Search NASA⌕ Search

SEARCH · Search NASA

Results for “Selectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Selective carboxylation of alkenes with CO 2 to form unsaturated carboxylic acid on Sc-exchanged MFI zeolite

Utilization of CO 2 in chemical synthesis as C1 carbon feedstock to introduce a carboxylic group into alkene is valuable for producing unsaturated carboxylic acids. Selective carboxylation of alkenes at targeted positions can be used to regulate the production of such specific unsaturated carboxylic acids or functionalize hydrocarbon plastics that possess residual C=C double bonds. In this study, we investigated the carboxylation of 1-butene and 2-butene (as representative alkene) with CO 2 on Sc-exchanged MFI zeolites using density functional theory calculations. Here, we find that similar to ethylene, the carboxylation of butene is also rate-limited by the β–H transfer. We examined carboxylation at the C1 and C2 positions of 1-butene and cis and trans isomers for 2-butene. Based on activation barriers of the β–H transfer, our results demonstrate that Sc-MFI zeolite preferably carboxylates at the terminal position of butene. In the case of 2-butene, carboxylation of the trans isomer is more favorable than the cis isomer. Furthermore, We show that the energy of degenerate orbitals of C, O and H atoms (involved in the β–H transfer) in the metallalactone ring regulates the activation energy of the β–H transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Selective leaching and solvent extraction of Lithium from spent batteries

Pre-extracting Li from spent lithium-ion batteries (LIBs) is crucial because the recovery efficiency of Li is low after other critical metals have been extracted. Traditional methods involving black mass roasting followed by water leaching have resulted in the extraction of 76 % Li and 61 % Al. However, pre-leaching Li from pretreated black mass using an oxalic acid solution at both ambient and elevated temperatures significantly improved results, achieving 98.1 % Li, 99.5 % Al, and 100 % Fe extraction while leaving Ni, Co, Mn, and Cu behind under optimal conditions. Oxalic acid crystals were recovered by refrigerating the leach solution at temperatures below 5 °C and were reused with nearly identical leaching efficiency. Selective extraction of Li from the oxalate leach solution was achieved using Cyanex® 936P under optimal conditions. Here, due to its extremely low Li extraction efficiency, Dichloromethane proved unsuitable as a diluent. Comparative extraction tests using Cyanex® 936P, Cyanex® 272, and DEHPA in kerosene demonstrated that Cyanex® 936P is an excellent extractant for Li, effectively separating it from other impurities. Under optimal conditions, 98.8 % of available Li was extracted using 20 % Cyanex® 936P, compared to 51.1 % with Cyanex® 272 and 39.9 % with DEHPA in kerosene. Additionally, stripping Li from Cyanex® 936P using H 2 SO 4 and HCl was explored, with HCl yielding the best performance.

Black mass↗
DOE OSTI2024

Structural Asymmetry and Chiral-Induced Spin Selectivity in Chiral Palladium-Halide Semiconductors

Chiral Pb-free metal-halide semiconductors (MHSs) have attracted considerable attention in the field of spintronics due to various interesting spin-related properties and chiral-induced spin selectivity (CISS) effect. Despite their excellent chemical and structural tunability, the material scope and crystal structure of Pb-free chiral MHSs exhibiting the CISS effect are still limited; chiral MHSs that have metal-halide structures of octahedra and tetrahedra are only reported. Here, we report a new class of chiral MHSs, of which palladium (Pd)-halides are formed in 1D square-pyramidal structures or 0D square-planar structures, with a general formula of ((R/S-MBA) 2 PdBr 4 ) 1-x ((R/S-MBA) 2 PdCl 4 ) x (MBA = methylbenzylammonium; x = 0, 0.25, 0.5, 0.75, and 1) for the first time. The crystals adopt the 1D helical chain of Pd-halide square-pyramid (for x = 0, 0.25, 0.5, and 0.75) and 0D structure of Pd-halide square-plane (for x = 1). All the Pd-halides are distorted by the interaction between the halide and the chiral organic ammonium and arranged in a noncentrosymmetric position. Circular dichroism (CD) for ((R/S-MBA) 2 PdBr 4 ) 1-x ((R/S-MBA) 2 PdCl 4 ) x indicates that chirality was transferred from chiral organic ammonium to Pd-halide inorganics. ((R-MBA) 2 PdBr 4 ) 1-x ((R-MBA) 2 PdCl 4 ) x (x = 0, 0.25, 0.5, and 0.75) shows a distortion index of 0.127-0.128, which is the highest value among the previously reported chiral MHSs to the best of our knowledge. We also find that (R/S-MBA) 2 Pd(Br 1-x Cl x ) 4 crystals grow along the out-of-plane direction during spin coating and have high c-axis orientation and crystallinity, and (R/S-MBA) 2 Pd(Br 1-x Cl x ) 4 (x = 0 and 0.5) crystals exhibit a CISS effect in polycrystalline bulk films. In conclusion, these results demonstrate the possibility of a new metal-halide series with square-planar structures or square-pyramidal structures for future spintronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sustained, Selective, and Efficient Photochemical CO 2 Reduction to Formate by Electron-Deficient Ruthenium Polypyridyl Complexes

Metal-hydrides play a significant role in a variety of reactions, including chemical, electrochemical, and pho-tochemical CO 2 reduction. Molecular metal-hydrides have the distinct advantage of allowing tunability of their hydricities by rational ligand modifications, with more electron-rich metal-hydrides being in general more hydridic. We report here a new approach to generate highly hydridic metal hydrides of the type [Ru(tpy)(LL)(H)] n+ by introducing electron-withdrawing substituents in the backbone of the bidentate LL ligand. This strategy enables the generation of the metal hydride, [Ru(tpy)(LL)(H)] + , at mild negative potentials and further one electron reduction to the more hydridic [Ru(tpy)(LL)(H)] 0 at a potential window that is redox silent for the more electron-rich metal hydride analogue [Ru(tpy)(bpy)(H)] + . In addition, for-mate release takes place from the hydride transfer adducts [Ru---HCOO)(tpy)(LL)] 0 rather than from the corresponding formato complexes, [Ru(tpy)(LL)(OCHO)] 0 , which would require further reduction to [Ru(tpy)(LL)(OCHO)]ˉ as demonstrated by IR-spectroelectrochemistry. The parent [Ru(tpy)(LL)(CH 3 CN)] n+ solvento complexes were then tested as catalysts for the reduction of CO 2 to formate in a 4-component homogenenous photochemical approach driven by a Ru(II) sensitizer. The re-sults showed selective (> 88%) formate production with record turnover number of ~50,000 and record turnover frequency of 4.4 s -1 when compared to other molecular catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhancing Selective Hydrofluorocarbon Greenhouse Gas Capture via Halogenation of Metal–Organic Frameworks

Hydrofluorocarbons (HFCs) are anthropogenically produced greenhouse gases with longer atmospheric lifetimes and higher global warming potentials than those of carbon dioxide. General strategies to abate their emissions from industrial point sources, such as via adsorptive capture, remain scarce. Herein, we uncover the key structure–property relationships that lead to strong binding of HFCs such as fluoroform (CHF 3 ) and difluoromethane (CH 2 F 2 ) in metal–organic frameworks (MOFs) under the low pressures relevant to flue gas scrubbing. Extensive gas sorption and computational studies support that the Zr-based microporous framework MOF-801-Br or HHU-2-Br (HHU = Heinrich-Heine-University Düsseldorf) strongly binds HFCs due to its synergistic combination of Zr-OH sites on the nodes and bromine sites on the linkers. As such, MOF-801-Br demonstrates a record-setting performance for separating CHF 3 from N 2 under dilute conditions. Our work highlights that the combination of multiple hydrogen-bonding sites in microporous MOFs represents a generalizable strategy for HFC capture, enabling their selective removal from industrial waste streams.

adsorption↗
DOE OSTI2026

Solution and Active Site Speciation Drive Selectivity for Electrocatalytic Reactive Carbon Capture in Diethanolamine over Ni–N–C Catalysts

Direct conversion of captured forms of carbon, or reactive carbon capture (RCC), presents an opportunity to reduce the energy intensity and cost of direct CO 2 utilization from dilute sources. While amine-based sorbents effectively capture CO 2 , their use for RCC presents numerous challenges with typical pure metal catalysts used for electrochemical CO 2 reduction (CO 2 R). Here, using both theory and experiments, we find that Ni–N–C single atom catalysts are effective for RCC conversion to CO using a diethanolamine sorbent, in contrast to pure metal catalysts. Computational analysis reveals that RCC can proceed directly through direct reduction of the sorbent-CO 2 adduct or indirectly by C–N bond breaking facilitating CO 2 adsorption and subsequent reduction. We find that the latter mechanism is most prevalent at low overpotentials where we experimentally observe RCC selectivity. We also find experimentally that the rate of CO production for RCC with Ni–N–C catalysts can exceed pure bicarbonate solutions at intermediate sorbent concentration (0.1–0.5 M DEA) under dilute (10–25%) streams of CO 2 at low overpotentials. The coordination environment of Ni sites and the solution speciation influence their RCC activity, with changes in protonation to coordinating N/C atoms resulting in changing the RCC mechanism and consequent activity. In situ X-ray absorption spectroscopy and computational analysis reveal restructuring under RCC conditions due to hydrogen coadsorption with DEA that limits the stability of Ni–N–C catalysts. This work highlights the importance of carefully controlling the catalyst and solution environment to achieve active and stable RCC electrocatalysis.

Chemistry↗
DOE OSTI2024

Investigating Mountain Watershed Headwater‐To‐Groundwater Connections, Water Sources, and Storage Selection Behavior With Dynamic‐Flux Particle Tracking

Abstract Climate change will impact mountain watershed streamflow both directly—with changing precipitation amounts and variability—and indirectly—through temperature shifts altering snowpack, melt, and evapotranspiration. To understand how these complex processes will affect ecosystem functioning and water resources, we need tools to distinguish connections between water sources (rain/snowmelt), groundwater storage, and exit fluxes (streamflow/evapotranspiration), and to determine how these connections change seasonally and as climate shifts. Here, we develop novel watershed‐scale approaches to understand water source, storage, and exit flux connections using a dynamic‐flux particle tracking model (EcoSLIM) applied in California's Cosumnes Watershed, which connects the Sierra Nevada and Central Valley. This work develops new visualizations and applications to provide mechanistic understanding that underpins the interpretation of isotopic field data at watershed scales to distinguish sources, flow paths, residence times, and storage selection. In our simulations, streamflow comes primarily from snow‐derived water while evapotranspiration generally comes from rain. Most streamflow starts above 1,000 m while evapotranspiration is sourced relatively evenly across the watershed and is generally younger than streamflow. Modeled streamflow consists primarily of water sourced from precipitation in the previous 5 years but before the current water year, while ET consists primarily of water from precipitation in the current water year. ET, and to a lesser extent streamflow, are both younger than water in groundwater storage. However, snowmelt‐derived streamflow preferentially discharges older water from snow‐derived storage. Dynamic‐flux particle tracking and new approaches presented here enable novel model‐tracer comparisons in large‐scale watersheds to better understand watershed behavior in a changing climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

A chemical perspective on the chiral induced spin selectivity effect

ABSTRACT This review discusses opportunities in chemistry that are enabled by the chiral induced spin selectivity (CISS) effect. First, the review begins with a brief overview of the seminal studies on CISS. Next, we discuss different chiral material systems whose properties can be tailored through chemical means, with a special emphasis on hybrid organic-inorganic layered materials that exhibit some of the largest spin filtering properties to date. Then, we discuss the promise of CISS for chemical reactions and enantioseparation before concluding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Spatial Mapping of Chiral-Induced Spin Selectivity in Chiral Perovskite via Spin-Schottky Junction

Chiral halide perovskite (c-HP) semiconductors exhibit on average a large chiral-induced spin selectivity (CISS) effect. Nevertheless, the microscopic details of CISS and its integration in opto-spintronic constructs remain nascent. Reliable reporting of CISS performance characteristics represents a significant challenge in providing the necessary design rules. We show a Kelvin probe force microscopy (KPFM) method that can quantitatively evaluate and spatially map the chirality-dependent surface contact potential difference resulting from the formation of a spin-Schottky junction. We revealed inhomogeneity in the CISS response, where low-CISS regions in the c-HP films reduce the overall macroscopic average, likely serving as a key factor in optimizing macroscopic performance. We also observed that although c-HP films made from higher precursor concentrations lead to thicker films and higher carrier concentrations with subsequent larger barrier heights in the Schottky junction, stronger spin relaxation due to non-ideal film quality reduces spin polarization.

14 SOLAR ENERGY↗
DOE OSTI2024

Selective laser sintering and spark plasma sintering of (Zr,Nb,Ta,Ti,W)C compositionally complex carbide ceramics

Abstract Two advanced manufacturing processes, spark plasma sintering (SPS) and selective laser sintering (SLS), have been developed for synthesis of (Zr,Nb,Ta,Ti,W)C compositionally complex carbide (CCC) via reactive sintering of a powder mixture of constitute monocarbides. X‐ray diffraction analysis confirmed that the single‐phase CCC can be formed by both SPS and SLS. While a homogenous microstructure with uniform metal element distributions was developed during SPS, three‐layer microstructures with a thin TiC‐rich layer and two TaC‐rich layers along with a TiO 2 ‐rich surface layer containing W nanoparticles were formed during SLS. In addition, cellular structures with W, Zr, and Ti element segregation and dislocations on cell boundaries were observed in the SLS‐CCC sample, indicating the effect of nonequilibrium conditions on microstructure formation during laser melting followed by rapid cooling and solidification process. Compared to the SPS‐CCC sample, the SLS‐CCC showed enhanced hardness and reduced thermal conductivity, which may be related to their unique cellular structures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Advancements in Constitutive Model Calibration: Leveraging the Power of Full‐Field DIC Measurements and In Situ Load Path Selection for Reliable Parameter Inference

Accurate material characterization and model calibration are essential for computationally supported high-consequence engineering decisions. Historically, characterization and calibration methods (1) use simplified test specimen geometries and global data, (2) cannot guarantee that sufficient characterization data are collected for a specific model of interest, (3) use deterministic methods that provide best-fit parameter values with no uncertainty quantification, and (4) are sequential, inflexible, and time-consuming. This work brings together several recent advancements into an improved workflow called interlaced characterization and calibration (ICC) that advances the state-of-the-art in constitutive model calibration. The ICC paradigm (1) employs tools to efficiently use full-field data to calibrate high-fidelity material models, (2) aligns the data needed with the data collected by adopting an optimal experimental design protocol, (3) quantifies parameter uncertainty through Bayesian inference and (4) incorporates these advancements into a quasi real-time feedback loop. The ICC framework is demonstrated here on the calibration of a material model using simulated full-field data for an aluminium cruciform specimen being deformed biaxially. The cruciform is actively driven through the myopically preferred load path using Bayesian optimal experimental design, which selects load steps that yield the maximum expected information gain (EIG). Principal component analysis (PCA) is performed on the model predictions of full-field displacements, and fast surrogate models are built to approximate the input-output relationships of the expensive finite element model. Furthermore, the tools developed and demonstrated here show that high-fidelity constitutive models can be efficiently and reliably calibrated with quantified uncertainty, thus supporting credible decision-making and potentially increasing the agility of solid mechanics modelling by enabling utilization of computational simulations at earlier stages of the design cycle.

Bayesian optimal experimental design↗
DOE OSTI2026

$\mathscr{PT}$ symmetry enforced twin exchange as the origin of chirality-induced spin selectivity

Chiral molecules, ubiquitous in chemistry and biology, can differentiate electrons by their spin, a phenomenon known as chirality-induced spin selectivity (CISS). Despite its robustness and technological relevance, CISS has resisted conventional explanation: Spin-orbit coupling (SOC) models cannot fully account for the observed magnitude, room-temperature persistence, or equilibrium signatures. Here, we argue that structural chirality enforces a twin-pair exchange mechanism via the indistinguishability principle, which intrinsically couples spin and spatial degrees of freedom such that wave functions cannot be factorized into spin and spatial components. We derive an effective Hamiltonian that describes both transport and equilibrium CISS phenomena and is non-Hermitian. However, the inherent pseudo-Hermiticity, with $\mathscr{PT}$ symmetry as a special case, ensures real eigenvalues and thermodynamic consistency. We demonstrate that our framework is a step toward resolving long-standing anomalies of CISS. It situates CISS alongside equilibrium symmetry-breaking phenomena such as ferromagnetism and superconductivity, with implications for spintronics, catalysis, and the origins of biological homochirality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ultrafast Inverse Chirality-Induced Spin Selectivity Observed by THz Emission

Chirality-induced spin selectivity (CISS) phenomena arise from an interplay among structural chirality, electron spin orientation, and charge current. Steady-state observations such as magnetoresistance offer little insight into the timescales that govern the spin-charge interconversion and often conflate interfacial and bulk phenomena. By contrast, inverse CISS involves the conversion of spin to a charge current. Using terahertz (THz) emission spectroscopy, we directly measured an ultrafast charge current due to inverse CISS with picosecond time resolution. Polarity and polarization analysis of the THz emission map the induced charge current direction upon spin injection. We found that a charge current is generated along the spin orientation that changes direction with stereochemical configuration. These observations directly demonstrate the inherent coupling between spin and charge currents in chiral systems, offering key insights into their fundamental dynamics.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Chirality-Induced Spin Selectivity in Hybrid Organic-Inorganic Perovskite Semiconductors

The movement of charges through a chiral medium results in a spin-polarized charge current. This phenomenon, known as the chirality-induced spin selectivity (CISS) effect, enables control over spin populations without the need for magnetic components and operates at room temperature. CISS has been discovered in a range of chiral media and most prominently studied in chiral organic molecular species. Chiral hybrid organic-inorganic perovskite semiconductors combine the unique and functional aspects of inorganic semiconductors with chiral molecules. The inorganic component borrows the homochirality of the organic component to yield a unique family of highly tunable chiral semiconductors, where the enantiomeric purity is defined by the organic component. Semiconductors already form the backbone of modern-day technologies. Adding chirality and control over spin through CISS provides new avenues for creative technological development. This review is intended to be an introduction to these unique systems and the demonstrations of CISS and spin control.

14 SOLAR ENERGY↗
DOE OSTI2026

Development of Composite Photocatalyst Materials that are Highly Selective for Solar Hydrogen Production and their Evaluation in Z-Scheme Reactor Designs

The key technology gap preventing a vertically stacked dual-bed particle suspension reactor from achieving the DOE MYRD&D ultimate cost target for H 2 production remains the lack of materials in particle form factor that exhibit ≥10% solar-to-H 2 energy conversion (STH) efficiency as a suspension. Therefore, our project goals centered around strategies to increase the STH efficiency by enhancing photophysical properties of perovskite oxide particles including increased visible-light absorption, increased selectivity for electrocatalysis of the H 2 evolution reaction (HER) and the O 2 evolution reaction (OER) through development of ultrathin oxide coatings, correlating composition and structure to function, and improving understanding of multiscale transport and kinetic processes.

08 HYDROGEN↗
DOE OSTI2024

Propulsion Electrification Architecture Selection Process and Cost of Carbon Abatement Analysis for Heavy-Duty Off-Road Material Handler

The heavy-duty off-road industry continues to expand efforts to reduce fuel consumption and CO 2 e (carbon dioxide equivalent) emissions. Many manufacturers are pursuing electrification to decrease fuel consumption and emissions. Future policies will likely require electrification for CO2e savings, as seen in light-duty on-road vehicles. Electrified architectures vary widely in the heavy-duty off-road space, with parallel hybrids in some applications and series hybrids in others. The diverse applications for different types of equipment mean different electrified configurations are required. Companies must also determine the value in pursuing electrified architectures; this work analyzes a range of electrified architectures, from micro hybrids to parallel hybrids to series hybrids to a BEV, looking at the total cost, total CO 2 e, and cost per CO 2 e (cost of carbon abatement, or cost of carbon reduction) using data for the year 2021. This study is focused on a heavy-duty off-road material handler, the Pettibone Cary-Lift 204i. This machine’s specialty application, including events like unloading large oil pipes from a railcar, requires a unique electrified architecture that suits its specific needs. However, the results from this study may be extrapolated to similar machinery to inform fuel savings options across the heavy-duty off-road industry. In this study, a unique electrified architecture is determined for the Cary-Lift. This architecture is informed by multiple rounds of a Pugh matrix decision analysis to select a shortened list of desirable electrified architectures. The shortened list is modeled and simulated to determine CO 2 e, cost, and cost per CO 2 e. A final architecture is determined as a plug-in series hybrid that reduces fuel consumption by 65%, targeting the large fuel and CO 2 e savings that are likely to be required for the future of the heavy-duty off-road industry.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Revisiting the Impact of Anion Selection on Sulfur Redox Reaction Kinetics for High Sulfur Loading Lithium–Sulfur Batteries

Lithium bis(trifluoromethane)sulfonimide (LiTFSI) is widely used in lithium–sulfur (Li–S) battery electrolytes due to its stability with lithium polysulfides (LiPSs) and moderate compatibility with lithium metal anodes. However, LiTFSI presents environmental concerns due to its association with per- and polyfluoroalkyl substances (PFAS), which are environmentally persistent and potentially toxic, raises sustainability concerns. This research also reveals that LiTFSI limits sulfur redox reactions (SRRs), making it less effective than other lithium salts. Additionally, some salts previously considered incompatible with Li-S systems due to their reactivity with LiPSs are demonstrated to perform effectively. For the first time, a protective, porous cathode electrolyte interphase (CEI) formed in situ through reactions between salt anions and LiPS is reported. The cells delivered a high specific capacity of 1230.8 mAh g −1 at 0.05 C with a sulfur loading of ≈6 mg cm −2 , limited lithium anode, maintaining a capacity retention of 76.2% after 100 cycles at 0.1 C. Under harsh conditions, such as high sulfur loading, lean electrolyte conditions (3 µL mg −1 ), and in anode-free cells, the cells continued to deliver outstanding capacity. This work provides valuable guidelines for understanding and selecting lithium salts to advance electrolyte design for Li–S batteries.

high loading batteries↗