Search NASA⌕ Search

SEARCH · Search NASA

Results for “Snow model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Evaluation of VIIRS and MODIS snow cover fraction in High-Mountain Asia using Landsat 8 OLI

We present thefirst application of the Snow Covered Area and Grain size model (SCAG) tothe Visible Infrared imaging Radiometer Suite (VIIRS) and assess these retrievals withfiner-resolution fractional snow cover maps from Landsat 8 Operational Land Imager (OLI).Because Landsat 8 OLI avoids saturation issues common to Landsat 1–7 in the visiblewavelengths, we re-assess the accuracy of the SCAG fractional snow cover maps fromModerate Resolution Imaging Spectroradiometer (MODIS) that were previously evaluatedusing data from earlier Landsat sensors. Use of the fractional snow cover maps fromLandsat 8 OLI shows a negative bias of−0.5% for MODSCAG and−1.3% for VIIRSCAG,whereas previous MODSCAG evaluations found a bias of−7.6% in the Himalaya. Wefindsimilar root mean squared error (RMSE) values of 0.133 and 0.125 for MODIS and VIIRS,respectively. The Recall statistic (probability of detection) for cells with more than 15%snow cover in this challenging steep topography was found to be 0.90 for both MODSCAGand VIIRSCAG, significantly higher than previous evaluations based on Landsat 5Thematic Mapper (TM) and 7 Enhanced Thematic Mapper Plus (ETM+). In addition,daily retrievals from MODIS and VIIRS are consistent across gradients of elevation, slope,and aspect. Different native resolutions of the gridded products at 1 km and 500 m forVIIRS and MODIS, respectively, result in snow cover maps showing a slightly differentdistribution of values with VIIRS having more mixed pixels and MODIS having 7% morepure snow pixels. Despite the resolution differences, the snow maps from both sensorsproduce similar total snow-covered areas and snow-line elevations in this region, withR2values of 0.98 and 0.88, respectively. Wefind that the SCAG algorithm performsconsistently across various spatial resolutions and that fractional snow cover mapsfrom the VIIRS instruments aboard Suomi NPP, JPPS–1, and JPPS–2 can be asuitable replacement as MODIS sensors reach their ends of life.

Karl Rittger↗

Data from: "Towards CONUS-Wide ML-Augmented Conceptually-Interpretable Modeling of Catchment-Scale Precipitation-Storage-Runoff Dynamics"

This data package was generated to support the manuscript “Towards CONUS-Wide Machine Learning-Augmented Conceptually Interpretable Modeling of Catchment-Scale Precipitation-Storage-Runoff Dynamics.” It provides input files, model outputs, plotting data, scripts, notebooks, and documentation used to develop, evaluate, and reproduce Mass-Conserving Perceptron (MCP)-based hydrologic modeling experiments across 513 selected Catchment Attributes and Meteorology for Large-sample Studies in the United States (CAMELS-US) basins. The files are organized by modeling component and analysis purpose, including rainfall–runoff experiments, snow module experiments, coupled hydrologic-snow experiments, Long Short-Term Memory (LSTM) benchmark results, model skill metrics, initialization and epoch records, cell-state normalization files, Akaike Information Criterion (AIC)-based model comparison files, and data used to generate manuscript figures. Tabular files can be opened using standard spreadsheet software or Python/R data-analysis tools. Python scripts, Jupyter notebooks, and selected MATLAB scripts are included for model execution, postprocessing, plotting, and statistical analysis. Quality assurance and quality control were conducted through the source-data selection and modeling workflow. Meteorological forcing, streamflow, and static catchment attributes were derived from the CAMELS-US dataset, and snow water equivalent data were derived from the University of Arizona (UA) Snow Water Equivalent dataset. Selected basins and time periods were screened during the associated research workflow to avoid missing observations or poor-quality cases. Static geospatial features were processed primarily using Quantum Geographic Information System (QGIS) and Geospatial Data Abstraction Library (GDAL) workflows. Additional details are provided in the associated manuscript and documentation.

ESS-DIVE CSV File Formatting Guidelines Reporting ↗

Simulation of the Microwave Emission of Multi-layered Snowpacks Using the Dense Media Radiative Transfer Theory: the DMRT-ML Model

DMRT-ML is a physically based numerical model designed to compute the thermal microwave emission of a given snowpack. Its main application is the simulation of brightness temperatures at frequencies in the range 1-200 GHz similar to those acquired routinely by spacebased microwave radiometers. The model is based on the Dense Media Radiative Transfer (DMRT) theory for the computation of the snow scattering and extinction coefficients and on the Discrete Ordinate Method (DISORT) to numerically solve the radiative transfer equation. The snowpack is modeled as a stack of multiple horizontal snow layers and an optional underlying interface representing the soil or the bottom ice. The model handles both dry and wet snow conditions. Such a general design allows the model to account for a wide range of snow conditions. Hitherto, the model has been used to simulate the thermal emission of the deep firn on ice sheets, shallow snowpacks overlying soil in Arctic and Alpine regions, and overlying ice on the large icesheet margins and glaciers. DMRT-ML has thus been validated in three very different conditions: Antarctica, Barnes Ice Cap (Canada) and Canadian tundra. It has been recently used in conjunction with inverse methods to retrieve snow grain size from remote sensing data. The model is written in Fortran90 and available to the snow remote sensing community as an open-source software. A convenient user interface is provided in Python.

snowpacks↗

Snow-Cover Variability in North America in the 2000-2001 Winter as Determined from MODIS Snow Products

Moderate Resolution Imaging Spectroradiometer (MODIS) snow-cover maps have been available since September 13, 2000. These products, at 500-m spatial resolution, are available through the National Snow and Ice Data Center Distributed Active Archive Center in Boulder, Colorado. By the 2001-02 winter, 5-km climate-modeling grid (CMG) products will be available for presentation of global views of snow cover and for use in climate models. All MODIS snow-cover products are produced from automated algorithms that map snow in an objective manner. In this paper, we describe the MODIS snow products, and show snow maps from the fall of 2000 in North America.

Hall, Dorothy K.↗

Snow-Cover Variability in North America in the 2000-2001 Winter as Determined from MODIS Snow Products

Moderate Resolution Imaging Spectroradiometer (MODIS) snow-cover maps have been available since September 13, 2000. These products, at 500 m spatial resolution, are available through the National Snow and Ice Data Center Distributed Active Archive Center in Boulder, Colorado. By the 2001-02 winter, 5 km climate-modeling grid (CMG) products will be available for presentation of global views of snow cover and for use in climate models. All MODIS snow-cover products are produced from automated algorithms that map snow in an objective manner. In this paper, we describe the MODIS snow products, and show snow maps from the fall of 2000 in North America.

Hall, Dorothy K.↗

Inversion of snow parameters from passive microwave remote sensing measurements by a neural network trained with a multiple scattering model

Simultaneous inversion of the three parameters was performed which included mean-grain size of ice particles in snow, snow density, and snow temperatures from five brightness temperatures. Good results for the inversion of parameters were obtained using the neural network based on the simulated data computed from the dense media radiative transfer equation that takes into account the effects of multiple scattering.

Tsang, Leung↗

The application of ERTS imagery to mapping snow cover in the western United States

The author has identified the following significant results. In much of the western United States a large part of the utilized water comes from accumulated mountain snowpacks; thus, accurate measurements of snow distributions are required for input to streamflow prediction models. The application of ERTS-1 imagery for mapping snow has been evaluated for two geographic areas, the Salt-Verde watershed in central Arizona and the southern Sierra Nevada in California. Techniques have been developed to identify snow and to differentiate between snow and cloud. The snow extent for these two drainage areas has been mapped from the MSS-5 (0.6 - 0.7 microns) imagery and compared with aerial survey snow charts, aircraft photography, and ground-based snow measurements. The results indicate that ERTS imagery has substantial practical applications for snow mapping. Snow extent can be mapped from ERTS-1 imagery in more detail than is depicted on aerial survey snow charts. Moreover, in Arizona and southern California cloud obscuration does not appear to be a serious deterrent to the use of satellite data for snow survey. The costs involved in deriving snow maps from ERTS-1 imagery appear to be very reasonable in comparison with existing data collection methods.

Barnes, J. C.↗

Reconstruction of Historical Surface Mass Balance, 1984–2017 from GreenTrACS Multi-offset Ground-penetrating Radar

We present continuous estimates of snow and firn density, layer depth and accumulation from a multi-channel, multi-offset, ground-penetrating radar traverse. Our method uses the electromagnetic velocity, estimated from waveform travel-times measured at common-midpoints between sources and receivers. Previously, common-midpoint radar experiments on ice sheets have been limited to point observations. We completed radar velocity analysis in the upper ~2 m to estimate the surface and average snow density of the Greenland Ice Sheet. We parameterized the Herron and Langway (1980) firn density and age model using the radar-derived snow density, radar-derived surface mass balance (2015–2017) and reanalysis-derived temperature data. We applied structure-oriented filtering to the radar image along constant age horizons and increased the depth at which horizons could be reliably interpreted. We reconstructed the historical instantaneous surface mass balance, which we averaged into annual and multidecadal products along a 78 km traverse for the period 1984–2017. We found good agreement between our physically constrained parameterization and a firn core collected from the dry snow accumulation zone, and gained insights into the spatial correlation of surface snow density.

glacier geophysics↗

Additional Contributions to the Development of the New Snow-Physics Scheme for SSiB

The Simplified Simple Biosphere Model (SSiB) had a well-documented problem with snowmelt timing and infiltration. A new snow-physics scheme was developed for use in SSIB. In this, the snow layer is separated from the soil, with its own energy budget and temperature. Solar energy reaching the top of the snowpack is divided into three parts: one, reflected by the snow; two, absorbed by the snow; and three, transmitted to the ground following a simple extinction relation. Heat is exchanged between the ground and snow by conduction and by radiation through an arbitrary air-gap between them. In the GSWP exercise using the GEWEX ISLSCP Initiative I forcing data (hereafter "offline"), it was found that the new snow scheme ameliorated a significant fraction of snowmelt time-delay as compared to observations from satellite. It also produced warmer ground temperatures under the snowpack, which allowed realistic meltwater infiltration, resulting in better simulated spring soil moisture recharge and peak runoff amount as compared to observations. An ensemble of six June-July-August (JJA) simulations for 1987 and 1988 were performed with the NASA Goddard GEOS II GCM coupled with the new snow-physics SSIB using new initial soil moisture (ISM) from the offline simulations. The GCM produced more realistic precipitation in northern regions that had large snowmelt and wetter ISM in response to better snow-physics, as compared to simulations with ISM without the new snow scheme. The new SSiB-GCM also increased the interannual precipitation signal in the Indian monsoon region, resulting from changes in ISM in the Himalayas and central Asia.

Mocko, David M.↗

Comparison of measurements and theory for backscatter from bare and snow-covered saline ice

C-band radar backscatter measurements were made on artificially grown sea ice during the winters of 1987-1988 and 1988-1989. These measurements were made on smooth, rough, and snow-covered saline ice. The measured sigma-deg(theta) of smooth saline ice (rms height less than 0.05 cm) disagreed with small perturbation method (SPM) surface scattering predictions. Using physical parameters of the ice in a simple layer model, it us shown that this discrepancy can be explained by scattering from beneath the surface. A thin (7-cm) dry snow cover had a significant influence on backscatter from the smooth ice sheet. This influence was due to scattering from particles within the snow, and can be predicted by a commonly used empirical layer model for snow. The results of backscatter measurements of a moderately rough saline ice sheet were found to agree with SPM predictions.

Bredow, Jonathan W.↗

Studies on Physical Properties of Snow Based on Multi Channel Microwave Radiometer

The analysis of the data observed over a snow field with a breadboard model of MSR (microwave scanning radiometer) to be installed in MOS-1 (Marine Observation Satellite-1) indicates that: (1) the influence of incident angle on brightness temperature is larger in horizontal polarization component than in vertical polarization component. The effect of incident angle depends upon the property of snow with larger value for dry snow; (2) the difference of snow surface configuration consisting of artifically made parallel ditches of 5 cm depth and 5 cm width with spacing of 10 and 30 cm respectively which are oriented normal to electrical axis do not affect brightness temperature significantly; and (3) there is high negative correlation between brightness temperature and snow depth up to the depth of 70 cm which suggests that the snow depth can be measured with a two channel microwave radiometer up to this depth.

Tsuchiya, K.↗

Polarimetric backscattering from sea ice

Polarimetric backscattering from sea ice is presented. Theoretical models for backscattering are first presented for various ice types. Then, theoretical results are compared with experimental data for new thin ice, first-year ice, and multi-year ice. Sea ice is modeled as a layer medium containing random scatterers and rough interfaces. For multi-year sea ice with snow cover, the sea ice layer is modeled as an ice background with embedded spheroidal air bubbles and the snow layer as air with ice grains. The hummocky topography on multi-year ice is characterized by a Gaussian distribution which has an averaging effect on backscattering coefficients. First-year sea ice is described by an ice medium hosting ellipsoidal brine inclusions. These inclusions are oriented preferentially in the vertical direction due to the columnar structure of first-year sea ice. Azimuthally, the orientation of the brine pockets are random corresponding to the random c-axes in sea ice, unless the axes are oriented by sea currents. For thin ice in newly opened leads, it has been observed that there exists a thin brine layer with very high salinity on the top surface of the new ice. This brine layer is depicted as a medium with high permittivity which can significantly affect electromagnetic scattering signatures from the lower thin ice layer, with a higher fractional volume of brine inclusions due to higher salinity as compared to thick first-year sea ice. The rough medium interfaces are described as Gaussian rough surfaces characterized by root-mean-square heights and surface correlation lengths. The contribution from rough surface, calculated under the Kirchhoff approximation or small perturbation method, is assumed to be independent from volume scattering. The total loss including absorption and scattering losses in the scattering media is represented by the imaginary part of effective permittivity obtained from the strong fluctuation theory. The polarimetric scattering coefficients for different ice types are then derived under the distorted Born approximation.

Nghiem, S. V.↗

Applying the Dark Target Aerosol Algorithm with Advanced Himawari Imager Observations During the KORUS-AQ Field Campaign

For nearly 2 decades we have been quantitatively observing the Earth's aerosol system from space at one or two times of the day by applying the Dark Target family of algorithms to polar-orbiting satellite sensors, particularly MODIS and VIIRS. With the launch of the Advanced Himawari Imager (AHI) and the Advanced Baseline Imagers (ABIs) into geosynchronous orbits, we have the new ability to expand temporal coverage of the traditional aerosol optical depth (AOD) to resolve the diurnal signature of aerosol loading during daylight hours. The Korean–United States Air Quality (KORUS-AQ) campaign taking place in and around the Korean peninsula during May–June 2016 initiated a special processing of full-disk AHI observations that allowed us to make a preliminary adoption of Dark Target aerosol algorithms to the wavelengths and resolutions of AHI. Here,we describe the adaptation and show retrieval results from AHI for this 2-month period. The AHI-retrieved AOD is collocated in time and space with existing AErosol RObotic NETwork stations across Asia and with collocated Terra and Aqua MODIS retrievals. The new AHI AOD product matches AERONET, and the standard MODIS product does as well, and the agreement between AHI and MODIS retrieved AOD is excellent, as can be expected by maintaining consistency in algorithm architecture and most algorithm assumptions. Furthermore, we show that the new product approximates the AERONET-observed diurnal signature. Examining the diurnal patterns of the new AHI AOD product we find specific areas over land where the diurnal signal is spatially cohesive. For example, in Bangladesh the AOD in-creases by 0.50 from morning to evening, and in northeast China the AOD decreases by 0.25. However, over open ocean the observed diurnal cycle is driven by two artifacts, one associated with solar zenith angles greater than 70t hat may be caused by a radiative transfer model that does not properly represent the spherical Earth and the other artifact associated with the fringes of the 40 degree glint angle mask. This opportunity during KORUS-AQ provides encouragement to move towards an operational Dark Target algorithm for AHI. Future work will need to re-examine masking including snow mask, reevaluate assumed aerosol models for geosynchronous geometry, address the artifacts over the ocean, and investigate size parameter retrieval from the over-ocean algorithm.

Gupta, Pawan↗

Emission characteristics of snow and ice in the microwave range

Some results are presented of a two year investigation on microwave emissions from snow. Included in the investigation were: theoretical studies; laboratory measurements of electrical properties of snow and similar materials; numerical modelling of hypothetical and real snowpacks; analysis of microwave data obtained on everflights; and quantative measurements of natural and artificial snowpacks made in the field. Results indicate that a fairly simple combination of microwave polarizations and frequencies can ultimately be used to monitor the water equivalent and free-water content as well as the distribution of snow. This understanding may also shed light on the physics of microwave emission from other wet, granular, layered media.

Meier, M. F.↗

A cost-effectiveness comparison of existing and Landsat-aided snow water content estimation systems

This study describes how Landsat imagery can be cost-effectively employed to augment an operational hydrologic model. Attention is directed toward the estimation of snow water content, a major predictor variable in the volumetric runoff forecasting model presently used by the California Department of Water Resources. A stratified double sampling scheme is supplemented with qualitative and quantitative analyses of existing operations to develop a comparison between the existing and satellite-aided approaches to snow water content estimation. Results show a decided advantage for the Landsat-aided approach.

Sharp, J. M.↗

Development of a “Nature Run” for Observing System Simulation Experiments (OSSEs) for Snow Mission Development

Snow is a fundamental component of global and regional water budgets, particularly in mountainous areas and regions downstream that rely on snowmelt for water resources. Land surface models (LSMs) are commonly used to develop spatially distributed estimates of snow water equivalent (SWE) and runoff. However, LSMs are limited by uncertainties in model physics and parameters, among other factors. In this study, we describe the use of model calibration tools to improve snow simulations within the Noah-MP LSM as the first step in an observing system simulation experiment (OSSE). Noah-MP is calibrated against the University of Arizona (UA) SWE product over a western Colorado domain. With spatially varying calibrated parameters, we run calibrated and default Noah-MP simulations for water years 2010–20. By evaluating both simulations against the UA dataset, we show that calibration decreases domain averaged temporal RMSE and bias for snow depth from 0.15 to 0.13 m and from −0.036 to −0.0023 m, respectively, and improves the timing of snow ablation. Increased snow simulation performance also improves estimates of model-simulated runoff in four of six study basins, though only one has statistically significant improvement. Spatially distributed Noah-MP snow parameters perform better than default uniform values. We demonstrate that calibrating variables related to snow albedo calculations and rain–snow partitioning, among other processes, is a necessary step for creating a nature run that reasonably approximates true snow conditions for the OSSEs. Additionally, the inclusion of a snowfall scaling term can address biases in precipitation from meteorological forcing datasets, further improving the utility of LSMs for generating reliable spatiotemporal estimates of snow.

Melissa L. Wrzesien↗

Effects of nontropical forest cover on climate

The albedo of a forest with snow on the ground is much less than that of snow-covered low vegetation such as tundra. As a result, simulation of the Northern Hemisphere climate, when fully forested south of a suitably chosen taiga/tundra boundary (ecocline), produces a hemispheric surface air temperature 1.9 K higher than that of an earth devoid of trees. Using variations of the solar constant to force climate changes in the GLAS Multi-Layer Energy Balance Model, the role of snow-albedo feedback in increasing the climate sensitivity to external perturbations is reexamined. The effect of snow-albedo feedback is found to be significantly reduced when a low albedo is used for snow over taiga, south of the fixed latitude of the ecocline. If the ecocline shifts to maintain equilibrium with the new climate - which is presumed to occur in a prolonged perturbation when time is sufficient for trees to grow or die and fall - the feedback is stronger than for a fixed ecocline, especially at high latitudes. However, this snow/vegetation-albedo feedback is still essentially weaker than the snow-albedo feedback in the forest-free case. The loss of forest to agriculture and other land-use would put the present climate further away from that associated with the fully forested earth south of the ecocline and closer to the forest-free case. Thus, the decrease in nontropical forest cover since prehistoric times has probably affected the climate by reducing the temperatures and by increasing the sensitivity to perturbations, with both effects more pronounced at high latitudes.

Otterman, J.↗

Using Commercial Satellite Imagery to Reconstruct 3 m and Daily Spring Snow Water Equivalent

Snow water equivalent (SWE) distribution at fine spatial scales (≤10 m) is difficult to estimate due to modeling and observational constraints. However, the distribution of SWE throughout the spring snowmelt season is often correlated to the timing of snow disappearance. Here, we show that snow cover maps generated from PlanetScope's constellation of Dove Satellites can resolve the 3 m date of snow disappearance across seven alpine domains in California and Colorado. Across a 5-year period (2019–2023), the average uncertainty in the date of snow disappearance, or the period of time between the last date of observed snow cover and the first date of observed snow absence, was 3 days. Using a simple shortwave-based snowmelt model calibrated at nearby snow pillows, the PlanetScope date of snow disappearance could be used to reconstruct spring SWE. Relative to lidar SWE estimates, the SWE reconstruction had a spatial coefficient of correlation of 0.75, and SWE spatial variability that was biased by 9%, on average. SWE reconstruction biases were then improved to within 0.04 m, on average, by calibrating snowmelt rates to track the spring temporal evolution of fractional snow cover observed by PlanetScope, including fractional snow cover over the full modeling domain, and across domain subsections where snowmelt rates may differ. This study demonstrates the utility of fine-scale and high-frequency optical observations of snow cover, and the simple and annually repeatable connections between snow cover and spring snow water resources in regions with seasonal snowpack.

Justin M Pflug↗