Search NASA⌕ Search

SEARCH · Search NASA

Results for “Strain tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Optimizing Hybrid-Phase IrO2 Catalysts with Ti for Enhanced Oxygen Evolution Reaction for Proton Exchange Membrane Water Electrolysis

To realize a sustainable energy transition, water electrolysis-particularly proton exchange membrane water electrolysis (PEMWE)-holds significant promise. However, practical deployment is hindered by the cost and instability of the anode catalyst, IrO2. Recent studies indicate that tuning the Ir-O bond distance, via doping or composite formation, is key to enhancing the oxygen evolution reaction (OER) performance of IrO2-based electrocatalysts. Herein, a hybrid-phase Ti-incorporated IrO2 electrocatalyst is developed, exhibiting outstanding OER activity (298.8 mV at 100 mA cm-2) and stability over 25 h. This improvement originates from asymmetric interatomic interactions introduced by Ti, as revealed by combined experimental X-ray analyses and theoretical modeling. Ti incorporation induces tensile strain along the z-axis in IrO2 motifs, effectively reducing the average Ir-O bond distance and thereby enhancing OER activity. In situ X-ray absorption spectroscopy further confirms that at 1.5 V (vs. RHE), the elongated Ir-O bond facilitates -OOH* intermediate formation while suppressing Ir dissolution, contributing to superior stability. These findings underscore the critical role of Ir-O bond engineering in balancing activity and durability, offering strategic insights for the rational design of high-performance OER catalysts for renewable energy technologies.

08 HYDROGEN↗
DOE OSTI2020

Nanometer-Thick Sr 2 IrO 4 Freestanding Films for Flexible Electronics

In this article, we report the structural and optical properties of nanoscale Sr 2 IrO 4 freestanding thin-films fabricated using a water-soluble Sr 3 Al 2 O 6 layer. The coherent lattice structure, phonon modes, two-magnon Raman scattering, and optical absorption spectra of the Sr 2 IrO 4 nanomembrane are analogous to those of the layered iridate epitaxial thin-films and single crystals. Remarkably, the formation of 3-unit-cell-thick SrIrO 3 and interfacial composite layers alleviates the antiphase boundaries at the Sr 2 IrO 4 /Sr 3 Al 2 O 6 interface, resulting in structurally-robust nanomembranes. Our experimental results show that this freestanding thin-film approach of layered oxides can provide techniques for tuning or realizing unprecedented states beyond conventional thin-film methods, suggesting a pathway in achieving flexible layered-oxide electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Chemical Pressure-Derived Assembly Principles for Dodecagonal Quasicrystal Approximants and Other Complex Frank–Kasper Phases

The structures of complex intermetallic compounds can often be interpreted in terms of assemblies of units from simpler parent phases. For example, dodecagonal quasicrystals appear, when viewed down their high-symmetry axes, as plane-filling arrangements of square and triangular tiles corresponding to the Cr 3 Si and Al 3 Zr 4 structure types, respectively. The atomic arrangements and cell-dimensions at the (100) faces of the cells of these structures provide a close geometrical match, which underlies not only dodecagonal quasicrystals and their approximants, but also the much more common σ-phase structure. In this Article, we show that such intergrowth of parent structures can arise from more than just geometrical coincidences, but can be driven by a complementary matching of atomic packing forces. DFT-Chemical Pressure (CP) analysis on elemental versions of the Cr 3 Si and Al 3 Zr 4 types reveal that in both cases arrays of positive interatomic pressures inhibit the formation of optimal contacts elsewhere in the structures. When they are lined up at the potential Cr 3 Si/Al 3 Zr 4 interfaces, however, positive pressures from the two structures interdigitate rather than coincide, providing the opportunity for the relaxation of strained interatomic contacts. That such relief is afforded by the interfaces is confirmed by CP analysis of the σ-phase (FeCr-type) structure. Building on this scheme, we introduce the CP interface function to represent how the CP features of atoms within a structure impact planes or other surfaces that could serve as interfaces between different structures. Using this function, we then explore how the favorability of interfaces between Cr 3 Si and Al 3 Zr 4 -type units is tuned by partial elemental substitution with Si, as well as their potential matches with Laves phase units. Furthermore, the emerging picture provides an account for features of the quasicrystal approximants Mn 7 VSi 2 and Mn 81.5 Si 18.5 , as well as a framework for approaching intermetallic intergrowth structures more broadly.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Doping Induced Magnetic and Electronic Phase Transitions in the Ferrimagnetic Half-Metallic Mn 4 Al 11 Compound

The future of spintronics and semiconductor applications demands materials with tailored electronic and magnetic properties. Here, this study uses density functional theory to investigate the electronic structure of the half-metallic compound Mn 4 Al 11 under uniaxial strain and in its Ge-substituted derivatives. Strain analysis shows that although the half-metallic band gap collapses under strain beyond −2%, the ferrimagnetic character remains stable. Ge substitution at six inequivalent Al sites in Mn 4 Al 11 results in varying degrees of metallicity and magnetic properties. Substitution at Al═ (000) induces a metal-to-insulator transition with an indirect semiconducting gap of 0.14 eV. Bonding and hybridization analyses reveal that local Mn–Al interactions due to Ge substitution significantly modify the local electronic structure, causing both electronic and magnetic phase transitions. This work highlights the effectiveness of substitutional doping in tuning half-metallicity and magnetic properties in inorganic solids, enabling the design of materials for future technological applications.

alloys↗
DOE OSTI2022

Single pair of Weyl nodes in the spin-canted structure of EuCd 2 As 2

We report time reversal symmetry breaking Weyl semimetals are unique among Weyl materials in allowing the minimal number of Weyl points, thus offering the clearest signatures of the associated physics. Here we present neutron diffraction, density-functional theory, and transport measurement results which indicate that EuCd 2 As 2 , under ambient field, strain, and pressure, is such a material with a single pair of Weyl points. Our work reveals a magnetic structure (magnetic space group C2'/m') with Eu moments pointing along the [210] direction in plane and canted ~ 30° out of plane. Density functional theory calculations using this structure show that the observed canting drastically alters the relevant electronic bands, relative to the in-plane order, leading to a single set of well-defined Weyl points. Furthermore, we find the canting angle can tune the distance of the Weyl points above the Fermi level, with the smallest distance at low canting angles. Finally, transport measurements of the anomalous Hall effect and longitudinal magnetoresistance exhibit properties indicative of a chiral anomaly, thus supporting the neutron scattering and DFT results suggesting EuCd 2 As 2 is close to the ideal situation of the Weyl hydrogen atom.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The influence of cooling rates on strain phase diagrams and domain structures of ferroelectric thin films: A case study of PbTiO 3

Strain engineering has been established as an effective approach to control phase equilibria, domain configurations, and functional properties of ferroelectric thin films. Temperature-strain phase diagrams have been used as powerful tools for providing insights into strain engineering. However, almost all existing phase diagrams established using the phase-field approach assume quenching conditions without considering actual cooling rates during the post-deposition annealing process of ferroelectric thin films. Within this work, we systematically investigate the influence of cooling rates on domain structures and the strain-phase diagram of ferroelectric thin films using phase-field simulations, taking PbTiO 3 thin films as a model system. We found that both the position of phase boundaries in the strain phase diagrams and the domain morphology are significantly influenced by the cooling rates. It is revealed that while the paraelectric-ferroelectric phase boundary remains invariant, the phase boundaries between single-phase and multi-phase regions tend to shift toward the corresponding multi-phase region as the cool rate reduces. Slow cooling generally leads to more ordered domain structures with increased domain size. Using the obtained equilibrium domain structures, we calculated effective thermal conductivities and found significant variations that can be tuned by the cooling rates. In conclusion, this work reveals an underexplored yet critical impact of cooling rates on phase equilibria and domain structures in ferroelectric thin films, which may inspire further fine-tuning of domains and domain walls in low-dimensional ferroelectrics for multifunctional applications.

Domain structures↗
DOE OSTI2020

Vertical Strain-Driven Antiferromagnetic to Ferromagnetic Phase Transition in EuTiO 3 Nanocomposite Thin Films

Three-dimensional (3D) strain induced in self-assembled vertically aligned nanocomposite (VAN) epitaxial films provides an unrivaled method to induce very large strains in thin films. Here, by growing VAN films of EuTiO 3 (ETO)–Eu 2 O 3 (EO) with different EO fractions, the vertical strain was systematically increased in ETO, up to 3.15%, and the Eu–Ti–Eu bond angle along $\langle$111$\rangle$ decreased by up to 1°, leading to a weakening of the antiferromagnetic interactions and switching from antiferromagnetic to ferromagnetic behavior. Our work has shown for the first time that Eu–Ti–Eu superexchange interactions play a key role in determining the magnetic ground state of ETO. Broadly, our work serves as an exemplar to show that multifunctionalities in strong spin–lattice coupling perovskite oxides can be uniquely tuned at the atomic scale using simple VAN structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Material Design Strategies for Recovery of Critical Resources from Water

Population growth, urbanization, and decarbonization efforts are collectively straining the supply of limited resources that are necessary to produce batteries, electronics, chemicals, fertilizers, and other important products. Securing the supply chains of these critical resources via the development of separation technologies for their recovery represents a major global challenge to ensure stability and security. Surface water, groundwater, and wastewater are emerging as potential new sources to bolster these supply chains. Recently, a variety of material-based technologies have been developed and employed for separations and resource recovery in water. Judicious selection and design of these materials to tune their properties for targeting specific solutes is central to realizing the potential of water as a source for critical resources. Here, the materials that are developed for membranes, sorbents, catalysts, electrodes, and interfacial solar steam generators that demonstrate promise for applications in critical resource recovery are reviewed. In addition, a critical perspective is offered on the grand challenges and key research directions that need to be addressed to improve their practical viability.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stoichiometry of the Core Determines the Electronic Structure of Core-Shell III-V/II-VI Nanoparticles.

Recently, III-V quantum dots (QDs) emerged as an environmentally friendly alternative to CdSe; however, they exhibit broader emission spectra and inferior photoluminescence quantum yield. Here, we report a computational study of the optoelectronic properties of InxPz and InxGayPz QDs interfaced with zinc chalcogenide shells. Using density functional theory, we show that fine-tuning the composition of the core is critical to achieving narrow emission lines. We show that core-shell nanoparticles, where the core has the same diameter but different stoichiometries, may absorb and emit at different wavelengths, leading to broad absorption and emission spectra. The value of the fundamental gap of the core-shell particles depends on the ratio between the number of group III and P atoms in the core and is maximized for the 1:1 composition. We also show that the interplay between quantum confinement and strain determines the difference in the electronic properties of III-V QDs interfaced with ZnS or ZnSe shells.

Rusishvili, Mariami↗
DOE OSTI2024

M PX 3 van der Waals magnets under pressure ( M = Mn, Ni, V, Fe, Co, Cd; X = S, Se)

van der Waals antiferromagnets with chemical formula MPX 3 (M = V, Mn, Fe, Co, Ni, Cd; X = S, Se) are superb platforms for exploring the fundamental properties of complex chalcogenides, revealing their structure-property relations and unraveling the physics of confinement. Pressure is extremely effective as an external stimulus, able to tune properties and drive new states of matter. In this review, we summarize experimental and theoretical progress to date with special emphasis on the structural, magnetic, and optical properties of the MPX 3 family of materials. Under compression, these compounds host inter-layer sliding and insulator-to-metal transitions accompanied by dramatic volume reduction and spin state collapse, piezochromism, possible polar metal and orbital Mott phases, as well as superconductivity. Some responses are already providing the basis for spintronic, magneto-optic, and thermoelectric devices. We propose that strain may drive similar functionality in these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Tuning structural, transport, and magnetic properties of epitaxial SrRu O 3 through Ba substitution

The perovskite ruthenates (A RuO 3 , A=Ca, Ba, or Sr) exhibit unique properties owing to a subtle interplay of crystal structure and electronic-spin degrees of freedom. Here, in this study, we demonstrate an intriguing continuous tuning of crystal symmetry from orthorhombic to tetragonal (no octahedral rotations) phases in epitaxial SrRuO 3 achieved via Ba substitution (Sr 1-x Ba x RuO 3 with 0 ≤ x ≤ 0.7 ). An initial Ba substitution to SrRuO 3 not only changes the ferromagnetic properties, but also tunes the perpendicular magnetic anisotropy via flattening the Ru–O–Ru bond angle (to 180°), resulting in the maximum Curie temperature and an extinction of RuO 6 rotational distortions at x≈0.20. For x ≤ 0.2, the reduction of RuO 6 octahedral rotational distortion dominantly enhances the ferromagnetism in the system, though competing with the effect of the RuO 6 tetragonal distortion. Further increasing Ba substitution (x > 0.2) gradually enhances the tetragonal-type distortion, resulting in the tuning of Ru-4d orbital occupancy and suppression of ferromagnetism. Our results demonstrate that isovalent substitution of the A-site cations significantly and controllably impacts both electronic and magnetic properties of perovskite oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Rationalization of promoted reverse water gas shift reaction by Pt 3 Ni alloy: Essential contribution from ensemble effect

Bimetallic alloys have attracted considerable attention due to the tunable catalytic activity and selectivity that can be different from those of pure metals. Here, we study the superior catalytic behaviors of the Pt 3 Ni nanowire (NW) over each individual, Pt and Ni NWs during the reverse Water Gas Shift (rWGS) reaction, using density functional theory. The results show that the promoted rWGS activity by Pt3Ni strongly depends on the ensemble effect (a particular arrangement of active sites introduced by alloying), while the contributions from ligand and strain effects, which are of great importance in electrocatalysis, are rather subtle. As a result, a unique Ni–Pt hybrid ensemble is observed at the 110/111 edge of the Pt 3 Ni NW, where the synergy between Ni and Pt sites is active enough to stabilize carbon dioxide on the surface readily for the rWGS reaction but moderate enough to allow for the facile removal of carbon monoxide and hydrogenation of hydroxyl species. Furthermore, our study highlights the importance of the ensemble effect in heterogeneous catalysis of metal alloys, enabling selective binding–tuning and promotion of catalytic activity.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Alteration of phycobilisome excitation energy transfer properties in response to attenuations in peripheral electron flow

In Synechocystis sp. PCC 6803 ( S . 6803), two types of phycobilisome (PBS) complexes, CpcG-PBS and CpcL-PBS, function to harvest light energy for photosynthetic reaction centers (RCs), photosystem I (PSI) and photosystem II (PSII). The compositional differences between these two forms of PBS and their specificity for RCs have led to suggestions that they may differ in function. To address this question, we examined how PBS-RC interactions, and the transfer of excitation energy from PBS to RCs, might be adjusted under conditions where electron demand and photon availability are modulated. The CpcG-PBS, CpcL-PBS, and RC complexes were isolated from a S . 6803 strain defective in expression of flavodiiron 1 (oxygen reduction reaction 1, ORR1) grown under varied light regimes. The energy transfer preference from CpcL-PBS to either PSI or PSII was investigated by in vitro crosslinking and 77 K fluorescence emission spectroscopy to assess energy transfer efficiency under photoexcitation. While the results demonstrate that the transfer of excitation energy from CpcL-PBS favors PSI over PSII in WT strains as previously shown, the preference of CpcL-PBS switches from PSI to PSII in ORR1 strains. Surprisingly, this change in preference was reproduced when ORR1 CpcL-PBS was crosslinked with WT RCs, or when WT CpcL-PBS was cross-crosslinked with ORR1 RCs, indicating there are physical modifications to both PBS and RCs that mediate the preference switch. In contrast, the analysis with ORR1 CpcG-PBS shows similar preferences to WT. Additionally, PBS populations in ORR1 shifted to a greater proportion of CpcL-PBS relative to CpcG-PBS. These results demonstrate that under conditions where electron utilization changes, there is a tuning of the excitation energy allocation from CpcL-PBS to RCs to manage the energy distribution for photosynthesis under dynamic flux conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Tuning Phase Purity in Chiral 2D Perovskites

The introduction of chiral organic spacers in low-dimensional metal-halide perovskites triggers chiroptical activity, which is appealing for spintronic applications. However, a comprehensive understanding of structure formation and the ability to control phase purity in such materials have yet to be developed. Herein, the impact of processing conditions on the phase purity, microstructure, and chiroptical properties of chiral 2D perovskites is explored. The anisotropic emergence of a 1D perovskite inside the 2D matrix and its dependence on the organic cation chirality, solvent, and thermal annealing conditions are shown. By controlling these parameters, the in-plane conductivity of the films is nearly doubled. Furthermore, it is demonstrated, for the first time, that solvent choice and the spatial configuration of the organic cation can have an impact on the residual lattice strain and the energetic disorder of the system. The fundamentals presented here can help to improve the film deposition methods for low-dimensional chiral perovskites, offering strategies to control phase purity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In situ visualisation of zeolite anisotropic framework flexibility during catalysis

Zeolites exhibit framework flexibility driving their chemical and catalytic properties. Since the zeolitic pores are extremely small, a slight strain generated in the crystal induces compelling changes in shape, connectivity, accessibility, and the framework chemical properties. These modifications affected the adsorption and desorption of reactants/products and the diffusion within the channels during reaction. Using in situ 3D Bragg coherent X-ray diffraction imaging, we unveil the dynamics of the zeolite structure during catalysis, contraction and/or expansion of its framework also known as zeolite framework flexibility. Here, we imaged three-dimensionally a single faujasite zeolite crystal during the ethanol dehydration reaction revealing anisotropic lattice dynamics simultaneously to guest molecules formation. Understanding zeolite flexibility could permit to tune zeolites properties towards potentially higher adsorption and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Achieving high tensile strength and ductility in refractory alloys by tuning electronic structure

The energy efficiency of heat engines (gas and steam turbines) for electricity production and propulsion is determined by the Carnot cycle and scales with operating temperature. Commercial nickel- and cobalt-based superalloys melt near 1,500 °C and rapidly lose mechanical strength beyond 1,000 °C. Refractory metals melt well above 2,000 °C but have inherent manufacturability challenges that are barriers to adoption, such as high ductile-to-brittle transition temperatures. Using density functional theory-guided design, we demonstrate tailored local lattice distortions that promote phase-stable, non-equiatomic refractory concentrated solid solutions with both high ductility and strength. Here, we exemplify this for single-phase, body-centred cubic Nb 4 Ta 4 V 3 Ti that exhibits castability, excellent room-temperature tensile yield strength (∼1 GPa) and ductility (approaching 20% uniform strain), and exceptional high-temperature tensile strength (500 MPa at 1,000 °C). These findings illustrate a path for designing materials that hold great potential for advancing next-generation technologies such as Generation IV fission reactors, first-generation fusion-plasma reactors, and more efficient gas turbines for electricity generation and propulsion.

DFT↗
DOE OSTI2025

Tuning of electronic properties in highly lattice-mismatched epitaxial SmN

Here, we establish the relationship between native N vacancies, introduced through varying growth parameters, and the structural and transport properties in SmN thin films grown via molecular beam epitaxy grown on MgO(001). The varying levels of N vacancies introduced by varying the ratio of Sm to N atoms during deposition creates excess carriers that radically transform the electrical behavior of the film, over a range of five orders of magnitude, from highly resistive to highly conductive, and unlocking a phase transition evidenced by the presence of a ferromagnetic feature in resistivity. X-ray photoelectron spectroscopy results show that this effect is much less pronounced when varying the available nitrogen species. These samples retain a highly crystal quality despite being grown on a substrate with a lattice mismatch of 20%, alleviating the strain by forming a highly strained SmO oxide layer. The integration between SmN and several transition metal nitride compounds has the potential to unlock new architectures for Josephson junction devices.

36 - MATERIALS SCIENCE↗
DOE OSTI2020

Measurements of elastoresistance under pressure by combining in-situ tunable quasi-uniaxial stress with hydrostatic pressure

Uniaxial stress, as well as hydrostatic pressure are often used to tune material properties in condensed matter physics. Here, we present a setup which allows for the study of the combined effects of quasi-uniaxial stress and hydrostatic pressure. Following earlier designs for measurements under finite stress at ambient pressure (e.g., Chu et al., Science 337, 710 (2012)), the present setup utilizes a piezoelectric actuator to change stress in situ inside the piston-cylinder pressure cell. We show that the actuator can be operated over the full temperature (from 30 K up to 260 K) and pressure range (up to ≈ 2 GPa), resulting in a clear and measurable quasi-uniaxial strain. To demonstrate functionality, measurements of the elastoresistance (i.e., the change of resistance of a sample as a response to quasi-uniaxial strain) under finite hydrostatic pressure on the iron-based compound BaFe 2 As 2 are presented as a proof-of-principle example, and discussed in the framework of electronic nematicity. Overall, this work introduces the combination of in situ tunable quasi-uniaxial stress and large (up to ≈ 2 GPa) hydrostatic pressure as a powerful combination in the study of novel electronic phases. In addition, it also points towards further technical advancements which can be made in the future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗