Search NASA⌕ Search

SEARCH · Search NASA

Results for “THERMODYNAMIC ACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Thermal shallow water models of geostrophic turbulence in Jovian atmospheres

Conventional shallow water theory successfully reproduces many key features of the Jovian atmosphere: a mixture of coherent vortices and stable, large-scale, zonal jets whose amplitude decreases with distance from the equator. However, both freely decaying and forced-dissipative simulations of the shallow water equations in Jovian parameter regimes invariably yield retrograde equatorial jets, while Jupiter itself has a strong prograde equatorial jet. Simulations by Scott and Polvani [“Equatorial superrotation in shallow atmospheres,” Geophys. Res. Lett. 35, L24202 (2008)] have produced prograde equatorial jets through the addition of a model for radiative relaxation in the shallow water height equation. However, their model does not conserve mass or momentum in the active layer, and produces mid-latitude jets much weaker than the equatorial jet. We present the thermal shallow water equations as an alternative model for Jovian atmospheres. These equations permit horizontal variations in the thermodynamic properties of the fluid within the active layer. We incorporate a radiative relaxation term in the separate temperature equation, leaving the mass and momentum conservation equations untouched. Simulations of this model in the Jovian regime yield a strong prograde equatorial jet, and larger amplitude mid-latitude jets than the Scott and Polvani model. For both models, the slope of the non-zonal energy spectra is consistent with the classic Kolmogorov scaling, and the slope of the zonal energy spectra is consistent with the much steeper spectrum observed for Jupiter. We also perform simulations of the thermal shallow water equations for Neptunian parameter values, with a radiative relaxation time scale calculated for the same 25 mbar pressure level we used for Jupiter. These Neptunian simulations reproduce the broad, retrograde equatorial jet and prograde mid-latitude jets seen in observations. The much longer radiative time scale for the colder planet Neptune explains the transition from a prograde to a retrograde equatorial jet, while the broader jets are due to the deformation radius being a larger fraction of the planetary radius.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multilevel Computational Studies Reveal the Importance of Axial Ligand for Oxygen Reduction Reaction on Fe–N–C Materials

The systematic improvement of Fe–N–C materials for fuel cell applications has proven challenging, due in part to an incomplete atomistic understanding of the oxygen reduction reaction (ORR) under electrochemical conditions. Herein, a multilevel computational approach, which combines ab initio molecular dynamics simulations and constant potential density functional theory calculations, is used to assess proton-coupled electron transfer (PCET) processes and adsorption thermodynamics of key ORR intermediates. These calculations indicate that the potential-limiting step for ORR on Fe–N–C materials is the formation of the Fe III –OOH intermediate. They also show that an active site model with a water molecule axially ligated to the iron center throughout the catalytic cycle produces results that are consistent with the experimental measurements. In particular, reliable prediction of the ORR onset potential and the Fe(III/II) redox potential associated with the conversion of Fe III –OH to Fe II and desorbed H 2 O requires an axial H 2 O co-adsorbed to the iron center. The observation of a five-coordinate rather than four-coordinate active site has significant implications for the thermodynamics and mechanism of ORR. Importantly, these findings highlight the importance of solvent–substrate interactions and surface charge effects for understanding the PCET reaction mechanisms and transition-metal redox couples under realistic electrochemical conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Time-reversal symmetry breaking in two-dimensional nonequilibrium viscous fluids

In this work, we study the rheological signatures of departure from equilibrium in two-dimensional viscous fluids with and without internal spin. Under the assumption of isotropy, we provide the most general linear constitutive relations for stress and couple stress in terms of the velocity and spin fields. Invoking Onsager's regression hypothesis for fluctuations about steady states, we derive the Green-Kubo formulas relating the transport coefficients to time-correlation functions of the fluctuating stress. In doing so, we show that one of the nonequilibrium transport coefficients, the odd viscosity, requires time-reversal symmetry breaking in the case of systems without internal spin. However, the Green-Kubo relations for systems with internal spin also show that there is a possibility for nonvanishing odd viscosity even when time-reversal symmetry is preserved. Furthermore, we find that breakdown of equipartition in nonequilibrium steady states results in the decoupling of the two rotational viscosities relating the vorticity and the internal spin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamic complexity of sulfated zirconia catalysts

Here, a series of sulfated zirconia (SZ) catalysts were synthesized by immersion of amorphous zirconium hydroxide in sulfuric acid of various concentrations (1–5 N). Additionally, these samples were fully characterized by X-ray diffraction (XRD), thermogravimetric analysis and mass spectrometry (TGA-MS), and aqueous sulfuric acid immersion and high temperature oxide melt solution calorimetry. We investigated the enthalpies of the complex interactions between sulfur species and the zirconia surface (ΔH SZ ) for the sulfated zirconia precursor (SZP), ranging from -109.46 ± 7.33 (1 N) to -42.50 ± 0.89 (4 N) kJ/mol S. ΔHSZ appears to be a roughly exponential function of sulfuric acid concentration. On the other hand, the enthalpy of SZ formation (ΔH f ), becomes more exothermic linearly as sulfur surface coverage increases, from -147.90 ± 4.16 (2.14 nm -2 ) to -317.03 ± 4.20 (2.29 nm -2 ) kJ/mol S, indicating formation of energetically more stable polysulfate species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A thermodynamic model for C-(N-)A-S-H gel: CNASH{sub s}s. Derivation and validation

The main reaction product in Ca-rich alkali-activated cements and hybrid Portland cement (PC)-based materials is a calcium (alkali) aluminosilicate hydrate (C-(N-)A-S-H) gel. Thermodynamic models without explicit definitions of structurally-incorporated Al species have been used in numerous past studies to describe this gel, but offer limited ability to simulate the chemistry of blended PC materials and alkali-activated cements. Here, a thermodynamic model for C-(N-)A-S-H gel is derived and parameterised to describe solubility data for the CaO–(Na{sub 2}O,Al{sub 2}O{sub 3})–SiO{sub 2}–H{sub 2}O systems and alkali-activated slag (AAS) cements, and chemical composition data for C-A-S-H gels. Simulated C-(N-)A-S-H gel densities and molar volumes are consistent with the corresponding values reported for AAS cements, meaning that the model can be used to describe chemical shrinkage in these materials. Therefore, this model can provide insight into the chemistry of AAS cements at advanced ages, which is important for understanding the long-term durability of these materials.

36 MATERIALS SCIENCE↗

The Kinetics and Thermodynamics of CO2 Capture by Aqueous Ammonia Derived Using Meta-GGA Density Functional Theory and Wavefunction-Based Model Chemistry Methods

A meta GGA-DFT study of CO{sub 2} activation in aqueous ammonia solutions, with an emphasis on the reaction barrier and molecularity, has been undertaken using the M06-2X functional with an augmented triple-zeta split-valence basis set (6-311++G(d,p)). Up to five base molecules were treated explicitly in order to establish the effects of solvent catalysis in the chemical capture process. Aqueous free energies of solvation were determined for optimized reactant and transition structures using SM8/M06-2X/6-311++G(d,p). The concept of the solvent pre-complex as presented by Dixon and coworkers (Nguyen, M. T.; Matus, M. H.; Jackson, V. E.; Ngan, V. T.; Rustad, J. R.; Dixon, D. A. J. Phys. Chem. A 2008, 112, 10386-10398) was exploited to account for the energetics of disruption of the hydrogen-bonding solvent nano-network prior to the CO{sub 2} activation step. Selected gas- and aqueous-phase thermodynamic quantities have also been derived.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of equilibrium CO 2 solubility and thermodynamic models for aqueous 1‐(2‐hydoxyethyl)‐piperidine solution

Abstract 1‐(2‐Hydoxyethyl)‐piperidine (1‐(2HE)‐PP) is a new tertiary amine with desirable properties and can be potentially used to formulate superior absorbents for CO 2 capture. The equilibrium CO 2 solubility of 1‐(2HE)‐PP solution is measured over temperatures from 298 to 333 K, CO 2 partial pressures from 8.1 to 101.3 kPa and initial amine concentrations from 1 to 5 M. Two thermodynamic models, namely semiempirical model and activity coefficient model are developed for the system. The activity coefficient model shows better estimation solubility with an absolute average relative deviation (AARD) of 7.6%. In the comparison between the two models, a comprehensive analysis is presented. Some suggestions are provided for the similar model development. In addition, the speciation plot of CO 2 loaded 1‐(2HE)‐PP solution is predicted based on the activity coefficient model. The predictive pH values agree well with experimental data with AARD of 1.0%. Finally, the potential of 1‐(2‐HE)PP to be an alternative amine in CO 2 capture is evaluated.

Xiao, Min↗

Changing the Mechanism for CO 2 Hydrogenation Using Solvent‐Dependent Thermodynamics

Abstract A critical scientific challenge for utilization of CO 2 is the development of catalyst systems that function in water and use inexpensive and environmentally friendly reagents. We have used thermodynamic insights to predict and demonstrate that the HCo I (dmpe) 2 catalyst system, previously described for use in organic solvents, can hydrogenate CO 2 to formate in water with bicarbonate as the only added reagent. Replacing tetrahydrofuran as the solvent with water changes the mechanism for catalysis by altering the thermodynamics for hydride transfer to CO 2 from a key dihydride intermediate. The need for a strong organic base was eliminated by performing catalysis in water owing to the change in mechanism. These studies demonstrate that the solvent plays a pivotal role in determining the reaction thermodynamics and thereby catalytic mechanism and activity.

Burgess, Samantha A.↗

Effect of SO 2 on oxidation of metallic materials in CO 2 /H 2 O-rich gases relevant to oxyfuel environments: Effect of SO 2 on oxidation of metallic materials

In an oxyfuel plant, heat exchanging metallic components will be exposed to a flue gas that contains substantially higher contents of CO2, water vapor, and SO2 than conventionalflue gases. In the present study, the oxidation behavior of the martensitic steel P92 was studied in CO2-and/or H2O-rich gas mixtures with and without addition of SO2. For this purpose, the corrosion of P92 at 550 8C up to 1000 h in Ar–H2O–SO2, Ar–CO2–SO2, Ar–CO2–O2–SO2 and simulated oxyfuel gas (Ar–CO2–H2O–O2–SO2) was compared with the behavior in selected SO2-free gases. The oxidation kinetics were estimated by a number of methods such as optical microscopy, scanning electron microscopy with energy and wave length dispersive X-ray analysis, glow discharge optical emission spectroscopy, X-ray diffraction as well as transmission electron microscopy. The experimental results revealed that the effect of SO2 addition on the materials behavior substantially differed, depending on the prevailing base gas atmosphere. The various types of corrosion attack affected by SO2 could not be explained by solely comparing equilibrium activities of the gas atmospheres with thermodynamic stabilities of possible corrosion products. The results were found to be strongly affected by relative rates of reactions of the various gas species occurring within the frequently porous corrosion scales as well as at the scale/gas-and scale/alloy interfaces.Whereas SO2 addition to Ar–CO2 resulted in formation of an external mixed oxide/sulflde layer, the presence of SO2 in oxyfuel gas and in Ar–H2O–SO2 resulted in Fe-sulflde formation near the interface between inner and outer oxide layer as well as Cr-sulflde formation in the alloy. In the latter gases, the presence of SO2 seemed to have no dramatic effect on oxide scale growth rates.

36 MATERIALS SCIENCE↗

A New Grain Refiner for Ferritic Steels

A new grain refiner, LaB{sub 6}, was identified for ferritic steels based on the crystallographic calculation using the edge-to-edge matching model. Addition of 0.5 wt pct LaB{sub 6} led to a reduction of the average grain size from 765 to 92 μm and the proportion of the columnar structure from 35 to 8 pct in an as-cast Fe-4Si ferritic alloy. Although LaB{sub 6} was supposed to act as an active inoculant for δ-ferrite, thermodynamic calculation indicated that LaB{sub 6} is not thermodynamically stable in the melt of the Fe-4Si alloy. It was subject to decompose into La and B solutes. Consequently, both La and B reacted with Fe, O and S, forming different compounds. Microstructural examination at room temperature observed La{sub 2}SO{sub 2} and La{sub 2}O{sub 3} particles within the ferrite grains and Fe{sub 2}B along the grain boundaries in the samples. Through EBSD analysis, a reproducible orientation relationship between ferrite and La{sub 2}SO{sub 2} was identified. In addition, the edge-to-edge matching calculation also predicted the high potency for La{sub 2}SO{sub 2} to be an effective nucleant for δ-ferrite. It was considered that the grain refinement of LaB{sub 6} was attributed to the enhanced heterogeneous nucleation of δ-ferrite by La{sub 2}SO{sub 2}, and the solute effect of B due to the high Q-value in ferrite.

36 MATERIALS SCIENCE↗

Reversible aging behavior of La0.8Sr0.2MnO3 electrodes at open circuit

La0.8Sr0.2MnO3 (LSM) electrodes on yttria-stabilized zirconia (YSZ) electrolytes were characterized at open circuit by impedance spectroscopy. An initial irreversible change in the polarization resistance is observed for cells aged with no prior current activation. After the initial break-in, the polarization resistance rises with time at 700 C and decays at 800 C, reversibly, over repeated temperature cycles. The initial irreversible break-in and subsequent reversible cycling behavior suggests multiple processes happening within the time and temperatures measured. The authors propose that these processes are (1) changes in the wetting behavior of the LSM on the YSZ and (2) the reversible segregation/desegregation of cations within LSM. Between 700 C and 800 C, there is a transition temperature at which the segregation behavior of cations to the cathode surface changes. These measurable changes in the impedance behavior of LSM indicate that cation segregation, while considered by some to be part of the cathode activation process, may be dictated by thermodynamic factors, and thus not strictly dependent on the passage of current through the cathode.

99 GENERAL AND MISCELLANEOUS↗

Use of Metallopeptide Based Mimics Demonstrates That the Metalloprotein Nitrile Hydratase Requires Two Oxidized Cysteinates for Catalytic Activity

Nitrile hydratases (NHases) are non-heme Fe{sup III} or non-corrin Co{sup III} containing metalloenzymes that possess an N{sub 2}S{sub 3} ligand environment with nitrogen donors derived from amidates and sulfur donors derived from cysteinates. A closely related enzyme is thiocyanate hydrolase (SCNase), which possesses a nearly identical active-site coordination environment as CoNHase. These enzymes are redox inactive and perform hydrolytic reactions; SCNase hydrolyzes thiocyanate anions while NHase converts nitriles into amides. Herein an active CoNHase metallopeptide mimic, [Co{sup III}NHase-m1] (NHase-m1 = AcNH-CCDLP-CGVYD-PA-COOH), that contains Co{sup III} in a similar N{sub 2}S{sub 3} coordination environment as CoNHase is reported. [Co{sup III}NHase-m1] was characterized by electrospray ionization-mass spectrometry (ESI-MS), gel-permeation chromatography (GPC), Co K-edge X-ray absorption spectroscopy (Co-S: 2.21 {angstrom}; Co-N: 1.93 {angstrom}), vibrational, and optical spectroscopies. We find that [Co{sup III}NHase-m1] will perform the catalytic conversion of acrylonitrile into acrylamide with up to 58 turnovers observed after 18 h at 25 C (pH 8.0). FTIR data used in concert with calculated vibrational data (mPWPW91/aug-cc-TZVPP) demonstrates that the active form of [Co{sup III}NHase-m1] has a ligated SO{sub 2} (? = 1091 cm{sup -1}) moiety and a ligated protonated SO(H) (? = 928 cm{sup -1}) moiety; when only one oxygenated cysteinate ligand (i.e., a mono-SO{sub 2} coordination motif) or the bis-SO{sub 2} coordination motif are found within [Co{sup III}NHase-m1] no catalytic activity is observed. Calculations of the thermodynamics of ligand exchange (B3LYP/aug-cc-TZVPP) suggest that the reason for this is that the SO{sub 2}/SO(H) equatorial ligand motif promotes both water dissociation from the Co{sup III}-center and nitrile coordination to the Co{sup III}-center. In contrast, the under- or overoxidized motifs will either strongly favor a five coordinate Co{sup III}-center or strongly favor water binding to the Co{sup III}-center over nitrile binding.

59 BASIC BIOLOGICAL SCIENCES↗

Mass action model of solution activity via speciation by solvation and ion pairing equilibria

Abstract Solutes and their concentrations influence many natural and anthropogenic solution processes. Electrolyte and solution models are used to quantify and predict such behavior. Here we present a mechanistic solution model based on mass action equilibria. Solvation and ion pairing are used to model speciated solute and solvent concentrations such that they correlate to a solution’s vapor pressure (solvent activity) according to Raoult’s law from dilute conditions to saturation. This model introduces a hydration equilibrium constant ( K ha ) that is used with either an ion dissociation constant ( K id ) or a hydration modifier ( m ) with an experimentally determined ion dissociation constant, as adjustable parameters to fit vapor–liquid equilibrium data. The modeled solvation equilibria are accompanied by molecular dynamics (MD) studies that support a decline in the observed degree of solvation with increased concentration. MD calculations indicate this finding is a combination of a solvent that solvates multiple solutes, and changes in a solute’s solvation sphere, with the dominant factor changing with concentration. This speciation-based solution model is lateral to established electrostatics-based electrolyte theories. With its basis in mass action, the model can directly relate experimental data to the modeled solute and solvent speciated concentrations and structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chapter 3. Understanding the Effects of Composition and Structure on the Oxygen Evolution Reaction (OER) Occurring on NiFeOx Catalysts. IN: Energy and Environment Series No. 22, Integrated Solar Fuel Generators

© The Royal Society of Chemistry 2019. Hydrogen produced by wind- or solar energy-driven electrochemical splitting of water could be used to store renewable electrical energy or to reduce biomass or CO2 to carbon-containing fuels. The potential required for the splitting of water is larger than the thermodynamic potential due to the insufficient activity of the catalysts required for the two half reactions involved in water splitting - the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). The OER and HER occur at the anode and cathode, respectively, of the electrochemical cell. Since the overpotential for the OER can be nearly an order of magnitude larger than that for the HER, considerable attention has been devoted to finding and developing highly active OER catalysts, and in particular those based on earth-abundant elements. To date this goal has been best met with catalysts based on oxides and oxyhydroxides of Ni and Fe for alkaline electrolysis. This chapter reviews the current understanding of such catalysts and examines the role of catalyst synthesis method and percentage of Fe content on catalyst performance. Particular attention is given to the role of Fe3+ cations exchanged into the lattice of NiOOH in enhancing the OER activity of the host material. This issue is discussed from both experimental and theoretical perspectives with the aim of identifying how and why the additions of Fe3+ cations enhance catalyst performance. The chapter ends with a brief overview of recent efforts aimed at identifying elements other than Fe that can be added to Ni oxide to enhance its OER activity and elements that can be added to NiFe oxyhydroxides to further enhance their OER activity.

Bell, Alexis T↗

Functional links between Pt single crystal morphology and nanoparticles with different size and shape: the oxygen reduction reaction case

Design of active and stable Pt-based nanoscale electrocatalysts for the oxygen reduction reaction (ORR) will be the key to improving the efficiency of fuel cells that are needed to deliver reliable, affordable and environmentally friendly energy. Here, by exploring the ORR on Pt single crystals, cubo-octahedral (polyhedral) Pt NPs with different sizes (ranging from 2 to 7 nm), and 7–8 nm Pt NPs with different shapes (cubo-octahedral vs. cube vs. octahedral), we presented a surface science approach capable of rationalizing, and ultimately understanding, fundamental relationships between stability of Pt NPs and activity of the ORR in acidic media. By exploring the potential induced dissolution/re-deposition of Pt between 0.05 and 1.3 V, we found that concomitant variations in morphology of Pt(111) and Pt(100) lead to narrowing differences in activity between Pt single crystal surfaces. We also found that regardless of an initial size or shape, NPs are metastable and easily evolve to thermodynamically equilibrated shape and size with very similar activity for the ORR. We concluded that while initially clearly observed, the particle size and shape effects diminish as the particles age to the point that it may appear that the ORR depends neither on the particle size nor particle shape.

Li, Dongguo↗

The Interaction of Turbulence with Shock Waves

The heliosheath was expected to be turbulent, the result of upstream turbulence and disturbances (shock waves, pressure and density enhancements, structures, etc.) being transmitted across and interacting with the heliospheric termination shock (HTS). A turbulent heliosheath has indeed been observed downstream of the HTS, but the character of the turbulence is significantly different from that of the solar wind. Here, we discuss the transmission of waves and turbulence across the HTS, both analytically and numerically, in the large plasma beta approximation, and we investigate both small amplitude and large-amplitude cases. We find that the linear theory is a reasonable approximation for small amplitude waves incident on the shock. In the case of large amplitude entropy fluctuations incident on the shock, the downstream state is initially one of coherent wave forms, but this rapidly devolves to a highly disturbed state that evolves eventually to a state dominated by vortical structures. Of particular importance, we find that the HTS generates significant levels of downstream compressible turbulence, even in their absence upstream.

79 ASTRONOMY AND ASTROPHYSICS↗

Modified Burgers' equation resulting from a hydrodynamic model of shock waves with reflected particles

Ion reflection at perpendicular, collisionless shock waves is treated in a simple gas dynamical context. The effect of pickup ions reflected by the cross-shock potential and their subsequent energization in the motional electric field is included through the introduction of source terms in the basic inviscid fluid equations. From a weak source description, a Burgers' equation is derived modified by the addition of a quadratically nonlinear term. The construction of Burgers' equation demonstrates explicitly that particle reflection is a dissipation mechanism for collisionless shocks. Numerical solutions for the modified Burgers' equation (MBE) are presented. From these solutions it is implied that the dissipative term of the MBE is associated with the length scale of the shock foot, while the additional term is associated with the shock ramp. The general physical model is discussed in terms of the reflection and energization of pickup ions at outer heliospheric perpendicular shocks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗