SEARCH · Search NASA

Results for “Tethering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Electrical behavior of a Shuttle Electrodynamic Tether System /SETS/

Many novel electrodynamic and space plasma physics experiments can be done from the space shuttle using a gravity gradient stabilized subsatellite tethered 10-30 km above the Orbiter via a long, conducting wire which is insulated from the ionospheric plasma. This system, called the Shuttle Electrodynamic Tether System (SETS), is described in the present paper with emphasis upon the various electrical processes which determine its coupling to the ambient plasma. The three most important physical effects include sheath formation and electron collection by the subsatellite, the generation of a large emf through the orbital motion of the tether across geomagnetic field lines, and the active ejection of electrons from the Orbiter into the surrounding ionosphere. An electrical circuit analogy is presented for SETS together with a brief outline of possible areas related to the artificial generation of magnetohydrodynamic waves.

Banks, P. M.↗

NASA NTRS1982

Measurement of vehicle potential using a mother-daughter tethered rocket

The equipment, experimental design, and results of mother-daughter tethered probes for measuring the potential of a spacecraft are described. The object was to inject a probe into the ionosphere by rocket and then lower an impedance voltage monitor-equipped section of the probe by means of a highly insulated wire. The mother probe, also carrying voltage monitors, would inject charges into the plasma that would be measured at both ends of the tether. Instrumentation on the daughter probe included voltage current monitors and a Langmuir probe, while the mother payload also carried a charge probe, floating probe, a Langmuir probe, and an impedance probe. The first launch was from Japan in 1980, and operations confirmed that Langmuir probes with area ratios less than 400:1 can produce changes in the vehicle potential if probe voltages of more than 10 V are applied in the collection mode. A ratio of 200:1 was sufficient for the daughter probe with voltages of 5 V. The experiment is concluded to verify the tethered probe method of measuring vehicle potential.

Williamson, P. R.↗

NASA NTRS1984

Tension waves in tethered satellite cables

A one-degree-of-freedom simulation of the Tethered Satellite System (TSS) was programmed using a distributed system model of the tether based on the one-dimensional wave equation. This model represents the time varying tension profile along the tether as the sum of two traveling waves of tension moving in opposite directions. A control loop was devised which combines a deployment rate command with the measured tension at the deployer to produce a smooth, stable rate of deployment of the subsatellite. Simulation results show a buildup of periodic bursts of high frequency oscillation in tension. This report covers the mathematical modelling and simulation results and explains the reason for the observed oscillations. The design of a possible vibration damping device is discussed.

Lallman, F. J.↗

NASA NTRS1984

Propellant transfer: Tethered depot

Spacebasing of orbital transfer vehicles at a space station requires a depot that safely and efficiently stores and transfers the resupply propellants. In order to transfer propellants, a method effectively acquire only liquid and vent only gas must exist. A method that produces a low gravity to settle propellants would bypass these weaknesses, while allowing ground-like operations. This low gravity can be passively produced using gravity gradient techniques. A satellite with a large length to diameter ratio, such as a depot attached to a space station with a tether, stabilizes along on Earth radial because of an outward acceleration proportional to the distance from the satellite's center of gravity. Analysis indicates that liquid can be setteled with relatively short tether lengths. The feasibility, design requirements, and operational limitations of a tethered refueling depot were investigated with special emphasis on slosh control.

Kroll, K.↗

NASA NTRS1985

Applications of Tethers in Space, Volume 1

The tethered satellite system is described including tether fundamentals. Applications of very long tethers in space to a broad spectrum of future space missions are explored. Topics covered include: science, transportation, constellations, artificial gravity, technology and test, and electrodynamic interactions. Recommendations to NASA are included.

Alfred C. Cron↗

NASA NTRS1980

Shuttle-tethered satellite system definition study extension

A system requirements definition and configuration study (Phase B) of the Tethered Satellite System (TSS) was conducted during the period 14 November 1977 to 27 February 1979. Subsequently a study extension was conducted during the period 13 June 1979 to 30 June 1980, for the purpose of refining the requirements identified during the main phase of the study, and studying in some detail the implications of accommodating various types of scientific experiments on the initial verification flight mission. An executive overview is given of the Tethered Satellite System definition developed during the study. The results of specific study tasks undertaken in the extension phase of the study are reported. Feasibility of the Tethered Satellite System has been established with reasonable confidence and the groundwork laid for proceeding with hardware design for the verification mission.

Source record↗

NASA NTRS1984

Electrodynamic tethers. I - Power generation in LEO. II - Thrust for propulsion & power storage

The power gain and thrust for plasma engines available by unreeling 10 km of insulated Al wire from a spacecraft are investigated. The wire, unreeling in the vertical, would cut the earth's magnetic field lines, thereby generating 20 kW of power in the wire. A drag loss of 20.4 kJ/sec would reduce the power gain to 18.7 kW, an efficiency of 92 percent. Thicker wires could push the power gain to 1 MW at 95 percent efficiency. Conductive 'balloons' at the ends of the tether would function as ionospheric 'brushes' to complete the circuit. Reversing the IXB force by employing on-board stored power would drive the tether current against the induced voltage, providing a 1 N thrust for 8 kW of energy consumed, which could be supplied by solar panels during the day portion of orbit. The equivalent thrust by conventional stationkeeping means would consume 8000 kg of propellant/yr. Techniques for stabilizing the tether in the presence of variable magnetic fields are discussed.

Mccoy, J. E.↗

NASA NTRS1985

A Space Station tethered orbital refueling facility

A planned function of the Space Station is to refurbish and refuel an advanced space-based LO2/LH2 orbit transfer vehicle. An alternative to propellant storage at the station is to use a remote facility tied to the station with a long tether. Preliminary design of such a facility is described with emphasis on fluid transfer and storage requirements. Using tether lengths of at least 300 ft, gravity gradient forces will dominate surface tension in such a system. Although gravity driven transfer is difficult because of line pressure drops, fluid settling over the tank outlet greatly alleviates acquisition concerns and will facilitate vented tank fills. The major concern with a tethered orbital refueling facility is its considerable operational complexity including transport of the OTV to and from the facility.

Fester, D. A.↗

NASA NTRS1985

The definition of the Shuttle Tethered Aerothermodynamic Research Facility

Studies have been conducted to define the feasibility and practical limitations of the Shuttle Orbiter Tethered 'wind-tunnel' concept. This concept, referred to as the Shuttle Tethered Aerothermodynamic Research Facility (STARFAC), is proposed to provide researchers access to altitudes above 90 km to accomplish aerothermodynamic research in the rarefied upper atmosphere. Determining the feasibility and limitations of the concept has required the enhancement and/or development of mission simulation analytical techniques and control laws; the accomplishment of candidate mission simulations; the definition of instrumentation requirements, both for science and engineering; and the establishment of tether and satellite design requirements to meet STARFAC objectives. The results of the study, to date, indicate that such a concept is both feasible and practical. Representative results are presented, as are recommendations for continued studies which would result in program implementation.

Siemers, P. M., III↗

NASA NTRS1986

Analytical investigation of the dynamics of tethered constellations in Earth orbit, phase 2

The development of a two dimensional analytical model that describes the dynamics of an n-mass vertical tethered system is reported. Two different approaches are described: in the first one the control quantities are the independent variables while in the second one the Cartesian coordinates of each mass expressed in the orbiting reference frame are the independent variables. The latter model was used in the 3-mass version to simulate the dynamics of the tethered system in applications involving the displacement of the middle mass along the tether. In particular, issues related to reproducing predetermined acceleration profiles and g-tuning are reported.

Lorenzini, E.↗

NASA NTRS1986

Tethered orbital refueling study

Objectives are to evaluate the feasibility and limitations of fluid acquisition and transfer under an accleration induced in a tethered orbital refueling facility and to provide conceptual designs. Program tasks consist of recommendation of fluid transfer method and parameters; evaluation of disturbances, fluid motion, and damping; selection of passive devices to augment inherent fluid damping and determination of the resultant envelope of operation; assessment of the effect of tether lengths on hazards; and identification of ground and flight tests necessary to prove the tethered orbital refueling concepts.

Fester, D. A.↗

NASA NTRS1986

Electrodynamic tether technology considerations

The electrodynamic tether operation was studied. Plasma contactors, power management and conditioning, and exposure of materials were considered. Multikilowatt electrodynamic tether systems need a variety of supporting technologies in order to be viable. The area of interface between the high voltage end of the electrodynamic tether and the user was not addressed, however, it must be in order for the successful and safe operation of the system.

Kolecki, J. C.↗

NASA NTRS1986

Tethered satellite system

A reusable system is to be developed to enable a variety of scientific investigations to be accomplished from the shuttle, considering the use of a tethered system with manual or automated control, deployment of a satellite toward or away from the Earth, up to 100 km, and conducting or nonconducting tether. Experiments and scientific investigations are to be performed using the tether system for applications such as magnetometry, electrodynamics, atmospheric science, and chemical release. A program is being implemented as a cooperative U.S./Italian activity. The proposed systems, investigations, and the program are charted and briefly discussed.

Sisson, J.↗

NASA NTRS1986

Tether applications for space station

A wide variety of space station applications for tethers were reviewed. Many will affect the operation of the station itself while others are in the category of research or scientific platforms. One of the most expensive aspects of operating the space station will be the continuing shuttle traffic to transport logistic supplies and payloads to the space station. If a means can be found to use tethers to improve the efficiency of that transportation operation, it will increase the operating efficiency of the system and reduce the overall cost of the space station. The concept studied consists of using a tether to lower the shuttle from the space station. This results in a transfer of angular momentum and energy from the orbiter to the space station. The consequences of this transfer is studied and how beneficial use can be made of it.

Nobles, W.↗

NASA NTRS1986

Tethered constellations

The studies that have been carried out on Tethered Constellations are briefly addressed. A definition of a tethered constellation is any number of masses/platforms greater that two connected by tethers in a stable configuration. Configurations and stability constraints are reviewed. Conclusions reached are: (1) The 1-D, horizontal, passively stabilized constellations have been ruled out; (2) Fishbone constellations have been also ruled out; (3) Alternative stable 2-D configurations have been devised such as the quadrangular configuration stabilized by electrodynamic forces (ESC), the quadrangular configuration stabilized by differential air drag (DSC), and the pseudo elliptical configuration stabilized by electrodynamic forces (PEC). Typical dimensions for these constellations are 10 km (horizontal) by 20 km (vertical) with balloon diameters around 100 m in the case of a DSC and a power consumption around 7 KW for an ESC or PEC.

Lorenzini, E.↗

NASA NTRS1986

The investigation of tethered satellite system dynamics

The analysis of the rotational dynamics of the satellite was focused on the rotational amplitude increase of the satellite, with respect to the tether, during retrieval. The dependence of the rotational amplitude upon the tether tension variation to the power 1/4 was thoroughly investigated. The damping of rotational oscillations achievable by reel control was also quantified while an alternative solution that makes use of a lever arm attached with a universal joint to the satellite was proposed. Comparison simulations between the Smithsonian Astrophysical Observatory and the Martin Marietta (MMA) computer code of reteival maneuvers were also carried out. The agreement between the two, completely independent, codes was extremely close, demonstrating the reliability of the models. The slack tether dynamics during reel jams was analytically investigated in order to identify the limits of applicability of the SLACK3 computer code to this particular case. Test runs with SLACK3 were also carried out.

Lorenzini, E. C.↗

NASA NTRS1986

Future applications of tethers in space

Various experiments with tethered satellite systems (TSS) have reached the stage of being considered for demonstration programs as follow-ups to the planned electrodynamic power system and atmospheric missions at the close of the 1980s. All TSS operations involve an initial separation thrust to a tethered object and then begin transferring angular momentum from one object to another while preserving the total angular momentum. The demonstrations include tethered launch of an Orbiter payload to a higher orbit, deployment of the Orbiter from the Space Station (SS), and launch of an Orbital Transfer Vehicle from the SS. The operations can be sequential, with the Orbiter providing the SS with an upward boost while being lowered to an easier deorbit position, followed by the SS releasing on OTV (or a repaired Space Telescope) to a higher orbit while the SS returns to a more favorable lower orbit.

Von Tiesenhausen, G.↗

NASA NTRS1985

Tethered orbital propellant depot

A planned function of the Space Station is to refurbish and refuel an advanced space-based LO2/LH2 orbit transfer vehicle. An alternative to propellant storage at the station is to use a remote facility tied to the station with a log tether. Preliminary design of such a facility is described with emphasis on fluid transfer and storage requirements. Using tether lengths of at least 300 ft, gravity gradient forces will dominate surface tension in such a system. Although gravity given transfer is difficult because of line pressure drops, fluid settling over the tank outlet greatly alleviates acquisition concerns and will facilitate vented tank fills. The major concern with a tethered orbital refueling facility is its considerable operational complexity including transport of the OTV to and from the facility.

Fester, D. A.↗