Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spatiotemporal model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Integrating Maximum Entropy Production Theory and Machine Learning to Improve Global Evapotranspiration Modeling

Accurate estimation of terrestrial evapotranspiration (ET) is vital for understanding global water and energy cycles. However, current global ET estimations are not well constrained. This study introduces an integrated framework combining the Maximum Entropy Production (MEP) theory with Random Forest (RF) model to improve global ET estimation. Specifically, in contrast to direct ET estimation by the RF model, the integrated framework (MEP‐RF) trains to predict error of MEP‐simulated ET. MEP‐RF outperforms RF in spatiotemporal extrapolation. Attribution analysis with in situ observations reveals that the inputs of MEP are the most critical variables for the ET process, including net radiation, vegetated area, soil moisture, and surface temperature. We further drive MEP‐RF with global reanalysis and satellite data sets of these four inputs, yielding a global mean terrestrial ET of 548 mm/year, with 77% attributed to transpiration. The global ET increased at a rate of 0.85 mm/year per year during 2003–2021, primarily due to vegetation greening rather than rising temperature, while decreasing soil moisture led to decreasing regional ET. The integrated framework provides a novel approach for the estimation of global ET without the need for hard‐to‐obtain and thus uncertain inputs, such as wind speed, surface roughness, aerodynamic and canopy stomatal resistance. Therefore, MEP‐RF offers an independent method on existing global ET products. It represents a promising physically based approach that can be incorporated into Earth System Models to enhance water and energy cycle simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Analysis of Seismic Signals Generated by Vehicle Traffic with Application to Derivation of Subsurface Q-Values

Correct identification and modeling of anthropogenic sources of ground motion are of considerable importance for many studies, including detection of small earthquakes and imaging seismic properties below the surface. Here, to understand signals generated by common vehicle traffic, we use seismic data recorded by closely spaced geophones normal to roads at two sites on San Jacinto fault zone. To quantify the spatiotemporal and frequency variations of the recorded ground motions, we develop a simple analytical solution accounting for propagation and attenuation of surface waves. The model reproduces well-observed bell-shaped spectrograms of car signals recorded by geophones close to roads, and it can be used to estimate frequency-dependent Q-values of the subsurface materials. The data analysis indicates Q-values of 3–40, for frequencies up to 150 Hz for road-receiver paths at the two examined sites. The derived Q-values are consistent with attenuation factors of surface waves previously obtained with other methods. The analytical results and analysis procedure provide a highly efficient method for deriving Q-values of shallow subsurface materials.

58 GEOSCIENCES↗
DOE OSTI2022

Physics-guided machine learning for improved accuracy of the National Solar Radiation Database

The National Solar Radiation Database (NSRDB) provides high-resolution spatiotemporal solar irradiance data for the entire globe. The NSRDB uses a two-step Physical Solar Model (PSM) to compute the effects of clouds and other atmospheric variables on the solar radiation reaching the surface of the Earth. Physical and optical cloud properties are fundamental inputs to the PSM and are derived from the National Oceanic and Atmospheric Administration's Geostationary Operational Environmental Satellites. This paper describes recent improvements to the NSRDB driven by physics-guided machine learning methods for cloud property retrieval. The impacts of these new methods on the NSRDB irradiance data are validated using an extensive set of ground measurement sites, showing significant improvement for all sites. We report on average, the mean absolute percentage error for global horizontal irradiance and direct normal irradiance show reductions of 2.16 and 3.95 percentage points respectively for all daylight conditions, 5.92 and 17.39 percentage points respectively for cloudy conditions, and 9.00 and 22.59 percentage points respectively for gap-filled cloudy conditions. These new methods will help improve the quality and accuracy of the irradiance and cloud data in the NSRDB.

14 SOLAR ENERGY↗
DOE OSTI2022

Accelerators for Classical Molecular Dynamics Simulations of Biomolecules

Atomistic Molecular Dynamics (MD) simulations provide researchers the ability to model biomolecular structures such as proteins and their interactions with drug-like small molecules with greater spatiotemporal resolution than is otherwise possible using experimental methods. MD simulations are notoriously expensive computational endeavors that have traditionally required massive investment in specialized hardware to access biologically relevant spatiotemporal scales. Our goal is to summarize the fundamental algorithms that are employed in the literature to then highlight the challenges that have affected accelerator implementations in practice. We consider three broad categories of accelerators: Graphics Processing Units (GPUs), Field-Programmable Gate Arrays (FPGAs), and Application Specific Integrated Circuits (ASICs). These categories are comparatively studied to facilitate discussion of their relative trade-offs and to gain context for the current state of the art. We conclude by providing insights into the potential of emerging hardware platforms and algorithms for MD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Sensitivity of meteorological-forcing resolution on hydrologic variables

Projecting the spatiotemporal changes in water resources under a no-analog future climate requires physically based integrated hydrologic models which simulate the transfer of water and energy across the earth's surface. These models show promise in the context of unprecedented climate extremes given their reliance on the underlying physics of the system as opposed to empirical relationships. However, these techniques are plagued by several sources of uncertainty, including the inaccuracy of input datasets such as meteorological forcing. These datasets, usually derived from climate models or satellite-based products, are typically only resolved on the order of tens to hundreds of kilometers, while hydrologic variables of interest (e.g., discharge and groundwater levels) require a resolution at much smaller scales. In this work, a high-resolution hydrologic model is forced with various resolutions of meteorological forcing (0.5 to 40.5 km) generated by a dynamical downscaling analysis from the regional climate model Weather Research and Forecasting (WRF). The Cosumnes watershed, which spans the Sierra Nevada and Central Valley interface of California (USA), exhibits semi-natural flow conditions due to its rare undammed river basin and is used here as a test bed to illustrate potential impacts of various resolutions of meteorological forcing on snow accumulation and snowmelt, surface runoff, infiltration, evapotranspiration, and groundwater levels. Results show that the errors in spatial distribution patterns impact land surface processes and can be delayed in time. Localized biases in groundwater levels can be as large as 5–10 m and 3 m in surface water. Most hydrologic variables reveal that biases are seasonally and spatially dependent, which can have serious implications for model calibration and ultimately water management decisions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Atmospheric teleconnection associated with the Atlantic multidecadal variability in summer: assessment of the CESM1 model

Observational analysis shows that the Atlantic multidecadal variability (AMV) is associated with climate variability in the Northern Hemisphere through a zonal atmospheric teleconnection extending from the North Atlantic Ocean and propagating eastward around the Northern Hemisphere. Here, we studied the fidelity of model simulations in reproducing the observed summer AMV and the associated impacts on the mid-latitude climate by analysing simulations using the National Centre for Atmospheric Research Community Earth System Model Version 1 (CESM1), including CESM1 North Atlantic idealized and pacemaker simulations, CESM1 large ensemble twentieth century uninitialized simulations and large ensemble initialized CESM1 decadal predictions. To further compare the fidelity of CESM1, we also analysed large ensemble simulations from three other models. Our results suggest that the uninitialized large ensemble simulations from all models can produce an AMV time evolution and its regional climate impacts similar to the observations to certain degree. By initializing the observed oceanic condition in decadal prediction simulations, the simulated AMV and its regional impacts are closer to the observed ones than those in uninitialized ensemble simulations. In addition, the pacemaker simulations that nudged the time-evolving observed North Atlantic sea surface temperature anomalies produce spatiotemporal characteristics of the AMV and AMV climate impacts closer to the observed ones than the uninitialized simulations. We conclude that although coupled models can produce AMV and its regional impacts similar to observed, proper initialization and bias correction of the sea surface temperature spatial and temporal structure can improve this capability.

Initialization↗
DOE OSTI2023

CFD modeling of crystallization fouling with CO 2 desorption incorporated for a falling-film evaporator in thermal desalination

Seawater flowing around horizontal tubes in falling-film evaporators is a common configuration for thermal desalination. Heat is transferred from in-tube steam condensation to the shell-side seawater by conduction through the tube wall and scaling layer, and conduction and convection to the evaporating liquid film. CO 2 is simultaneously released from seawater and mixed with the produced vapor. Fouling coupled with CO 2 desorption has deleterious impacts on both evaporation and condensation. The evaluation of spatiotemporal dependent crystallization fouling and CO 2 desorption is vital to selecting optimal operating conditions. Here, in this work, a CO 2 desorption model is integrated into CFD modeling for predictions of coupled heat and mass transfer, to understand and predict scale formation and CO 2 desorption with local and transient profiles of temperature, carbonate species concentrations, pH, and total alkalinity. The porosity of the scale layer is experimentally determined as 67.7% and invoked in the calculation of effective thermal conductivity. The simulation results reveal that high steam temperatures increase seawater total alkalinity and accelerate scale formation. The scale thickness on the bottom tube reaches 0.30 μm and 5.24 μm for steam temperatures of 60 °C and 80 °C, respectively. High salinity leads to a large CO 2 desorption rates. The CO 2 desorption rate increases 43% when the seawater salinity increases from 35 to 55 g/kg. The effects of operating conditions on carbonate speciation and pH have been compared and analyzed. This model can serve as a comprehensive tool for the design of thermal desalination systems and optimal operation.

42 ENGINEERING↗
DOE OSTI2020

What can we learn from N 2 O isotope data? – Analytics, processes and modelling

The isotopic composition of nitrous oxide (N 2 O) provides useful information for evaluating N 2 O sources and budgets. Due to the co–occurrence of multiple N 2 O transformation pathways, it is, however, challenging to use isotopic information to quantify the contribution of distinct processes across variable spatiotemporal scales. Here, we present an overview of recent progress in N 2 O isotopic studies and provide suggestions for future research, mainly focusing on: analytical techniques; production and consumption processes; and interpretation and modelling approaches. Comparing isotope–ratio mass spectrometry (IRMS) with laser absorption spectroscopy (LAS), we conclude that IRMS is a precise technique for laboratory analysis of N 2 O isotopes, while LAS is more suitable for in situ/inline studies and offers advantages for site–specific analyses. When reviewing the link between the N 2 O isotopic composition and underlying mechanisms/processes, we find that, at the molecular scale, the specific enzymes and mechanisms involved determine isotopic fractionation effects. In contrast, at plot–to–global scales, mixing of N 2 O derived from different processes and their isotopic variability must be considered. We also find that dual isotope plots are effective for semi–quantitative attribution of co–occurring N 2 O production and reduction processes. More recently, process–based N 2 O isotopic models have been developed for natural abundance and 15 N–tracing studies, and have been shown to be effective, particularly for data with adequate temporal resolution. Here, despite the significant progress made over the last decade, there is still great need and potential for future work, including development of analytical techniques, reference materials and inter–laboratory comparisons, further exploration of N 2 O formation and destruction mechanisms, more observations across scales, and design and validation of interpretation and modelling approaches. Synthesizing all these efforts, we are confident that the N 2 O isotope community will continue to advance our understanding of N 2 O transformation processes in all spheres of the Earth, and in turn to gain improved constraints on regional and global budgets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Towards real-time monitoring: data assimilated time-lapse full waveform inversion for seismic velocity and uncertainty estimation

SUMMARY Rapid development of time-lapse seismic monitoring instrumentations has made it possible to collect dense time-lapse data for tomographically retrieving time-lapse (even continuous) images of subsurface changes. While traditional time-lapse full waveform inversion (TLFWI) algorithms are designed for sparse time-lapse surveys, they lack of effective temporal constraint on time-lapse data, and, more importantly, lack of the uncertainty estimation of the TLFWI results that is critical for further interpretation. Here, we propose a new data assimilation TLFWI method, using hierarchical matrix powered extended Kalman filter (HiEKF) to quantify the image uncertainty. Compared to existing Kalman filter algorithms, HiEKF allows to store and update a data-sparse representation of the cross-covariance matrices and propagate model errors without expensive operations involving covariance matrices. Hence, HiEKF is computationally efficient and applicable to 3-D TLFWI problems. Then, we reformulate TLFWI in the framework of HiEKF (termed hereafter as TLFWI-HiEKF) to predict time-lapse images of subsurface spatiotemporal velocity changes and simultaneously quantify the uncertainty of the inverted velocity changes over time. We demonstrate the validity and applicability of TLFWI–HiEKF with two realistic CO2 monitoring models derived from Frio-II and Cranfield CO2 injection sites, respectively. In both 2-D and 3-D examples, the inverted high-resolution time-lapse velocity results clearly reveal a continuous velocity reduction due to the injection of CO2. Moreover, the accuracy of the model is increasing over time by assimilating more time-lapse data while the standard deviation is decreasing over lapsed time. We expect TLFWI-HiEKF to be equipped with real-time seismic monitoring systems for continuously imaging the distribution of subsurface gas and fluids in the future large-scale CO2 sequestration experiments and reservoir management.

58 GEOSCIENCES↗
DOE OSTI2024

Exploring impacts of electricity tariff on charging infrastructure planning: An activity-based approach

In the past decade, electric vehicles (EVs) have gained popularity for their efficiency and environmental benefits. Advances in battery technology and charging equipment have yielded long-range EVs and fast-charging. However, many major cities lack adequate charging infrastructure for daily EV use. This study addresses this gap by integrating activity-based modeling, charging behavior simulation, and charging infrastructure optimization. The research utilizes the POLARIS agent-based transportation model to accurately capture user activities, trip patterns, and traffic flows. Additionally, the study investigates the impact of fixed and spatiotemporal electricity rate distributions on optimal charging infrastructure deployment. The framework is applied to the Chicago regional area network and analyzed under various EV ownership scenarios. Further, the results reveal significant impacts of the charging pricing strategy on user decision-making and charging demand distribution. There is also a need for consistent pricing policies in charging infrastructure planning and operational phases to avoid drops in service quality.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Electrical Resistivity Changes During Heating Experiments Unravel Heterogeneous Thermal‐Hydrological‐Mechanical Processes in Salt Formations

Abstract Rock salt is considered a suitable medium for the permanent disposal of heat‐generating radioactive waste due to its isolation properties. However, excavation damage and heating induce complex and heterogeneous thermal‐hydrological‐mechanical (THM) processes across different zones. Quantifying this heterogeneity is crucial for accurate long‐term performance assessment models, but traditional methods lack the necessary resolution. This study employs 4D electrical resistivity tomography (ERT) monitoring during controlled heating experiments in a salt formation to unravel the spatiotemporal dynamics of THM processes. Advanced time‐lapse inversion and clustering analysis quantify subsurface properties and map the heterogeneity of THM dynamics. The ERT results can estimate subsurface properties and delineate the damaged and intact zones, enabling appropriate parameterization and representation of processes for long‐term modeling. This approach may be used in further improving the predictive models and ensuring the safe long‐term disposal of radioactive waste in rock salt.

58 GEOSCIENCES↗
DOE OSTI2024

Climate change will reduce North American inland wetland areas and disrupt their seasonal regimes

Abstract Climate change can alter wetland extent and function, but such impacts are perplexing. Here, changes in wetland characteristics over North America from 25° to 53° North are projected under two climate scenarios using a state-of-the-science Earth system model. At the continental scale, annual wetland area decreases by ~10% (6%-14%) under the high emission scenario, but spatiotemporal changes vary, reaching up to ±50%. As the dominant driver of these changes shifts from precipitation to temperature in the higher emission scenario, wetlands undergo substantial drying during summer season when biotic processes peak. The projected disruptions to wetland seasonality cycles imply further impacts on biodiversity in major wetland habitats of upper Mississippi, Southeast Canada, and the Everglades. Furthermore, wetlands are projected to significantly shrink in cold regions due to the increased infiltration as warmer temperature reduces soil ice. The large dependence of the projections on climate change scenarios underscores the importance of emission mitigation to sustaining wetland ecosystems in the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Towards physics-inspired data-driven weather forecasting: integrating data assimilation with a deep spatial-transformer-based U-NET in a case study with ERA5

Abstract. There is growing interest in data-driven weather prediction (DDWP), e.g., using convolutional neural networks such as U-NET that are trained on data from models or reanalysis. Here, we propose three components, inspired by physics, to integrate with commonly used DDWP models in order to improve their forecast accuracy. These components are (1) a deep spatial transformer added to the latent space of U-NET to capture rotation and scaling transformation in the latent space for spatiotemporal data, (2) a data-assimilation (DA) algorithm to ingest noisy observations and improve the initial conditions for next forecasts, and (3) a multi-time-step algorithm, which combines forecasts from DDWP models with different time steps through DA, improving the accuracy of forecasts at short intervals. To show the benefit and feasibility of each component, we use geopotential height at 500 hPa (Z500) from ERA5 reanalysis and examine the short-term forecast accuracy of specific setups of the DDWP framework. Results show that the spatial-transformer-based U-NET (U-STN) clearly outperforms the U-NET, e.g., improving the forecast skill by 45 %. Using a sigma-point ensemble Kalman (SPEnKF) algorithm for DA and U-STN as the forward model, we show that stable, accurate DA cycles are achieved even with high observation noise. This DDWP+DA framework substantially benefits from large (O(1000)) ensembles that are inexpensively generated with the data-driven forward model in each DA cycle. The multi-time-step DDWP+DA framework also shows promise; for example, it reduces the average error by factors of 2–3. These results show the benefits and feasibility of these three components, which are flexible and can be used in a variety of DDWP setups. Furthermore, while here we focus on weather forecasting, the three components can be readily adopted for other parts of the Earth system, such as ocean and land, for which there is a rapid growth of data and need for forecast and assimilation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

AGFormer: Adaptive Spatiotemporal graph informed transformer for multi-reservoir inflow forecasting

Accurate reservoir inflow forecasting is crucial for effective water resource management, yet most machine learning models focus on single-reservoir prediction and overlook spatial dependencies among hydrologically connected reservoirs. Here, we propose AGFormer (Adaptive Graph-Informed Transformer), an end-to-end framework that integrates adaptive graph learning with temporal sequence modeling for multi-reservoir inflow forecasting. A shared encoder and graph attention mechanism generate reservoir-specific embeddings, which are then processed by the Transformer-based encoder–decoder for multi-step inflow forecasting. We also introduce a pretraining paradigm to learn robust temporal embeddings from misaligned historical records. Evaluated on 30 reservoirs in the Upper Colorado River Basin, AGFormer achieves superior seven-day-ahead forecasts, with NSE > 0.75 for 20 reservoirs—outperforming Encoder–Decoder LSTM, GCN+LSTM, and Transformer baselines. Adaptive graph learning captures dynamic inter-reservoir dependencies, and feature attribution aligns with snowmelt-driven hydrology. Incorporating forecasted meteorological inputs further enhances accuracy, demonstrating AGFormer’s potential to support reservoir management under dynamic hydrological conditions.

Adaptive graph learning↗
DOE OSTI2023

Microscale spatiotemporal patterns of water, soil organic carbon, and enzymes in plant litter detritusphere

Understanding biophysical and biochemical processes in detritusphere is critical to quantifying and modeling plant residue decomposition dynamics and subsequent soil organic carbon (C) accrual. The objectives of the study were to explore (i) micro-environmental conditions within the detritusphere formed around decomposing corn and soybean leaves, and (ii) the relationships between moisture distribution, enzyme activity, and C dynamics during decomposition. We assessed spatial and temporal dynamics of moisture distribution using X-ray and neutron computed tomography, and activities of β-glucosidase and chitinase, two enzymes involved in soil C and N processing, using zymography. We used 13 C labeled residue to track residue contribution to atmospheric CO 2 and soil organic C. Moisture redistribution pattern varied depending on the residue type. While the water was immediately absorbed by the corn leaves and maintained afterward, switchgrass leaves absorbed water more slowly and created water-deficient zones within ~1mm from the residue. This initial moisture depletion led to lower chitinase activity and residue-derived CO 2 emissions in switchgrass. In contrast to chitinase, β-glucosidase activity was influenced by a combination of vegetation history and residue type, and it was higher when the origin of the residue matched the vegetation history of the soil. Pore size had an opposite impact on the studied enzymes, supporting the notion that contrasting soil pore architecture can stimulate activities of different enzymes through a selection of dominant enzyme producers. We concluded that the decomposition dynamics of plant residues is not only a simple function of residue chemistry, but rather a combined effect of the vegetation history, in part through its effect on microbial community composition, the plant residue chemical and likely physical characteristics, and the soil pore structure in the detritusphere. Together, they create temporally dynamic micro-environmental conditions influencing decomposition. Specifically, our study demonstrated that the initial micro-environment formulated in detritusphere can play an important role in enzyme activities and consequent C dynamics.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Integration of a physics-based direct normal irradiance ($\mathrm{DNI}$) model to enhance the National Solar Radiation Database ($\mathrm{NSRDB}$)

The National Solar Radiation Database (NSRDB) is an extensively used dataset that furnishes satellite-retrieved solar resource data across the United States and an expanding list of other countries. Although the NSRDB uses a physical model to compute global horizontal irradiance (GHI), it currently employs an empirical approach based on surface observations to estimate cloudy-sky direct normal irradiance (DNI). Recently, a new physics-based approach, known as the Fast All-sky Radiation Model for Solar applications with DNI (FARMS-DNI), was developed to improve DNI forecasting. FARMS-DNI integrates direct and scattered solar radiances within the circumsolar region, resulting in improved day-ahead forecasting of DNI by incorporating it into the Weather Research and Forecasting model with Solar extensions (WRF-Solar). This study incorporates FARMS-DNI into the NSRDB algorithm to produce high-spatiotemporal-resolution DNI data from satellite data. The accuracy of the NSRDB based on FARMS-DNI is analyzed using surface observations from 19 sites situated within the National Oceanic and Atmospheric Administration (NOAA) Surface Radiation Budget (SURFRAD) and Solar Radiation (SOLRAD) networks, the University of Oregon (UO) network, the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) network, and at the National Renewable Energy Laboratory (NREL). The results demonstrate that FARMS-DNI reduces the significant overestimation of DNI in the conventional NSRDB at all surface sites, particularly in cloud overcast conditions classified using both satellite retrievals and surface observations. Consequently, this new model can effectively improve the overall accuracy of the NSRDB. The results also suggest that further improvement of DNI estimates at individual time steps, however, requires advanced satellite techniques and precise identification of clouds and retrieval of cloud properties.

14 SOLAR ENERGY↗
DOE OSTI2024

Deep reinforcement learning for optimal control of induction welding process

Optimizing induction welding (IW) process parameters for the application of joining thermoplastic composites is challenging as it requires achieving complex spatiotemporal thermal characteristics along the weld-line to obtain desired weld quality. We formulate an optimal control problem which captures these requirements and seeks to optimize the IW coil speed using a fast-acting dynamic IW process model. We develop a novel Deep Reinforcement Learning (DRL) framework to solve this computationally challenging control problem and demonstrate via simulation study that the learned DRL feedback control policy results in better spatiotemporal thermal characteristics as compared to the current state-of-the-art.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Using feature importance as an exploratory data analysis tool on Earth system models

Abstract. Machine learning (ML) models are commonly used to generate predictions, but these models can also support the discovery of new science. Generating accurate predictions necessitates that a model captures the structure of the underlying data. If the structure is properly extracted, ML could be a useful exploratory and evidential tool. In this paper, we present a case study that demonstrates the use of ML for exploratory data analysis (EDA) in the climate space. We apply the ML explainability method of spatiotemporal zeroed feature importance (stZFI) to understand how climate-variable associations evolve over space and time. Our analyses focus on data from ensembles of Earth system models (ESMs) which provide data on different climate states and conditions. We elect to work with ESM ensembles since they allow us to compare feature importance across alternative scenarios not available with observed data. The ensembles also account for natural variability so that we can distinguish between signal and noise due to natural climate variability when computing feature importance. The use of perturbed initial condition ensembles introduces variability mimicking the natural variability in the atmosphere; thus the signals emerging using feature importance (FI) can be evaluated against the natural variability in the climate system. For our analyses, we consider the 1991 volcanic eruption of Mount Pinatubo, which was a large stratospheric aerosol injection. We explore the climate pathway associated with the eruption from aerosols to radiation to temperature at both the near-surface and stratospheric levels. In addition to applying the method to data generated from two different ESMs, we apply stZFI to reanalysis data to compare the associations identified by stZFI. We show how stZFI tracks the importance of aerosol optical depth over time on forecasting temperatures. This case study illustrates usefulness of an ML tool (stZFI) for EDA on a well-studied climate exemplar.

Ries, Daniel (ORCID:0000000250294647)↗