Search NASA⌕ Search

SEARCH · Search NASA

Results for “Source term calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

SAM Code Development for Source Term Modeling in Fluoride-salt-cooled High-temperature Reactors

The SAM code is under development and supported by DOE-NE’s Nuclear Energy Advanced Modeling and Simulation program as a modern system-level modeling and simulation tool for advanced non-light water reactor safety analyses. These advanced reactor concepts incorporate novel and improved approaches to achieve safety and economic feasibility. Many concepts leverage higher operating temperatures for improved efficiency with a variety of coolants and structural materials to support those needs. Such design choices may also pose unique radiological source term risks. There are continuous efforts to incorporate new physics and phenomena relevant to advanced reactor concepts, including capabilities to enable system-level source term modeling. The Pebble-Bed Fluoride-salt-cooled High-temperature Reactor (PB-FHR) is a promising candidate among advanced nuclear reactor concepts with its improved passive safety characteristics and high thermal efficiency. In addition to past efforts to support the development and utilization of SAM for PB-FHR safety analysis, the species transport modeling capabilities in SAM have been extended to simulate source term phenomena in concepts like the PB-FHR. The PB-FHR concept utilizes pebble-form TRISO fuel and FLiBe salt coolant to provide robust barriers to the release of almost all fission products and radiological source terms. However, tritium poses a unique radiological risk due to its significant production from neutron interactions with 6 Li and 9 Be in the FLiBe as well as its high mobility at elevated temperatures where it can permeate through structural metals. Secondly, the use of graphite at elevated temperatures poses the risk of oxidation damage to any structural components or fuel pebbles that are exposed to accidental air ingress. This report summarizes progress made in modeling these phenomena in SAM, which leverages the system-level multi-physics thermal hydraulic simulation to support an effective engineering-scale source term modeling capability. A tritium transport model is developed to simulate the various transport pathways in FHR and MSR concepts and is presented through verification and validation examples as well as demonstrations simulating experimental test loops and reference plant FHR models. A graphite oxidation model is also introduced to calculate local oxidation rates and is presented with initial validation results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1972

Study of solid rocket motors for a space shuttle booster. Appendix E: Environmental impact statement, solid rocket motor, space shuttle booster

An analysis of the combustion products resulting from the solid propellant rocket engines of the space shuttle booster is presented. Calculation of the degree of pollution indicates that the only potentially harmful pollutants, carbon monoxide and hydrochloric acid, will be too diluted to constitute a hazard. The mass of products ejected during a launch within the troposphere is insignificant in terms of similar materials that enter the atmosphere from other sources. Noise pollution will not exceed that obtained from the Saturn 5 launch vehicle.

Source record↗
NASA NTRS1994

Interpretation of microlensing events in Q2237 + 0305

We point out the uncertainties in the potential models of the foreground galaxy in the gravitational lens Q2237 + 0305. The surface densities and external shears are uncertain by a factor of appproximately less than 2. Very long light curves are calculated for different models using the method developed by Witt (1993) and Lewis et al. (1993). We find that the probability of images being in a quiescent state depends strongly on the potential models and the direction of the source motion relative to the alignment of the (gravitational lens) shear term of the macroimages. For example, the probabilities of finding variations smaller than 0.1 mag and for a period of longer than 0.5 Einstein radii (approximately equals 3-5 yr) in image C and D are approximately 30%. This offers an explanation of why image C and D showed relatively small variations. The quiescent images are more likely to be demagnified, consistent with the observations. Further, the higher the magnification of the macroimages, the weaker are the microlensing events. In addition, we conclude that a simple Gaussian profile has some difficulties in explaining the asymmetric shape and the small amplitude of the observed high-magnification events if they are typical. Source models in which the emission is produced by a brightt compact core and a more extended halo can occur better explain the observed double peak events. More data are needed to clearly distinguish different galaxy potential models.

Witt, Hans J.↗
DOE OSTI2021

Neutron diffraction discriminates between models for the nanoarchitecture of graphene sheets in glassy carbon

Glassy carbon is a chemically inert, biocompatible, disordered material with the graphene sheet as its basic building block. Structural characterisation techniques have so far been unable to provide definitive distinction between the many proposed models for its structure. Computer based simulation methods have made a step forward by predicting structure from interaction potentials, but the results are sensitive to the choice of the potential. Here we use the white neutron beam of the Spallation Neutron Source at Oak Ridge National Laboratory coupled with the SNAP time-of-flight diffractometer to sample the reciprocal space of glassy carbon and calculate accurate radial distribution functions. From the radial distribution information, we determine graphene sheet dimensions, registration, curvature, and assess defect content to rank the proposed structures in terms of their agreement with experimental data. In this work, we find that the recent models derived from empirical potentials give the best agreement.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Global Corn Heat Stress: Mean and SD of Degree Days Above 29°C based on NEX-GDDP-CMIP6 Climate Projections

Description This global dataset provides the estimated mean and standard deviation (SD) of corn heat stress (degree days above 29°C) for a set of climate models in NEX-GDDP-CMIP6 at 0.25-degree resolution. The NEX-GDDP-CMIP6 dataset is comprised of global downscaled climate scenarios derived from the General Circulation Model (GCM) runs conducted under the Coupled Model Intercomparison Project Phase 6 (CMIP6). The current dataset includes: Long-Term Average Degree Days Above 29°C- Historical Long-Term Average Degree Days Above 29°C- SSP245 Long-Term Standard Deviation of Degree Days Above 29°C- Historical Long-Term Standard Deviation of Degree Days Above 29°C- SSP245 The mean and SD are calculated over 1985-2014 for the historical period and over 2035-2064 for future projections. A full description of methods, including growing season, daily temperature distribution, and statistical coefficients, can be found in Haqiqi (2024). The source climate data are obtained from https://ds.nccs.nasa.gov/thredds2/catalog/catalog.html and are described in Thrasher et al (2022). The codes used to create this dataset are available at https://github.com/ihaqiqi/dd29c_nex_cmip6. Acknowledgments This work was supported by the US Department of Energy, Office of Science, Biological and Environmental Research Program, Earth and Environmental Systems Modeling, MultiSector Dynamics under Cooperative Agreement DE-SC0022141. The data processing, computation, and storage were completed on Purdue Anvil supercomputer and cyberinfrastructure supported by the National Science Foundation HDR award # 2118329: "NSF Institute for Geospatial Understanding through an Integrative Discovery Environment (I-GUIDE)". References Haqiqi. I. (2024). Trade can buffer climate-induced risks and volatilities in crop supply. Environmental Research: Food Systems. https://doi.org/10.1088/2976-601X/ad7d12 Thrasher, B., Wang, W., Michaelis, A., Melton, F., Lee, T., & Nemani, R. (2022). NASA global daily downscaled projections, CMIP6. Scientific Data, 9(1), 262. https://doi.org/10.1038/s41597-022-01393-4

Climate Change↗
NASA NTRS1970

Effect of filtering on noise and timing in nuclear particle detection

The relations between signal shaping, noise, and timing resolution in nuclear particle detection systems are examined in this paper. Mathematical analysis of five commonly used types of filters leads to numerical results for system noise components arising from sources in the preamplifier, detector, and bias resistors. These results are presented in the form of design curves for the various filters, showing the dependence of each output noise component on both the magnitude of the noise sources and the filter time constants. Three of the filters considered are simple RC types; the remaining two are combinations of delay lines and RC elements. The quantitative calculations specifically assume a silicon detector and a field-effect-transistor preamplifier. Those filters that exhibit bipolar step response are analyzed in terms of crossover timing resolution, based on the earlier noise calculations. Again, the results are summarized in sets of design curves for each filter. Finally, the comparative performance of the various filter types is discussed, and specific examples are given.

Gary, S. A.↗
NASA NTRS1973

Transmitter and receiver antenna gain analysis for laser radar and communication systems

A comprehensive and fairly self-contained study of centrally obscured optical transmitting and receiving antennas is presented and is intended for use by the laser radar and communication systems designer. The material is presented in a format which allows the rapid and accurate evaluation of antenna gain. The Fresnel approximation to scalar wave theory is reviewed and the antenna analysis proceeds in terms of the power gain. Conventional range equations may then be used to calculate the power budget. The transmitter calculations, resulting in near and far field antenna gain patterns, assumes the antenna is illuminated by a laser operating in the fundamental cavity mode. A simple equation is derived for matching the incident source distribution to a general antenna configuration for maximum on-axis gain. An interpretation of the resultant gain curves allows a number of auxiliary design curves to be drawn which display the losses in antenna gain due to pointing errors and the cone angle of the outgoing beam as a function of antenna size and central obscuration. The use of telescope defocusing as an approach to spreading the beam for target acquisition is compared to some alternate methods.

Klein, B. J.↗
NASA NTRS1979

Scattering and distortion of the unsteady motion on transversely sheared mean flows

It is shown that the pressure and velocity fluctuations of the unsteady motion on a transversely sheared mean flow can be expressed entirely in terms of the derivatives of two potential functions. One of these is a convected quantity that can be specified as a boundary condition and is related to a transverse component of the upstream velocity field. The other can be determined by solving an inhomogeneous wave equation whose source term is also a convected quantity that can be specified as a boundary condition in any given problem. The general theory is used to study the interaction of an unsteady flow with a semi-infinite plate embedded in a shear layer. The acoustic field produced by this interaction is calculated in the limits of low and high frequency. The results are compared with experimental one-third octave sound pressure level radiation patterns. The agreement is found to be excellent, especially in the low frequency range, where the mean-flow and convective effects are shown to have a strong influence on the directivity of the sound.

Goldstein, M. E.↗
NASA NTRS1991

Progress in the development of PDF turbulence models for combustion

A combined Monte Carlo-computational fluid dynamic (CFD) algorithm was developed recently at Lewis Research Center (LeRC) for turbulent reacting flows. In this algorithm, conventional CFD schemes are employed to obtain the velocity field and other velocity related turbulent quantities, and a Monte Carlo scheme is used to solve the evolution equation for the probability density function (pdf) of species mass fraction and temperature. In combustion computations, the predictions of chemical reaction rates (the source terms in the species conservation equation) are poor if conventional turbulence modles are used. The main difficulty lies in the fact that the reaction rate is highly nonlinear, and the use of averaged temperature produces excessively large errors. Moment closure models for the source terms have attained only limited success. The probability density function (pdf) method seems to be the only alternative at the present time that uses local instantaneous values of the temperature, density, etc., in predicting chemical reaction rates, and thus may be the only viable approach for more accurate turbulent combustion calculations. Assumed pdf's are useful in simple problems; however, for more general combustion problems, the solution of an evolution equation for the pdf is necessary.

Hsu, Andrew T.↗
DOE OSTI2021

Evaluation of Oxygen Consumption as a Sensitive Measure of Electrical Cable Polymer Insulation Degradation

Polymers used as dielectric materials in nuclear grade electrical cables, such as cross-linked polyethylene (XLPE) and ethylene-propylene rubber (EPR), are long-lived and durable. Estimating the decades-long useful service life of polymers experimentally in a feasible timeframe of weeks or months requires greatly accelerated aging in the laboratory at elevated temperatures and/or gamma dose rates. Many limitations of accelerated aging, such as due to artefacts of the process including diffusion limited oxidation and dose rate effects, have been identified that can make accurate lifetime prediction at service conditions challenging. This can be due to differences in degradation mechanisms between rapid and extended aging or to the presence of induction periods during which early aging is undetectable using common metrics of polymer insulation characterization such as tensile elongation at break. Conceptually, an ideal measure of aging would track clearly and predictably with material changes throughout the lifecycle of the evolving material state from early aging through end of useful life. With such a metric accelerated aging could be performed at much milder conditions, conditions closer to those found in long term service, and end of life calculated from the early data. Oxygen consumption has previously been proposed as a sensitive measure of insulation polymer oxidation that might meet such desirable characteristics. In this work, nuclear cable insulation samples of the two most common types, XLPE and EPR, from two of the most sourced manufacturers, RSCC and The Okonite Company, were subjected to gamma irradiation at dose rates of 100, 200, and 300 Gy/hr for up to 42 days at 26°C. The aged samples were used to evaluate oxygen consumption as a sensitive measure of aging for these materials and these conditions. For comparison and validation, the aged samples were also characterized using the more conventional tests of mass change, density, carbonyl index, and yellowness index. For both materials, oxygen consumption during irradiation was found to track consistently with applied dose—oxygen consumption rate was linear with time. Mass change and carbonyl index were also clearly proportional to exposure dose. Yellowness index, a surface sensitive measure, was observed to increase linearly with dose at low exposure levels before plateauing. Sample density was not observed to change under the conditions explored. Oxygen consumption was found to be a particularly sensitive metric to measure the degradation of polymeric cable insulation exposed to radiation. Oxygen consumption was compared to Arrhenius and time-temperature-superposition methods for activation energy calculation using literature date and found to be a useful and viable alternative for lifetime prediction. The techniques developed in this work are anticipated to be valuable in the estimation of insulation aging rates under mild conditions approaching service conditions. Direction comparison of useful life prediction by oxygen consumption with prediction via Arrhenius methodology for thermal aging and existing methods for radiation and combined thermal/radiation aging would serve to further validate this promising approach and refine our understanding of material-specific aging rates.

36 MATERIALS SCIENCE↗
NASA NTRS1974

Stability of partially lined combustors with distributed combustion

An integral method for theoretical evaluation of the stability of confined flows with mass sources is presented. This method is applied to evaluate the effect of partial length acoustic liners on liquid propellant combustors with distributed combustion sources. The combustor is modeled as a right circular cylinder terminated by a multiorifice (constant Mach number) nozzle. The spatial spread of combustion in the chamber is represented by an arbitrary number of pressure sensitive planar mass sources. On the cylindrical periphery of the chamber is an acoustic absorber of arbitrary length, position, and damping capability. Integral equations are developed from the partial differential equations describing the nonsteady flow and are solved iteratively. Results are given in terms of linear neutral stability plots using a pressure sensitive combustion response. Calculations indicate that increasing the axial spread of combustion increases the stability of the combustor and the effectiveness of the absorber. The most effective linear placement appears at the location of greatest combustion concentration.

Baer, M. R.↗
NASA NTRS1977

A computer program for the identification of helicopter impulsive noise sources

A computer program is presented for calculating the source location of implusive noise in helicopters. The program (INSL) is written in FORTRAN for the CDC 7600 computer. Inputs are the rotor operating conditions and the time intervals (T) between rotor 1/rev index and impulsive noises as measured by different microphones. The outputs are the possible noise source locations in terms of rotor radial and azimuthal coordinates. Typical computer time for a run of six microphone measurements is 1.5 sec, and the cost is about 12 cents for the CDC 7600.

Lee, A.↗
DOE OSTI2022

An Assessment of Potential Dose Impacts from External Contamination on Naval Reactors Facility Waste Canisters (Special Analysis)

This Special Analysis (SA) was performed to address a request by Naval Reactors Facility (NRF) Waste Programs for a permanent exception to limits of removable surface contamination on the exterior of waste canisters shipped to the Remote-Handled Low-Level Waste (RHLLW) Disposal Facility as specified in the waste acceptance criteria (WAC) (PLN-5446). The purpose of this SA is to determine if the NRF-requested levels for removable surface contamination on the exterior of all NRF waste canisters is within the bounds of the current performance assessment (PA). This was done by calculating the groundwater all-pathways dose contribution from surface contamination on the exterior of NRF canisters for the following cases: (1) the exteriors of all NRF waste canisters are contaminated to the 10 CFR 835 Appendix D allowable limits in the current WAC, and (2) the exteriors of all NRF waste canisters are contaminated to the limits requested by NRF Waste Programs. Dose impacts for each case were compared to each other and to the all pathways dose for the PA base case. Dose impacts were also compared to the all pathways dose limit specified in DOE O 435.1. A simple assessment of the potential impacts of the increase in surface contamination using the NRF-requested limits on the biotic, air, and inadvertent intruder pathways was also performed. Based on the results of this SA, the increase in canister exterior contamination limits requested by NRF are well within the bounds of the current PA and will not result in a violation of performance objectives. The results also show the increased limits do not reflect or necessitate a fundamental change to the PA conceptual model, nor a change to the way exterior contamination is not included in PA dose calculations. Therefore, it is recommended the NRF request for an exception to the current limits for external surface contamination be accepted and the revised limits for NRF-generated waste canisters be added to the WAC. The monitoring plan will also be revised to identify external canister contamination as a potential mobile source term that may be detected by monitoring earlier than potential releases from waste. The PA, composite analysis (CA), closure plan, and PA/CA maintenance plan do not require revision. Recommendations are also included for inclusion of NRF procedures used to limit water pool radionuclide variability (and thus canister surface contamination variability) to the waste generator certification process.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2012

Multi-decadal Change of Atmospheric Aerosols and their Effect on Surface Radiation

We present an investigation on multi-decadal changes of atmospheric aerosols and their effects on surface radiation using a global chemistry transport model GOCART along with the near-term to long-term data records. We focus on a 28-year time period of satellite era from 1980 to 2007 during which a suite of aerosol data from satellite observations, ground-based measurements, and intensive field experiments have become available. Particularly: (1) We compare the model calculated clear sky downward radiation at the surface with surface network data from Baseline Surface Radiation Network (BSRN) and CMA (2) We compare the model and surface data with satellite derived downward radiation products from ISCCP and SRB (3) We analyze the long-term global and regional aerosol trends in major anthropogenic source regions (North America, Europe, Asia) that have been experiencing considerable changes of emissions during the three decades, dust and biomass burning regions that have large interannual variability, downwind regions that are directly affected by the changes in the source area, and remote regions that are considered to representing "background" conditions.

Chin, Mian↗
NASA NTRS1989

Comparison between pressure gradient method and MAC method on high Re calculation

A cavity flow driven by shear and buoyancy forces is used as a test problem in the application of a nonstaggered pressure gradient (PG) method in solving the two-dimensional incompressible Navier-Stokes equations. Twelve finite differencing schemes are used to solve the cavity flow problem. The schemes consist of various combinations of grid arrangements, upwinding treatments, and conservativeness of convection terms. An artificial source term is introduced, and the solutions are compared with those obtained by the conventional marker-and-cell (MAC) method. The comparisons favor the PG method. Numerical results obtained by the twelve schemes are compared with exact solutions in order to assess the stability and accuracy of each scheme.

Tan, C.-H.↗
NASA NTRS1977

Variations in eddy diffusion and associated transport processes

Variation in the eddy diffusion coefficient constitutes a momentum source. This variation near the turbopause affects both the composition and the wind and temperature fields of the thermosphere. Two types of calculations are carried out, for horizontal winds considered self-consistently in a three-dimensional dynamic model and horizontal winds artificially suppressed to simulate a one-dimensional model. Momentum transfer associated with variations in eddy diffusion coefficients represents the source function in the analysis presented. It is shown that for long-term variations in the thermosphere, the compositional dependence on variations in eddy diffusion coefficients can be entirely different in one and three dimensional models with horizontal winds included. Horizontal winds can greatly reduce the effects of eddy diffusion in general and the ratio between He and O amplitudes in particular.

Mayr, H. G.↗
NASA NTRS1984

Radiation properties and emissivity parameterization of high level thin clouds

To parameterize emissivity of clouds at 11 microns, a study has been made in an effort to understand the radiation field of thin clouds. The contributions to the intensity and flux from different sources and through different physical processes are calculated by using the method of successive orders of scattering. The effective emissivity of thin clouds is decomposed into the effective absorption emissivity, effective scattering emissivity, and effective reflection emissivity. The effective absorption emissivity depends on the absorption and emission of the cloud; it is parameterized in terms of optical thickness. The effective scattering emissivity depends on the scattering properties of the cloud; it is parameterized in terms of optical thickness and single scattering albedo. The effective reflection emissivity follows the similarity relation as in the near infrared cases. This is parameterized in terms of the similarity parameter and optical thickness, as well as the temperature difference between the cloud and ground.

Wu, M.-L. C.↗
NASA NTRS2002

Co-Seismic Mass Dislocation and its Effect on Earth's Rotation and Gravity

Mantle processes often involve large-scale mass transport, ranging from mantle convection, tectonic motions, glacial isostatic adjustment, to tides, atmospheric and oceanic loadings, volcanism and seismicity. On very short time scale of less than an hour, co-seismic event, apart from the shaking that is the earthquake, leaves behind permanent (step-function-like) dislocations in the crust and mantle. This redistribution of mass changes the Earth's inertia tensor (and hence Earth's rotation in both length-of-day and polar motion), and the gravity field (in terms of spherical harmonic Stokes coefficients). The question is whether these effects are large enough to be of any significance. In this paper we report updated calculation results based on Chao & Gross (1987). The calculation uses the normal mode summation scheme, applied to nearly twenty thousand major earthquakes that occurred during 1976-2002, according to source mechanism solutions given by the Harvard Central Moment Tensor catalog. Compared to the truly large ones earlier in the century, the earthquakes we study are individually all too small to have left any discernible signature in geodetic records of Earth rotation or global gravity field. However, their collective effects continue to exhibit an extremely strong statistical tendencies. For example, earthquakes conspire to decrease J2 and J22 while shortening LOD, resulting in a rounder and more compact Earth. Strong tendency is also seen in the earthquakes trying to nudge the Earth rotation pole towards approximately 140 degrees E, roughly opposite to the observed polar drift direction. The geophysical significance and implications will be further studied.

Chao, B. F.↗