Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shock capturing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Hot gas in the cold dark matter scenario: X-ray clusters from a high-resolution numerical simulation

A new, three-dimensional, shock-capturing hydrodynamic code is utilized to determine the distribution of hot gas in a standard cold dark matter (CDM) model of the universe. Periodic boundary conditions are assumed: a box with size 85 h(exp -1) Mpc having cell size 0.31 h(exp -1) Mpc is followed in a simulation with 270(exp 3) = 10(exp 7.3) cells. Adopting standard parameters determined from COBE and light-element nucleosynthesis, sigma(sub 8) = 1.05, omega(sub b) = 0.06, and assuming h = 0.5, we find the X-ray-emitting clusters and compute the luminosity function at several wavelengths, the temperature distribution, and estimated sizes, as well as the evolution of these quantities with redshift. We find that most of the total X-ray emissivity in our box originates in a relatively small number of identifiable clusters which occupy approximately 10(exp -3) of the box volume. This standard CDM model, normalized to COBE, produces approximately 5 times too much emission from clusters having L(sub x) is greater than 10(exp 43) ergs/s, a not-unexpected result. If all other parameters were unchanged, we would expect adequate agreement for sigma(sub 8) = 0.6. This provides a new and independent argument for lower small-scale power than standard CDM at the 8 h(exp -1) Mpc scale. The background radiation field at 1 keV due to clusters in this model is approximately one-third of the observed background, which, after correction for numerical effects, again indicates approximately 5 times too much emission and the appropriateness of sigma(sub 8) = 0.6. If we have used the observed ratio of gas to total mass in clusters, rather than basing the mean density on light-element nucleosynthesis, then the computed luminosity of each cluster would have increased still further, by a factor of approximately 10. The number density of clusters increases to z approximately 1, but the luminosity per typical cluster decreases, with the result that evolution in the number density of bright clusters is moderate in this redshift range, showing a broad peak near z = 0.7, and then a rapid decline above redshift z = 3. Detailed computations of the luminosity functions in the range L(sub x) = 10(exp 40) - 10(exp 44) ergs/s in various energy bands are presented for both cluster central regions and total luminosities to be used in comparison with ROSAT and other observational data sets. The quantitative results found disagree significantly with those found by other investigators using semianalytic techniques. We find little dependence of core radius on cluster luminosity and a dependence of temperature on luminosity given by log kT(sub x) = A + B log L(sub x), which is slightly steeper (B = 0.38) than is indicated by observations. Computed temperatures are somewhat higher than observed, as expected, in that COBE-normalized CDM has too much power on the relevant scales. A modest average temperature gradient is found, with temperatures dropping to 90% of central values at 0.4 h(exp -1) Mpc and 70% of central values at 0.9 h(exp -1) Mpc. Examining the ratio of gas to total mass in the clusters normalized to Omega(sub B) h(exp 2) = 0.015, and comparing with observations, we conclude, in agreement with White (1991), that the cluster observations argue for an open universe.

Kang, Hyesung↗
NASA NTRS1993

Issues in the application of high order schemes

We argue that the type of simulations to be carried out in the next decade will entail the use of high order schemes. A discussion of some issues in the application of those schemes to time dependent problems are discussed. In particular we will review spectral shock capturing techniques and the asymptotic behavior of high order compact schemes.

Gottlieb, David↗
NASA NTRS1992

An extended Lagrangian method for subsonic flows

It is well known that fluid motion can be specified by either the Eulerian of Lagrangian description. Most of Computational Fluid Dynamics (CFD) developments over the last three decades have been based on the Eulerian description and considerable progress has been made. In particular, the upwind methods, inspired and guided by the work of Gudonov, have met with many successes in dealing with complex flows, especially where discontinuities exist. However, this shock capturing property has proven to be accurate only when the discontinuity is aligned with one of the grid lines since most upwind methods are strictly formulated in 1-D framework and only formally extended to multi-dimensions. Consequently, the attractive property of crisp resolution of these discontinuities is lost and research on genuine multi-dimensional approach has just been undertaken by several leading researchers. Nevertheless they are still based on the Eulerian description.

Liou, Meng-Sing↗
NASA NTRS1997

RIACS

Topics considered include: high-performance computing; cognitive and perceptual prostheses (computational aids designed to leverage human abilities); autonomous systems. Also included: development of a 3D unstructured grid code based on a finite volume formulation and applied to the Navier-stokes equations; Cartesian grid methods for complex geometry; multigrid methods for solving elliptic problems on unstructured grids; algebraic non-overlapping domain decomposition methods for compressible fluid flow problems on unstructured meshes; numerical methods for the compressible navier-stokes equations with application to aerodynamic flows; research in aerodynamic shape optimization; S-HARP: a parallel dynamic spectral partitioner; numerical schemes for the Hamilton-Jacobi and level set equations on triangulated domains; application of high-order shock capturing schemes to direct simulation of turbulence; multicast technology; network testbeds; supercomputer consolidation project.

Oliger, Joseph↗
NASA NTRS1999

Factorizable Schemes for the Equations of Fluid Flow

We present an upwind high-resolution factorizable (UHF) discrete scheme for the compressible Euler equations that allows to distinguish between full-potential and advection factors at the discrete level. The scheme approximates equations in their general conservative form and is related to the family of genuinely multidimensional upwind schemes developed previously and demonstrated to have good shock-capturing capabilities. A unique property of this scheme is that in addition to the aforementioned features it is also factorizable, i.e., it allows to distinguish between full-potential and advection factors at the discrete level. The latter property facilitates the construction of optimally efficient multigrid solvers. This is done through a relaxation procedure that utilizes the factorizability property.

Sidilkover, David↗
NASA NTRS1999

Unified CFD Methods Via Flowfield-Dependent Variation Theory

This paper addresses the flowfield-dependent variation (FDV) methods in which complex physical phenomena are taken into account in the final form of partial differential equations to be solved so that finite difference methods (FDM) or finite element methods (FEM) themselves will not dictate the physics, but rather are no more than simply the options how to discretize between adjacent nodal points or within an element. The variation parameters introduced in the formulation are calculated from the current flowfield based on changes of Mach numbers, Reynolds numbers, Peclet numbers, and Damkohler numbers between adjacent nodal points, which play many significant roles such as adjusting the governing equations (hyperbolic, parabolic, and/or e!liptic), resolving various physical phenomena, and controlling the accuracy and stability of the numerical solution. The theory is verified by a number of example problems addressing the physical implications of the variation parameters which resemble the flowfield itself, shock capturing mechanism, transitions and interactions between inviscid/viscous, compressibility/incompressibility, and laminar/turbulent flows.

Chung, T. J.↗
NASA NTRS2001

Ten Years in the Making: AUSM-Family

We begin by describing the motivations that gave birth to the original AUSM scheme and then focus on the ingredients that has spurred its growth and acceptance by the world of computational fluid dynamics. As it has played out more in the field, weaknesses have also surfaced. Hence, nutrients and supplements are prescribed to help it grow and stay strong and robust. In this paper, we will describe the saga of efforts owing to researchers who have contributed to building up the AUSM-family for the CFD community. It is hoped that a healthy scheme will contribute to the accurate and robust solution of problems encountered in a wide range of disciplines. We analyze numerical mass fluxes with an emphasis on their capability for accurately capturing shock and contact discontinuities. We will present a new scheme for the pressure flux, along with results for a host of test problems.

Liou, Meng-Sing↗
NASA NTRS2001

Application of OVERFLOW to Hypersonic Perfect Gas Flowfields

A validation of the matrix dissipation option in OVERFLOW was completed, and a single set of constants was found which yield good inviscid shock capturing, viscous heat and skin friction predictions, and work over a wide Mach and Reynolds number range. This scheme works well with multigrid, and produces fast convergence to steady state for 2 and 3 dimensional problems, with accuracy comparable to Roe upwinding, and without 'carbuncle' problems for the blunt body flowfields.

Olsen, M. E.↗
NASA NTRS1998

Dynamic Load Balancing for Adaptive Unstructured Grids

Dynamic mesh adaptation on unstructured grids is a powerful tool for computing unsteady three-dimensional problems that require grid modifications to efficiently resolve solution features. By locally refining and coarsening the mesh to capture phenomena of interest, such procedures make standard computational methods more cost effective. Highly refined meshes are required to accurately capture shock waves, contact discontinuities, vortices, and shear layers in fluid flow problems. Adaptive meshes have also proved to be useful in several other areas of computational science and engineering like computer vision and graphics, semiconductor device modeling, and structural mechanics. Local mesh adaptation provides the opportunity to obtain solutions that are comparable to those obtained on globally-refined grids but at a much lower cost. Additional information is contained in the original extended abstract.

Biswas, Rupak↗
NASA NTRS2002

The Delta x B = 0 Constraint Versus Minimization of Numerical Errors in MHD Simulations

The MHD equations are a system of non-strictly hyperbolic conservation laws. The non-convexity of the inviscid flux vector resulted in corresponding Jacobian matrices with undesirable properties. It has previously been shown by Powell et al. (1995) that an 'almost' equivalent MHD system in non-conservative form can be derived. This non-conservative system has a better conditioned eigensystem. Aside from Powell et al., the MHD equations can be derived from basic principles in either conservative or non-conservative form. The Delta x B = 0 constraint of the MHD equations is only an initial condition constraint, it is very different from the incompressible Navier-Stokes equations in which the divergence condition is needed to close the system (i.e., to have the same number of equations and the same number of unknown). In the MHD formulations, if Delta x B = 0 initially, all one needs is to construct appropriate numerical schemes that preserve this constraint at later time evolutions. In other words, one does not need the Delta x B condition to close the MHD system. We formulate our new scheme together with the Cargo & Gallice (1997) form of the MHD approximate Riemann solver in curvilinear grids for both versions of the MHD equations. A novel feature of our new method is that the well-conditioned eigen-decomposition of the non-conservative MHD equations is used to solve the conservative equations. This new feature of the method provides well-conditioned eigenvectors for the conservative formulation, so that correct wave speeds for discontinuities are assured. The justification for using the non-conservative eigen-decomposition to solve the conservative equations is that our scheme has a better control of the numerical error associated with the divergence of the magnetic condition. Consequently, computing both forms of the equations with the same eigen-decomposition is almost equivalent. It will be shown that this approach, using the non-conservative eigensystem when solving the conservative equations, also works well in the context of standard shock-capturing schemes.

Yee, H. C.↗
NASA NTRS2002

The Delta(dot) B = O Constraint vs. Minimization of Numerical Errors in MHD Simulations

The MHD equations are a system of non-strictly hyperbolic conservation laws. The non-convexity of the inviscid flux vector resulted in corresponding Jacobian matrices with undesirable properties. On the other hand, the MHD equations can be derived from basic principles in either conservative or non-conservative form. The non-conservative system has a better conditioned eigensystem. The Delta(dot)B = 0 constraint of the A4HD equations is only an initial condition constraint. One does not need the Delta(dot)B condition to close the MHD system. We formulate our new low dissipative high order scheme together with the Cargo & Gallice (1997) form of the MHD approximate Riemann solver in curvilinear grids for both versions of the MHD equations. A novel feature of our new method is that the well-conditioned eigen-decomposition of the non-conservative MHD equations is used to solve the conservative equations. This new feature of the method provides well-conditioned eigenvectors for the conservative formulation, so that correct wave speeds for discontinuities are assured. The justification for using the non-conservative eigen-decomposition to solve the conservative equations is that our scheme has a better control of the numerical error associated with the Delta(dot)B condition. Consequently, computing both forms of the equations with the same eigen-decomposition is almost equivalent. It will be shown that this approach, using the non-conservative eigensystem when solving the conservative equations, also works well in the context of standard shock-capturing schemes.

Yee, H. C.↗
NASA NTRS2003

Efficient Low Dissipative High Order Schemes for Multiscale MHD Flows: Minimization of Delta * B Numerical Error - II

The generalization of a class of low-dissipative high order filter finite difference schemes for long time wave propagation of shock/turbulence/combustion compressible viscous gas dynamic flows to compressible MHD equations for structured curvilinear grids has been developed. The new scheme consists of a divergence free preserving high order spatial base scheme with a filter approach which can be divergence-free preserving depending on the type of filter operator being used, the method of applying the filter step, and the type of flow problem to be considered. Several variants of the filter approach that cater to different flow types are proposed. These filters provide a natural and efficient way for the minimization of the divergence of the magnetic field (Delta * B) numerical error in the sense that no standard divergence cleaning is required. Performance evaluation of these variants, and the key role that the proper treatment of their corresponding numerical boundary conditions can play will be illustrated. Many levels of grid refinement and detailed comparison with several commonly used compressible MHD shock-capturing schemes will be sought. For certain MHD 2-D test problems, divergence free preservation of the magnetic fields of these filter schemes has been achieved.

Sjoegreen, Bjoern↗
NASA NTRS2003

Efficient Low Dissipative High Order Schemes for Multiscale MHD Flows, I: Basic Theory

The objective of this paper is to extend our recently developed highly parallelizable nonlinear stable high order schemes for complex multiscale hydrodynamic applications to the viscous MHD equations. These schemes employed multiresolution wavelets as adaptive numerical dissipation controls t o limit the amount of and to aid the selection and/or blending of the appropriate types of dissipation to be used. The new scheme is formulated for both the conservative and non-conservative form of the MHD equations in curvilinear grids. The four advantages of the present approach over existing MHD schemes reported in the open literature are as follows. First, the scheme is constructed for long-time integrations of shock/turbulence/combustion MHD flows. Available schemes are too diffusive for long-time integrations and/or turbulence/combustion problems. Second, unlike exist- ing schemes for the conservative MHD equations which suffer from ill-conditioned eigen- decompositions, the present scheme makes use of a well-conditioned eigen-decomposition obtained from a minor modification of the eigenvectors of the non-conservative MHD equations t o solve the conservative form of the MHD equations. Third, this approach of using the non-conservative eigensystem when solving the conservative equations also works well in the context of standard shock-capturing schemes for the MHD equations. Fourth, a new approach to minimize the numerical error of the divergence-free magnetic condition for high order schemes is introduced. Numerical experiments with typical MHD model problems revealed the applicability of the newly developed schemes for the MHD equations.

Sjoegreen, Bjoern↗
NASA NTRS2005

3 Lectures: "Lagrangian Models", "Numerical Transport Schemes", and "Chemical and Transport Models"

The topics for the three lectures for the Canadian Summer School are Lagrangian Models, numerical transport schemes, and chemical and transport models. In the first lecture I will explain the basic components of the Lagrangian model (a trajectory code and a photochemical code), the difficulties in using such a model (initialization) and show some applications in interpretation of aircraft and satellite data. If time permits I will show some results concerning inverse modeling which is being used to evaluate sources of tropospheric pollutants. In the second lecture I will discuss one of the core components of any grid point model, the numerical transport scheme. I will explain the basics of shock capturing schemes, and performance criteria. I will include an example of the importance of horizontal resolution to polar processes. We have learned from NASA's global modeling initiative that horizontal resolution matters for predictions of the future evolution of the ozone hole. The numerical scheme will be evaluated using performance metrics based on satellite observations of long-lived tracers. The final lecture will discuss the evolution of chemical transport models over the last decade. Some of the problems with assimilated winds will be demonstrated, using satellite data to evaluate the simulations.

Anne Douglass↗
NASA NTRS2005

Adaptive Numerical Dissipation Control in High Order Schemes for Multi-D Non-Ideal MHD

The required type and amount of numerical dissipation/filter to accurately resolve all relevant multiscales of complex MHD unsteady high-speed shock/shear/turbulence/combustion problems are not only physical problem dependent, but also vary from one flow region to another. In addition, proper and efficient control of the divergence of the magnetic field (Div(B)) numerical error for high order shock-capturing methods poses extra requirements for the considered type of CPU intensive computations. The goal is to extend our adaptive numerical dissipation control in high order filter schemes and our new divergence-free methods for ideal MHD to non-ideal MHD that include viscosity and resistivity. The key idea consists of automatic detection of different flow features as distinct sensors to signal the appropriate type and amount of numerical dissipation/filter where needed and leave the rest of the region free from numerical dissipation contamination. These scheme-independent detectors are capable of distinguishing shocks/shears, flame sheets, turbulent fluctuations and spurious high-frequency oscillations. The detection algorithm is based on an artificial compression method (ACM) (for shocks/shears), and redundant multiresolution wavelets (WAV) (for the above types of flow feature). These filters also provide a natural and efficient way for the minimization of Div(B) numerical error.

Yee, H. C.↗
NASA NTRS2006

Newly-Developed 3D GRMHD Code and its Application to Jet Formation

We have developed a new three-dimensional general relativistic magnetohydrodynamic code by using a conservative, high-resolution shock-capturing scheme. The numerical fluxes are calculated using the HLL approximate Riemann solver scheme. The flux-interpolated constrained transport scheme is used to maintain a divergence-free magnetic field. We have performed various 1-dimensional test problems in both special and general relativity by using several reconstruction methods and found that the new 3D GRMHD code shows substantial improvements over our previous model. The . preliminary results show the jet formations from a geometrically thin accretion disk near a non-rotating and a rotating black hole. We will discuss the jet properties depended on the rotation of a black hole and the magnetic field strength.

Mizuno, Y.↗
NASA NTRS2006

3-D GRMHD Simulations of Disk-Jet Coupling and Emission

We have performed a fully 3-D GRMHD simulation of jet formation from a thin accretion disk around a Schwarzschild black hole with a free-falling corona. The simulation results show that a bipolar jet is initially created. At later times, the accretion disk becomes thick and the jet fades resulting in a wind that is ejected from the surface of the thickened (torus-like) disk. This evolution of disk-jet coupling suggests that the jet fades with a thickened accretion disk. Recently we have developed two new codes: 3 -D GRMHD: RelAtivIStic magnetoHydrodynamica1 sImulatioN (RAISHIN) code constructed by modern high-resolution shock-capturing (HRSC) techniques and 3-D GRPIC code. We have calculated free-free and synchrotron emission from the disks and jet/outflows obtained from our GRMHD simulations using a fully covariant radiative transfer formulation.

Nishikawa, K.-I.↗
NASA NTRS2006

GRMHD Simulations of Jet Formation with a New Code

We have developed a new three-dimensional general relativistic magnetohydrodynamic (GRMHD) code by using a conservative, high-resolution shock-capturing scheme. The numerical fluxes are calculated using the HLL approximate Riemann solver scheme. The flux-interpolated, constrained transport scheme is used to maintain a divergence-free magnetic field. Various one-dimensional test problems in both special and general relativity show significant improvements over our previous model. We have performed simulations of jet formations from a geometrically thin accretion disk near both nonrotating and rotating black holes. The new simulation results show that the jet is formed in the same manner as in previous work and propagates outward. In the rotating black hole cases, jets form much closer to the black hole's ergosphere and the magnetic field is strongly twisted due the frame-dragging effect. As the magnetic field strength becomes weaker, a larger amount of matter is launched with the jet. On the other hand, when the magnetic field strength becomes stronger, the jet has less matter and becomes poynting-flux dominated. We will also discuss how the jet properties depend on the rotation of a black hole.

Mizuno, Y.↗