SEARCH · Search NASA

Results for “Software interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS1976

TPGITF user's manual

The primary purpose of TPG interface (TPGITF) software is to create test patterns, according to a mathematical model, for a real device. In order for the device actually to be tested or to be accurately simulated, a means is required to transform the TPGITF generated test into forms acceptable as input to logic test equipment or to a software logic simulator. The MACRODATA-200 Logic Test System and the LOGSIM logic simulator are the particular systems supported by the TPGITF software. A description is presented of the TPGITF software processor. It is assumed that the reader is familiar with the TPG, LOGSIM, and TOIL systems. Flow charts are given.

Pitts, E. R.↗

NASA NTRS1977

A scanning laser rangefinder for a robotic vehicle

A scanning Laser Rangefinder (LRF) which operates in conjunction with a minicomputer as part of a robotic vehicle is described. The description, in sufficient detail for replication, modification, and maintenance, includes both hardware and software. Also included is a discussion of functional requirements relative to a detailing of the instrument and its performance, a summary of the robot system in which the LRF functions, the software organization, interfaces and description, and the applications to which the LRF has been put.

Lewis, R. A.↗

NASA NTRS1980

High-power transmitter automation

The current status of the transmitter automation development applicable to all transmitters in the deep space network is described. Interface and software designs are described that improve reliability and reduce the time required for subsystem turn-on and klystron saturation to less than 10 minutes.

Gosline, R.↗

NASA NTRS1981

Development of a CCD array as an imaging detector for advanced X-ray astrophysics facilities

The development of a charge coupled device (CCD) X-ray imager for a large aperture, high angular resolution X-ray telescope is discussed. Existing CCDs were surveyed and three candidate concepts were identified. An electronic camera control and computer interface, including software to drive a Fairchild 211 CCD, is described. In addition a vacuum mounting and cooling system is discussed. Performance data for the various components are given.

Schwartz, D. A.↗

NASA NTRS1981

High-power transmitter automation, part 2

The current status of the transmitter automation development is reported. The work described is applicable to all transmitters in the Deep Space Network. New interface and software designs are described which improve reliability and reduce the time required for subsystem turn on and klystron saturation.

Gregg, M. A.↗

NASA NTRS1984

Analysis and calculation of macrosegregation in a casting ingot, exhibits C and E

A computer model which describes the solidification of a binary metal alloy in an insulated rectangular mold with a temperature gradient is presented. A numerical technique, applicable to a broad class of moving boundary problems, was implemented therein. The solidification model described is used to calculate the macrosegregation within the solidified casting by coupling the equations for liquid flow in the solid/liquid or mushy zone with the energy equation for heat flow throughout the ingot and thermal convection in the bulk liquid portion. The rate of development of the solid can be automatically calculated by the model. Numerical analysis of such solidification parameters as enthalpy and boundary layer flow is displayed. On-line user interface and software documentation are presented.

Poirier, D. R.↗

NASA NTRS1986

MCC flight operations automation of STS orbiter systems monitoring

The integration of new capabilities into the Mission Control Center at the Johnson Space Center in Houston, Texas in order to improve the data monitoring and analysis of the STS is discussed. User interface application software and systems, such as the flight data file Shuttle mission simulator and failure analysis program, to be utilized for flight operations automation are examined. Consideration is given to task automation, the trend monitoring system, the data retrieval system, and the launch processing system. The development and functions of the Shuttle data analysis system, which is to operate in real time, are described.

Bates, William V., Jr.↗

NASA NTRS1987

Space shuttle onboard navigation console expert/trainer system

A software system for use in enhancing operational performance as well as training ground controllers in monitoring onboard Space Shuttle navigation sensors is described. The Onboard Navigation (ONAV) development reflects a trend toward following a structured and methodical approach to development. The ONAV system must deal with integrated conventional and expert system software, complex interfaces, and implementation limitations due to the target operational environment. An overview of the onboard navigation sensor monitoring function is presented, along with a description of guidelines driving the development effort, requirements that the system must meet, current progress, and future efforts.

Wang, Lui↗

NASA NTRS1988

Description of graphics translation software between Intergraph and Tektronix systems

The requirement for Marshall Space Flight Center's Photo Analysis to use existing 3-D Intergraph graphic files on an existing Tektronix 4129 3-D graphics workstation and the unavailability of an off-the-shelf Intergraph to Tektronix translator required the development of such a translater. Using the output of Intergraph's standard interchange format converter, the 3-D graphic information of Intergraph's files are reformatted and compressed. The 3-D image is reconstructed using Tektronix's software terminal interface graphic library (STI).

Rieckhoff, Tom↗

NASA NTRS1988

A flexible telemetry processor for spacecraft testing

In the past, telemetry data systems in support of JPL flight projects were designed specifically for each mission. The Magellan System Test Data Processing Subsystem (STDPS) marks a departure from these past designs. For the first time, a reusable telemetry-processing subsystem has been designed that is flexible enough to meet the spacecraft-testing requirements of the present project, and can be easily changed for future projects as well. These changes are all accomplished through a user-friendly, menu-oriented interface. Extensive software reprogramming is no longer required.

Leng, Christopher↗

NASA NTRS1989

Proceedings of the 3rd Annual Conference on Aerospace Computational Control, volume 1

Conference topics included definition of tool requirements, advanced multibody component representation descriptions, model reduction, parallel computation, real time simulation, control design and analysis software, user interface issues, testing and verification, and applications to spacecraft, robotics, and aircraft.

Bernard, Douglas E.↗

NASA NTRS1989

Test and validation for robot arm control dynamics simulation

The Flight Telerobotic Servicer (FTS) program will require an ability to develop, in a cost effective manner, many simulation models for design, analysis, performance evaluation, and crew training. Computational speed and the degree of modeling fidelity associated with each simulation must be commensurate with problem objectives. To demonstrate evolving state-of-the-art general purpose multibody modeling capabilities, to validate these by laboratory testing, and to expose their modeling shortcomings, two focus problems at the opposite ends of the simulation spectrum are defined: (1) Coarse Acquisition Control Dynamics. Create a real time man-in-the-control-loop simulator. Provide animated graphical display of robot arm dynamics and tactile feedback sufficient for cueing the operator. Interface simulator software with human operated tactile feedback controller; i.e., the Kraft mini-master. (2) Fine, Precision Mode Control Dynamics. Create a high speed, high fidelity simulation model for the design, analysis, and performance evaluation of autonomous 7 degree-of-freedom (DOF) trajectory control algorithms. This model must contain detail dynamic models for all significant dynamics elements within the robot arm, such as joint drive mechanisms.

Yae, K. Harold↗

NASA NTRS1990

Use of a personal computer for the real-time reception and analysis of data from a sounding rocket experiment

In September 1988 the Earth and Planetary Atmospheres Group of the Space Sciences Laboratory of the University of California at Berkeley flew an experiment on a high-altitude sounding rocket launched from the NASA Wallops Flight Facility in Virginia. The experiment, BEARS (Berkeley EUV Airglow Rocket Spectrometer), was designed to obtain spectroscopic data on the composition and structure of the earth's upper atmosphere. Consideration is given to the objectives of the BEARS experiment; the computer interface and software; the use of remote data transmission; and calibration, integration, and flight operations.

Herrick, W. D.↗

NASA NTRS1990

General-purpose interface bus for multiuser, multitasking computer system

The architecture of a multiuser, multitasking, virtual-memory computer system intended for the use by a medium-size research group is described. There are three central processing units (CPU) in the configuration, each with 16 MB memory, and two 474 MB hard disks attached. CPU 1 is designed for data analysis and contains an array processor for fast-Fourier transformations. In addition, CPU 1 shares display images viewed with the image processor. CPU 2 is designed for image analysis and display. CPU 3 is designed for data acquisition and contains 8 GPIB channels and an analog-to-digital conversion input/output interface with 16 channels. Up to 9 users can access the third CPU simultaneously for data acquisition. Focus is placed on the optimization of hardware interfaces and software, facilitating instrument control, data acquisition, and processing.

Generazio, Edward R.↗

NASA NTRS1991

A PC-based hardware implementation of the maximum-likelihood classifier for the Shuttle Ice Detection System

A PC-based near-real time implementation of a two-channel maximum-likelihood classifier is described. The statistical distribution of the reflectance characteristics of ice, frost, and water formation on spray-on-foam-insulation, which covers the External Tank surface of the Space Shuttle, is acquired. The classification technique is based on these statistics. The computer, set in either a training or a classifying mode, learns the statistics of the various classes, or produces a color-coded image denoting the respective categories of classification. The classified results are memory-mapped for efficiency. The speed of the classification process is only limited by the speed of the digital frame grabber and the software that interfaces the frame grabber to the monitor. The process took 4 seconds for a 512 x 480 pixel image.

Jaggi, S.↗

NASA NTRS1992

CAGI: Computer Aided Grid Interface. A work in progress

Progress realized in the development of a Computer Aided Grid Interface (CAGI) software system in integrating CAD/CAM geometric system output and/or Interactive Graphics Exchange Standard (IGES) files, geometry manipulations associated with grid generation, and robust grid generation methodologies is presented. CAGI is being developed in a modular fashion and will offer fast, efficient and economical response to geometry/grid preparation, allowing the ability to upgrade basic geometry in a step-by-step fashion interactively and under permanent visual control along with minimizing the differences between the actual hardware surface descriptions and corresponding numerical analog. The computer code GENIE is used as a basis. The Non-Uniform Rational B-Splines (NURBS) representation of sculptured surfaces is utilized for surface grid redistribution. The computer aided analysis system, PATRAN, is adapted as a CAD/CAM system. The progress realized in NURBS surface grid generation, the development of IGES transformer, and geometry adaption using PATRAN will be presented along with their applicability to grid generation associated with rocket propulsion applications.

Soni, Bharat K.↗

NASA NTRS1991

Intelligent systems technology infrastructure for integrated systems

A system infrastructure must be properly designed and integrated from the conceptual development phase to accommodate evolutionary intelligent technologies. Several technology development activities were identified that may have application to rendezvous and capture systems. Optical correlators in conjunction with fuzzy logic control might be used for the identification, tracking, and capture of either cooperative or non-cooperative targets without the intensive computational requirements associated with vision processing. A hybrid digital/analog system was developed and tested with a robotic arm. An aircraft refueling application demonstration is planned within two years. Initially this demonstration will be ground based with a follow-on air based demonstration. System dependability measurement and modeling techniques are being developed for fault management applications. This involves usage of incremental solution/evaluation techniques and modularized systems to facilitate reuse and to take advantage of natural partitions in system models. Though not yet commercially available and currently subject to accuracy limitations, technology is being developed to perform optical matrix operations to enhance computational speed. Optical terrain recognition using camera image sequencing processed with optical correlators is being developed to determine position and velocity in support of lander guidance. The system is planned for testing in conjunction with Dryden Flight Research Facility. Advanced architecture technology is defining open architecture design constraints, test bed concepts (processors, multiple hardware/software and multi-dimensional user support, knowledge/tool sharing infrastructure), and software engineering interface issues.

Lum, Henry↗

NASA NTRS1993

A packet switched communications system for GRO

This paper describes the packet switched Instrumenters Communication System (ICS) that was developed for the Command Management Facility at GSFC to support the Gamma Ray Observatory (GRO) spacecraft. The GRO ICS serves as a vital science data acquisition link to the GRO scientists to initiate commands for their spacecraft instruments. The system is ready to send and receive messages at any time, 24 hours a day and seven days a week. The system is based on X.25 and the International Standard Organization's (ISO) 7-layer Open Systems Interconnection (OSI) protocol model and has client and server components. The components of the GRO ICS are discussed along with how the Communications Subsystem for Interconnection (CSFI) and Network Control Program Packet Switching Interface (NPSI) software are used in the system.

Husain, Shabu↗