Search NASA⌕ Search

SEARCH · Search NASA

Results for “Science Missions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Small Satellite-sized Hypersonic Inflatable Aerodynamic Decelerators for Interplanetary Science Missions

To make the most of ridesharing opportunities, small satellite (SmallSat) mission designers endeavor to pack as much payload into a SmallSat-class form factor as possible. The mass and volume constraints of this smaller vehicle class present a challenge for interplanetary mission sets that require a means of achieving orbit insertion at their destination of interest. For a fully propulsive orbit insertion design, this may translate to the propellant mass being a significant fraction of the overall vehicle mass and prolonged insertion time. Aerocapture is a single quick maneuver that can significantly reduce the required propellant mass for orbit insertion. Because aerocapture uses a planet’s atmosphere to achieve the necessary change in velocity, a protective aeroshell is needed. The constraints imposed on secondary payloads render traditional rigid aeroshells mass and space prohibitive for the SmallSat class of vehicles; thus, warranting consideration of deployable designs that can be stowed compactly until needed for atmospheric entry. The Hypersonic Inflatable Aerodynamic Decelerator (HIAD) is a deployable aeroshell that leverages inflatable toroids to achieve the large drag area needed for aerodynamic deceleration. While the technology is currently being analyzed for Mars human-scale missions, it has the potential applicability for interplanetary SmallSat-scale missions as well. This paper highlights a study conducted during an internship at NASA Langley Research Center to investigate the feasibility of using a scaled-down HIAD design in SmallSat aerocapture missions. Several scaling methodologies are investigated including use of parametric models and direct computer-aided design (CAD) model scaling. Candidate HIAD configurations that conform to secondary payload adapter requirements are identified. The Program to Optimize Simulated Trajectories II (POST2) is utilized to conduct orbit insertion performance and trajectory sensitivity studies using the candidate configurations at Earth, Venus, and Mars. The results of the study indicate that multiple SmallSat-sized HIAD designs, targeting a range of SmallSat payload classes, are feasible for planetary aerocapture missions to Mars and Venus as well as Earth-based aerocapture missions.

Shelly C. Mann↗
NASA NTRSDate not supplied

Conformal PICA TPS– Enabling Future Nasa Planetary Science Missions

Initial development of Conformal Phenolic Impregnated Carbon Ablator (C-PICA) ablative TPS occurred under NASA’s Hypersonics Project in the 2000’s and demonstrated very low through-the-thickness thermal conductivity compared to state-of-the-art Phenolic Impregnated Carbon Ablator (PICA). PICA, which was first demonstrated on Stardust, has some inherent limitations that C-PICA improves on, primarily strain to failure. More recently C-PICA has been further matured and a family of C-PICA materials are now ready for consideration as an enabling technology for New Frontiers and other NASA missions. C-PICA has several improvements compared to PICA including: - Higher strain to failure and lower thermal conductivity (up to 55% less than PICA depending on C-PICA variant) - CTE comparable to typical composite carrier structures and also suitable for metallic substructures given high strain to failure - Temperature independent mechanical properties - Suited for single piece (up to ~ 1.5m) or tiled configurations - Larger tiles leading to reduced integration complexity compared to tiled PICA - Reduced mass compared to PICA due to reduced thermal conductivity C-PICA has been tested at heat fluxes ranging from 250-1850 W/cm^2, and shear pressures of 200Pa at 400W/cm^2 with excellent performance. Expertise on manufacturing and integration of C-PICA reside at NASA, and NASA can transition the technology to interested parties via technology transfer.

thermal protection↗
NASA NTRSDate not supplied

Conformal PICA TPS– Enabling Future Nasa Planetary Science Missions

Initial development of conformal PICA (C-PICA) ablative TPS occurred under NASA’s Hypersonics Project in the 2000’s and demonstrated very low through the thickness conductivity compared to state-of-the-art PICA. PICA, which was first demonstrated on Stardust, has some inherent limitations that C-PICA improves on, primarily strain to failure. More recently C-PICA has been further matured and a family of C-PICA materials are now ready for consideration as an enabling technology for New Frontiers and other NASA missions. C-PICA has several improvements compared to PICA including: - Higher strain to failure and lower thermal conductivity (up to 55% less than PICA depending on C-PICA variant) - CTE comparable to typical composite carrier structures - Temperature independent mechanical properties - Suited for single piece (up to ~ 1.5m) or tiled configurations - Larger tiles leading to reduced integration complexity compared to tiled PICA - Reduced mass compared to PICA due to reduced thermal conductivity C-PICA has been tested at heating fluxes ranging from 250-1850 W/cm2 with excellent performance. Based on our evaluation, multiple missions listed on the SMD Technology Showcase will potentially need a thermal protection system capable of withstanding entry environments where C-PICA is suited either as a forebody or backshell TPS. We will be highlighting mature conformal PICA variants to support the following missions at the showcase in January 2023.

thermal protection↗
NASA NTRSDate not supplied

Composite Technologies for Science Missions

ASTROLAB, Lunar Geophysical Network, Mars Icebreaker and Mars PLACER Net missions propose use of various types of vehicles – such as rovers, landers and flying probes - to accomplish their scientific objectives. Although designs for such vehicles are myriad, many structural components can be made using composite manufacturing technologies. Composite materials are also myriad, by nature, but carbon fiber reinforced polymers (CFRP) in particular are sought after for their high specific strength and specific stiffness. CFRP components could be especially beneficial in vehicle designs for Moon or Mars missions due to their nearly negligible coefficient of thermal expansion (CTE). CTE is a critical design characteristics in environments where significant thermal swings are prevalent, such as those of atmosphere-less Moon and Mars.MSFC/EM42 houses several relevant composites technologies. Strong and rigid struts can be filament-wound. Shells and platforms can be laid-up using automated fiber placement (for repeatability) or by hand (for small features). Monolithic structures can even be designed to reduce part count and therefore reduce the risk of joint failures. Composites are also tailorable, allowing the incorporation of different material types or formats through the thickness of a part. This includes materials which shield from radiation or electrostatic discharge. Finally, the rigidity of composite parts minimizes overall vibration and compliance within a design.Additionally, missions such as Triton Ocean World Surveyor anticipate use of traditional, metallic fuel tanks. Composite overwrapped pressure vessels (COPVs) are suitable for use in this application as well. The Triton mission even cites a concern for heat retention, for which CFRP also offers improved characteristics over traditional metallic tanks.

Lightweight↗