Search NASA⌕ Search

SEARCH · Search NASA

Results for “Terminal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Monolithic 4-Terminal 1.2 kV/20 A 4H-SiC Bi-Directional Field Effect Transistor (BiDFET) with Integrated JBS Diodes

In this paper, we report successful fabrication of the first large area, monolithic, 1.2 kV 4H-SiC Bi-Directional FETs (BiDFETs) with integrated JBS diodes in a 6-inch commercial foundry for use in matrix converters. The fabricated BiDFETs support high voltage (>1.2 kV) in the first and third quadrants. They exhibit very low on-resistance of 50 mΩ in the on-state in both quadrants when the 20 V gate bias is applied to both gates, allowing conduction of 20 A with 1 V drop. Fully gate voltage controlled output characteristics are also confirmed in both quadrants.

4-Quadrant switch↗

Ultra-Fast 4H-SiC LGAD With Etched Termination and Field Plate

The design, fabrication, and demonstration of a novel Silicon Carbide Low Gain Avalanche Detector (4HSiC LGAD), exhibiting an ultra-fast time response and excellent time resolution, are reported. Here, the use of field plates is proposed to suppress the high electric field caused by the negative bevel-etched angle in 4H-SiC LGADs based on TCAD simulations. Experimental measurements confirm that the field plate significantly increases the breakdown voltage of the 4H-SiC LGADs. Gain and time resolution are measured by using the ultraviolet transient current technique (UV-TCT) showing that 4H-SiC LGADs possess excellent timing performance, with a time resolution better than 35 ps for the injected laser signal with single minimum ionizing particle (MIP) charges generation at room temperature. Additionally, the gain suppression effect in a 4H-SiC LGAD is observed for the first time.

43 PARTICLE ACCELERATORS↗

Frequency Response and Congestion Management using Multi-Terminal HVDC Overlay

Continental level power system interconnections using a High Voltage direct current (HVDC) transmission lines have been considered to bring economic benefits such as interregional power exchange. This paper describes the modeling process and studies the technical benefits of having multiple HVDC lines, including a grid of HVDC lines (macrogrid) configuration, connecting the North American Eastern and Western electric power interconnections. The models developed provide steady state and stability analysis for multiple HVDC overlay topologies and provide technical benefit analysis in terms of frequency response and congestions management. The paper also provides a comparison of different HVDC topologies performance and their grid support in case of major disturbances

Tbaileh, Ahmad↗

Distributed Finite-Time Termination for Consensus Algorithm in Switching Topologies

Here, in this article, we present a finite-time stopping criterion for consensus algorithms in networks with dynamic communication topology. Prior state of the art has established convergence to the consensus value; however, the asymptotic convergence of these algorithms poses a challenge in practical settings where the response from agents is required in finite time. To this end, we propose a maximum-minimum protocol that propagates the global maximum and minimum values of agent states (while running the consensus algorithm) in the network. This article focuses on establishing that the global maximum and minimum values are strictly monotonic even for a dynamic topology, and they can be used to distributively ascertain the closeness to convergence in finite time. We rigorously show that each node can have access to the global maximum and minimum by running the proposed maximum-minimum protocol to realize a finite-time stopping criterion for the otherwise asymptotic consensus algorithm. The practical utility of the algorithm is illustrated through experiments where each agent is instantiated by a NodeJS socket.io server.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Enhanced nucleation mechanism in ruthenium atomic layer deposition: Exploring surface termination and precursor ligand effects with RuCpEt(CO)2

Miniaturization of microelectronic devices necessitates atomic precision in manufacturing techniques, particularly in the deposition of thin films. Atomic layer deposition (ALD) is recognized for its precision in controlling film thickness and composition on intricate three-dimensional structures. This study focuses on the ALD nucleation and growth mechanisms of ruthenium (Ru), a metal that has significant future implications for microelectronics. Despite its advantages, the deposition of a high surface-free energy material like Ru on a low surface-free energy material such as an oxide often faces challenges of large nucleation delays and non-uniform growth. To address these challenges, we explored the effectiveness of organometallic surface pretreatments using trimethylaluminum (TMA) or diethylzinc (DEZ) to enhance Ru film nucleation and growth. Our study employed a less-studied Ru precursor, cyclopentadienylethyl(dicarbonyl)ruthenium [RuCpEt(CO)2], which demonstrated promising results in terms of reduced nucleation delay and increased film continuity. Ru ALD was performed on silicon substrates with native oxide, using RuCpEt(CO)2 and O2 as coreactants. Our findings reveal that surface pretreatment significantly improves nucleation density and film thickness within the initial 60 ALD cycles, achieving up to a 3.2-fold increase in Ru surface coverage compared to nonpretreated substrates. Supported by density functional theory calculations, we propose that the enhanced nucleation observed with RuCpEt(CO)2 compared to previously-studied Ru(Cp)2 is due to two key mechanisms: the facilitated removal of CO ligands during deposition, which enhances the reactivity of the precursor, and a hydrogen-abstraction reaction involving the ethyl ligand of RuCpEt(CO)2 and the metal-alkyl groups on the surface. This study not only advances our understanding of Ru ALD processes but also highlights the significant impact of precursor chemistry and surface treatments in optimizing ALD for advanced microelectronic applications.

Materials Science↗

MbnC Is Not Required for the Formation of the N-Terminal Oxazolone in the Methanobactin from Methylosinus trichosporium OB3b

A number of environmental and medical applications have been proposed for MBs, including bioremediation of toxic metals and nanoparticle formation, as well as the treatment of copper- and iron-related diseases. However, before MBs can be modified and optimized for any specific application, the biosynthetic pathway for MB production must be defined.

59 BASIC BIOLOGICAL SCIENCES↗

Frozen Hydrometeor Terminal Fall Velocity Dependence on Particle Habit and Riming as Observed by Vertically Pointing Radars

Vertically pointing Ka-band radar measurements are used to derive fall velocity–reflectivity factor ($V$ t = $aZ$$^{b}_{e}$) relations for frozen hydrometeor populations of different habits during snowfall events observed at Oliktok Point, Alaska, and at the Multidisciplinary Drifting Observatory for the Study of Arctic Climate (MOSAiC). Case study events range from snowfall with highly rimed particles observed during periods with large amounts of supercooled liquid water path (LWP > 320 g m –2 ) to unrimed snowflakes including instances when pristine planar crystals were the dominant frozen hydrometeor habit. The prefactor a and the exponent b in the observed $V$ t –$Z$ e relations scaled to the sea level vary in the approximate ranges 0.5–1.4 and 0.03–0.13, respectively (reflectivities are in mm 6 m –3 and velocities are in m s –1 ). The coefficient a values are the smallest for planar crystals (a ~ 0.5) and the largest (a > 1.2) for particles under severe riming conditions with high LWP. There is no clear distinction between b values for high and low LWP conditions. The range of the observed $V$ t –$Z$ e relation coefficients is in general agreement with results of modeling using fall velocity–size (υ t = αD β ) relations for individual particles found in literature for hydrometeors of different habits, though there is significant variability in α and β coefficients from different studies even for a same particle habit. Correspondences among coefficients in the $V$ t –$Z$ e relations for particle populations and in the individual particle υ t –$D$ relations are analyzed. Furthermore, these correspondences and the observed $V$ t –$Z$ e relations can be used for evaluating different frozen hydrometeor fall velocity parameterizations in models.

54 ENVIRONMENTAL SCIENCES↗

Interactions between terminal ribosomal RNA helices stabilize the E. coli large ribosomal subunit

The ribosome is a large ribonucleoprotein assembly that uses diverse and complex molecular interactions to maintain proper folding. In vivo assembled ribosomes have been isolated using MS2 tags installed in either the 16S or 23S ribosomal RNAs (rRNAs), to enable studies of ribosome structure and function in vitro. RNA tags in the Escherichia coli 50S subunit have commonly been inserted into an extended helix H98 in 23S rRNA, as this addition does not affect cellular growth or in vitro ribosome activity. Here, we find that E. coli 50S subunits with MS2 tags inserted in H98 are destabilized compared to wild-type (WT) 50S subunits. We identify the loss of RNA–RNA tertiary contacts that bridge helices H1, H94, and H98 as the cause of destabilization. Using cryogenic electron microscopy (cryo-EM), we show that this interaction is disrupted by the addition of the MS2 tag and can be restored through the insertion of a single adenosine in the extended H98 helix. This work establishes ways to improve MS2 tags in the 50S subunit that maintain ribosome stability and investigates a complex RNA tertiary structure that may be important for stability in various bacterial ribosomes.

59 BASIC BIOLOGICAL SCIENCES↗