-scale (exceeding 10,000 km) coronal enhancements that might have been associated with surge activity. It is concluded that there is no evidence for any substantial increase in the temperature or amount of coronal material during reported surges.