Search NASA⌕ Search

SEARCH · Search NASA

Results for “TEMPERATURE FIELD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Spin Squeezing as a Probe of Emergent Quantum Orders

Nuclear magnetic resonance (NMR) experiments can reveal local properties in materials, but are often limited by the low signal-to-noise ratio. Spin squeezed states have an improved resolution below the Heisenberg limit in one of the spin components, and have been extensively used to improve the sensitivity of atomic clocks, for example [1]. Interacting and entangled spin ensembles with non-linear coupling are a natural candidate for implementing squeezing. Furthermore, we propose measurement of the spin-squeezing parameter that itself can act as a local probe of emergent orders in quantum materials. In particular, we demonstrate how to investigate an anisotropic electric field gradient via its coupling to the nuclear quadrupole moment. While squeezed spin states are pure, the squeezing parameter can be estimated for both pure and mixed states. We evaluate the range of fields and temperatures for which a thermal-equilibrium state is sufficient to improve the resolution in an NMR experiment and probe relevant parameters of the quadrupole Hamiltonian, including its anisotropy.

36 MATERIALS SCIENCE↗

Three-dimensional coupling of electron cyclotron drift instability and ion–ion two stream instability

Electron cyclotron drift instability (ECDI) and ion–ion two stream instability (IITSI) are both kinetic instabilities that can be present in low-temperature, partially magnetized plasmas. The coupling of instabilities in a three-dimensional configuration leads to the existence of more than one unstable roots to the kinetic dispersion relation. In this paper, a generalized method has been developed for numerically evaluating solutions to the three-dimensional dispersion relation for coupled ECDI and IITSI, assuming cold singly and doubly charged ions and a Maxwellian velocity distribution function for the electrons. The present study demonstrates the coupling between ECDI and IITSI that affects the most unstable mode as a function of the wavenumbers in three dimensions and various plasma properties, including the applied electric field, magnetic field, electron temperature, ion velocities, and plasma density. One of the most notable results is that, while the most unstable mode with the largest growth rate is in the direction of the E×B drift in the two-dimensional cases, the most unstable mode for the three-dimensional configuration occurs in the oblique direction between the applied electric field and the E×B drift. Here, this agrees with experimental observations in cross field plasma sources using coherent Thomson scattering.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interaction-expansion inchworm Monte Carlo solver for lattice and impurity models

Multiorbital quantum impurity models with general interaction and hybridization terms appear in a wide range of applications, including embedding, quantum transport, and nanoscience. However, most quantum impurity solvers are restricted to a few impurity orbitals, discretized baths, diagonal hybridizations, or density-density interactions. We generalize the inchworm quantum Monte Carlo method to the interaction expansion, and we explore its application to typical single- and multiorbital problems encountered in investigations of impurity and lattice models. Our implementation generically outperforms bare and bold-line quantum Monte Carlo algorithms in the interaction expansion. For the systems studied here, our implementation remains inferior to the more specialized hybridization expansion and auxiliary field algorithms. So, the problem of convergence to unphysical fixed points, which hampers so-called bold-line methods, is not encountered in inchworm Monte Carlo.

36 MATERIALS SCIENCE↗

Activation Energy for Solder Bond Degradation: Thermal Cycling of Field-aged Modules at Multiple Upper Temperatures

The reliability of solder joints in the solar cell metallization-interconnect system influences the lifetime of photovoltaic modules. Two field-aged modules-one with Sn 62 Pb 36 Ag 2 solder at the solder joints (Solarex MSX 60), and the other with the standard Sn 60 Pb 40 solder (Siemens M55)-were subjected to a modified thermal cycling (TC) test of IEC 61215. Three sections in each module were maintained at 85 degrees C, 95 degrees C, and 105 degrees C during the 15-minute high temperature dwell time. Current equivalent to the module short-circuit current was injected through the module when the chamber temperature was above 25 degrees C to simulate regular field operation. This novel approach aims to induce thermomechanical fatigue (TMF) at the solder joints and intermetallic compound (IMC) formation at the metal/solder interfaces. The activation energy (E a ) for solder bond degradation was calculated based on the series resistance (R s ) increase in TC testing rather than power drop to avoid the effect of confounding variables. Module-level R s increase in MSX 60 module after TC800 cycles and in M55 module after TC400 cycles was 1.22% and 183.7%, respectively. The E a determined for the module with 2wt% Ag is 0.24 eV and for that with the standard solder is 0.27 eV. The solder bond degradation seems to have been driven by TMF rather than IMC formation for both modules.

14 SOLAR ENERGY↗

Lower Temperature Annealing of Vapor Diffused Nb₃Sn for Accelerator Cavities

Nb₃Sn is a next-generation superconducting material for the accelerator cavities with higher critical temperature and superheating field, both twice compared to Nb. It promises superior performance and higher operating temperature than Nb, resulting in significant cost reduction. So far, the Sn vapor diffusion method is the most preferred and successful technique to coat niobium cavities with Nb₃Sn. Although several post-coating techniques (chemical, electrochemical, mechanical) have been explored to improve the surface quality of the coated surface, an effective process has yet to be found. Since there are only a few studies on the post-coating heat treatment at lower temperatures, we annealed Nb₃Sn-coated samples at 800 C - 1000 C to study the effect of heat treatments on surface properties, primarily aimed at removing surface Sn residues. This paper discusses the systematic surface analysis of coated samples after annealing at temperatures between 850 C and 950 C.

43 PARTICLE ACCELERATORS↗

Dark field X-ray microscopy below liquid-helium temperature: The case of NaMnO 2

Dark field X-ray microscopy (DFXM) is an experimental technique employed to investigate material properties by probing their ‘mesoscale,’ or microscale structures, in a bulk-sensitive manner using hard X-rays at synchrotron radiation sources. However, challenges remain when it comes to applications of this technique to examine low-temperature phenomena in quantum materials, which exhibit complex phase transitions at cryogenic temperatures. One such material is NaMnO 2 , which hosts an antiferromagnetic transition at 45 K that is suspected to coincide with local structural transitions from its majority monoclinic phase to nanoscale triclinic domains. Direct observation of local heterogeneities and this effect at low temperatures in NaMnO 2 is an important step in understanding this material and serves as an ideal candidate study for expanding the DFXM experimental design space. This paper details a foundational high-resolution DFXM study, down to liquid-helium temperature and below, conducted to explore phase transitions in NaMnO 2 . In conclusion, the outlined experiment ushers in the evaluation of other functional materials at low temperatures using this technique.

36 MATERIALS SCIENCE↗

Spatially inhomogeneous competition between superconductivity and the charge density wave in YBa 2 Cu 3 O 6.67

The charge density wave in the high-temperature superconductor YBa 2 Cu 3 O 7-x (YBCO) has two different ordering tendencies differentiated by their c-axis correlations. These correspond to ferro- (F-CDW) and antiferro- (AF-CDW) couplings between CDWs in neighbouring CuO 2 bilayers. This discovery has prompted several fundamental questions: how does superconductivity adjust to two competing orders and are either of these orders responsible for the electronic reconstruction? Here we use x-ray diffraction to study YBa 2 Cu 3 O 6.67 as a function of magnetic field and temperature. We show that regions with F-CDW correlations suppress superconductivity more strongly than those with AF-CDW correlations. This implies that an inhomogeneous superconducting state exists, in which some regions show a fragile form of superconductivity. By comparison of F-CDW and AF-CDW correlation lengths, it is concluded that F-CDW ordering is sufficiently long-range to modify the electronic structure. Our study thus suggests that F-CDW correlations impact both the superconducting and normal state properties of YBCO.

36 MATERIALS SCIENCE↗

Quantifying the influence of different biocrust community states and their responses to warming temperatures on soil biogeochemistry in field and mesocosm studies

Biocrusts influence soil biogeochemistry by fixing carbon (C) and nitrogen (N) and through leachate inputs to soils. Functional rates can vary among biocrust community states and in response to edaphic properties, heterotrophic microbial activity, and global change. Using soils and biocrusts from the Colorado Plateau, Utah, USA, we aimed to quantify the influence of early-successional (ES) and late-successional (LS) biocrust community states on soil biogeochemistry. In a field setting, we found soil was less “fertile” under ES than LS biocrust, but ES biocrust had a relative influence 1.3 times greater than LS biocrust on soil fertility. Leachate collected from LS biocrust had, on average, 6 times more organic C and 1.7 times more dissolved N than ES biocrust, but concentrations of phosphorus (P) and inorganic N did not differ among the two biocrust types. Here, to disentangle influences of biocrusts and soil properties on biogeochemical pools, we constructed mesocosms from homogenized soil and left the surface bare or covered with ES or LS biocrust, before assignment to ambient or warmed (+5 °C) temperature treatments for 3 months. Multivariate biogeochemical properties differed among cover types, yet all exhibited losses of P, N, and organic C and nearly half of the biogeochemical variables considered did not differ among cover types. Mesocosms with LS biocrust retained more dissolved N, supported 8 additional, significant correlations among biogeochemical pools of the biocrust and mineral soil layer on average, and lost fewer of these correlations under warming. Overall, while soils under LS biocrusts were more fertile (i.e., had higher nutrient concentrations) than under ES, we did not find evidence implicating leachate as the primary driver of this difference. Biocrust influences on soil fertility were greater when mineral soil nutrients were in lower concentrations, highlighting the value of even incipient biocrusts for dryland functioning.

54 ENVIRONMENTAL SCIENCES↗

Complex paths around the sign problem

The Monte Carlo evaluation of path integrals is one of a few general purpose methods to approach strongly coupled systems. It is used in all branches of physics, from QCD and nuclear physics to the correlated electron systems. However, many systems of great importance (dense matter inside neutron stars, the repulsive Hubbard model away from half filling, and dynamical and nonequilibrium observables) are not amenable to the Monte Carlo method as it currently stands due to the so-called sign problem. Here, a new set of ideas recently developed to tackle the sign problem based on the complexification of field space and the Picard-Lefshetz theory accompanying it is reviewed. The mathematical ideas underpinning this approach, as well as the algorithms developed thus far, are described together with nontrivial examples where the method has already been proved successful. Directions of future work, including the burgeoning use of machine learning techniques, are delineated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface Impedance of Nb$_3$Sn and YBa$_2$Cu$_3$O$_{7-\sigma}$ in High Magnetic Fields

New potential rf applications of superconductors emerged with the need to operate in high dc magnetic fields (up to 16 T) where vortex motion dictates the response: the beam screen coating of the Future Circular Collider (FCC) [1] and haloscopes, i.e. rf cavities for the axions detection [2]. However, very few data are available in the required regimes. We present in this work measurements of the surface impedance Z up to 12 T on bulk Nb₃Sn and YBCO thin films grown by different techniques. The measurements are performed with a dielectric loaded resonator operating at 15 GHz. We obtained the vortex motion resistivity and extracted the high frequency vortex motion parameters [3]: the depinning frequency, the flux-flow resistivity and the pinning constant, as well as their temperature and field dependences. Substantial differences are highlighted in the high frequency pinning properties of the studied materials, providing useful information on possible improvements in view of applications. A comparison with the results obtained in the microwave frequency range at lower fields (up to 1 T) is given.

43 PARTICLE ACCELERATORS↗

Equilibrium field theory of magnetic monopoles in degenerate square spin ice: Correlations, entropic interactions, and charge screening regimes

In this work, we describe degenerate square spin as an ensemble of magnetic monopoles coupled via an emergent entropic field that subsumes the effect of the underlying spin vacuum. We compute their effective free energy, entropic interaction, correlations, screening, and structure factor, and find that they coincide with the experimental ones. Unlike in pyrochlore ices, a dimensional mismatch between real and entropic interactions leads to weak singularities at the pinch points and algebraic correlations at long distances. This algebraic screening can be, however, camouflaged by a pseudoscreening regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancing superconductivity of Y 5 Rh 6 Sn 18 by atomic disorder

Here, we investigate the effect of enhancement of superconducting transition temperature $T_c$ by nonmagnetic atom disorder in the filled skutterudite-related tetragonal Y 5 Rh 6 Sn 18 compound doped with Ca. We documented experimentally that Y 5 Rh 6 Sn 18 and its Ca-doped alloys are electronically inhomogeneous at the nanoscale, when Ca content is smaller than ~1.5 in the Y 5– x Ca x Rh 6 Sn 18 system, while for $\textit{x}$ ≥ 1.5 much stronger chemical phase inhomogeneity is observed with an about 20% volume fraction of the second 3:4:13 cubic phase, which we interpret as a fluctuation of stoichiometry within the bulk sample. Then the enhancement of $T_c$ vs $\textit{x}$ could be modeled by a mechanism proposed in recent theoretical reports for increasing the mean-field transition temperature $T_c$ in the presence of nonmagnetic disorder. The increase in disorder with doping increases the sample inhomogeneity and causes a systematic increase in $T_c$, while for two-phase $\textit{x}$ ≥ 1.5 samples the critical temperature $T^{\star}_c ≈ 2 × T_c$ rapidly increases. Based on band structure calculations performed under pressure, we demonstrate how the change in density of states would affect $T_c$ of Y 5 Rh 6 Sn 18 . We obtained the Grüneisen parameter $γ_G$ larger for the inhomogeneous phase with respect to $γ_G$ of the bulk $T_c$ phase and attribute the enhancement of $T_c$ to larger stiffening of the high-temperature $T^{\star}_c$ phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Critical temperature T c and Pauli limited critical field of Sr 2 RuO 4 : Uniaxial strain dependence

Variations of critical temperature T c and in-plane critical field H c 2 of Sr 2 Ru O 4 under uniaxial stress were recently reported. We compare the strain dependence of T c and H c 2 in various pairing channels ( d wave, extended s wave, and p -wave) with the experimental observations by studying a three-band tight-binding model that includes effects of spin-orbit and Zeeman couplings and a separable pairing interaction. Our study helps narrow down the possibility of pairing channels. The importance of the multiband nature of Sr 2 Ru O 4 is also highlighted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hybrid Additive Manufacturing and Electric Field-Assisted Sintering of High-temperature Heat Exchangers via Sacrificial Channel Molds

A hybrid manufacturing approach, integrating additive manufacturing (AM) with powder methodology via electric field-assisted sintering (EFAS), was developed for the fabrication of high-temperature compact heat exchangers (CHX) from refractory metals. The methodology employed additively manufactured sacrificial channel molds (SCMs) as shapeholders for CHX channels, which were embedded in metal powders using EFAS. Following embedding, the SCMs were chemically dissolved to form the internal channel network. SCMs were fabricated using both digital light processing (DLP) and direct ink writing (DIW) from chemically reactive, calcium-based ceramic feedstocks with varying ratios of Al2O3 reinforcement. The microstructure, phase composition, and dissolution behavior of both as-printed and embedded SCMs were investigated. The shrinkage behavior of the SCMs embedded in refractory metals, as well as the interfacial characteristics between the SCMs and metal matrix, were studied. The results showed that the SCMs containing sufficient chemical reactive ceramics dissolved effectively before and after embedding. The as-printed SCMs retained the phase composition of their feedstocks, but the embedded SCMs containing calcium-based ceramics and Al2O3 exhibited the formation of calcium aluminates due to high temperature exposure during embedding. Most SCMs exhibited a cellular Al2O3 network filled with Ca-rich ceramics. Shrinkage after embedding was strongly dependent on SCM density, with lower density SCMs exhibiting greater shrinkage. A thin SCM-affected zone was observed at the metal matrix surface, characterized by increased porosity compared to the bulk matrix. This effect was attributed to infiltration of the SCM materials into powder particle boundaries under pressure, followed by their removal during dissolution. This study demonstrates the feasibility of manufacturing CHXs from hard-to-process refractory metals for use in harsh environments.

36 - MATERIALS SCIENCE↗

Slow spin dynamics in the hyperhoneycomb lattice [ ( C 2 H 5 ) 3 NH ] 2 Cu 2 ( C 2 O 4 ) 3 revealed by H 1 NMR studies

We report the results of magnetic susceptibility χ and H 1 nuclear magnetic resonance (NMR) measurements on a three-dimensional hyperhoneycomb lattice compound [ ( C 2 H 5 ) 3 NH ] 2 Cu 2 ( C 2 O 4 ) 3 (CCCO). The average value of the antiferromagnetic (AFM) exchange coupling between the Cu 2 + ( S = 1 / 2 ) spins was determined to be J ~ 50 K from the χ measurements. No long-range magnetic ordering has been observed down to T = 50 mK, although NMR lines become slightly broader at low temperatures below 1 K. The broadening of the NMR spectrum observed below 1 K reveals that the Cu spin moments remain at this temperature, suggesting a non-spin-singlet ground state. The temperature and magnetic field dependence of 1 / T 1 at temperatures above 20 K is well explained by paramagnetic thermal spin fluctuations where the fluctuation frequency of Cu 2 + spins is higher than the NMR frequency of the order of megahertz. However, a clear signature of the slowing down of the Cu 2 + spin fluctuations was observed at low temperatures where 1 / T 1 shows a thermally activated behavior. The magnetic field dependence of the magnitude of the spin excitation gap suggests that the magnetic behaviors of CCCO are characterized as an AFM chain at low temperatures.

1-dimensional systems↗

Thermalization from quantum entanglement: Jet simulations in the massive Schwinger model

We investigate the emergence of thermalization in a quantum-field-theoretic model mimicking the production of jets in QCD: the massive lattice Schwinger model coupled to external sources. Specifically, we compute the expectation values of local operators as functions of time and compare them to their thermal counterparts, quantify the overlap between the evolving density matrix and the thermal one, and compare the dynamics of the energy-momentum tensor to predictions from relativistic hydrodynamics. Through these studies, we find that the system approaches thermalization at late times and elucidate the mechanisms by which quantum entanglement drives thermalization in closed field-theoretic systems. Our results show how thermodynamic behavior emerges in real time from unitary quantum dynamics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Spin-lattice coupling in magnetocaloric Gd 5 ( Ge , Si ) 4 alloys by $in$ $situ$ x-ray pair distribution analysis in magnetic field

Here, using in situ x-ray pair distribution analysis in magnetic field, we study the strong spin-lattice coupling in archetypal magnetocaloric Gd 5 (Ge,Si) 4 alloys manifested by the presence of a first order paramagnetic (PM)-to-ferromagnetic (FM) phase transition that can be triggered by either decreasing temperature in zero magnetic field or increasing magnetic field at constant temperature. We find that the coupling arises from the tendency of Gd-(Si,Ge) slabs in the alloys to reversibly slide against each other to both pack closely and couple ferromagnetically. We also find that, locally, the packing of slabs in FM phases induced by decreasing temperature in zero field is different from that in FM phases of the same chemical composition induced by increasing magnetic field isothermally, indicating that temperature and magnetic field are coupled but not necessarily equivalent control variables for triggering phase transitions in strongly correlated systems.

36 MATERIALS SCIENCE↗

An acoustic investigation of the near-surface turbulence on Mars

The Perseverance rover is carrying out an original acoustic experiment on Mars: the SuperCam microphone records the spherical acoustic waves generated by laser sparks at distances from 2 m to more than 8 m. These N-shaped acoustic waves scatter from the multiple local heterogeneities of the turbulent atmosphere. Therefore, large and random fluctuations of sound travel time and intensity develop as the waves cross the medium. The variances of the travel times and the scintillation index (normalized variance of the sound intensity) are studied within the mathematical formalism of the propagation of spherical acoustic waves through thermal turbulence to infer statistical properties of the Mars atmospheric temperature fluctuation field. The comparison with the theory is made by simplifying assumptions that do not include wind fluctuations and diffraction effects. Two Earth years (about one Martian year) of observations acquired during the maximum convective period (10:00–14:00 Mars local time) show a good agreement between the dataset and the formalism: the travel time variance diverges from the linear Chernov solution exactly where the density of occurrence of the first caustic reaches its maximum. Moreover, on average, waves travel faster than the mean speed of sound due to a fast path effect, which is also observed on Earth. To account for the distribution of turbulent eddies, several power spectra are tested and the best match to observation is obtained with a generalized von Karman spectrum with a shallower slope than the Kolmogorov cascade, φ(k)∝(1 + k 2 L 2 ) -4/3 . It is associated with an outer scale of turbulence, L, of 11 cm at 2 m above the surface and a standard deviation of 6 K over 9 s for the temperature. These near-surface atmospheric properties are consistent with a weak to moderate wave scattering regime around noon with little saturation. Overall, this study presents an innovative and promising methodology to probe the near-surface atmospheric turbulence on Mars.

79 ASTRONOMY AND ASTROPHYSICS↗