Search NASA⌕ Search

SEARCH · Search NASA

Results for “STALLING - PREVENTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

A procedure for computation of fully stalled flows in two-dimensional passages

A procedure is described for computation of incompressible, steady, two-dimensional flows in fully stalled diffusers with plenum exit. The procedure is successful in predicting pressure distributions and patterns to the accuracy of the data. The procedure employs a zonal model; this maintains close connections between the modeling and the physics thereby providing insight into critical aspects of modeling separated flows. The procedure presented is also convenient for computing unstalled flows in passages with turbulent boundary layers for either direct or indirect design problems. Computing times are well within engineering feasibility. The concepts developed can be extended to other classes of separated flows; some of these extensions have already been completed and are referenced.

Woolley, R. L.↗
NASA NTRS1978

A laser velocimeter flow survey above a stalled wing

A laser velocimeter operating in the backscatter mode was used to survey the flow about a stalled wing installed in the Langley V/STOL tunnel. Mean velocities and magnitudes of velocity fluctuations were calculated from measurements of two orthogonal components of velocity. Free shear mixing layers above and below a large separated flow region were defined. Velocity power spectra were calculated at two points in the flow field. The flow-field survey was carried out about a rectangular aspect-ratio-8 wing with an airfoil section. The wing angle of attack was 19.4 deg, the Mach number was 0.148, and the nominal Reynolds number was 1 x 1 million.

Young, W. H., Jr.↗
NASA NTRS1978

Observations on the dynamic stall characteristics of advanced helicopter rotor airfoils

A significant amount of research was devoted to understanding the mechanism of dynamic stall delay as applicable to the flow environment of a helicopter rotor in forward flight. One aspect of such research deals with the unsteady characteristics of two-dimensional airfoil sections over a Mach number range from 0.3 to 9.6, since such characteristics can be meaningfully related to rotor performance and loads. This paper summarizes the results of several oscillatory tests carried out on conventional, transonic and BLC-equipped airfoils.

Dadone, L.↗
NASA NTRS1979

Comparison of two flow surveys above stalled wings

A laser velocimeter (LV) surveyed the flow above two stalled wings. Each wing was tested in a different wind tunnel at different Mach numbers. The low-Mach-number test had an angle of attack of 19.4 deg, 0.15 Mach number, and 1 x 1,000,000 Reynolds number. The mean velocities above the reversed, separated flow were closely modeled by error function profiles. Thus, the flow resembled a turbulent free-shear layer. The high-Mach-number test had an angle of attack of 19.5 deg, 0.49 Mach number, and 1,400,000 Reynolds number. A series of strong, discrete vortices were shed from the airfoil crest at regular intervals. Both tests demonstrated the importance of the unsteady part of the velocities.

Young, W. H., Jr.↗
NASA NTRS1979

Preliminary study of pilot lateral control of two light airplanes near the stall

For two representative light, single-engine airplanes the single-axis piloting task of controlling bank angle with combined aileron and rudder, and a two-axis task of controlling bank angle with aileron and sideslip with rudder have been studied. For these tasks existing divergence criteria have been applied to determine conditions for closed-loop stability for selected flight conditions near the stall; in addition closed-loop stability characteristics and airplane response to bank angle command were calculated. Results obtained from applying the divergence criterion and from calculations of airplane responses to bank angle command indicate that aileron-alone bank angle control is marginally acceptable at high angle of attack. Of the two rudder control techniques considered, rudder used with the aileron in controlling bank angle increasd stability and produced satisfactory responses; the combined bank angle and sideslip control task does not warrant further consideration because of the task difficulty and the small improvement indicated in airplane closed-loop response with this technique.

Moul, M. T.↗
NASA NTRS1981

Supersonic Stall Flutter of High Speed Fans

An analytical model is developed for predicting the onset of supersonic stall bending flutter in axial flow compressors. The analysis is based on a modified two dimensional, compressible, unsteady actuator disk theory. It is applied to a rotor blade row by considering a cascade of airfoils whose geometry and dynamic response coincide with those of a rotor blade element at 85 percent of the span height (measured from the hub). The rotor blades are assumed to be unshrouded (i.e., free standing) and to vibrate in their first flexural mode. The effects of shock waves and flow separation are included in the model through quasi-steady, empirical, rotor total-pressure-loss and deviation-angle correlations. The actuator disk model predicts the unsteady aerodynamic force acting on the cascade blading as a function of the steady flow field entering the cascade and the geometry and dynamic response of the cascade. Calculations show that the present model predicts the existence of a bending flutter mode at supersonic inlet Mach numbers. This flutter mode is suppressed by increasing the reduced frequency of the system or by reducing the steady state aerodynamic loading on the cascade. The validity of the model for predicting flutter is demonstrated by correlating the measured flutter boundary of a high speed fan stage with its predicted boundary. This correlation uses a level of damping for the blade row (i.e., the log decrement of the rotor system) that is estimated from the experimental flutter data. The predicted flutter boundary is shown to be in good agreement with the measured boundary.

Adamczyk, J. J.↗
NASA NTRS1981

Stall flutter experiment in a transonic oscillating linear cascade

Two dimensional biconvex airfoils were oscillated at reduced frequencies up to 0.5 based on semi-chord and a free stream Mach number of 0.80 to simulate transonic stall flutter in rotors. Steady-state periodicity was confirmed through end-wall pressure measurements, exit flow traverses, and flow visualization. The initial flow visualization results from flutter tests indicated that the oscillating shock on the airfoils lagged the airfoil motion by as much as 80 deg. These initial data exhibited an appreciable amount of scatter; however, a linear fit of the results indicated that the greatest shock phase lag occurred at a positive interblade phase angle. Photographs of the steady-state and unsteady flow fields reveal some of the features of the lambda shock wave on the suction surface of the airfoils.

Boldman, D. R.↗
NASA NTRS1982

An experimental study of dynamic stall on advanced airfoil sections. Volume 1: Summary of the experiment

The static and dynamic characteristics of seven helicopter sections and a fixed-wing supercritical airfoil were investigated over a wide range of nominally two dimensional flow conditions, at Mach numbers up to 0.30 and Reynolds numbers up to 4 x 10 to the 6th power. Details of the experiment, estimates of measurement accuracy, and test conditions are described in this volume (the first of three volumes). Representative results are also presented and comparisons are made with data from other sources. The complete results for pressure distributions, forces, pitching moments, and boundary-layer separation and reattachment characteristics are available in graphical form in volumes 2 and 3. The results of the experiment show important differences between airfoils, which would otherwise tend to be masked by differences in wind tunnels, particularly in steady cases. All of the airfoils tested provide significant advantages over the conventional NACA 0012 profile. In general, however, the parameters of the unsteady motion appear to be more important than airfoil shape in determining the dynamic-stall airloads.

Mccroskey, W. J.↗
NASA NTRS1982

An experimental study of dynamic stall on advanced airfoil section. Volume 2: Pressure and force data

Experimentally derived force and moment data are presented for eight airfoil sections that were tested at fixed and varying incidence in a subsonic two dimensional stream. Airfoil incidence was varied through sinusoidal oscillations in pitch over a wide range of amplitude and frequency. The surface pressure distribution, as well as the lift, drag, and pitching moment derived therefrom, are displayed in a uniform fashion to delineate the static and dynamic characteristics of each airfoil both in and out of stall.

Mcalister, K. W.↗
NASA NTRS1982

Gas turbine rotor/case structural response to rotating stall: Experimental documentation and analytical approach

The forcing functions and structural responses characterizing gas turbine rotor/case system vibration due to rotating stall in an axial flow compressor are described. Two data sets with fundamentally different response characteristics are presented; one is supersynchronous and the other subsynchronous. Conventional beam element rotor dynamics analysis is shown to be severely limited in its ability to predict these responses. A new analytical approach, which significantly increases structural response predictive capability for these phenomena, is briefly discussed.

Haley, P. J.↗
NASA NTRS1982

An Experimental Study of Dynamic Stall on Advanced Airfoil Sections: Hot-Wire and Hot Film Measurements - Volume 3

Detailed unsteady boundary layer measurements are presented for eight airfoils oscillated in pitch through the dynamic stall regime. The present report (the third of three volumes) describes the techniques developed for analysis and evaluation of the hot film and hot wire signals, offers some interpretation of the results, and tabulates all the cases in which flow reversal has been recorded.

Carr, L. W.↗
NASA NTRS1979

Subsonic-transonic stall flutter study

The objective of the Subsonic/Transonic Stall Flutter Program was to obtain detailed measurements of both the steady and unsteady flow field surrounding a rotor and the mechanical state of the rotor while it was operating in both steady and flutter modes to provide a basis for future analysis and for development of theories describing the flutter phenomenon. The program revealed that while all blades flutter at the same frequency, they do not flutter at the same amplitude, and their interblade phase angles are not equal. Such a pattern represents the superposition of a number of rotating nodal diameter patterns, each characterized by a different amplitude and different phase indexing, but each rotating at a speed that results in the same flutter frequency as seen in the rotor system. Review of the steady pressure contours indicated that flutter may alter the blade passage pressure distribution. The unsteady pressure amplitude contour maps reveal regions of high unsteady pressure amplitudes near the leading edge, lower amplitudes near the trailing.

Stardter, H.↗
NASA NTRS1984

Flight characteristics of a manned, low-speed, controlled deep stall vehicle

A successful manned, low speed, controlled deep stall flight research program was conducted at NASA Ames Research Center's Dryden Flight Research Facility. Piloting techniques were established that enabled the pilot to attain and stabilize on an angle of attack in the 30 deg to 72 deg range. A flight determined aerodynamic data base was established for angles of attack as high as 72 deg. Poor lateral directional flying qualities were encountered at angles of attack above 60 deg. Insight into the high angle of attack lateral directional dynamics was gained through a basic root locus analysis.

Sim, A. G.↗
NASA NTRS1981

Subsonic/transonic stall flutter investigation of a rotating rig

Stall flutter is investigated by obtaining detailed quantitative steady and aerodynamic and aeromechanical measurements in a typical fan rotor. The experimental investigation is made with a 31.3 percent scale model of the Quiet Engine Program Fan C rotor system. Both subsonic/transonic (torsional mode) flutter and supersonic (flexural) flutter are investigated. Extensive steady and unsteady data on the blade deformations and aerodynamic properties surrounding the rotor are acquired while operating in both the steady and flutter modes. Analysis of this data shows that while there may be more than one traveling wave present during flutter, they are all forward traveling waves.

Jutras, R. R.↗
NASA NTRS1984

Flight characteristics of a manned, low-speed, controlled deep stall vehicle

A successful manned, low-speed, controlled deep stall flight research program was conducted at NASA Ames Research Center's Dryden Flight Research Facility. Piloting techniques were established that enabled the pilot to attain and stabilize on an angle of attack in the 30 to 72 deg range. A flight-determined aerodynamic data base was established for angles of attack as high as 72 deg. Poor lateral-directional flying qualities were encountered at angles of attack above 60 deg. Insight into the high angle-of-attack, lateral-directional dynamics was gained through a basic root-locus analysis.

Sim, A. G.↗
NASA NTRS1984

Synthesized airfoil data method for prediction of dynamic stall and unsteady airloads

The synthesized unsteady airfoil data method, which accurately describes the unsteady aerodynamic characteristics of stalled airfoils in the time domain, is expanded and improved. Nine sets of unsteady drag data are synthesized, providing a basis for the successful expansion of the method to include the computation of unsteady pressure drag of airfoils and rotor blades. An improved prediction model for airfoil flow reattachment is incorporated into the method. Application of the model results in a better correlation of analytic predictions with measured full-scale helicopter blade loads and stress data. The results show that it is feasible to generalize the empirical parameters embedded in the method over a range of angles of attack, Mach number, airfoil shape, and sweep angle.

Gangwani, S. T.↗
NASA NTRS1985

Simulator study of the stall departure characteristics of a light general aviation airplane with and without a wing-leading-edge modification

A six-degree-of-freedom nonlinear simulation was developed for a two-place, single-engine, low-wing general aviation airplane for the stall and initial departure regions of flight. Two configurations, one with and one without an outboard wing-leading-edge modification, were modeled. The math models developed are presented simulation predictions and flight-test data for validation purposes and simulation results for the two configurations for various maneuvers and power settings are compared to show the beneficial influence of adding the wing-leading-edge modification.

Riley, D. R.↗
NASA NTRS1986

A new, improved method for separating turbulent boundary layer for aerodynamic performance prediction of trailing edge stall airfoils

A method based on integral techniques is presented to determine the turbulent separation location and separation pressure for trailing edge stall airfoils exhibiting extensive separated flow regions during prestall and poststall conditions. The method and experimental laser velocimetry data in the turbulence amplification region are used to establish a relationship between fluctuating velocity components and mean velocity in the boundary layer. The method is demonstrated for symmetrical, cambered, conventional and supercritical airfoils in the 5-to-21-percent thickness ratio range, and over a Reynolds number range of 2 to 22 million. Good agreement with experimental data is found, and the method is used in conjunction with the NASA Multi-Component Airfoil Computer Program to predict maximum L/D ratios and maximum section/lift coefficients.

Goradia, S.↗