Search NASA⌕ Search

SEARCH · Search NASA

Results for “Supersonic flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Combined, nonlinear aerodynamic and structural method for the aeroelastic design of a three-dimensional wing in supersonic flow

An iterative procedure for the static aeroelastic design of a flexible wing at supersonic speeds has been developed. The procedure combines a nonlinear, full-potential solver (NCOREL) with an equivalent plate structural analysis method. The NCOREL method yields significantly improved aerodynamic estimates compared to linear theory. The equivalent plate structural analysis method demonstrates an order of magnitude reduction in computer memory and execution time compared to finite-element methods. A highly swept wing is analyzed at high lift using this aeroelastic procedure. The results indicate that the wing deforms favorably due to aerodynamic loading and, consequently, that the inviscid drag levels do not vary at the required lift coefficient although the angle of attack varies significantly. A sensitivity analysis of the type required for optimization studies was also performed with the aeroelastic design procedure.

Pittman, J. L.↗
NASA NTRS2003

On the Scaling Laws for Jet Noise in Subsonic and Supersonic Flow

The scaling laws for the simulation of noise from subsonic and ideally expanded supersonic jets are examined with regard to their applicability to deduce full scale conditions from small-scale model testing. Important parameters of scale model testing for the simulation of jet noise are identified, and the methods of estimating full-scale noise levels from simulated scale model data are addressed. The limitations of cold-jet data in estimating high-temperature supersonic jet noise levels are discussed. It is shown that the jet Mach number (jet exit velocity/sound speed at jet exit) is a more general and convenient parameter for noise scaling purposes than the ratio of jet exit velocity to ambient speed of sound. A similarity spectrum is also proposed, which accounts for jet Mach number, angle to the jet axis, and jet density ratio. The proposed spectrum reduces nearly to the well-known similarity spectra proposed by Tam for the large-scale and the fine-scale turbulence noise in the appropriate limit.

Vu, Bruce↗
NASA NTRS2008

On the Scaling Laws and Similarity Spectra for Jet Noise in Subsonic and Supersonic Flow

The scaling laws for the simulation of noise from subsonic and ideally expanded supersonic jets are reviewed with regard to their applicability to deduce full-scale conditions from small-scale model testing. Important parameters of scale model testing for the simulation of jet noise are identified, and the methods of estimating full- scale noise levels from simulated scale model data are addressed. The limitations of cold-jet data in estimating high-temperature supersonic jet noise levels are discussed. New results are presented showing the dependence of overall sound power level on the jet temperature ratio at various jet Mach numbers. A generalized similarity spectrum is also proposed, which accounts for convective Mach number and angle to the jet axis.

Kandula, Max↗
NASA NTRS1996

Application of Doppler Global Velocimetry to Supersonic Flows

The design and implementation of Doppler Global Velocimetry (DGV) for testing in the Langley Unitary Plan Wind Tunnel is presented. The discussion begins by outlining the characteristics of the tunnel and the test environment, with potential problem areas highlighted. Modifications to the optical system design to implement solutions for these problems are described. Since this tunnel entry was the first ever use of DGV in a supersonic wind tunnel, the test series was divided into three phases, each with its own goal. Phase I determined if condensation provided sufficient scattered light for DGV applications. Phase II studied particle lag by measuring the flow about an oblique shock above an inclined flat plate. Phase III investigated the supersonic vortical flow field above a 75-degree delta wing at 24-degrees angle of attack. Example results from these tests are presented.

Meyers, James F.↗
NASA NTRS1990

The inviscid stability of supersonic flow past a sharp cone

The laminar boundary layer which forms on a sharp cone in a supersonic freestream, where lateral curvature plays a key role in the physics of the problem is considered. This flow is then analyzed from the point of view of linear, temporal, inviscid stability. The basic, non-axisymmetric disturbance equations are derived for general flows of this class, and a so called triply generalized inflexion condition is found for the existence of subsonic neutral modes of instability. This condition is analogous to the well-known generalized inflexion condition found in planar flows, although in the present case the condition depends on both axial and aximuthal wavenumbers. Extensive numerical results are presented for the stability problem at a freestream Mach number of 3.8, for a range of streamwise locations. These results reveal that a new mode of instability may occur, peculiar to flows of this type involving curvature. Additionally, asymptotic analyses valid close to the tip of the cone, far downstream of the cone are presented, and these give a partial (asymptotic) description of this additional mode of instability.

Duck, Peter W.↗
NASA NTRS1953

Laminar boundary layer on cone in supersonic flow at large angle of attack

The laminar boundary-layer flow about a circular cone at large angles of attack to a supersonic stream has been analyzed in the plane of symmetry by a method applicable in general to the flow about conical bodies. At the bottom of the cone, velocity profiles were obtained showing the expected tendency of the boundary layer to become thinner on the under side of the cone as the angle of attack is increased. At the top of the cone, the analysis failed to yield unique solutions except for small angles of attack. Beyond a certain critical angle of attack, boundary-layer flow does not exist in the plane of symmetry, thus indicating separation. This critical angle is presented as a function of Mach number and cone vertex angle.

Moore, Franklin K↗
NASA NTRS1951

A summary of lateral-stability derivatives calculated for wing plan forms in supersonic flow

A compilation of theoretical values of the lateral-stability derivatives for wings at supersonic speeds is presented in the form of design charts. The wing plan forms for which this compilation has been prepared include a rectangular, two trapezoidal, two triangular, a fully-tapered swept-back, a sweptback hexagonal, an unswept hexagonal, and a notched triangular plan form. A full set of results, that is, values for all nine of the lateral-stability derivatives for wings, was available for the first six of these plan forms only. The reasons for the incompleteness of the results available for other plan forms are discussed.

Jones, Arthur L↗
NASA NTRS1978

Numerical solution for supersonic flow near the trailing edge of a flat plate

In the present study, problems of laminar and turbulent two-dimensional flow of a viscous compressible fluid near the trailing edge of a thin flat plate are considered. The complete set of Navier-Stokes equations is solved by the finite-difference method of MacCormack (MacCormack and Baldwin, 1975). It is an explicit, predictor-corrector, time-splitting method of second order acuracy. The computational mesh employed has sufficient resolution for all the characteristic lengths suggested by theory. In the laminar case, the present results are compared with the triple deck solution of Daniels (1974). This comparison indicates that the asymptotic triple deck theory for supersonic trailing edge flow is accurate within five percent for Reynolds numbers greater than 1000. In the turbulent case, the Prandtl-Van Driest-Clauser algebraic eddy viscosity model is used. The numerical results show that the region of upstream influence is approximately of the order of the boundary layer thickness. The solutions for skin-friction, pressure and wake center-line velocity are presented.

Degani, D.↗
NASA NTRS2008

Mach-Number Measurement with Laser and Pressure Probes in Humid Supersonic Flow

Mach-number measurements using a nonintrusive optical technique, laser-induced thermal acoustics (LITA), are compared to pressure probes in humid supersonic airflow. The two techniques agree well in dry flow (-35 C dew point), but LITA measurements show about five times larger fractional change in Mach number than that of the pressure-probe when water is purposefully introduced into the flow. Possible reasons for this discrepancy are discussed.

Herring, G. C.↗
NASA NTRS1985

Measurements of turbulent correlations in supersonic flows with longitudinal surface curvature

The effect of longitudinal surface curvature on the turbulent correlations of a supersonic turbulent boundary layer was studied experimentally in an axisymmetric channel. Upstream of the interaction, the nominal freestream Mach number was 3.78, the Reynolds number based on boundary layer momentum thickness was 5778, and the boundary layer thickness was 0.9 cm. For the flow with the longitudinal surface curvature, the overall turning angle was approximately 10.2 degrees, and maximum delta-j/kappa approximately 0.09. The shear stresses, measured by a hot wire anemometry, reached the peak values quite rapidly for the flow with surface curvature as compared to the corresponding flow without surface curvature.

Chou, J. H.↗
NASA NTRS1976

Mixing and combustion of an underexpanded H2 jet in supersonic flow

Theoretical calculations are compared with experimental data in an investigation of the injection, mixing, and combustion of an underexpanded hydrogen jet in a supersonic test stream. The experimental tests in reacting and nonreacting flows were conducted by use of air and nitrogen as test media. Tests were conducted in a free jet and a ducted mode. Theoretical calculations were performed with a modified viscous characteristics analysis. The computer program employs finite rate chemistry and a turbulent viscosity model which varies radially and axially; it handles exit shock waves, expansion fans, and thermal compressions generated in the reacting flow fields. Comparison of the theory and experimental data indicates good agreement for the near flow field; this agreement is directly related to the explicit handling of the near-field shock and expansion waves. Less satisfactory agreement at downstream locations for both free jet and ducted flows is attributed to the lack of continued computation of the shocks and expansions in the far field.

Jenkins, R. V.↗
NASA NTRS1982

Numerical simulation of steady supersonic flow over spinning bodies of revolution

A recently reported parabolized Navier-Stokes code has been employed to compute the supersonic flowfield about a spinning cone and spinning and nonspinning ogive cylinder and boattailed bodies of revolution at moderate incidence. The computations were performed for flow conditions where extensive measurements for wall pressure, boundary-layer velocity profiles, and Magnus force had been obtained. Comparisons between the computational results and experiment indicate excellent agreement for angles of attack up to 6 deg. At angles greater than 6 deg discrepancies are noted which are tentatively attributed to turbulence modeling errors. The comparisons for Magnus effects show that the code accurately predicts the effects of body shape for the selected models.

Sturek, W. B.↗
NASA NTRS1977

Navier-Stokes solution for the laminar and turbulent supersonic flow near the trailing edge of a flat plate

The present paper deals with problems of two-dimensional laminar and turbulent flow of a viscous incompressible fluid near the trailing edge of a thin flat plate. The complete system of Navier-Stokes equations is solved by means of MacCormack's finite-difference scheme. In the laminar case, the results are compared with the triple deck solution of Daniels (1973). The comparisons indicate that the asymptotic triple deck theory for supersonic trailing-edge flow is accurate within five percent for Reynolds numbers greater than 1000. In the turbulent case, the Prandtl-Van Driest-Clausner algebraic eddy viscosity model is used, showing that the region of upstream influence is roughly of the order of the boundary layer thickness.

Hussaini, M. Y.↗
NASA NTRS1990

Experimental results for film cooling in 2-D supersonic flow including coolant delivery pressure, geometry, and incident shock effects

An experimental program was conducted to establish some design parameters important to a supersonic film cooling system in a scramjet engine. A simple non-combusting two-dimensional flow configuration was used to isolate the film cooling phenomena. Parameters investigated include coolant delivery pressure, slot height and lip thickness, and incident shock location and strength. Design guidelines for use in engineering and trade studies are presented.

Olsen, George C.↗
NASA NTRS1990

Numerical simulation of the compressible Orszag-Tang vortex 2. Supersonic flow

The numerical investigation of the Orszag-Tang vortex system in compressible magnetofluids will consider initial conditions with embedded supersonic regions. The simulations have initial average Mach numbers 1.0 and 1.5 and beta 10/3 with Lundquist numbers 50, 100, or 200. The behavior of the system differs significantly from that found previously for the incompressible and subsonic analogs. Shocks form at the downstream boundaries of the embedded supersonic regions outside the central magnetic X-point and produce strong local current sheets which dissipate appreciable magnetic energy. Reconnection at the central X-point, which dominates the incompressible and subsonic systems, peaks later and has a smaller impact as M increases from 0.6 to 1.5. Similarly, correlation between the momentum and magnetic field begins significant growth later than in subsonic and incompressible flows. The shocks bound large compression regions, which dominate the wavenumber spectra of autocorrelations in mass density, velocity, and magnetic field.

Picone, J. M.↗
NASA NTRS1976

Computation of the inviscid supersonic flow over an external axial corner

A second-order finite-difference procedure is used to evaluate the inviscid supersonic flowfield surrounding an external axial corner composed of swept planar compression surfaces and representing the inlets on existing high-speed aircraft. The governing partial differential equations in conservation-law form are hyperbolic with respect to the axial coordinate and are solved iteratively by means of MacCormack's algorithm. The procedure treats both the peripheral shock wave and vortical singularities as discontinuities. Numerical results are presented for two parametric studies regarding the effects on the flowfield of varying the free-stream Mach number and the leading edge sweep of the horizontal wedge. Results of parametric Mach number study agree with the Mach number independence principle in that as the Mach number increases, such characteristics as shock shape, cross-flow sonic line location, and vortical singularity position approach an asymptote.

Kutler, P.↗
NASA NTRS2001

Transition In Supersonic Flows With Corners

It is proposed to investigate the effect of sudden change in the slope of the surface on the stability and transition onset point in supersonic and hypersonic boundary layers. Since we can not use the linear stability theory in flows where there are discontinuities we have to solve the full Navier-Stokes equations to determine the amplification of the disturbances across the oblique shock which exists at the corner. We will use the Navier-Stokes code which was developed by Dr. Harold Atkins in the aerodynamic and acoustic methods branch. The code is developed using the higher order ENO scheme and is currently set up for two-dimensional flows. In the first year of our investigation, we will investigate the evolution of small amplitude two-dimensional disturbances and determine the N-factors for the most amplified disturbances. We will perform the analysis for the parameter similar to X-31 model and flight experiment conditions. From these computation we will infer what is the maximum amplification rate possible in quite environments without any tripping devices. In the second part of the investigation, we will perform nonlinear computations to determine what is the minimum amplitudes necessary to cause the transition at a designed location. In the third part, we have to determine what kind of trip devices necessary to excite the required disturbances. The principal investigator of this project is Dr. P. Balakumar, Associate Professor of Department of Aerospace Engineering, Old Dominion University. We will actively collaborate with research scientists in the Aero-Thermodynamics Branch at NASA/Langley Research Center. A half-time graduate student will also participate in the project.

Balakumar, P.↗