Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Velocity surface measurements for ZnO films over /001/-cut GaAs

A potential application for a piezoelectic film deposited on a GaAs substrate is the monolithic integration of surface acoustic wave (SAW) devices with GaAs electronics. Knowledge of the SAW properties of the filmed structure is critical for the optimum design of such devices. In this article, the measurements of the velocity surface, which directly affects the SAW diffraction, on the bare and metallized ZnO/SiO2 or Si3N4/GaAs /001/-cut samples are reported using two different techniques: (1) knife-edge laser probe, (2) line-focus-beam scanning acoustic microscope. Comparisons, such as measurement accuracy and tradeoffs, between the former (dry) and the latter (wet) method are given. It is found that near the group of zone axes (110) propagation direction the autocollimating SAW property of the bare GaAs changes into a noncollimating one for the layered structure, but a reversed phenomenon exists near the group of zone axes (100) direction. The passivation layer of SiO2 or Si3N4 (less than 0.2 micrometer thick) and the metallization layer change the relative velocity but do not significantly affect the velocity surface. On the other hand, the passivation layer reduces the propagation loss by 0.5-1.3 dB/microseconds at 240 MHz depending upon the ZnO film thickness. Our SAW propagation measurements agree well with theorectical calculations. We have also obtained the anisotropy factors for samples with ZnO films of 1.6, 2.8, and 4.0 micrometer thickness. Comparisons concerning the piezoelectric coupling and acoustic loss between dc triode and rf magnetron sputtered ZnO films are provided.

Kim, Yoonkee↗
NASA NTRS2009

The Habitat Demonstration Unit System Integration

The Lunar Surface System Habitat Demonstration Unit (HDU) will require the project team to integrate a variety of contributions from NASA centers and potential outside collaborators and poses a challenge in integrating these disparate efforts into a cohesive architecture. To accomplish the development of the HDU from conception in June 2009 to rollout for operations in July 2010, the HDU team is using several strategies to mitigate risks and bring the separate efforts together. First, a set of design standards is being developed to define the interfaces between the various systems of HDU and to the payloads, such as the Geology Lab, that those systems will support. Scheduled activities such as early fit-checks and the utilization of a Habitat avionics test bed prior to equipment installation into HDU. A coordinated effort to establish simplified Computer Aided Design standards and the utilization of a modeling and simulation systems will aid in design and integration concept development. Finally, decision processes on the shell development including the assembly sequence and the transportation have been fleshed out early on HDU to maximize the efficiency of both integration and field operations.

Kennedy, Kriss J.↗
NASA NTRS2010

The Habitat Demonstration Unit System Integration

The Lunar Surface System Habitat Demonstration Unit (HDU) will require a project team to integrate a variety of contributions from National Aeronautics and Space Administration (NASA) centers and potential outside collaborators and poses a challenge in integrating these disparate efforts into a cohesive architecture. To accomplish the development of the first version of the HDU, the Pressurized Excursion Module (PEM), from conception in June 2009 to rollout for operations in July 2010, the HDU project team is using several strategies to mitigate risks and bring the separate efforts together. First, a set of design standards is being developed to define the interfaces between the various systems of PEM and to the payloads, such as the Geology Laboratory, that those systems will support. Scheduled activities such as early fit-checks and the utilization of a habitat avionics test bed prior to equipment installation into HDU PEM are planned to facilitate the integration process. A coordinated effort to establish simplified Computer Aided Design (CAD) standards and the utilization of a modeling and simulation systems will aid in design and integration concept development. Finally, decision processes on the shell development including the assembly sequence and the transportation have been fleshed out early on HDU design to maximize the efficiency of both integration and field operations.

Gill, Tracy R.↗
NASA NTRS1975

A generalized hyperbolic marching method for chemically reacting 3-D supersonic flow using a splitting technique

A generalized hyperbolic marching method employing a nonorthogonal coordinate system and using a split differencing scheme for calculating steady supersonic flow over aerodynamic shapes is presented. It is a second-order-accurate mixed explicit-implicit procedure that solves the inviscid adiabatic and nondiffusive equations for chemically reacting flow in integral conservation-law form. The relationship between the integral and differential forms of the equations are examined and the relative merits of each discussed. The method admits initial Cauchy data situated on any arbitrary surface and integrates them forward along a general curvilinear coordinate, distorting and deforming the surface as it advances. The chemical kinetics term is split from the convective terms which are themselves dimensionally split, thereby freeing the fluid operators from the restricted step-size imposed by the chemical reactions and increasing the computational efficiency. The accuracy of this splitting technique is analyzed, a sufficient stability criterion is established, and comparisons are made with another method.

Rizzi, A. W.↗
DOE OSTI2023

Vertical Aerosol Profiling during SAIL (VAPS) Field Campaign Report

To more fully address the science goals of the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility’s Surface Atmosphere Integrated Field Laboratory (SAIL) campaign, particularly the key science question of “How strongly do aerosols affect the surface energy and water balance by altering clouds, precipitation, and surface albedo, and how do these impacts vary seasonally?”, our campaign added instrumentation to planned tethered balloon system (TBS) flights in May and July of 2022. A key aspect of aerosol-cloud interactions is understanding cloud condensation nuclei (CCN) and ice nucleating particle (INP) populations, and how they vary seasonally and spatially. Because the interactions between aerosols and clouds is the target of this work, vertical distributions are particularly important to evaluate. Measurements of aerosol at ground level, below-cloud, and in-cloud will allow a better understanding of the airmasses that are feeding cloud-active particles into low- and mid-level clouds. Measurements of INP and aerosol populations often differ between the ground and aloft, with relationships that likely depend on regional and seasonal. Because of this, collocated measurements of aerosol, CCN, and INP, across different seasons, are crucial to reducing uncertainties in relationships between ground-level and cloud-base aerosol populations. Our campaign added online measurements of CCN using a compact CCN counter and offline filter collections for measurement of INP populations to the SAIL campaign TBS flights in May and July of 2022. The CCN instrument, the CloudPuck, flew and successfully collected data for a total of eight flights across both campaign periods. The IcePuck flew for most flights during the same period. Both instruments have continued to be used for other campaign requests in the SAIL domain. Analysis of this data was proposed through a concurrent DOE Atmospheric System Research (ASR) project submission, which was not funded in 2022. A similar proposal, which would involve analysis of the samples and data collected from this campaign, has been resubmitted in 2023 but a funding decision has not yet been made. If the proposal is again declined, we will seek other resources to ensure that this data can be analyzed.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2018

Tactical Surface Metering Procedures and Information Needs for Charlotte Douglas International Airport

NASA has been working with the FAA and aviation industry partners to develop and demonstrate new concepts and technologies that integrate arrival, departure, and surface traffic management capabilities. In the fall of 2017, NASA began deployment of their technologies in a phased manner to assist with the integrated surface and airspace operations at Charlotte Douglas International Airport (Charlotte, NC). Initial technologies included a tactical surface metering tool and data exchange elements between the airline-controlled ramp and Federal Aviation Administration controlled ATC Tower. In this paper, we focus on the procedures associated with the tactical surface metering tool used in the ramp control tower. This tool was first calibrated in Human-In-the-Loop simulations and was further developed when it was used in the operational world. This paper describes the collaborative procedures that the users exercised in their respective operational worlds to enable surface metering and how several metrics were used to improve the metering algorithm.

Human Factors↗
NASA NTRS2017

Evaluation of a Tactical Surface Metering Tool for Charlotte Douglas International Airport via Human-in-the-Loop Simulation

NASA has been working with the FAA and aviation industry partners to develop and demonstrate new concepts and technologies that integrate arrival, departure, and surface traffic management capabilities. In March 2017, NASA conducted a human-in-the-loop (HITL) simulation for integrated surface and airspace operations, modeling Charlotte Douglas International Airport, to evaluate the operational procedures and information requirements for the tactical surface metering tool, and data exchange elements between the airline controlled ramp and ATC Tower. In this paper, we focus on the calibration of the tactical surface metering tool using various metrics measured from the HITL simulation results. Key performance metrics include gate hold times from pushback advisories, taxi-in-out times, runway throughput, and departure queue size. Subjective metrics presented in this paper include workload, situational awareness, and acceptability of the metering tool and its calibration.

Verma, Savita↗
NASA NTRS1976

Split Space-Marching Finite-Volume Method for Chemically Reacting Supersonic Flow

A space-marching finite-volume method employing a nonorthogonal coordinate system and using a split differencing scheme for calculating steady supersonic flow over aerodynamic shapes is presented. It is a second-order-accurate mixed explicit-implicit procedure that solves the inviscid adiabatic and nondiffusive equations for chemically reacting flow in integral conservation-law form. The relationship between the finite-volume and differential forms of the equations is examined and the relative merits of each discussed. The method admits initial Cauchy data situated on any arbitrary surface and integrates them forward along a general curvilinear coordinate, distorting and deforming the surface as it advances. The chemical kinetics term is split from the convective terms which are themselves dimensionally split, thereby freeing the fluid operators from the restricted step size imposed by the chemical reactions and increasing the computational efficiency. The accuracy of this splitting technique is analyzed, a sufficient stability criterion is established, a representative flow computation is discussed, and some comparisons are made with another method.

Rizzi, Arthur W.↗
NASA NTRS1992

Botswana water and surface energy balance research program. Part 1: Integrated approach and field campaign results

The Botswana water and surface energy balance research program was developed to study and evaluate the integrated use of multispectral satellite remote sensing for monitoring the hydrological status of the Earth's surface. Results of the first part of the program (Botswana 1) which ran from 1 Jan. 1988 - 31 Dec. 1990 are summarized. Botswana 1 consisted of two major, mutually related components: a surface energy balance modeling component, built around an extensive field campaign; and a passive microwave research component which consisted of a retrospective study of large scale moisture conditions and Nimbus scanning multichannel microwave radiometer microwave signatures. The integrated approach of both components in general are described and activities performed during the surface energy modeling component including the extensive field campaign are summarized. The results of the passive microwave component are summarized. The key of the field campaign was a multilevel approach, whereby measurements by various similar sensors were made at several altitudes and resolution. Data collection was performed at two adjacent sites of contrasting surface character. The following measurements were made: micrometeorological measurements, surface temperatures, soil temperatures, soil moisture, vegetation (leaf area index and biomass), satellite data, aircraft data, atmospheric soundings, stomatal resistance, and surface emissivity.

Vandegriend, A. A.↗
NASA NTRS2001

Advances in Land Data Assimilation Systems

Assimilation of remotely sensed land surface observations into regional to global scale numerical models have the potential to significantly advance our ability, to assess, understand, and predict surface water, energy, and carbon cycles. This session seeks to assess the state-of-the-art in data assimilation methods for integrating land surface remote sensing and modeling, with a focus on practical applications and techniques. Assimilated land surface variables of interest include (but are not limited to, soil moisture, surface temperature, snowpack, streamflow, vegetation dynamics, and carbon storage. Contributions describing the development of practical land surface data assimilation methods, multivariate land surface data assimilation strategies, evaluation of the required accuracy and resolution of remote sensing observations, the effects of scale, process complexity, and uncertainty on data assimilation, and the optimal treatment of model and observation errors are encouraged.

Houser, Paul R.↗
NASA NTRS1975

Sinusoidal reaction formulation for radiation and scattering from conducting surfaces

A piecewise-sinusoidal reaction technique is proposed for the study of scattering and radiation from perfectly conducting bodies of arbitrary shape. The reaction technique described is a moment method based on the integral equation of an electric field. A theory of sinusoidal reaction formulation for radiation and scattering problems is outlined, in which the scattered field is obtained by integrating the surface currents. Numerical results are presented for the scattering patterns of rectangular plates and corner reflectors and the radiation patterns of corner-reflector antennas.

Wang, N. N.↗
DOE OSTI2026

SAIL Field Campaign X-Band Precipitation Radar Seasonal Surface Hydrometeor Phase Classification Value-Added Product Report

The Surface Atmosphere Integrated Field Laboratory (SAIL) campaign generated an unprecedented, multisensory record of cold-season precipitation in the Upper Colorado River Basin (UCRB). To complement the Surface Quantitative Precipitation Estimation (SQUIRE) snow water equivalent (SWE) product derived from the Colorado State University (CSU) X-band radar, a hydrometeor phase classification data set was developed to systematically identify phase of the near-surface precipitation. The algorithm uses Corrected Moments in Antenna Coordinates (CMAC) fields with semi-supervised classification (SSC) and fuzzy-logic hydrometeor classification (FHC) methods and maps hydrometeor classes to a compact set of phase classes suitable for Quantitative Precipitation Estimation (QPE) and hydrologic applications. We used SQUIRE grid projections to mitigate beam-blockage issues by selecting the near-surface gates for each beam as well as to make it directly usable for the QPE products.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

Delta launch vehicle isogrid structure NASTRAN analysis

Structural analysis applications of NASTRAN to the isogrid structure of the Delta launch vehicle are discussed. Isogrid is a method employed to stiffen the booster cylindrical shell surface by integrally machining ribs and skin from one piece of metal. The ribs are arranged in a repetitive equilateral triangular pattern; this results in a structural surface whose stiffness is orthogonally isotopic. For that structure, both static and general instability buckling analyses are described and the theoretical results are compared to test data. One of the parameters included in the analysis is the effect of pressure loadings on the buckling allowable load. In addition, a description of a supplementary computer program is presented.

Knighton, D. J.↗
NASA NTRS1987

Spacecraft particulate contaminant redistribution

This paper describes analyses that were performed in support of the Hubble Space Telescope (HST)) particulate contamination control effort. The specific problems addressed include extension of available particle removal data to launch acoustic and random vibration conditions, development of an engineering model for transport of suspended particulates by airflow and in the presence of vehicle acceleration, turbulent diffusion, and migration of particulates over vibrating surfaces, and integration of the various models into a code that could be used to generate contamination level estimates for the HST primary mirror and other critical surfaces for the HST mission phases. The overall redistribution calculations were made assuming a specified initial contaminant distribution in terms of MIL STD 1246A levels, and using predicted vibration data for the various HST surfaces and mission phases. As expected, the effects of airflow were found to be significant, particularly for the larger particles. Particles smaller than about 20 microns did not participate appreciably in the redistribution.

Klavins, A.↗
NASA NTRS2006

Demonstrating the Viability and Affordability of Nuclear Surface Power Systems

A set of tasks have been identified to help demonstrate the viability, performance, and affordability of surface fission systems. Completion of these tasks will move surface fission systems closer to reality by demonstrating affordability and performance potential. Tasks include fabrication and test of a 19-pin section of a Surface Power Unit Demonstrator (SPUD); design, fabrication, and utilization of thermal simulators optimized for surface fission' applications; design, fabrication, and utilization of GPHS module thermal simulators; design, fabrication, and test of a fission surface power system shield; and work related to potential fission surface power fuel/clad systems. Work on the SPUD will feed directly into joint NASA MSFC/NASA GRC fabrication and test of a surface power plant Engineering Development Unit (EDU). The goal of the EDU will be to perform highly realistic thermal, structural, and electrical testing on an integrated fission surface power system. Fission thermal simulator work will help enable high fidelity non-nuclear testing of pumped NaK surface fission power systems. Radioisotope thermal simulator work will help enable design and development of higher power radioisotope systems (power ultimately limited by Pu-238 availability). Shield work is designed to assess the potential of using a water neutron shield on the surface of the moon. Fuels work is geared toward assessing the current potential of using fuels that have already flown in space.

Vandyke, Melissa K.↗
NASA NTRS1994

Merging Magellan emissivity and SAR data for analysis of Venus surface dielectric properties

Integration of Magellan datasets for Venus is an important part of characterizing the geology of the surface. We analyze the global average beahvior of radar backscatter and emissivity and find that for incidence angles greater than 30 deg the two parameters can be modeled by the behavior of a single-dielectric surface (epsilon approximately 4.15) with variable roughness. Based on this result, we propse a model which relates the HH backscatter and H-polarized emissivity to values for a relative roughness fraction and dielectric constant.

Campbell, Bruce A.↗
DOE OSTI2022

Electronic structure factors and the importance of adsorbate effects in chemisorption on surface alloys

The chemisorption energy is an integral aspect of surface chemistry, central to numerous fields such as catalysis, corrosion, and nanotechnology. Electronic-structure-based methods such as the Newns-Anderson model are therefore of great importance in guiding the engineering of material surfaces with optimal properties. However, existing methods are inadequate for interpreting complex, multi-metallic systems. Herein, we introduce a physics-based chemisorption model for alloyed transition metal surfaces employing primarily metal d-band properties that accounts for perturbations in both the substrate and adsorbate electronic states upon interaction. Importantly, we show that adsorbate-induced changes in the adsorption site interact with its chemical environment leading to a second-order response in chemisorption energy with the d-filling of the neighboring atoms. We demonstrate the robustness of the model on a wide range of transition metal alloys with O, N, CH, and Li adsorbates yielding a mean absolute error of 0.13 eV versus density functional theory reference chemisorption energies.

36 MATERIALS SCIENCE↗