Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scaling behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Multi-Scale Thermo-Mechanical Modeling of Porous 3D Woven TPS Materials

This work summarizes the process to compute and analyze the thermal conductivity and mechanical properties of 3D woven TPS materials such as 3MDCP (3D Mid-Density Carbon-Phenolic). The PuMA software, developed at NASA Ames, was used to characterize different 3MDCP samples from their constituents' data, averaging their thermal conductivity and elastic properties in the three main directions to obtain their effective orthotropic thermo-mechanical properties. This was performed in multiple steps: firstly, TPS samples were digitally reconstructed using micro computed tomography (µCT) and their constituents were segmented; then, the porous matrix phase was analyzed at the micro-scale and these results were used, along with the fibers’ constituents information, to model the tows at the meso-scale; finally, results from the constituents were homogenized and used to model the thermo-mechanical behavior of the unit cell at the macro-scale. Additionally, to gain a better understanding of the tows’ morphology and distribution of the carbon-phenolic blended fibers, microscopy images of the tows’ cross-section were segmented using deep learning techniques and analyzed with PuMA. This workflow can be applied to any TPS material to computationally obtain its thermo-mechanical properties, enabling more informed TPS design and manufacturing choices.

Multi-Scale↗
NASA NTRS1986

Adherent Al2O3 scales produced on undoped NiCrAl alloys

Repeated oxidation and polishing of high purity Ni-15Cr-13Al has dramatically changed its cyclic oxidation behavior from nonadherent to adherent. No apparent change in scale phase, morphology or interface structure occurred during this transition, dismissing any mechanism based on pegging, vacancy sink, or growth stress. The principle change that did occur was a reduction in the sulfur content from 10 ppmw to 3 ppmw after 25 cycles at 1120 C. These observations are used to support the model of Al2O3 scale adherence put forth by Smeggil et al. which claims that Al2O3 scale spallation occurs due to sulfur segregation and bond deterioration at the oxide-metal interface.

Smialek, James L.↗
NASA NTRS1977

Concepts and methods for describing critical phenomena in fluids

The predictions of theoretical models for a critical-point phase transistion in fluids, namely the classical equation with third-degree critical isotherm, that with fifth-degree critical isotherm, and the lattice gas, are reviewed. The renormalization group theory of critical phenomena and the hypothesis of universality of critical behavior supported by this theory are discussed as well as the nature of gravity effects and how they affect cricital-region experimentation in fluids. The behavior of the thermodynamic properties and the correlation function is formulated in terms of scaling laws. The predictions of these scaling laws and of the hypothesis of universality of critical behavior are compared with experimental data for one-component fluids and it is indicated how the methods can be extended to describe critical phenomena in fluid mixtures.

Sengers, J. V.↗
NASA NTRS1985

Evaluation of 16 measures of mental workload using a simulated flight task emphasizing mediational activity

As aircraft and other systems become more automated, a shift is occurring in human operator participation in these systems. This shift is away from manual control and toward activities that tap the higher mental functioning of human operators. Therefore, an experiment was performed in a moving-base flight simulator to assess mediational (cognitive) workload measurement. Specifically, 16 workload estimation techniques were evaluated as to their sensitivity and intrusion in a flight task emphasizing mediational behavior. Task loading, using navigation problems presented on a display, was treated as an independent variable, and workload-measure values were treated as dependent variables. Results indicate that two mediational task measures, two rating scale measures, time estimation, and two eye behavior measures were reliably sensitive to mediational loading. The time estimation measure did, however, intrude on mediational task performance. Several of the remaining measures were completely insensitive to mediational load.

Wierwille, W. W.↗
NASA NTRS1998

Multi-Scale Fractal Analysis of Image Texture and Pattern

Fractals embody important ideas of self-similarity, in which the spatial behavior or appearance of a system is largely independent of scale. Self-similarity is defined as a property of curves or surfaces where each part is indistinguishable from the whole, or where the form of the curve or surface is invariant with respect to scale. An ideal fractal (or monofractal) curve or surface has a constant dimension over all scales, although it may not be an integer value. This is in contrast to Euclidean or topological dimensions, where discrete one, two, and three dimensions describe curves, planes, and volumes. Theoretically, if the digital numbers of a remotely sensed image resemble an ideal fractal surface, then due to the self-similarity property, the fractal dimension of the image will not vary with scale and resolution. However, most geographical phenomena are not strictly self-similar at all scales, but they can often be modeled by a stochastic fractal in which the scaling and self-similarity properties of the fractal have inexact patterns that can be described by statistics. Stochastic fractal sets relax the monofractal self-similarity assumption and measure many scales and resolutions in order to represent the varying form of a phenomenon as a function of local variables across space. In image interpretation, pattern is defined as the overall spatial form of related features, and the repetition of certain forms is a characteristic pattern found in many cultural objects and some natural features. Texture is the visual impression of coarseness or smoothness caused by the variability or uniformity of image tone or color. A potential use of fractals concerns the analysis of image texture. In these situations it is commonly observed that the degree of roughness or inexactness in an image or surface is a function of scale and not of experimental technique. The fractal dimension of remote sensing data could yield quantitative insight on the spatial complexity and information content contained within these data. A software package known as the Image Characterization and Modeling System (ICAMS) was used to explore how fractal dimension is related to surface texture and pattern. The ICAMS software was verified using simulated images of ideal fractal surfaces with specified dimensions. The fractal dimension for areas of homogeneous land cover in the vicinity of Huntsville, Alabama was measured to investigate the relationship between texture and resolution for different land covers.

Emerson, Charles W.↗
NASA NTRS1996

Evaluating Sleep Disturbance: A Review of Methods

There are three general approaches to evaluating sleep disturbance in regards to noise: subjective, behavioral, and physiological. Subjective methods range from standardized questionnaires and scales to self-report measures designed for specific research questions. There are two behavioral methods that provide useful sleep disturbance data. One behavioral method is actigraphy, a motion detector that provides an empirical estimate of sleep quantity and quality. An actigraph, worn on the non-dominant wrist, provides a 24-hr estimate of the rest/activity cycle. The other method involves a behavioral response, either to a specific probe or stimuli or subject initiated (e.g., indicating wakefulness). The classic, gold standard for evaluating sleep disturbance is continuous physiological monitoring of brain, eye, and muscle activity. This allows detailed distinctions of the states and stages of sleep, awakenings, and sleep continuity. Physiological delta can be obtained in controlled laboratory settings and in natural environments. Current ambulatory physiological recording equipment allows evaluation in home and work settings. These approaches will be described and the relative strengths and limitations of each method will be discussed.

Smith, Roy M.↗
NASA NTRSDate not supplied

Maintaining the Continuity of the Global Climate Data Record of Lightning from Space

Lightning is a natural hazard, an indicator of changes in convective storm behavior across multiple spatial and temporal scales, and a major influence on climate-affecting chemicals such as ozone and methane. Lightning also has substantial impacts on the near-space environment. As such, the World Meteorological Organization (WMO) has designated lightning as an Essential Climate Variable (ECV); that is, a measurement that is really important for understanding Earth’s climate. Spaceborne lightning observations are the gold standard for measuring global lightning, as the detection efficiency is more spatially uniform compared to ground-based lightning measurements. In addition, spaceborne is the only practical method for measuring total lightning (i.e., both intracloud and cloud-to-ground) at the global scale, as ground-based networks have limited ability to detect intracloud lightning at long distances (e.g., over oceans, far from land-based sensors). Since 1995, with only a two-year gap (2015-2017), lightning has been observed globally using a combination of Optical Transient Detector (OTD) and Lightning Imaging Sensor (LIS) instruments. However, the year 2023 is the planned end for the International Space Station (ISS) LIS mission, and there is no designated low-Earth orbit (LEO) successor yet identified. Since 2017, geostationary (GEO) observations of lightning have become increasingly available. These include the U.S. Geostationary Lightning Mappers (GLMs), China’s Lightning Mapping Imager (LMI), and Europe’s Lightning Imager (LI). While GEO provides continuous, quasi-hemispheric coverage of lightning and thunderstorms, there are current gaps preventing global coverage, particularly in portions of Asia and the western Pacific, as well as high-latitude regions. Moreover, integration of the GEO constellation into a Climate Data Record (CDR) of lightning is a major challenge only recently begun to be addressed by the WMO. Furthermore, recent work has demonstrated some deficiencies in the global record of lightning from space. For example, small lightning flashes are very common in severe weather, but are difficult to observe using the present set of spaceborne lightning imagers. Moreover, some types of lightning are best observed using frequencies other than the commonly used near-infrared (777-nm), including ultraviolet and the radio spectrum. Finally, it is not possible to assess the vertical distribution of lightning globally, even though this measurement is highly relevant to thunderstorm behavior as well as lightning’s effects on greenhouse gases and the near-space environment. This presentation will provide a current assessment of lightning measurements from space, will identify significant current and future gaps in these observations, and will evaluate potential solutions for improving the overall CDR of global lightning.

Timothy Lang↗
NASA NTRS1990

Sensitivity of the normalized difference vegetation index to subpixel canopy cover, soil albedo, and pixel scale

An analytical framework is provided for examining the physically based behavior of the normalized difference vegetation index (NDVI) in terms of the variability in bulk subpixel landscape components and with respect to variations in pixel scales, within the context of the stochastic-geometric canopy reflectance model. Analysis focuses on regional scale variability in horizontal plant density and soil background reflectance distribution. Modeling is generalized to different plant geometries and solar angles through the use of the nondimensional solar-geometric similarity parameter. Results demonstrate that, for Poisson-distributed plants and for one deterministic distribution, NDVI increases with increasing subpixel fractional canopy amount, decreasing soil background reflectance, and increasing shadows, at least within the limitations of the geometric reflectance model. The NDVI of a pecan orchard and a juniper landscape is presented and discussed.

Jasinski, Michael F.↗
NASA NTRS1995

Flexure fatigue testing of 90 deg graphite/epoxy composites

A great deal of research has been performed characterizing the in-plane fiber-dominated properties, under both static and fatigue loading, of advanced composite materials. To the author's knowledge, no study has been performed to date investigating fatigue characteristics in the transverse direction. This information is important in the design of bonded composite airframe structure where repeated, cyclic out-of-plane bending may occur. Recent tests characterizing skin/stringer debond failures in reinforced composite panels where the dominant loading in the skin is flexure along the edge of the frame indicate failure initiated either in the skin or else the flange, near the flange tip. When failure initiated in the skin, transverse matrix cracks formed in the surface skin ply closest to the flange and either initiated delaminations or created matrix cracks in the next lower ply, which in turn initiated delaminations. When failure initiated in the flanges, transverse cracks formed in the flange angle ply closest to the skin and initiated delamination. In no configuration did failure propagate through the adhesive bond layer. For the examined skin/flange configurations, the maximum transverse tension stress at failure correlates very well with the transverse tension strength of the composites. Transverse tension strength (static) data of graphite epoxy composites have been shown to vary with the volume of material stressed. As the volume of material stressed increased, the strength decreased. A volumetric scaling law based on Weibull statistics can be used to predict the transverse strength measurements. The volume dependence reflects the presence of inherent flaws in the microstructure of the lamina. A similar approach may be taken to determine a volume scale effect on the transverse tension fatigue behavior of graphite/epoxy composites. The objective of this work is to generate transverse tension strength and fatigue S-N characteristics for composite materials using 3-point flexure tests of 90 deg graphite/epoxy specimens. Investigations will include the volume scale effect as well as frequency and span-to-thickness ratio effects. Prior to the start of the experimental study, an analytical study using finite element modeling will be performed to investigate the span-to-thickness effect. The ratio of transverse flexure stress to shear stress will be monitored and its values predicted by the FEM analysis compared with the value obtained using a 'strength of materials' based approach.

Peck, Ann Nancy W.↗
NASA NTRS1992

Near-wall reconstruction of higher order moments and length scales using the POD

An analysis of the near-wall behavior of the proper orthogonal decomposition (POD) eigenfunctions derived from direct numerical simulation (DNS) of channel flow is performed. Consistent with previous studies, a low order multi-mode reconstruction of the kinetic energy and Reynolds shear stress suffices. A similar reconstruction of the isotropic dissipation rate is shown to be insufficient, however. An analysis is performed of the multi-mode composition of the dissipation rate in the near-wall region, and it is shown that a significant number of higher-order modes are required to achieve the correct asymptotic consistency in the near-wall region. In an attempt to avoid this problem, a length scale definition is proposed in terms of an integration of the correlation tensor which factors in the presence of the wall. The wall is accounted for by only integrating out to 2y(+) and not over the entire domain. Viscous and inviscid estimates for the dissipation were used in the near-wall and core regions respectively, in conjunction with this length scale representation to obtain an estimate of the dissipation throughout the domain. The resulting dissipation exhibits the proper behavior near the wall and in the inertial layer. A 1 POD mode estimate of the length scale is computed and found to agree quite well with the length scale obtained when the entire correlation tensor is used.

Glauser, Mark N.↗
NASA NTRS1975

Satellite attitude prediction by multiple time scales method

An investigation is made of the problem of predicting the attitude of satellites under the influence of external disturbing torques. The attitude dynamics are first expressed in a perturbation formulation which is then solved by the multiple scales approach. The independent variable, time, is extended into new scales, fast, slow, etc., and the integration is carried out separately in the new variables. The theory is applied to two different satellite configurations, rigid body and dual spin, each of which may have an asymmetric mass distribution. The disturbing torques considered are gravity gradient and geomagnetic. Finally, as multiple time scales approach separates slow and fast behaviors of satellite attitude motion, this property is used for the design of an attitude control device. A nutation damping control loop, using the geomagnetic torque for an earth pointing dual spin satellite, is designed in terms of the slow equation.

Tao, Y. C.↗
NASA NTRS1976

Steady incompressible variable thickness shear layer aerodynamics

A shear flow aerodynamic theory for steady incompressible flows is presented for both the lifting and non lifting problems. The slow variation of the boundary layer thickness is considered. The slowly varying behavior is treated by using multitime scales. The analysis begins with the elementary wavy wall problem and, through Fourier superpositions over the wave number space, the shear flow equivalents to the aerodynamic transfer functions of classical potential flow are obtained. The aerodynamic transfer functions provide integral equations which relate the wall pressure and the upwash. Computational results are presented for the pressure distribution, the lift coefficient, and the center of pressure travel along a two dimensional flat plate in a shear flow. The aerodynamic load is decreased by the shear layer, compared to the potential flow. The variable thickness shear layer decreases it less than the uniform thickness shear layer based upon equal maximum shear layer thicknesses.

Chi, M. R.↗
NASA NTRS1979

An energy-balance model of glaciation cycles

A one dimensional energy balance model is presented which contains a time lagged albedo to account for the delayed dependence of continental ice sheets on temperature; it also includes a smoothing of temperature gradients in the tropics to account for the effect of the Hadley circulation on the strong flattening of meridional temperature profiles there. The model exhibits finite amplitude, sustained free oscillations; these oscillations are triggered by a change in the insulation parameter and occur in the absence of any external forcing. This model behavior strongly suggests the possibility of an almost-intransitive mechanism playing a role in glaciation cycles. This behavior also occurs on shorter time scales which might be relevant to the interannual variability of the atmosphere.

Ghil, M.↗
NASA NTRS1981

Dependence of sea-surface microwave emissivity on friction velocity as derived from SMMR/SASS

The sea-surface microwave emissivity is derived using SMMR brightness temperatures and SASS inferred friction velocities for three North Pacific Seasat passes. The results show the emissivity increasing linearly with friction velocity with no obvious break between the foam-free and foam regimes up to a friction velocity of about 70 cm/sec (15 m/sec wind speed). For horizontal polarization the sensitivity of emissivity to friction velocity greatly increases with frequency, while for vertical polarization the sensitivity is much less and is independent of frequency. This behavior is consistent with two-scale scattering theory. A limited amount of high friction velocity data above 70 cm/sec suggests an additional increase in emissivity due to whitecapping.

Wentz, F. J.↗
NASA NTRS1989

Scaling effects in the impact response of graphite-epoxy composite beams

In support of crashworthiness studies on composite airframes and substructure, an experimental and analytical study was conducted to characterize size effects in the large deflection response of scale model graphite-epoxy beams subjected to impact. Scale model beams of 1/2, 2/3, 3/4, 5/6, and full scale were constructed of four different laminate stacking sequences including unidirectional, angle ply, cross ply, and quasi-isotropic. The beam specimens were subjected to eccentric axial impact loads which were scaled to provide homologous beam responses. Comparisons of the load and strain time histories between the scale model beams and the prototype should verify the scale law and demonstrate the use of scale model testing for determining impact behavior of composite structures. The nonlinear structural analysis finite element program DYCAST (DYnamic Crash Analysis of STructures) was used to model the beam response. DYCAST analysis predictions of beam strain response are compared to experimental data and the results are presented.

Jackson, Karen E.↗
NASA NTRS1992

Stratocumulus cloud properties derived from simultaneous satellite and island-based instrumentation during FIRE

Cloud parameters derived from visible and infrared window data from the Geostationary Operational Environmental Satellite (GOES) are compared to corresponding properties determined from instrumentation on San Nicolas Island off the coast of California during the First ISCCP Regional Experiment marine stratocumulus intensive field observations period in July 1987. Examination of the satellite imagery revealed that the apparent bias can be explained by the persistence of the clouds over the northwest part of the island during periods of clearing around the island. Diurnal variations in the cloud cover were very significant; minimum cloudiness occurred during the late afternoon and maximum cloudiness early in the morning. Relationships were established between the satellite-derived cloud optical depth and two surface-observed quantities: cloud liquid water path and cloud thickness. Simultaneous observations of liquid water path and satellite-derived cloud optical depth were used to infer effective cloud-droplet radius, resulting in good agreement with correlative data. The diurnal variations in cloud amount are accompanied by changes in cloud thickness, cloud-top height, cloud liquid water path, and effective droplet size. These observations provide the most complete picture, to date, of the diurnal cycle of marine stratocumulus clouds, confirming previous satellite-based inferences of the diurnal behavior of marine stratocumulus at larger scales.

Minnis, Patrick↗
NASA NTRS1992

Non-parallel effects in the instability of Long's vortex

Asymptotic results obtained by Foster and Smith (1989) for inviscid instability modes of the Type-II Long's vortex is extended to account for the effects of finite Reynolds number. It is shown that the nonparallelism of the flow is more important than the viscous terms in determining the finite-Re behavior due to the radial velocity scales with Re exp -1 M. A critical layer of the three-layer structrue of the parallel-flow instability modes is considerably modified by radial velocity. It is found that for azimuthal wavenumber n greater than 1, the nonparallelism stabilizes the unstable inertial modes, leading to determination of neutral curves. For n less than -1, the nonparallel effects always destabilize the vortex to these helical modes.

Foster, M. R.↗