Search NASA⌕ Search

SEARCH · Search NASA

Results for “SYMBOL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Sequence Detection for PPM Optical Communication With ISI

A method of sequence detection has been proposed to mitigate the effects of inter-slot interference and inter-symbol interference (both denoted ISI) in the reception of M-ary pulse-position modulation (PPM) optical signals. The method would make it possible to reduce the error rate for a given slot duration, to use a shorter slot duration (and, hence, to communicate at a higher rate) without exceeding a given error rate, or to use a lower-bandwidth (and, hence, less-expensive) receiver to receive a signal of a given slot width without exceeding a given error rate. In M-ary PPM, a symbol period is divided into M time slots, each of duration T(sub s), and a symbol consists of a binary sequence ones and zeros represented by pulses or the absence of pulses, respectively, in the time slots. At the transmitter, the bit stream is used to modulate a laser, the output of which is constant (either full power or zero power, representing 1 or 0, respectively) during each time slot. However, the signal becomes attenuated (signal photons are lost) in propagation from the transmitter to the receiver and noise enters at the receiver, complicating the problem of determining the timing of the symbol periods and slots and identifying the symbols.

Moision, Bruce↗

Methodology and method and apparatus for signaling with capacity optimized constellations

Communication systems having transmitter, includes a coder configured to receive user bits and output encoded bits at an expanded output encoded bit rate, a mapper configured to map encoded bits to symbols in a symbol constellation, a modulator configured to generate a signal for transmission via the communication channel using symbols generated by the mapper. In addition, the receiver includes a demodulator configured to demodulate the received signal via the communication channel, a demapper configured to estimate likelihoods from the demodulated signal, a decoder that is configured to estimate decoded bits from the likelihoods generated by the demapper. Furthermore, the symbol constellation is a capacity optimized geometrically spaced symbol constellation that provides a given capacity at a reduced signal-to-noise ratio compared to a signal constellation that maximizes d.sub.min.

Barsoum, Maged F.↗

Multiple-Bit Differential Detection of OQPSK

A multiple-bit differential-detection method has been proposed for the reception of radio signals modulated with offset quadrature phase-shift keying (offset QPSK or OQPSK). The method is also applicable to other spectrally efficient offset quadrature modulations. This method is based partly on the same principles as those of a multiple-symbol differential-detection method for M-ary QPSK, which includes QPSK (that is, non-offset QPSK) as a special case. That method was introduced more than a decade ago by the author of the present method as a means of improving performance relative to a traditional (two-symbol observation) differential-detection scheme. Instead of symbol-by-symbol detection, both that method and the present one are based on a concept of maximum-likelihood sequence estimation (MLSE). As applied to the modulations in question, MLSE involves consideration of (1) all possible binary data sequences that could have been received during an observation time of some number, N, of symbol periods and (2) selection of the sequence that yields the best match to the noise-corrupted signal received during that time. The performance of the prior method was shown to range from that of traditional differential detection for short observation times (small N) to that of ideal coherent detection (with differential encoding) for long observation times (large N).

Simon, Marvin↗

Qualitative Event-Based Fault Isolation under Uncertain Observations

For many systems, automatic fault diagnosis is critical to ensuring safe and efficient operation. Fault isolation is performed by analyzing measured signals from the system, and reasoning over the system behavior to determine which faults have occurred, based on models of predicted faulty behavior. For dynamic systems, reasoning may be performed using qualitative analysis of the differences between measured signals and their predicted values, in which observations take the form of qualitative symbols. Such an approach is quick to isolate faults, but depends critically on correct generation of the qualitative symbols from the signals. In this paper, we develop an approach to qualitative event-based fault isolation for dynamic systems that is robust to incorrect qualitative observations. Observations are treated as uncertain, where multiple interpretations of an observation, each with its own probability, are considered. By interpreting observed symbols in a probabilistic manner, the approach degrades gracefully as the number of incorrectly-generated symbols increases. The approach is demonstrated on an electrical power system testbed, and experiments using real data obtained from the hardware demonstrate the improved fault isolation performance in the presence of incorrect symbol generation.

Daigle, Matthew↗

Feedback-Driven Dynamic Invariant Discovery

Program invariants can help software developers identify program properties that must be preserved as the software evolves, however, formulating correct invariants can be challenging. In this work, we introduce iDiscovery, a technique which leverages symbolic execution to improve the quality of dynamically discovered invariants computed by Daikon. Candidate invariants generated by Daikon are synthesized into assertions and instrumented onto the program. The instrumented code is executed symbolically to generate new test cases that are fed back to Daikon to help further re ne the set of candidate invariants. This feedback loop is executed until a x-point is reached. To mitigate the cost of symbolic execution, we present optimizations to prune the symbolic state space and to reduce the complexity of the generated path conditions. We also leverage recent advances in constraint solution reuse techniques to avoid computing results for the same constraints across iterations. Experimental results show that iDiscovery converges to a set of higher quality invariants compared to the initial set of candidate invariants in a small number of iterations.

Daikon↗

Spectral characteristics of convolutionally coded digital signals

The power spectral density of the output symbol sequence of a convolutional encoder is computed for two different input symbol stream source models, namely, an NRZ signaling format and a first-order Markov source. The effects of alternate symbol inversion on this spectrum are also considered. The mathematical results are illustrated with many examples corresponding to optimal performance codes. It is demonstrated that only for the case of a purely random input source (e.g., NRZ data with equiprobable symbols) and a particular class of codes is the output spectrum identical to the input spectrum except for a frequency scaling (expansion) by the reciprocal of the code rate.

Divsalar, D.↗

Test Sequences for Reed-Solomon Encoders

Theory of Reed-Solomon codes yields sequences of input test symbols. Two specific sequences worked out for codes of 8 bits per symbol with 223 information symbols and 32 parity check symbols per code words. Test patterns also used for decoders.

Lee, J. J.↗

On the probability of undetected error for the maximum distance separable codes

The performance of maximum-distance-separable codes with symbols from GF(1) when they are used for pure error detection or for simultaneous error correction and detection is investigated. These codes are good for symbol error detection. Their probability of undetected error is upper bounded by q to the -r and decreases monotonically as the symbol error probability epsilon decreases from (q-1)/q to 0, where r is the number of parity-check symbols of a code.

Kasami, T.↗

On the probability of undetected error for the maximum distance separable codes

The performance of maximum-distance-separable codes with symbols from GF(1) when they are used for pure error detection or for simultaneous error correction and detection is investigated. These codes are good for symbol error detection. Their probability of undetected error is upper bounded by q to the -r and decreases monotonically as the symbol error probability epsilon decreases from (q-1)/q to 0, where r is the number of parity-check symbols of a code.

Kasami, T.↗

Single-Chip VLSI Reed-Solomon Encoder

Reed-Solomon (RS) encoder based on Berlekamp bit-serial multiplier algorithm. RS code standard, based on code words of 255 8-bit symbols, of which 223 symbols convey information and remaining 32 are check symbols. This code enables correction of up to 16 erroneous information symbols per word. Berlekamp algorithm based on code-generating polynomial with 32 roots that occur in reciprocal pairs. Choice of algorithm permits compact design.

Truong, T. K.↗

Erasure information for a Reed-Solomon decoder

Many Reed-Solomon decoders, including the one decoding the outer code for Voyager data from Uranus, assume that all symbols have the same chance of being correct or incorrect. Insome cases, like in a burst of incorrect symbols, this is not the case, and a Reed-Solomon decoder could make use of this. The use of information about bit quality sent to the Reed-Solomon from an (inner) Viterbi decoder is examined, as well as information about the error status of adjacent symbols in decoding interleaved Reed-Solomon encoded symbols. It is discovered that, in a region of interest, only about 0.04 dB can gained.

Pitt, G. H., III↗

SNR estimation for the baseband assembly

The expected value and the variance of the Baseband Assembly symbol signal-to-noise ratio (SNR) estimation algorithm are derived. The SNR algorithm treated here is designated as the Split Symbol Moments Estimator (SSME). It consists of averaging the first two moments of the integrated half symbols. The SSME is a biased, consistent estimator. The SNR degradation factor due to the jitter in the subcarrier demodulation and symbol synchronization loops is taken into account. Curves of the expected value of the SNR estimator versus the actual SNR are presented.

Simon, M. K.↗

STAR (Simple Tool for Automated Reasoning): Tutorial guide and reference manual

STAR is an interactive, interpreted programming language for the development and operation of Artificial Intelligence application systems. The language is intended for use primarily in the development of software application systems which rely on a combination of symbolic processing, central to the vast majority of AI algorithms, with routines and data structures defined in compiled languages such as C, FORTRAN and PASCAL. References to routines and data structures defined in compiled languages are intermixed with symbolic structures in STAR, resulting in a hybrid operating environment in which symbolic and non-symbolic processing and organization of data may interact to a high degree within the execution of particular application systems. The STAR language was developed in the course of a project involving AI techniques in the interpretation of imaging spectrometer data and is derived in part from a previous language called CLIP. The interpreter for STAR is implemented as a program defined in the language C and has been made available for distribution in source code form through NASA's Computer Software Management and Information Center (COSMIC). Contained within this report are the STAR Tutorial Guide, which introduces the language in a step-by-step manner, and the STAR Reference Manual, which provides a detailed summary of the features of STAR.

Borchardt, G. C.↗

STAR - A computer language for hybrid AI applications

Constructing Artificial Intelligence application systems which rely on both symbolic and non-symbolic processing places heavy demands on the communication of data between dissimilar languages. This paper describes STAR (Simple Tool for Automated Reasoning), a computer language for the development of AI application systems which supports the transfer of data structures between a symbolic level and a non-symbolic level defined in languages such as FORTRAN, C and PASCAL. The organization of STAR is presented, followed by the description of an application involving STAR in the interpretation of airborne imaging spectrometer data.

Borchardt, G. C.↗

On codes with multi-level error-correction capabilities

In conventional coding for error control, all the information symbols of a message are regarded equally significant, and hence codes are devised to provide equal protection for each information symbol against channel errors. However, in some occasions, some information symbols in a message are more significant than the other symbols. As a result, it is desired to devise codes with multilevel error-correcting capabilities. Another situation where codes with multi-level error-correcting capabilities are desired is in broadcast communication systems. An m-user broadcast channel has one input and m outputs. The single input and each output form a component channel. The component channels may have different noise levels, and hence the messages transmitted over the component channels require different levels of protection against errors. Block codes with multi-level error-correcting capabilities are also known as unequal error protection (UEP) codes. Structural properties of these codes are derived. Based on these structural properties, two classes of UEP codes are constructed.

Lin, Shu↗

Efficient parallel algorithms for string editing and related problems

The string editing problem for input strings x and y consists of transforming x into y by performing a series of weighted edit operations on x of overall minimum cost. An edit operation on x can be the deletion of a symbol from x, the insertion of a symbol in x or the substitution of a symbol x with another symbol. This problem has a well known O((absolute value of x)(absolute value of y)) time sequential solution (25). The efficient Program Requirements Analysis Methods (PRAM) parallel algorithms for the string editing problem are given. If m = ((absolute value of x),(absolute value of y)) and n = max((absolute value of x),(absolute value of y)), then the CREW bound is O (log m log n) time with O (mn/log m) processors. In all algorithms, space is O (mn).

Apostolico, Alberto↗

Execution environment for intelligent real-time control systems

Modern telerobot control technology requires the integration of symbolic and non-symbolic programming techniques, different models of parallel computations, and various programming paradigms. The Multigraph Architecture, which has been developed for the implementation of intelligent real-time control systems is described. The layered architecture includes specific computational models, integrated execution environment and various high-level tools. A special feature of the architecture is the tight coupling between the symbolic and non-symbolic computations. It supports not only a data interface, but also the integration of the control structures in a parallel computing environment.

Sztipanovits, Janos↗

Open-loop frequency acquisition for suppressed-carrier biphase signals using one-pole arm filters

Open loop frequency acquisition performance is discussed for suppressed carrier binary phase shift keyed signals in terms of the probability of detecting the carrier frequency offset when the arms of the Costas loop detector have one pole filters. The approach, which does not require symbol timing, uses fast Fourier transforms (FFTs) to detect the carrier frequency offset. The detection probability, which depends on both the 3 dB arm filter bandwidth and the received symbol signal to noise ratio, is derived and is shown to be independent of symbol timing. It is shown that the performance of this technique is slightly better that other open loop acquisition techniques which use integrators in the arms and whose detection performance varies with symbol timing.

Shah, B.↗