SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Thank you for attending NASA’s first-ever OneLink Session. During the event you will learn about the Near Space Network, the changes NASA has made to network architecture, the Commercialization, Innovation, and Synergies (CIS) office, and our goals for fostering industry partnerships.
The latest geostationary sensors like GOES 16/17 ABI and Himawari 8/9 AHI provide high frequent observations of the Earth surface with continuously changing solar illumination geometries, which allow us to retrieve the surface Bidirectional Reflectance Distribution Function (BRDF) with dedicated atmospheric correction algorithms like MAIAC (Multi-Angle Implementation of Atmospheric Correction). However, because the viewing geometry of a specific location from the geostationary satellites are fixed, the angular sampling of surface BRDF by GEO (Geostationary Earth Orbit) sensors is far from comprehensive. This study tries to address this issue by exploring a GEO-LEO (Low-Earth-Orbit) synergy, in particular, jointly retrieving surface BRDF parameters with concurrent ABI/AHI and VIIRS top-of-atmosphere (TOA) reflectance for the near-infrared (NIR) band. The NIR band is chosen because the ABI, AHI, and VIIRS instruments have very similar spectral response functions in this band and therefore simplifies the requirements for cross-sensor radiometric calibration. We compile ABI/AHI and VIIRS TOA data with the best quality (cloud-free and low aerosol loading) at chosen AERONET sites. We then run the GeoNEX MAIAC algorithm to retrieve the Ross-Thick-Li-Sparse (RTLS) surface BRDF parameters with or without the AEORNET measured atmospheric aerosol optical depth (AOD) as inputs. The joint retrieval results are considered the best estimate of surface BRDF. We compare the joint BRDF retrievals with the corresponding MAIAC BRDF products, retrieved with ABI/AHI or VIIRS separately, to evaluate their differences. We expect that the jointly retrieved BRDF data are more robust than the standard products and may help us reduce uncertainties in higher-level earth observation satellite products.
The potential benefits of the circular economy (CE) for decarbonization have recently attracted much attention in the academic and grey literature. The department of energy (DOE) industrial decarbonization roadmap highlight that in addition to the four pillars (energy efficiency, electrification, low-carbon fuels, feedstocks, and energy sources, and carbon capture, utilization, and storage (CCUS)) identified in the roadmap, "scenarios [...] will need to be developed that incorporate materials efficiency and circular economy strategies". Moreover, the roadmap identifies hard-to-abate CO2 emissions across the five industrial subsectors included in the analysis (iron & steel, chemical, food & beverage, refining, and cement manufacturing). Thus, additional options to decarbonize the industrial sector, like the CE, could prove beneficial to address those hard-to-abate emissions. Moreover, they may be less costly, require less R&D or incentives, and be more readily adopted than other strategies such as energy efficiency and CCUS. While the Industrial Decarbonization Roadmap includes some CE strategies (e.g., the increasing market share of steel from electric arc furnaces - which incorporate steel scrap), a deeper dive into what role the CE could play in the United States (US) industrial decarbonization is needed. In this work, we present several industrial decarbonization scenarios that incorporate materials efficiency and circular economy strategies for the iron & steel subsector. The scenarios identify barriers (including technical limits and constraints), opportunities, and R&D needs.Moreover, we estimate the contribution of those scenarios to reducing the industrial sector's CO2 emissions and their potential synergies with the Industrial Decarbonization Roadmap's four pillars. Iron & steel manufacturing was responsible for 90 million tons of industrial CO2 emissions in 2020 - 7% of the industrial sector's total process- related emissions. Besides recycling - which presents technical limitations due to trace contaminants - CE strategies on the demand side could lower iron & steel manufacturing emissions (e.g., the development of lighter products or business models that encourage a more intensive use). This study reviews barriers, opportunities, and trade-offs for 5 material efficiency strategies. Many topics explored in the review call for further research.
Abstract Direct carbon fuel cells (DCFCs) are an efficient energy‐conversion technology capable of generating electricity with carbon‐dioxide‐capture chemistry with solid carbon as fuels. The efficiency and performance of DCFCs depend on the kinetics of the carbon oxidation reactions (COR) and the oxygen reduction reactions (ORR), each occurring at anode and cathode, respectively. The limited active sites paired with reduced temperatures greatly decrease the efficiency of the electrochemical reactions. Ultraporous dual‐3D ceramic textiles (dual‐3DCT) are integrated into electrolyte‐supported DCFCs to enhance charge and mass transfer at the electrodes. Improved COR at the anode is achieved by the synergy between the 3DCT NiO–Ce 0.8 Gd 0.2 O 1.95 (GDC) structure and optimal carbon fuel choice. In a comparative study, DCFCs using graphitic carbon (GC) as fuel show the best COR performance when compared to DCFCs utilizing alternative fuels such as carbon black (CB) and activated carbon (AC). The 3DCT Sm 0.5 Sr 0.5 CoO 3‐δ –GDC (SSC–GDC) composite cathode shows electrochemical performance superior to that of the conventional screen‐printed SSC–GDC. A peak power density of 392 mW cm −2 at 600 °C is obtained in a DCFC using the 3DCT‐anode/electrolyte/3DCT‐cathode configuration, an unprecedented value for any reported DCFC as of yet. This points toward promising applications of dual‐3DCT electrodes for reduced‐temperature DCFCs.
Membranes are among the most promising means of delivering increased supplies of fit-for-purpose water, but membrane fouling remains a critical issue restricting their widespread application. Coupling photocatalysis with membrane separation has been proposed as a potentially effective approach to reduce membrane fouling. However, commonly used materials in photocatalysis limit use of low-cost sources such as sunlight due to their large band gaps. There are few examples of in situ photocatalytic self-cleaning of membranes, with removal from the filtration system and ex situ illumination being more common. In this study, a visible-light-activated photocatalytic film prepared by nitrogen doping into the lattice of TiO 2 was deposited on commercial ceramic membranes via atomic layer deposition (ALD). The synergy between membrane separation and redox reactions between organic pollutants and reactive oxygen species (ROS) produced by the visible-light-activated layer offers a possibility for stable and sustainable membrane operation under in situ solar irradiation.
Electrocatalytic two-electron reduction of oxygen is a promising method for producing sustainable H 2 O 2 but lacks low-cost and selective electrocatalysts. Here, the Chevrel phase chalcogenide Ni 2 Mo 6 S 8 is presented as a novel active motif for reducing oxygen to H 2 O 2 in an aqueous electrolyte. Although it has a low surface area, the Ni 2 Mo 6 S 8 catalyst exhibits exceptional activity for H 2 O 2 synthesis with >90% H 2 O 2 molar selectivity across a wide potential range. Chemical titration verified successful generation of H 2 O 2 and confirmed rates as high as 90 mmol H 2 O 2 g cat –1 h –1 . The outstanding activities are attributed to the ligand and ensemble effects of Ni that promote H 2 O dissociation and proton-coupled reduction of O 2 to HOO*, and the spatial effect of the Chevrel phase structure that isolates Ni active sites to inhibit O—O cleavage. The synergy of these effects delivers fast and selective production of H 2 O 2 with high turn-over frequencies of ≈30 s –1 . Additionally, the Ni 2 Mo 6 S 8 catalyst has a stable crystal structure that is resistive for oxidation and delivers good catalyst stability for continuous H 2 O 2 production. The described Ni-Mo6S8 active motif can unlock new opportunities for designing Earth-abundant electrocatalysts to tune oxygen reduction for practical H 2 O 2 production.
Abstract The design principles of acceptor 1 –acceptor 2 copolymers featuring alternating diketopyrrolopyrrole (DPP) and thienopyrrolodione (TPD) moieties are investigated. The investigated series of polymers is obtained by varying the aromatic linker between the two acceptor motifs between thiophene, thiazole, pyridine, and benzene. High electron affinities between 3.96 and 4.42 eV, facilitated by the synergy of the acceptor motifs are determined with optical gaps between 1.37 and 2.02 eV. Grazing incidence wide‐angle X‐ray scattering studies reveal a range of film morphologies after thermal annealing, including face‐on, end‐on and superstructure edge‐on‐like crystallites. Conversely, all materials form thin edge‐on layers on the polymer–air interface, as demonstrated by multi‐elemental near‐edge X‐ray absorption fine‐structure spectroscopy. The benefit of the electron‐deficient linkers thiazole and pyridine is evident: In organic field effect transistors, electron mobilities of up to 4.6 × 10 −2 cm 2 V −1 s −1 are obtained with outstanding on/off current ratios of 5 × 10 5 , facilitated by the absence of detectable hole transport in these materials. Viability for all‐polymer solar cells is assessed in active layer blends with the donor polymer PM6, yielding a maximum average power conversion efficiency of 4.8% and an open circuit voltage above 1 V.
A rare realization of unconventional anomalous Hall effect (UAHE) both below and above the magnetic transition temperature (T C ) in a hexagonal noncentrosymmetric magnet Y 3 Co 8 Sn 4 , using a combined experimental and ab initio calculations. Occurrence of such UAHE is mainly attributed to the reciprocal ($\mathscr{KS}$) topology (i.e., the presence of topological Weyl points at/near the Fermi level), along with some contribution from the topological magnetic texture (at low temperatures), as inferred from the measured field-dependent ac susceptibility. The effect of UAHE on the measured transport behavior however evolves differently with temperature above and below T C = 53 K, suggesting different physical mechanism responsible in the two phases. A unique planar ferrimagnetic ordering is found to be the most stable state with ab-plane as the easy plane below T C . The simulated net magnetization and the moment per Co atom agrees fairly well with the experimentally measured values. A reasonably large anomalous Hall conductivity (AHC) is also observed in both the phases (above and below T C ) of the present compound, which is again not so ubiquitous. In conclusion, the results underscore the family of R 3 Co 8 Sn 4 (R = rare earth) polar magnets as a compelling backdrop for exploring the synergy of magnetism and topological non-trivial electronic states, pivotal for spintronic applications.
Directly converting methane (CH 4 ) into liquid oxygenates (e.g., methanol) can circumvent the cost and engineering limits of natural gas transportation and storage. However, oxygenate yields from CH 4 remain low, and sulfur present in natural gas hinders activity in most catalysts. Here, to overcome these barriers, we employ bulk molybdenum disulfide (MoS 2 ), a low-cost, robust catalyst which selectively produces large quantities of liquid oxygenates (>900 µmol/g cat ∙hr) from methane in the presence of hydroxyl (OH • ) radicals produced from dilute hydrogen peroxide (H 2 O 2 ) at 75°C. Under realistic reaction conditions, MoS 2 partially and reversibly adopts a metastable, more electrically conductive phase (1T’) that can only be observed through in situ structural probes. Herein, we elucidate that redox synergy between H 2 O 2 and MoS 2 produces active OH • radical species that selectively transform CH 4 to surface methoxy species at the gas-solid liquid interface, leading to the unitary production of liquid oxygenate at a rate competitive with more costly precious metal catalysts, without additional catalyst preparation steps.
Potassium (K) metal anodes suffer from a challenging problem of dendrite growth. In this study, it is demonstrated that a tailored current collector will stabilize the metal plating–stripping behavior even with a conventional KPF 6 –carbonate electrolyte. A 3D copper current collector is functionalized with partially reduced graphene oxide to create a potassiophilic surface, the electrode being denoted as rGO@3D–Cu. Potassiophilic versus potassiophobic experiments demonstrate that molten K fully wets rGO@3D–Cu after 6 s, but does not wet unfunctionalized 3D–Cu. Electrochemically, a unique synergy is achieved that is driven by interfacial tension and geometry: the adherent rGO underlayer promotes 2D layer–by–layer (Frank–van der Merwe) metal film growth at early stages of plating, while the tortuous 3D–Cu electrode reduces the current density and geometrically frustrates dendrites. The rGO@3D–Cu symmetric cells and half–cells achieve state–of–the–art plating and stripping performance. Here, the symmetric rGO@3D–Cu cells exhibit stable cycling at 0.1–2 mA cm –2 , while baseline Cu prematurely fails when the current reaches 0.5 mA cm –2 . The half–cells cells of rGO@3D–Cu (no K reservoir) are stable at 0.5 mA cm –2 for 10 000 min (100 cycles), and at 1 mA cm –2 for 5000 min. The baseline 3D–Cu, planar rGO@Cu, and planar Cu foil fails after 5110, 3012, and 1410 min, respectively.
2D perovskite solar cells with high stability and high efficiency have attracted significant attention. A systematical static and dynamic structure investigation is carried out to show the details of 2D morphology evolution. A dual additive approach is used, where the synergy between an alkali metal cation and a polar solvent leads to high-quality 2D perovskite films with sandwich-type structures and vertical phase segregation. Such novel structure can induce high-quality 2D slab growth and reduce internal and surface defects, resulting in a high device efficiency of 16.48% with enhanced continuous illumination stability and improved moisture (55-60%) and thermal (85°C) tolerances. Transient absorption spectra reveal the carrier migration from low n to high n species with different kinetics. An [PbI 6 ] 4- octagon coalescence transformation mechanism coupled with metal and organic cations wrapped is proposed. By solvent vapor annealing, a recrystallization and reorientation of the 2D perovskite slabs occurs to form an ideal structure with improved device performance and stability.
Due to their exceptional catalytic properties for the oxygen reduction reaction (ORR) and other crucial electrochemical reactions, PtCo intermetallic nanoparticle (NP) and single atomic (SA) Pt metal site catalysts have received considerable attention. However, their formation mechanisms at the atomic level during high-temperature annealing processes remain elusive. Furthermore, the thermally driven structure evolution of Pt–Co binary catalyst systems is investigated using advanced in situ electron microscopy, including PtCo intermetallic alloys and single Pt/Co metal sites. The pre-doping of CoN 4 sites in carbon supports and the initial Pt NP sizes play essential roles in forming either Pt 3 Co intermetallics or single Pt/Co metal sites. Importantly, the initial Pt NP loadings against the carbon support are critical to whether alloying to L1 2 -ordered Pt 3 Co NPs or atomizing to SA Pt sites at high temperatures. High Pt NP loadings (e.g., 20%) tend to lead to the formation of highly ordered Pt 3 Co intermetallic NPs with excellent activity and enhanced stability toward the ORR. In contrast, at a relatively low Pt loading (<6 wt%), the formation of single Pt sites in the form of PtC 3 N is thermodynamically favorable, in which a synergy between the PtC 3 N and the CoN 4 sites could enhance the catalytic activity for the ORR, but showing insufficient stability.
Currently, few porous vanadium metal-organic frameworks (V-MOFs) are known and even fewer are obtainable as single crystals, resulting in limited information on their structures and properties. Here this work demonstrates remarkable promise of V-MOFs by presenting an extensible family of V-MOFs with tailorable pore geometry and properties. The synthesis leverages inter-modular synergy on a tri-modular pore-partitioned platform. New V-MOFs show a broad range of structural features and sorption properties suitable for gas storage and separation applications for C 2 H 2 /CO 2 , C 2 H 6 /C 2 H 4 , and C 3 H 8 /C 3 H 6 . The c/a ratio of the hexagonal cell, a measure of pore shape, is tunable from 0.612 to 1.258. Other tunable properties include pore size from 5.0 to 10.9 Å and surface area from 820 to 2964 m 2 g –1 . With C 2 H 2 /CO 2 selectivity from 3.3 to 11 and high uptake capacity for C 2 H 2 from 65.2 to 182 cm 3 g –1 (298K, 1 bar), an efficient separation is confirmed by breakthrough experiments. The near-record high uptake for C 2 H 6 (166.8 cm 3 g –1 ) contributes to the promise for C 2 H 6 -selective separation of C 2 H 6 /C 2 H 4 . The multi-module pore expansion enables transition from C 3 H 6 -selective to more desirable C 3 H 8 -selective separation with extraordinarily high C 3 H 8 uptake (254.9 cm 3 g –1 ) and high separation potential (1.25 mmol g –1 ) for C 3 H 8 /C 3 H 6 (50:50 v/v) mixture.
Abstract The confluence of pervasiveness, bioaccumulation, and toxicity in freshwater contaminants presents an environmental threat second to none. Exemplifying this trifecta, per‐ and polyfluoroalkyl substances (PFAS) present an alarming hazard among the emerging contaminants. State‐of‐the‐art PFAS adsorbents used in drinking water treatment, namely, activated carbons and ion‐exchange resins, are handicapped by low adsorption capacity, competitive adsorption, and/or slow kinetics. To overcome these shortcomings, metal–organic frameworks (MOFs) with tailored pore size, surface, and pore chemistry are promising alternatives. Thanks to the compositional modularity of MOFs and polymer–MOF composites, herein we report on a series of water‐stable zirconium carboxylate MOFs and their low‐cost polymer‐grafted composites as C 8 –PFAS adsorbents with benchmark kinetics and “parts per billion” removal efficiencies. Bespoke insights into the structure–function relationships of PFAS adsorbents are obtained by leveraging interfacial design principles on solid sorbents, creating a synergy between the extrinsic particle surfaces and intrinsic molecular building blocks.
Abstract The quantum spin Hall insulator bismuthene, a two‐third monolayer of bismuth on SiC(0001), is distinguished by helical metallic edge states that are protected by a groundbreaking 800 meV topological gap, making it ideal for room temperature applications. This massive gap inversion arises from a unique synergy between flat honeycomb structure, strong spin orbit coupling, and an orbital filtering effect that is mediated by the substrate. However, the rapid oxidation of bismuthene in air has severely hindered the development of applications, so far confining experiments to ultra‐high vacuum conditions. Intercalating bismuthene between SiC and a protective sheet of graphene, this barrier is successfully overcome. As demonstrated by scanning tunneling microscopy and photoemission spectroscopy, graphene intercalation preserves the structural and topological integrity of bismuthene, while effectively shielding it from oxidation in air. Hereby, hydrogen is identified as the critical process gas that was missing in previous bismuth intercalation attempts. These findings facilitate ex‐situ experiments and pave the way for the development of bismuthene based devices, signaling a significant step forward in the development of next‐generation technologies.
High-entropy alloys (HEAs) are promising candidates for advanced structural applications due to their excellent mechanical properties. Additive manufacturing (AM), with its rapid solidification conditions, enables the creation of unique nonequilibrium microstructures. To fully leverage the synergy between AM and HEAs, understanding how processing affects structure and properties is essential. Here, how solidification rate influences microstructure evolution and phase transformation pathway in laser additively manufactured AlCrFe2Ni2 eutectic HEAs is investigated. By increasing the laser scan speed and hence the solidification rate, distinct solidification modes evolving from coupled eutectic to anomalous eutectic and eventually to single-phase solidification are revealed. These transitions result in distinct microstructures and a wide range of mechanical properties. Thermodynamic modeling and molecular dynamics simulations reveal that low cooling rates allow for sufficient atomic diffusion and phase separation, facilitating coupled eutectic growth. In contrast, rapid cooling suppresses diffusion and destabilizes the solid–liquid interface, promoting anomalous or single-phase solidification. This integrated experimental and computational approach provides a multiscale understanding of solidification mechanisms in HEAs and underscores how kinetic effects can over-ride thermodynamic predictions under nonequilibrium conditions. Furthermore, these results demonstrate that AM can serve as a powerful tool to design HEAs with tailored microstructures and properties.
Abstract Due to their interesting chemical and optical properties, metal nanoclusters are used in various catalytic reactions and in energy conversion. By incorporating thiolate‐protecting ligands, their size and composition can be tuned. Doping these nanoclusters to form single‐atom alloy (SAA) nanoclusters is shown to further enhance these properties as a result from the synergy between the dopant and host atoms. In addition to their optical and chemical properties, SAA nanoclusters also have interesting electronic properties. However, these properties are often underdiscussed when studying SAA nanoclusters. This review provides an overview of representative studies done on the in‐depth understanding of the electronic properties and catalytic activities of Ag‐based and Au‐based thiolate‐protected SAA nanoclusters. The use of density functional theory (DFT), X‐ray absorption spectroscopy, and X‐ray photoelectron spectroscopy are employed to correlate the changes in charge states of thiolate‐protected SAA nanoclusters with their superior catalytic activity versus monometallic nanoclusters. DFT, UV–vis spectroscopy, and voltammetric methods link the changes in molecular energy levels of thiolate‐protected SAA nanoclusters to their enhanced catalytic performance over monometallic nanoclusters.
Abstract Pore size distribution and surface chemistry of bio‐derived (milk) microporous dominated carbon “MDC” is synergistically tuned, allowing for promising carbon capture in a dry CO 2 atmosphere and in mixed H 2 O–CO 2 . The capture capacity is attributed to the synergy of a large total surface area with an ultramicroporous and microporous texture (e.g., S tot 1889 m 2 g −1 , S mic 1755 m 2 g −1 , S ultra 1393 m 2 g −1 ), and a high content of nitrogen and oxygen heteroatom moieties (e.g., 5 at% N, 10.5 at% O). Tailored two‐step low‐temperature pyrolysis‐chemical activation is employed to take advantage of the intrinsic properties of the precursor, allowing for this unusual textural properties‐heteroatoms combination. For example, tested at 1 bar and 295 or 273 K, MDCs adsorb up to 22.0 and 29.4 wt% CO 2 , respectively. MDCs are also tailored to be hydrophobic, with CO 2 /H 2 O adsorption selectivity even after prolonged cycling. Maximum working capacities of 10.8 wt% for pure CO 2 and 3.5 wt% for a flue gas simulant (15% CO 2 , 85% N 2 ) are measured using temperature swing adsorption with dynamic purge gases, while being minimally affected by humid conditions. This work is directly aligned with the United Nation’s Sustainable Development Goal 13, take urgent action to combat climate change and its impacts.